aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel/setup.c
AgeCommit message (Collapse)Author
2009-06-11sh: rework mode pin codeMagnus Damm
This patch reworks the mode pin code to keep the pin definitions in one place. The mode pins values are now the value of the bit instead of bit number. With this patch in place the sh7785 header file contains mode pin comments. The sh7785 clock code and the sh7785lcr board code are updated to reflect the new shared mode pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: boot word / mode pin support V2Magnus Damm
Add mode pin support for the SuperH architecture V2. With this patch applied the board code can add their own function to export the cpu mode pin configuration. In most cases this will be a constant bitmap, but boards that allow reading this from a register can instead read out the pin state from hardware. The code warns if a pin is tested but no board specific mode pin function has been provided. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: Kill off the GENERIC_CALIBRATE_DELAY ifndef.Paul Mundt
Now that everyone is using the clock framework directly and we unconditionally provide our own calibrate_delay() function, having it wrapped in an ifndef is no longer useful. So, kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-19Merge branches 'sh/earlytimer' and 'sh/shmobile-r2r-staging'Paul Mundt
2009-04-19sh: Add plat_early_device_setup()Magnus Damm
Add a plat_early_device_setup() function to allow processor-specific code to register Early Platform Data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype.Kuninori Morimoto
This implements initial support for the SH-Mobile R2R CPU. Based on Rev 0.11 of the initial SH7724 hardware manual. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: Fix up -Wformat-security whining.Paul Mundt
Triggers -Werror on gcc-4.3: arch/sh/kernel/setup.c: In function 'early_parse_mem': arch/sh/kernel/setup.c:111: error: format not a string literal and no format arguments ... Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.Paul Mundt
This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores that implement the PTAEX register and respective functionality. Presently only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs). The main change is in how the PTE is written out when loading the entry in to the TLB, as well as in how the TLB entry is selectively flushed. While SH-X2 extended mode splits out the memory-mapped U and I-TLB data arrays for extra bits, extended ASID mode splits out the address arrays. While we don't use the memory-mapped data array access, the address array accesses are necessary for selective TLB flushes, so these are implemented newly and replace the generic SH-4 implementation. With this, TLB flushes in switch_mm() are almost non-existent on newer parts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: Add support for SH7786 CPU subtype.Kuninori Morimoto
This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: Only reserve memory under CONFIG_ZERO_PAGE_OFFSET when it != 0.Christopher SMITH
Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add support for SH7201 CPU subtype.Peter Griffin
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: add dynamic crash base address supportMagnus Damm
Add support for dynamic crash kernel base address. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Fix up some merge damage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Fix debugfs_create_dir's error checking method for arch/sh/kernel/Zhaolei
debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Derive calibrate_delay lpj from clk fwk.Paul Mundt
All CPUs must have a sensible cpu_clk definition these days, which we can safely use for deriving the preset loops_per_jiffy. The only odd one out is SH-5, which hasn't been hammered in to the framework yet. Based on the ST patch. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Carl Shaw <carl.shaw@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Fix an unusual memory initialisation error.Stuart Menefy
This fixes a problems with the set up of Linux memory: - When reserving memory at boot time, the code previously reserved the bottom page of memory, and then from one page up to the end of the bootmap. This had the desired effect, but was strictly speaking wrong, as the one page was actually whatever CONFIG_ZERO_PAGE_OFFSET had been set to. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Fix up broken 32-bit initrd support.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: fixup many sparse errors.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: crash kernel resource fixMagnus Damm
The reserved crash kernel memory range is currently missing from /proc/iomem. crashk_res is mistakenly setup after __add_active_range(). Reorder things to make sure the resource shows up in /proc/iomem. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02kdump: sh: parse elfcorehdr command line argumentSimon Horman
A quick cut and paste from other architectures to allow SH to parse the elfcorehdr command line argument which is required for both is_kdump_kernel() and vmcore to function. (the former is as yet unused on SH). Tested compilation only Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Stub in silicon cut in CPU info.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: export get_cpu_subtypeAdrian Bunk
This patch fixes the following build error: <-- snip --> ... MODPOST 1837 modules ERROR: "get_cpu_subtype" [arch/sh/oprofile/oprofile.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: display boot params by default on entry.Paul Mundt
Some kernel and boot loader configurations tweak the .empty_zero_page settings, while others do not. Print the values out on entry as a debugging aid. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add memory resources to /proc/iomemMagnus Damm
Add physical memory resources such as System RAM, Kernel code/data/bss and reserved crash dump area to /proc/iomem. Same strategy as on x86. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add kernel bss resourceMagnus Damm
Do like everyone else and have a struct resource for kernel bss. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Some symbol exports to make the allmodconfig happier.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Initial support for the MX-G CPU.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Create an sh debugfs root.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: add support for sh7366 processorMagnus Damm
This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-07Use BOOTMEM_EXCLUSIVE for kdumpBernhard Walle
Use the BOOTMEM_EXCLUSIVE, introduced in the previous patch, to avoid conflicts while reserving the memory for the kdump capture kernel (crashkernel=). Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Introduce flags for reserve_bootmem()Bernhard Walle
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28sh: constify function pointer tablesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7763 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Encode L1/L2 cache shape in auxvt.Paul Mundt
This adds in the L1I/L1D/L2 cache shape support to their respective entries in the ELF auxvt, based on the Alpha implementation. We use this on the userspace libc side for calculating a tightly packed SHMLBA amongst other things. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Clean up places that make 29-bit physical assumptions.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add a printk() to warn legacy mem= growers.Stuart Menefy
mem= can't be used to grow the size of kernel memory, so provide a warning to that effect. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7263 CPU support.Paul Mundt
This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7203 CPU support.Paul Mundt
This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add the SH-5 cpu type symbolic names.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30sh: Move zero page param defs somewhere sensible.Paul Mundt
Follows s390 and others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30sh: Kill off legacy embedded ramdisk section.Paul Mundt
When the SH kernel used to support embedding a ramdisk in the pre-initramfs days it was placed in a special section and made to look like a regular initrd. Since that was removed ages ago, kill off the remaining cruft that was missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30sh: Fix up early mem cmdline parsing.Paul Mundt
memory_end was being clobbered by whatever the kernel config had specified, rather than obeying the setup option. Fix this up so that memory_end is only initialized if nothing has been set on the command line. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-19Use extended crashkernel command line on shBernhard Walle
This patch removes the crashkernel parsing from arch/sh/kernel/machine_kexec.c and calls the generic function, introduced in the generic patch, in setup_bootmem_allocator(). This is necessary because the amount of System RAM must be known in this function now because of the new syntax. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21sh: Plug plat_smp_setup() in to generic setup path.Paul Mundt
Now that the SMP stubs are in place, call in to the setup code to be defined by the platform. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Kill off special boot_cpu_data.Paul Mundt
This consolidates the cpu_data definitions and gets rid of the special boot_cpu_data. It's made a wrapper to the boot CPU, in order to keep the existing in-tree users happy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add SH7720 CPU support.Markus Brunner
This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>