aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel
AgeCommit message (Collapse)Author
2009-06-01sh: hook up shared div4 clock code to sh7785Magnus Damm
Hook up the shared 4-bit divisor clock code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared div4 clock codeMagnus Damm
Add shared code for 4-bit divisor clocks. Processor specific code can use SH_CLK_DIV4() to initialize div4 clocks, and then use sh_clk_div4_register() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: hook up shared mstp32 clock code to sh7785Magnus Damm
Hook up the shared 32-bit module stop bit code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared mstp32 clock codeMagnus Damm
Add shared 32-bit module stop bit clock support. Processor specific code can use SH_CLK_MSTP32() to initialize module stop bit clocks, and then use sh_clk_mstp32() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: SH7724 has an L2 cache.Kuninori Morimoto
Add the CPU_HAS_L2_CACHE flag to SH7724. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785 pll configuration from mode pinMagnus Damm
This patch modifies the sh7785 clock code to use the MODE4 value to switch between 72x and 36x PLL multiplication. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: boot word / mode pin support V2Magnus Damm
Add mode pin support for the SuperH architecture V2. With this patch applied the board code can add their own function to export the cpu mode pin configuration. In most cases this will be a constant bitmap, but boards that allow reading this from a register can instead read out the pin state from hardware. The code warns if a pin is tested but no board specific mode pin function has been provided. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26Merge branch 'sh/clkfwk'Paul Mundt
2009-05-26sh: remove clk_ops->build_rate_table()Magnus Damm
This patch removes the ->build_rate_table() callback, ->recalc() may instead be used for this purpose. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: use shared frequency tables on sh7785Magnus Damm
This patch converts the sh7785 clock code to make use of clk_rate_table_build() and clk_rate_table_round(). The ->build_rate_table() callback is removed, the table building is instead handled in ->recalc(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add shared clock framework frequency table codeMagnus Damm
Add SuperH-specific clock framework helper functions: - clk_rate_table_build() - build cpufreq table from divisors/multipliers - clk_rate_table_round() - use cpufreq table to find matching frequency Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add pll_clk to sh7785Magnus Damm
This patch converts the sh7785 pll implementation from the all-in-one code in frqmr_recalc() and frqmr_build_rate_table() to a separate struct clk. This allows us to remove the processor specific multiplier and use generic rate table functions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: irq: Fix up imask build warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: Make clock-cpg usable for non-legacy platforms.Paul Mundt
This adds a new SH_CLK_CPG for parts that have CPG support. SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set for platforms that want clock-cpg to register the legacy clocks. With this new config item in place, it is now possible to start layering more generic CPG code in place while other platforms transition off of the legacy clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily.Paul Mundt
irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in -next, but as we can not presently enable SPARSE_IRQ without the early irq_desc alloc patch, protect it with an ifdef until the interface has settled and we are ready to enable it system-wide. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: beyond ARRAY_SIZE of onchip_ops for sh7722.Roel Kluin
Do not go beyond ARRAY_SIZE of onchip_ops Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk branch compile fix for clock-sh7722Magnus Damm
Fix clkfwk branch compile error in clock-sh7722.c. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Provide an arch_probe_nr_irqs() that wraps the machvec def.Paul Mundt
This is just a simple arch_probe_nr_irqs() stub that wraps to the platform defined number of IRQs. This can be made gradually more intelligent based on what we can infer from the INTC tables and so on. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Teach ipr and intc about dynamically allocating irq_descs.Paul Mundt
This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Convert from irq_desc[] to irq_to_desc().Paul Mundt
This converts a few places that were using the old irq_desc[] array over to the shiny new irq_to_desc() helper. Preperatory work for sparse irq support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Rework the SR.IMASK bitmap handling.Paul Mundt
This tidies up how the SR.IMASK bitmap is managed, using the bitmap API directly instead. At the same time, tidy up the irq_chip conversion a bit. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: intc tables for sh7770Magnus Damm
This patch adds INTC tables for sh7770, thanks goes to Paul for the first prototype version. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: clkfwk: Add MSTP bits to SH7785 clock framework.Paul Mundt
This plugs in all of the MSTP functions in to the clock framework, and hands them off to the platform devices that want them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Map tree hierarchy in debugfs.Paul Mundt
This adopts the OMAP clock framework debugfs bits and replaces the aging procfs bits. The procfs clocks entry was primarily a debugging aid, and used to be tied in to cpuinfo before the clock list grew too unweildly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: rate table construction and rounding for SH7785.Paul Mundt
This adds support for constructing a rate table by looking at potential divisors for a specified clock. Each FQRMR clock is given its own table. Presently each table is rebuilt when the parent propagates down a new rate, so some more logic needs to be added to do this more intelligently. Additionally, a fairly generic round_rate() implementation is then layered on top of it, which subsequently provides us with cpufreq support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Update SH7785 for refactored clock framework.Paul Mundt
This updates the SH7785 CPU code as well as the SH7785LCR board support code for making use of the newly refactored clock framework. Support for the legacy CPG clocks is dropped at this point, with the extal frequency fed in from the board code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Rework legacy CPG clock handling.Paul Mundt
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with them on their own, CPUs can gradually move over to the new interface. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Provide a generic clk_set_rate_ex() path for root clocks.Paul Mundt
In the case of root clocks (such as clkin oscillators, extal, etc.), the rate information is entirely platform dependent and needs to be lazily set and propagated from the platform code. This provides a method for establishing the rate update on these types of clocks that define no set_rate() op of their own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Handle NULL clkops for root clocks.Paul Mundt
root clocks may simply be placeholders for rate and ancestry information, and have no real associated operations of their own. Account for this, so we are still able to use these sorts of clocks for rate propagation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: module_clk -> peripheral_clk rename.Paul Mundt
For consistenct naming, and to allow us to fix up some confusion in the SH-Mobile clock framework, amongst other places. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12Merge branch 'master' into sh/clkfwkPaul Mundt
2009-05-12sh: Kill off the remnants of the old timer code.Paul Mundt
Now with all of the TMU users moved over to the new TMU driver, and the old TMU driver killed off, the left-over infrastructure can go along with it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: remove old TMU driverMagnus Damm
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c) As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU and configure timer channel using platform data. If multiple TMU channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_tmu.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: CMT platform data for sh7720/sh7721Magnus Damm
This patch adds CMT platform data for sh7720 and sh7721. All 5 32-bit CMT channels unfortunately share a single IRQ. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7720/sh7721Magnus Damm
This patch adds TMU platform data for sh7720 and sh7721. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7710/sh7712Magnus Damm
This patch adds TMU platform data for sh7710 and sh7712. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7706/sh7707/sh7708/sh7709Magnus Damm
Add TMU platform data for sh7706/sh7707/sh7708/sh7709. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7705Magnus Damm
This patch adds TMU platform data for sh7705. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7724Magnus Damm
This patch adds TMU platform data for sh7724. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7366Magnus Damm
This patch adds TMU platform data for sh7366. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7343Magnus Damm
This patch adds TMU platform data for sh7343. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: add sh4-202 INTC tablesMagnus Damm
This patch adds INTC tables for sh4-202 with support for HUDI, TMU0, TMU1, TMU2, RTC, SCIF and WDT. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh4-202Magnus Damm
This patch adds TMU platform data for sh4-202. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7770Magnus Damm
This patch adds TMU platform data for sh7770. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7763Magnus Damm
This patch adds TMU platform data for sh7763. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Use arch_clk_init() for on-chip clock registration.Paul Mundt
CPUs registering on-chip clocks should be using arch_clk_init() with the new scheme so that the CPUs have the opportunity to establish the topology prior to the initial root clock rate propagation. This ensures that CPUs with on-chip clocks that use CLK_ENABLE_ON_INIT are properly enabled at the initial propagation time, without having to further poke the root clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Handle clk_get_sys() returning an ERR_PTR.Paul Mundt
clk_get() needs to also perform an IS_ERR() check to see whether clk_get_sys() failed or not. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Wire up clk_get_sys() support.Paul Mundt
This stubs in clk_get_sys() from the ARM clkdev implementation. Tentatively conver the clk_get() lookup code to use this, and once the rest of the in-tree users are happy with this, it can replace the fallback lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Kill off clk_recalc_rate().Paul Mundt
The only user for this is the SH-Mobile r_clk, which is now added as a root clock and can be kicked via propagate_rate() as usual. Given that, there is no longer any need for the special clk_recalc_rate(), so we kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Tidy up on-chip clock registration and rate propagation.Paul Mundt
This tidies up the set_rate hack that the on-chip clocks were abusing to trigger rate propagation, which is now handled generically. Additionally, now that CLK_ENABLE_ON_INIT is wired up where it needs to be for these clocks, the clk_enable() can go away. In some cases this was bumping up the refcount higher than it should have been. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 17:23:38 +0000