aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2009-01-06remove linux/hardirq.h from asm-generic/local.hRussell King
While looking at reducing the amount of architecture namespace pollution in the generic kernel, I found that asm/irq.h is included in the vast majority of compilations on ARM (around 650 files.) Since asm/irq.h includes a sub-architecture include file on ARM, this causes a negative impact on the ccache's ability to re-use the build results from other sub-architectures, so we have a desire to reduce the dependencies on asm/irq.h. It turns out that a major cause of this is the needless include of linux/hardirq.h into asm-generic/local.h. The patch below removes this include, resulting in some 250 to 300 files (around half) of the kernel then omitting asm/irq.h. My test builds still succeed, provided two ARM files are fixed (arch/arm/kernel/traps.c and arch/arm/mm/fault.c) - so there may be negative impacts for this on other architectures. Note that x86 does not include asm/irq.h nor linux/hardirq.h in its asm/local.h, so this patch can be viewed as bringing the generic version into line with the x86 version. [kosaki.motohiro@jp.fujitsu.com: add #include <linux/irqflags.h> to acpi/processor_idle.c] [adobriyan@gmail.com: fix sparc64] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06atomic_t: unify all arch definitionsMatthew Wilcox
The atomic_t type cannot currently be used in some header files because it would create an include loop with asm/atomic.h. Move the type definition to linux/types.h to break the loop. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06mm: show node to memory section relationship with symlinks in sysfsGary Hade
Show node to memory section relationship with symlinks in sysfs Add /sys/devices/system/node/nodeX/memoryY symlinks for all the memory sections located on nodeX. For example: /sys/devices/system/node/node1/memory135 -> ../../memory/memory135 indicates that memory section 135 resides on node1. Also revises documentation to cover this change as well as updating Documentation/ABI/testing/sysfs-devices-memory to include descriptions of memory hotremove files 'phys_device', 'phys_index', and 'state' that were previously not described there. In addition to it always being a good policy to provide users with the maximum possible amount of physical location information for resources that can be hot-added and/or hot-removed, the following are some (but likely not all) of the user benefits provided by this change. Immediate: - Provides information needed to determine the specific node on which a defective DIMM is located. This will reduce system downtime when the node or defective DIMM is swapped out. - Prevents unintended onlining of a memory section that was previously offlined due to a defective DIMM. This could happen during node hot-add when the user or node hot-add assist script onlines _all_ offlined sections due to user or script inability to identify the specific memory sections located on the hot-added node. The consequences of reintroducing the defective memory could be ugly. - Provides information needed to vary the amount and distribution of memory on specific nodes for testing or debugging purposes. Future: - Will provide information needed to identify the memory sections that need to be offlined prior to physical removal of a specific node. Symlink creation during boot was tested on 2-node x86_64, 2-node ppc64, and 2-node ia64 systems. Symlink creation during physical memory hot-add tested on a 2-node x86_64 system. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03Merge branch 'master' of ↵Mike Travis
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2008-12-31take init_fs to saner placeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-30Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-12-28Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits) [S390] provide documentation for hvc_iucv kernel parameter. [S390] convert ctcm printks to dev_xxx and pr_xxx macros. [S390] convert zfcp printks to pr_xxx macros. [S390] convert vmlogrdr printks to pr_xxx macros. [S390] convert zfcp dumper printks to pr_xxx macros. [S390] convert cpu related printks to pr_xxx macros. [S390] convert qeth printks to dev_xxx and pr_xxx macros. [S390] convert sclp printks to pr_xxx macros. [S390] convert iucv printks to dev_xxx and pr_xxx macros. [S390] convert ap_bus printks to pr_xxx macros. [S390] convert dcssblk and extmem printks messages to pr_xxx macros. [S390] convert monwriter printks to pr_xxx macros. [S390] convert s390 debug feature printks to pr_xxx macros. [S390] convert monreader printks to pr_xxx macros. [S390] convert appldata printks to pr_xxx macros. [S390] convert setup printks to pr_xxx macros. [S390] convert hypfs printks to pr_xxx macros. [S390] convert time printks to pr_xxx macros. [S390] convert cpacf printks to pr_xxx macros. [S390] convert cio printks to pr_xxx macros. ...
2008-12-26cpumask: sh: Introduce cpumask_of_{node,pcibus} to replace ↵Rusty Russell
{node,pcibus}_to_cpumask Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mundt <lethal@linux-sh.org>
2008-12-25[S390] arch_setup_additional_pages argumentsMartin Schwidefsky
arch_setup_additional_pages currently gets two arguments, the binary format descripton and an indication if the process uses an executable stack or not. The second argument is not used by anybody, it could be removed without replacement. What actually does make sense is to pass an indication if the process uses the elf interpreter or not. The glibc code will not use anything from the vdso if the process does not use the dynamic linker, so for statically linked binaries the architecture backend can choose not to map the vdso. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-22sh: oprofile: Fix up the module build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add UIO support for JPU on SH7722.Takanari Hayama
Add JPU support on Migo-R via UIO. This make use of Magnus's generic UIO platform driver. Chunk of contiguous memory to hold intermediate image and compressed data during encode and decode. Signed-off-by: Takanari Hayama <taki@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-rsk: Use uImage generation by default for rsk7201/7203.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Fix up pata_platform build breakage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: enable deferred io LCDC on Migo-RMagnus Damm
Enable LCDC deferred io on Migo-R using 1s delay. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add LCDC interrupt configuration to AP325 and Migo-RMagnus Damm
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: split coherent pagesMagnus Damm
Split pages returned by dma_alloc_coherent() and make sure we free them one by one. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: dma: Kill off ISA DMA wrapper.Paul Mundt
There are no more users for this code, and it has been deprecated for some time, so just kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.Paul Mundt
We don't really want this enabled by default, but it is still quite useful for debugging. So, make it conditional and leave it off by default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the unused SH_ALPHANUMERIC debug option.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable skipping of bss on debug platforms for sh32 also.Paul Mundt
This enables the same functionality that sh64 has for sh32. When running on simulated hardware or via remote memory via the debug interface, memory is gauranteed to be zero on boot already, and skipping the zeroing of BSS has measurable boot time benefits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22doc: Update sh cpufreq documentation.Paul Mundt
The sh cpufreq driver is no longer limited to just the SH-3 and SH-4, update the documentation to reflect this fact accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mrshpc_setup_windows() needs to be inline.Paul Mundt
While no one should be including this file multiple times, flag it inline anyways just in case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off cf-enabler with extreme prejudice.Paul Mundt
Now that the rest of the boards that were using cf-enabler "generically" have switched to setting up their mappings on their own, only the mach-se boards were left using it. All of the cf-enabler using mach-se boards use a special initialization of the MRSHPC windows rather than going through the special PTE as other SH-4 platforms do. This consolidates the MRSHPC setup logic, hooks it up on the boards that care, and gets rid of any and all remaining references to cf-enabler. This has been long overdue, as cf-enabler has been the bane of arch/sh/kernel for the last 7 years. Good riddance. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a simple edosk7705_defconfig for build testing.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-edosk7705: Fix up edosk7705 so it all builds again.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-microdev: Split out the fdc37c93xapm initialization code.Paul Mundt
This makes the microdev code a bit more readable, and moves the setup for the SuperIO out on its own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().Paul Mundt
This also fixes up a long-standing bug for this platform where the PIO base was set to a register offset, rather than the actual PIO offset itself. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.Paul Mundt
This gets rid of the cf enabler use on mach-sh03 and switches to use pata_platform with the proper address directly. cf_enabler is subsequently disabled for mach-sh03. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: board-shmin: Convert shmin to use __set_io_port_base().Paul Mundt
Drop the special mv_ioport_map() implementation, as this can simply use __set_io_port_base() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off dead mv_init_pci() from machvec.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Simplify kernel_thread_helper() for sh32.Paul Mundt
This can use the same implementation as sh64, the generated assembly is the same between the new and old version, so there is not much point in leaving it open coded in inline assembly. This is preparatory work for future consolidation of the _32/_64 variants. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off mv_heartbeat() from the machvec.Paul Mundt
Nothing is using this any more, so get rid of it before anyone gets the bright idea to start using it again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the cayman and microdev special heartbeat code.Paul Mundt
These can use the generic code instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off sh_bios_in_gdb_mode().Paul Mundt
With the reworked kgdb support, we always detach and reinitialize the stub. This was mostly a feature for handoffs between sh-ipl+g and the kgdb stub, but virtually no sh-ipl+g versions ever had this working right in the first place. Given that the sh-ipl+g stubs in general use today don't even support the GDB stub, and we have already killed off the special casing in the sh-sci serial driver, kill off this now unused symbol too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: export sh_bios_get_node_addr() symbol for stnic module.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Run sh_bios through a long overdue Lindent.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Convert op_model_sh7750 to new common interface.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Backtrace support.Dave Peverley
This patch improves the oprofile support on sh and adds backtrace support. Signed-off-by: Dave Peverley <dpeverley@mpc-data.co.uk> Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Refactor common setup code for multiple driver support.Paul Mundt
This re-implements the old op_model_null code in to something more generic, where multiple drivers, backtrace, etc. can all be interfaced. Based largely on arch/mips/oprofile/common.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH machinesMatt Fleming
After the recent changes to switch SuperH board support over to irq_chip it is now possible to set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Cayman boards from hw_interrupt_type to irq_chipMatt Fleming
I've been unable to even compile-test this change because I don't have an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have now been converted to use irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Dreamcast support from hw_interrupt_type to irq_chipMatt Fleming
Switch the dreamcast IRQ code over to the irq_chip way of doing things, so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Also, whilst I'm here change some things to make checkpatch.pl happy: - Indent with tabs, not with spaces - Include <linux/io.h>, not <asm/io.h> - Fix the multi-line comment style - Fix some typos in the comments Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert SystemH board support from hw_interrupt_type to irq_chipMatt Fleming
... as part of the hw_interrupt_type to irq_chip crusade. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Microdev boards from hw_interrupt_type to irq_chipMatt Fleming
This is part of the SH move to irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide sdivsi3/udivsi3/udivdi3 for sh64, kill off libgcc linking.Paul Mundt
This moves in the necessary libgcc bits and kills off the libgcc linking for sh64 kernels as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add SH-5 optimized memcpy()/memset()/strcpy()/strlen().Paul Mundt
Adopted from the uClibc optimized string versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off remaining CONFIG_SH_KGDB bits.Paul Mundt
Now that we use the generic stub, kill off all of the left over references. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Generic kgdb stub support.Paul Mundt
This migrates from the old bitrotted kgdb stub implementation and moves to the generic stub. In the process support for SH-2/SH-2A is also added, which the old stub never provided. Signed-off-by: Paul Mundt <lethal@linux-sh.org>