aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2007-06-08sh: Fixup machvec support.Paul Mundt
This fixes up much of the machvec handling, allowing for it to be overloaded on boot. Making practical use of this still requires some Kconfig munging, however. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: __user annotations for __get/__put_user().Paul Mundt
This adds in some more __user annotations. These weren't being handled properly in some of the __get_user and __put_user paths, so tidy those up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Split out CPU topology initialization.Paul Mundt
Split out the CPU topology initialization to a separate file, and switch it to a percpu type, rather than an NR_CPUS array. At the same time, switch to only registering present CPUs, rather than using the possible CPU map. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix se73180 platform device registration.Paul Mundt
Copy and paste error from se7343, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: ioremap() through PMB needs asm/mmu.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: voyagergx: Fix build warnings.Paul Mundt
pr_debug() was using a %x on an unsigned long, which was making the build a bit noisy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix SH4-202 clock fwk set_rate() mismatch.Paul Mundt
With the SH7722 changes, ->set_rate() also takes an algo_id, SH4-202 was overlooked when this change went in. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: microdev: Fix compile warnings.Paul Mundt
irq.c needs linux/interrupt.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix in_nmi symbol build error.Paul Mundt
If CONFIG_KGDB_NMI is disabled, we're left with a stray in_nmi reference that can't be resolved. Move the symbol under the ifdef, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: support older gcc'sAndrew Morton
Make my version of gcc happy. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: trivial build cleanups.Evgeniy Polyakov
Several errors were spotted during building for custom config (SMP included). Although SMP still does not compile (no ipi and __smp_call_function) and does not work, this looks a bit cleaner. Some other errors obtained via gcc-4.1.0 build. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Fix vsyscall build failure.Manuel Lauss
CC arch/sh/kernel/vsyscall/vsyscall.o a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_setup_additional_pages': a/arch/sh/kernel/vsyscall/vsyscall.c:63: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:67: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:82: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:85: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_vma_name': a/arch/sh/kernel/vsyscall/vsyscall.c:91: error: dereferencing pointer to incomplete type Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Trivial fix for dma-api compile failure.Manuel Lauss
Trivial fix for arch/sh/drivers/dma/dma-api.c compile failure: CC arch/sh/drivers/dma/dma-api.o a/arch/sh/drivers/dma/dma-api.c: In function 'dma_wait_for_completion': a/arch/sh/drivers/dma/dma-api.c:233: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) a/arch/sh/drivers/dma/dma-api.c:233: error: (Each undeclared identifier is reported only once a/arch/sh/drivers/dma/dma-api.c:233: error: for each function it appears in.) a/arch/sh/drivers/dma/dma-api.c:233: warning: implicit declaration of function 'schedule' Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Fix pcrel too far for in_nmi label.Takashi YOSHII
Add lost in_nmi definition to solve pcrel too far. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-23sh: section mismatch fixes for system timer.Paul Mundt
Fix up a couple of section mismatch warnings regarding sys_timer. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-22Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix dreamcast build for IRQ changes. sh: Fix clock multiplier on SH7722. sh: Wire up kdump crash kernel exec in die(). sh: sr.bl toggling around idle sleep. sh: disable genrtc support. fs: Kill sh dependency for binfmt_flat. sh: Disable psw support for R7785RP. sh: Fix page size alignment in __copy_user_page(). sh: Fix up various compile warnings for SE boards. sh: Wire up signalfd/timerfd/eventfd syscalls. sh: revert addition of page fault notifiers spelling fixes: arch/sh/ input: hp680_ts compile fixes. sh: landisk: Header cleanups. sh: landisk: rtc-rs5c313 support. sh: Kill off pmb slab cache destructor. sh: Fix up psw build rules for r7780rp. sh: Shut up compiler warnings in __do_page_fault().
2007-05-21sh: Fix clock multiplier on SH7722.dmitry pervushin
This fixes up the master clock multiplier and initial rate propagation for the SH7722 clocks. Signed-off-by: dmitry pervushin <dimka@nomadgs.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Wire up kdump crash kernel exec in die().Paul Mundt
Now that we have the basic kdump support in place, add it in to die() so we can enter the crash kernel automatically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: sr.bl toggling around idle sleep.Paul Mundt
As pointed out by Saito-san, without the sr.bl manipulation we can occasionally hit delays in the idle loop due to interrupt handling, so ensure that interrupts are blocked before going to sleep. At the same time, we throw in TIF_POLLING_NRFLAG for the !hlt_counter case (primarily used by the ST-40 parts). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Disable psw support for R7785RP.Paul Mundt
While R7780RP and R7780MP support this, R7785RP does not. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix page size alignment in __copy_user_page().Paul Mundt
SH-3 comes up with the PAGE_SIZE on a misaligned boundary: arch/sh/mm/copy_page.S: Assembler messages: arch/sh/mm/copy_page.S:132: Warning: misaligned data fix it up with explicit alignment. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix up various compile warnings for SE boards.Paul Mundt
- setup-sh7750.c only defines the sh7751_ipr_map when building with SH7751 support. - 7722 Solution Engine was missing a mach-type entry, causing the macro in cf-enabler to be undefined. - arch/sh/mm/init.c needs linux/pagemap.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Wire up signalfd/timerfd/eventfd syscalls.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: revert addition of page fault notifiersChristoph Hellwig
Just at the time you added them on sh we're removing them from other architectures. As there's no user yet this patch just removes them completely. Once you actually have a kprobes patch it should follow the direct call to kprobes_fault_handler model that powerpc, s390 and sparc64 employ in 2.6.22-rc1 and that I'm updating other architectures to. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21spelling fixes: arch/sh/Simon Arlott
Spelling fixes in arch/sh/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-19all-archs: consolidate .data section definition in asm-genericSam Ravnborg
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19all-archs: consolidate .text section definition in asm-genericSam Ravnborg
Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-14sh: landisk: rtc-rs5c313 support.kogiidena
Add the rs5c313 platform device to the landisk setup code. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Kill off pmb slab cache destructor.Paul Mundt
This is the last remaining slab destructor in the kernel, which we kill off and move the resultant list tracking logic up to the pmb_alloc()/pmb_free() paths. As Christoph Lameter pointed out, it's potentially unsafe to be taking the list lock in the destructor anyways, so this is also more fundamentally correct. With this in place, we're all set for killing off slab destructors from the kernel entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Fix up psw build rules for r7780rp.Paul Mundt
When reordering the Makefile rules, the psw support was being clobbered. Fix it up so it's linked in again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Shut up compiler warnings in __do_page_fault().Paul Mundt
GCC doesn't seem to be able to figure this one out for itself, so just shut it up.. CC arch/sh/mm/fault.o arch/sh/mm/fault.c: In function '__do_page_fault': arch/sh/mm/fault.c:288: warning: 'ptl' may be used uninitialized in this function Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix stacktrace simplification fallout. sh: SH7760 DMABRG support. sh: clockevent/clocksource/hrtimers/nohz TMU support. sh: Truncate MAX_ACTIVE_REGIONS for the common case. rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq(). sh: Convert to common die chain. sh: Wire up utimensat syscall. sh: landisk mv_nr_irqs definition. sh: Fixup ndelay() xloops calculation for alternate HZ. sh: Add 32-bit opcode feature CPU flag. sh: Fix PC adjustments for varying opcode length. sh: Support for SH-2A 32-bit opcodes. sh: Kill off redundant __div64_32 symbol export. sh: Share exception vector table for SH-3/4. sh: Always define TRAPA_BUG_OPCODE. sh: __GFP_REPEAT for pte allocations, too. rtc: rtc-sh: Fix up dev_dbg() warnings. sh: generic quicklist support.
2007-05-09sh: Fix stacktrace simplification fallout.Paul Mundt
When the stacktrace simplification changes went in the function definition on SH got skipped, fix it up so things build again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: SH7760 DMABRG support.Manuel Lauss
The DMABRG is a special DMA unit within the SH7760 which does data transfers from main memory to Audio units and USB shared memory. It has 3 IRQ lines which generate 10 events, which have to be masked unmasked and acked in a single 32bit register. It works independently from the tradition SH DMAC, but blocks usage of DMAC channel 0. This patch adds 2 functions to associate callbacks with DMABRG events and initialization. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: clockevent/clocksource/hrtimers/nohz TMU support.Paul Mundt
This adds basic support for clockevents and clocksources, presently only implemented for TMU-based systems (which are the majority of SH-3 and SH-4 systems). The old NO_IDLE_HZ implementation is also dropped completely, the only users of this were on TMU-based systems anyways. More work needs to be done to generalize the TMU handling, in that the current implementation is rather tied to the notion of TMU0 and TMU1 utilization. Additionally, as more SH timers switch over to this scheme, we'll be able to gut most of the remaining system timer infrastructure that existed before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09fix file specification in commentsUwe Kleine-König
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09sh: Truncate MAX_ACTIVE_REGIONS for the common case.Paul Mundt
Most SH platforms aren't going to need more than a single active region, ones that need more can pad this out as necessary. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Convert to common die chain.Paul Mundt
This went in immediately after SH added the die chain notifiers, so move over to that instead.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Wire up utimensat syscall.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: landisk mv_nr_irqs definition.kogiidena
Fix up the landisk build. When NR_IRQS was removed, landisk got missed in the updates. Update the machvec for the landisk IRQs to get it working again. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Fixup ndelay() xloops calculation for alternate HZ.kogiidena
Currently the xloops calculation in ndelay() gets set to 0 when calculated with HZ=250, fix up how we do the HZ factoring in order to get this right for differing values. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Add 32-bit opcode feature CPU flag.Paul Mundt
Add a CPU flag for the CPUs that support 32-bit opcodes, which gets passed down to userspace. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Fix PC adjustments for varying opcode length.Paul Mundt
There are a few different cases for figuring out how to size the instruction. We read in the instruction located at regs->pc - 4 when rewinding the opcode to figure out if there's a 32-bit opcode before the faulting instruction, with a default of a - 2 adjustment on a mismatch. In practice this works for the cases where pc - 4 is just another 16-bit opcode, or we happen to have a 32-bit and a 16-bit immediately preceeding the pc value. In the cases where we aren't rewinding, this is much less ugly.. We also don't bother fixing up the places where we're explicitly dealing with 16-bit instructions, since this might lead to confusion regarding the encoding size possibilities on other CPU variants. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Support for SH-2A 32-bit opcodes.Paul Mundt
SH-2A supports both 16 and 32-bit instructions, add a simple helper for figuring out the instruction size in the places where there are hardcoded 16-bit assumptions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Kill off redundant __div64_32 symbol export.Paul Mundt
modpost noticed that __div64_32 was being exported twice: WARNING: lib/built-in: '__div64_32' exported twice. Previous export was in arch/sh/kernel/built-in.ko kill off the duplicate. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Share exception vector table for SH-3/4.Paul Mundt
The only difference between these at the moment are the FPU exceptions, and these are hidden away under CONFIG_SH_FPU (which is only set for the SH-4 case anyways..). This consolidates the two tables, and updates SH-4 to use the updated copy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: generic quicklist support.Paul Mundt
This moves SH over to the generic quicklists. As per x86_64, we have special mappings for the PGDs, so these go on their own list.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-08Add IRQF_IRQPOLL flag on shBernhard Walle
Add IRQF_IRQPOLL on each timer interrupt on SH2. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fixes and cleanups for earlyprintk aka boot consoleGerd Hoffmann
The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>