aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc64
AgeCommit message (Collapse)Author
2007-10-17[SPARC/64]: Consolidate of_register_driverStephen Rothwell
Also of_unregister_driver. These will be shortly also used by the PowerPC code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[SPARC64]: Check of_get_property() return in pci_determine_mem_io_space().David S. Miller
If the PCI controller lacks the 'ranges' property nothing is going to work. Noticed by Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[SPARC64]: Fix boot failures due to bootmem.David S. Miller
Do not use *alloc_bootmem_low*(), because ARCH_LOW_ADDRESS_LIMIT is 4GB and this results in boot failures if all of the physical memory in the machine is above 4GB. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[SPARC64]: Implement atomic backoff.David S. Miller
When the cpu count is high and contention hits an atomic object, the processors can synchronize such that some cpus continually get knocked out and cannot complete the atomic update. So implement an exponential backoff when SMP. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17remove include/asm-*/ipc.hAdrian Bunk
All asm/ipc.h files do only #include <asm-generic/ipc.h>. This patch therefore removes all include/asm-*/ipc.h files and moves the contents of include/asm-generic/ipc.h to include/linux/ipc.h. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17core_pattern: ignore RLIMIT_CORE if core_pattern is a pipeNeil Horman
For some time /proc/sys/kernel/core_pattern has been able to set its output destination as a pipe, allowing a user space helper to receive and intellegently process a core. This infrastructure however has some shortcommings which can be enhanced. Specifically: 1) The coredump code in the kernel should ignore RLIMIT_CORE limitation when core_pattern is a pipe, since file system resources are not being consumed in this case, unless the user application wishes to save the core, at which point the app is restricted by usual file system limits and restrictions. 2) The core_pattern code should be able to parse and pass options to the user space helper as an argv array. The real core limit of the uid of the crashing proces should also be passable to the user space helper (since it is overridden to zero when called). 3) Some miscellaneous bugs need to be cleaned up (specifically the recognition of a recursive core dump, should the user mode helper itself crash. Also, the core dump code in the kernel should not wait for the user mode helper to exit, since the same context is responsible for writing to the pipe, and a read of the pipe by the user mode helper will result in a deadlock. This patch: Remove the check of RLIMIT_CORE if core_pattern is a pipe. In the event that core_pattern is a pipe, the entire core will be fed to the user mode helper. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <martin.pitt@ubuntu.com> Cc: <wwoods@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17KCONFIG: Make "Instrumentation support" non-EXPERIMENTALRobert P. J. Day
It makes more sense to make instrumentation support experimental on a case-by-case basis. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Use list_head in binfmt handlingAlexey Dobriyan
Switch single-linked binfmt formats list to usual list_head's. This leads to one-liners in register_binfmt() and unregister_binfmt(). The downside is one pointer more in struct linux_binfmt. This is not a problem, since the set of registered binfmts on typical box is very small -- (ELF + something distro enabled for you). Test-booted, played with executable .txt files, modprobe/rmmod binfmt_misc. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Fix loop terminating conditions in fill_sg().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17SPARC64: fix iommu sg chainingFUJITA Tomonori
Commit 2c941a204070ab32d92d40318a3196a7fb994c00 looks incomplete. The helper functions like prepare_sg() need to support sg chaining too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: introduce ccflags-y, asflags-y and ldflags-y kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP kbuild: enable use of AFLAGS and CFLAGS on commandline kbuild: enable 'make AFLAGS=...' to add additional options to AS kbuild: fix AFLAGS use in h8300 and m68knommu kbuild: check for wrong use of CFLAGS kbuild: enable 'make CFLAGS=...' to add additional options to CC kbuild: fix up CFLAGS usage kbuild: make modpost detect unterminated device id lists kbuild: call export_report from the Makefile kbuild: move Kai Germaschewski to CREDITS kconfig/menuconfig: distinguish between selected-by-another options and comments kconfig: tristate choices with mixed tristate and boolean values include/linux/Kbuild: remove duplicate entries kbuild: kill backward compatibility checks kbuild: kill EXTRA_ARFLAGS kbuild: fix documentation in makefiles.txt kbuild: call make once for all targets when O=.. is used kbuild: pass -g to assembler under CONFIG_DEBUG_INFO kbuild: update _shipped files for kconfig syntax cleanup ... Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
2007-10-16kprobes: support kretprobe blacklistMasami Hiramatsu
Introduce architecture dependent kretprobe blacklists to prohibit users from inserting return probes on the function in which kprobes can be inserted but kretprobes can not. This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and registers "__switch_to" to the blacklist on x86-64, because that mark is to prohibit user from inserting only kretprobe. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fix memory hot remove not configured case.KAMEZAWA Hiroyuki
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess. This patch cleans up them. This is against 2.6.23-rc6-mm1. - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case. - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(), which returns -EINVAL. - removed remove_pages() only used in powerpc. - removed no-op remove_memory() in i386, sh, sparc64, x86_64. - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it to return -EINVAL. Note: Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other archs if there are requirements and testers. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16During VM oom condition, kill all threads in process groupWill Schmidt
We have had complaints where a threaded application is left in a bad state after one of it's threads is killed when we hit a VM: out_of_memory condition. Killing just one of the process threads can leave the application in a bad state, whereas killing the entire process group would allow for the application to restart, or be otherwise handled, and makes it very obvious that something has gone wrong. This change allows the entire process group to be taken down, rather than just the one thread. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16SPARC64: SPARSEMEM_VMEMMAP supportDavid Miller
[apw@shadowen.org: style fixups] [apw@shadowen.org: vmemmap sparc64: convert to new config options] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16SPARC64: sg chaining supportJens Axboe
This updates the sparc64 iommu/pci dma mappers to sg chaining. Acked-by: David S. Miller <davem@davemloft.net> Later updated to newer kernel with unified sparc64 iommu sg handling. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-15kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-13[SPARC64]: virt_to_real_irq_table --> virt_irq_tableDavid S. Miller
It no longer translates to "real irqs" (aka. INO buckets) so reflect that by using a simpler name for it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: virt_irq --> bucket mapping no longer necessaryDavid S. Miller
We used to need this to compute virt_irq --> ino, but that is no longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill ugly __bucket() macro.David S. Miller
All the users go through virt_irq_to_bucket() and essentially want to go from a virt_irq to an INO, but we have a way to do that already via virt_to_real_irq_table[].dev_ino. This also allows us to kill both virt_to_real_irq() and virt_irq_to_bucket(). Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill ugly __irq_ino() macro.David S. Miller
We have a place to stick INO information in the virt_to_real_irq_table[], which is currently only used for VIRQs. And that is readily accessible from the one __irq_ino() call site. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Only use bypass accesses to INO buckets.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Update defconfig.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Use sun4v VIRQ interfaces as intended.David S. Miller
We were simply concatenating the devhandle and devino and using that as the cookie, which defeats the entire purpose of the VIRQ hypervisor interfaces. Now that we use physical addresses for the INO buckets, we can allocate them dynamically for VIRQs and encode the cookies as ~__pa(bucket). This allows us to test for and decode the cookie with a simple: brlz $reg1, 1f xnor $reg1, %g0, $reg2 sequence. This works because bit 64 is never set in traditional INO vectors, and it is also never set in a physical address. So xnor'ing the physical address of the bucket always gives us a negative number, and thus a unique condition we can test cheaply. Inspired by ideas from Greg Onufer. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Allocate ivector_table dynamically.David S. Miller
Shrinks kernel by 16K compared to before the IVEC physical address changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Access ivector_table[] using physical addresses.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Make IVEC pointers 64-bit.David S. Miller
Currently we chain IVEC entries using 32-bit "pointers" because we know that the ivector_table is in the main kernel image, thus below 4GB. This uses proper 64-bit pointers instead. Whilst this bloats up the kernel image size, this sets the infrastructure necessary to significantly shrink the kernel size by using physical addresses and dynamically allocating the ivector table. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Fix register usage in xor_raid_4().David S. Miller
Some typos led to using %i6/%i7 instead of %l6/%l7 in loads which is really really bad because those are the frame pointer and return PC. Based upon a raid5 crash report by Bertrand Joel. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill pci_memspace_mask.David S. Miller
It is totally unnecessary as the needed information is properly encoded in the resources. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Consolidate MSI support code.David S. Miller
This also makes us use the MSI queues correctly. Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt handler. This handler runs the MSI queue and dispatches the virtual interrupts indicated by arriving MSIs in that MSI queue. All of the common logic is placed in pci_msi.c, with callbacks to handle the PCI controller specific aspects of the operations. This common infrastructure will make it much easier to add MSG support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC/64]: Move of_platform_driver initialisations: arch/sparc{,64}.Stephen Rothwell
We no longer initialise the name field of the of_platform_driver, but use the name field of the embedded device_driver's name field instead. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Fix bugs in SYSV IPC handling in 64-bit processes.David S. Miller
Thanks to Tom Callaway for the excellent bug report and test case. sys_ipc() has several problems, most to due with semaphore call handling: 1) 'err' return should be a 'long' 2) "union semun" is passed in a register on 64-bit compared to 32-bit which provides it on the stack and therefore by reference 3) Second and third arguments to SEMCTL are swapped compared to 32-bit. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC/64]: Prepare to remove of_platform_driver name.Stephen Rothwell
The name field of of_platform_driver is just copied into the included device_driver. By not overriding an already initialised device_driver name, we can convert the drivers over time to stop using the of_platform_driver name. Also we were not copying the owner field from of_platform_driver, so do the same with it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: beautify vmlinux.ldsSam Ravnborg
Apply a consistent format to vmlinux.lds. The file is now to some degree readable. In addition move several labels inside the braces such that they reflect the actual start address of a section. Without this the label would not reflect if ld added alignment. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Enable MSI on sun4u Fire PCI-E controllers.David S. Miller
The support code is identical to the hypervisor sun4v stuff, just replacing the hypervisor calls with register reads and writes in the Fire controller. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04[CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger
into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[SPARC64]: Fix 'niu' complex IRQ probing.David S. Miller
They should be computed the same as how we compute them under 'virtual-devices'. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04[SPARC64]: check fork_idle() errorAkinobu Mita
Check the return value of fork_idle() to catch error. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03[SPARC64]: Temporary workaround for PCI-E slot on T1000.David S. Miller
The PCI-E slot on T1000 connects directly to the Fire PCI chip with no intervening bridges visible in the OBP tree. Unfortunately the bus numbering of the device in that slot is different (2) from the PCI host controller (0), and thus the pci_bus_{read,write}_config_*() calls don't work out. Complicating things further the Fire PCI controller has no config space it responds to either. For now treat this case specially so that devices in the slot work. Longer term we need to perhaps cons up a dummy bridge between the Fire and the PCI-E slot so that the bus hierarchy is complete inside of the kernel and thus the bus numbering all works out right. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03[SPARC64]: VIO device addition log message level is too high.David S. Miller
There is no reason this should be KERN_ERR, KERN_INFO is just fine. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03[SPARC64]: Fix domain-services port probing.David S. Miller
We should only use ports underneath "domain-services", other DS ports in the MDESC aren't for us to use. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-02[SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.David S. Miller
It doesn't matter for use in 64-bit objects, but when used in 32-bit environments the top 32-bits of the local and in registers will get chopped off on the next register window spill/restore which leads to difficult to track down and subtle bugs. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-02[SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy.David S. Miller
For the case where the source is not aligned modulo 8 we don't use load-twins to suck the data in and this kills performance since normal loads allocate in the L1 cache (unlike load-twin) and thus big memcpys swipe the entire L1 D-cache. We need to allocate a register window to implement this properly, but that actually simplifies a lot of things as a nice side-effect. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-30[SPARC64]: Fix put_user() calls in binfmt_aout32.cDavid S. Miller
argv and envp are pointers to u32's in userspace, so don't try to put_user() a NULL to them. Aparently gcc-4.2.x now warns about this, and since we use -Werror for arch/sparc64 code, this breaks the build. Signed-off-by: David S. Miller <davem@davemloft.net>