aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/acpi
AgeCommit message (Collapse)Author
2009-11-24[CPUFREQ] Enable ACPI PDC handshake for VIA/Centaur CPUsHarald Welte
In commit 0de51088e6a82bc8413d3ca9e28bbca2788b5b53, we introduced the use of acpi-cpufreq on VIA/Centaur CPU's by removing a vendor check for VENDOR_INTEL. However, as it turns out, at least the Nano CPU's also need the PDC (processor driver capabilities) handshake in order to activate the methods required for acpi-cpufreq. Since arch_acpi_processor_init_pdc() contains another vendor check for Intel, the PDC is not initialized on VIA CPU's. The resulting behavior of a current mainline kernel on such systems is: acpi-cpufreq loads and it indicates CPU frequency changes. However, the CPU stays at a single frequency This trivial patch ensures that init_intel_pdc() is called on Intel and VIA/Centaur CPU's alike. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-10-16x86: Document linker script ASSERT() quirkIngo Molnar
Older binutils breaks if ASSERT() is used without a sink for the output. For example 2.14.90.0.6 is known to be broken, the link fails with: LD .tmp_vmlinux1 ld:arch/x86/kernel/vmlinux.lds:678: parse error Document this quirk in all three files that use it. See: http://marc.info/?l=linux-kbuild&m=124930110427870&w=2 See[2]: d2ba8b2 ("x86: Fix assert syntax in vmlinux.lds.S") Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Roland McGrath <roland@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4AD6523D.5030909@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15Revert "x86: linker script syntax nits"Ingo Molnar
This reverts commit e9a63a4e559fbdc522072281d05e6b13c1022f4b. This breaks older binutils, where sink-less asserts are broken. See this commit for further details: d2ba8b2: x86: Fix assert syntax in vmlinux.lds.S Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4AD6523D.5030909@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14x86: linker script syntax nitsRoland McGrath
The linker scripts grew some use of weirdly wrong linker script syntax. It happens to work, but it's not what the syntax is documented to be. Clean it up to use the official syntax. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
2009-09-27ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regressionZhao Yakui
Don't disable ARB_DISABLE when the familary ID is 0x0F. http://bugzilla.kernel.org/show_bug.cgi?id=14211 This was a 2.6.31 regression, and so this patch needs to be applied to 2.6.31.stable Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29Merge branch 'for-ingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 into x86/apic Merge reason: the SFI (Simple Firmware Interface) feature in the ACPI tree needs this cleanup, pull it into the APIC branch as well so that there's no interactions. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=nFeng Tang
Some IO-APIC routines are ACPI specific now, but need to be exposed when CONFIG_ACPI=n for the benefit of SFI. Remove #ifdef ACPI around these routines: io_apic_get_unique_id(int ioapic, int apic_id); io_apic_get_version(int ioapic); io_apic_get_redir_entries(int ioapic); Move these routines from ACPI-specific boot.c to io_apic.c: uniq_ioapic_id(u8 id) mp_find_ioapic() mp_find_ioapic_pin() mp_register_ioapic() Also, since uniq_ioapic_id() is now no longer static, re-name it to io_apic_unique_id() for consistency with the other public io_apic routines. For simplicity, do not #ifdef the resulting code ACPI || SFI, thought that could be done in the future if it is important to optimize the !ACPI !SFI IO-APIC x86 kernel for size. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org
2009-07-14x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant bracesJeremy Fitzhardinge
We don't put braces around a single statement. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-20ACPI: pdc init related memory leak with physical CPU hotplugPallipadi, Venkatesh
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated for _PDC objects that is never freed and will cause memory leak in case of physical CPU remove and add. Patch fixes the memory leak by freeing the objects soon after _PDC is evaluated. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18gcov: enable GCOV_PROFILE_ALL for x86_64Peter Oberparleiter
Enable gcov profiling of the entire kernel on x86_64. Required changes include disabling profiling for: * arch/kernel/acpi/realmode and arch/kernel/boot/compressed: not linked to main kernel * arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet: profiling causes segfaults during boot (incompatible context) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12ACPI, PCI, x86: move MCFG parsing routine from ACPI to PCI fileLen Brown
Move arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg() to arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg() where it is used, and make it static. Move associated globals and helper routine with it. No functional change. This code move is in preparation for SFI support, which will allow the PCI code to find the MCFG table on systems which do not support ACPI. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-12ACPI: Remove Asus P4B266 from blacklistOlivier Berger
See http://marc.info/?l=linux-acpi&m=124068823904429&w=2 for discussion Signed-off-by: Olivier Berger <oberger@ouvaton.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-12ACPI: delete dead acpi_disabled setting codeLen Brown
Testing CONFIG_ACPI inside boot.c is a waste of text, since boot.c is built only when CONFIG_ACPI=y Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-12PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.cJaswinder Singh Rajput
One of the numbers in arch/x86/kernel/acpi/sleep.c is long, but it is not annotated appropriately, so sparese warns about it. Fix that. [rjw: added the changelog.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-10Merge branch 'x86-setup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, setup: fix comment in the "glove box" code x86, setup: "glove box" BIOS interrupts in the video code x86, setup: "glove box" BIOS interrupts in the MCA code x86, setup: "glove box" BIOS interrupts in the EDD code x86, setup: "glove box" BIOS interrupts in the APM code x86, setup: "glove box" BIOS interrupts in the core boot code x86, setup: "glove box" BIOS calls -- infrastructure
2009-06-02x86: Print real IOAPIC version for x86-64Naga Chumbalkar
Fix the fact that the IOAPIC version number in the x86_64 code path always gets assigned to 0, instead of the correct value. Before the patch: (from "dmesg" output): ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 <--- After the patch: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 <--- History: io_apic_get_version() was compiled out of the x86_64 code path in the commit f2c2cca3acef8b253a36381d9b469ad4fb08563a: Author: Andi Kleen <ak@suse.de> Date: Tue Sep 26 10:52:37 2006 +0200 [PATCH] Remove APIC version/cpu capability mpparse checking/printing ACPI went to great trouble to get the APIC version and CPU capabilities of different CPUs before passing them to the mpparser. But all that data was used was to print it out. Actually it even faked some data based on the boot cpu, not on the actual CPU being booted. Remove all this code because it's not needed. Cc: len.brown@intel.com At the time, the IOAPIC version number was deliberately not printed in the x86_64 code path. However, after the x86 and x86_64 files were merged, the net result is that the IOAPIC version is printed incorrectly in the x86_64 code path. The patch below provides a fix. I have tested it with acpi, and with acpi=off, and did not see any problems. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <20090416014230.4885.94926.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> *************************
2009-05-27ACPI: Disable ARB_DISABLE on platforms where it is not neededPallipadi, Venkatesh
ARB_DISABLE is a NOP on all of the recent Intel platforms. For such platforms, reduce contention on c3_lock by skipping the fake ARB_DISABLE. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-18x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabledYinghai Lu
Len expressed concern that the update_mptable feature has side-effects on the ACPI code. Make it sure explicitly that the code only ever gets called if the (default disabled) update_mptable boot quirk option is disabled. [ Impact: isolate the update_mptable feature from ACPI code more ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A0DC832.5090200@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86, apic: introduce io_apic_irq_attrYinghai Lu
according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: move pin_programmed bit map to io_apic.cYinghai Lu
Prepare to call setup_io_apic_routing() in pcibios_irq_enable() also remove not needed member apic_id. [ Impact: clean up, prepare for future change ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C3DD.3050104@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()Yinghai Lu
The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration code never got mainline because there were open discussions about it. This call is needed to properly update the kernel's copy of the mptable, when the update_mptable boot parameter is needed. Now that the dust has settled with the APIC unification, and since there were no objections when the patch was re-submitted, try this again. [ Impact: fix the update_mptable boot parameter ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C387.7090103@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: remove irq-compression trick on 32-bitYinghai Lu
We already have a per cpu vector on 32-bit via recent changes, and don't need this trick any more (which trick obfuscates the real GSI mappings and which only triggers on larger systems to begin with): On 3 ioapic system (24 per ioapic) before patch I got: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 after the patch we get: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 As it can be seen that GSIs now get mapped lineary. [ Impact: simplify irq number mapping on bigger 32-bit systems ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C35C.7060207@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq: change ACPI GSI APIs to also take a device argumentYinghai Lu
We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09x86, setup: "glove box" BIOS calls -- infrastructureH. Peter Anvin
Impact: new interfaces (not yet used) For all the platforms out there, there is an infinite number of buggy BIOSes. This adds infrastructure to treat BIOS interrupts more like toxic waste and "glove box" them -- we switch out the register set, perform the BIOS interrupt, and then restore the previous state. LKML-Reference: <49DE7F79.4030106@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rjw@sisk.pl>
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'misc' into releaseLen Brown
2009-04-03x86, ACPI: add support for x2apic ACPI extensionsSuresh Siddha
All logical processors with APIC ID values of 255 and greater will have their APIC reported through Processor X2APIC structure (type-9 entry type) and all logical processors with APIC ID less than 255 will have their APIC reported through legacy Processor Local APIC (type-0 entry type) only. This is the same case even for NMI structure reporting. The Processor X2APIC Affinity structure provides the association between the X2APIC ID of a logical processor and the proximity domain to which the logical processor belongs. For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device() objects in the ACPI namespace. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03ACPI: update commentZhang Rui
update ACPI Development Discussion List Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-24Merge branches 'x86/acpi', 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/mm', ↵Ingo Molnar
'x86/signal' and 'x86/urgent'; commit 'v2.6.29-rc6' into x86/core
2009-02-22Merge branch 'linus' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-default/setup.c Semantic conflict resolution: arch/x86/kernel/setup.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-21x86_64: Fix S3 fail pathJiri Slaby
As acpi_enter_sleep_state can fail, take this into account in do_suspend_lowlevel and don't return to the do_suspend_lowlevel's caller. This would break (currently) fpu status and preempt count. Technically, this means use `call' instead of `jmp' and `jmp' to the `resume_point' after the `call' (i.e. if acpi_enter_sleep_state returns=fails). `resume_point' will handle the restore of fpu and preempt count gracefully. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21x86_64: acpi/wakeup_64 cleanupJiri Slaby
- remove %ds re-set, it's already set in wakeup_long64 - remove double labels and alignment (ENTRY already adds both) - use meaningful resume point labelname - skip alignment while jumping from wakeup_long64 to the resume point - remove .size, .type and unused labels [v2] - added ENDPROCs Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-20Merge branches 'x86/asm', 'x86/cleanups' and 'x86/headers' into x86/coreIngo Molnar
2009-02-17x86, apic: remove duplicate asm/apic.h inclusionsIngo Molnar
Impact: cleanup Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: remove genapic.hIngo Molnar
Impact: cleanup Remove genapic.h and remove all references to it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13x86: use _types.h headers in asm where availableJeremy Fitzhardinge
In general, the only definitions that assembly files can use are in _types.S headers (where available), so convert them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13Merge branches 'x86/acpi', 'x86/asm', 'x86/cpudetect', 'x86/crashdump', ↵Ingo Molnar
'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/header-fixes', 'x86/headers' and 'x86/minor-fixes' into x86/core
2009-02-13Merge branch 'linus' into x86/apicIngo Molnar
Conflicts: arch/x86/kernel/acpi/boot.c arch/x86/mm/fault.c
2009-02-11Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ptrace, x86: fix the usage of ptrace_fork() i8327: fix outb() parameter order x86: fix math_emu register frame access x86: math_emu info cleanup x86: include correct %gs in a.out core dump x86, vmi: put a missing paravirt_release_pmd in pgd_dtor x86: find nr_irqs_gsi with mp_ioapic_routing x86: add clflush before monitor for Intel 7400 series x86: disable intel_iommu support by default x86: don't apply __supported_pte_mask to non-present ptes x86: fix grammar in user-visible BIOS warning x86/Kconfig.cpu: make Kconfig help readable in the console x86, 64-bit: print DMI info in the oops trace
2009-02-09x86: add mp_find_ioapic_pinJeremy Fitzhardinge
Add mp_find_ioapic_pin() to find an IO APIC's specific pin from a GSI, and use this function within acpi/boot. Make it non-static so other code can use it too. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-09x86: unstatic mp_find_ioapic so it can be used elsewhereJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-09acpi/x86: introduce __apci_map_table, v4Yinghai Lu
to prevent wrongly overwriting fixmap that still want to use. ACPI used to rely on low mappings being all linearly mapped and grew a habit: it never really unmapped certain kinds of tables after use. This can cause problems - for example the hypothetical case when some spurious access still references it. v2: remove prev_map and prev_size in __apci_map_table v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to early_acpi_os_unmap_memory v4: fix typo in one acpi_get_table_with_size calling Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09acpi: remove final __acpi_map_table mapping before setting ↵Jeremy Fitzhardinge
acpi_gbl_permanent_mmap On x86, __acpi_map_table uses early_ioremap() to create the mapping, replacing the previous mapping with a new one. Once enough of the kernel is up an running it switches to using normal ioremap(). At that point, we need to clean up the final mapping to avoid a warning from the early_ioremap subsystem. This can be removed after all the instances in the ACPI code are fixed that rely on early-ioremap's implicit overmapping of previously mapped tables. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: always explicitly map acpi memoryJeremy Fitzhardinge
Always map acpi tables, rather than assuming we can use the normal linear mapping to access the acpi tables. This is necessary in a virtual environment where the linear mappings are to pseudo-physical memory, but the acpi tables exist at a real physical address. It doesn't hurt to map in the normal non-virtual case, so just do it unconditionally. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: use early_ioremap in __acpi_map_tableJeremy Fitzhardinge
__acpi_map_table() effectively reimplements early_ioremap(). Rather than have that duplication, just implement it in terms of early_ioremap(). However, unlike early_ioremap(), __acpi_map_table() just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: don't treat bigsmp as non-standardYinghai Lu
just like 64 bit switch from flat logical APIC messages to flat physical mode automatically. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: rename X86_GENERICARCH to X86_32_NON_STANDARDIngo Molnar
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures that are not included in the default build. Rename it to X86_32_NON_STANDARD. Signed-off-by: Ingo Molnar <mingo@elte.hu>