aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/aperture_64.c
AgeCommit message (Collapse)Author
2008-07-08x86: remove end_pfn in 64bitYinghai Lu
and use max_pfn directly. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/mpparse' into x86/develIngo Molnar
Conflicts: arch/x86/Kconfig arch/x86/kernel/io_apic_32.c arch/x86/kernel/setup_64.c arch/x86/mm/init_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: rename two e820 related functionsYinghai Lu
rename update_memory_range to e820_update_range rename add_memory_region to e820_add_region to make it more clear that they are about e820 map operations. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23x86: change early_gart_iommu_check() back to any_mappedYinghai Lu
Kevin Winchester reported a GART related direct rendering failure against linux-next-20080611, which shows up via these log entries: PCI: Using ACPI for IRQ routing PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: Aperture conflicts with PCI mapping. agpgart: Aperture from AGP @ e0000000 size 128 MB agpgart: Aperture conflicts with PCI mapping. agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. instead of the expected: PCI: Using ACPI for IRQ routing agpgart: Detected AGP bridge 0 agpgart: Aperture from AGP @ e0000000 size 128 MB Kevin bisected it down to this change in tip/x86/gart: "x86: checking aperture size order". agp check is using request_mem_region(), and could fail if e820 is reserved... change it back to e820_any_mapped(). Reported-and-bisected-by: "Kevin Winchester" <kjwinchester@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12x86, gart: add resume handlingRafael J. Wysocki
If GART IOMMU is used on an AMD64 system, the northbridge registers related to it should be restored during resume so that memory is not corrupted. Make gart_resume() handle that as appropriate. Ref. http://lkml.org/lkml/2008/5/25/96 and the following thread. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05x86: aperture_64.c: corner case wrongPavel Machek
If fix == 0, aper_enabled == 1, gart_fix_e820 == 0 if (!fix && !aper_enabled) return; if (gart_fix_e820 && !fix && aper_enabled) { if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); } return; } /* different nodes have different setting, disable them all atfirst*/ we'll fall back here and disable all the settings, even when they were all consistent. What about this? (I hope it compiles...) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05aperture_64.c: duplicated code, buggy?Pavel Machek
Hi! void __init early_gart_iommu_check(void) contains for (num = 24; num < 32; num++) { if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) continue; loop, with very similar loop duplicated in void __init gart_iommu_hole_init(void) . First copy of a loop seems to be buggy, too. It uses 0 as a "nothing set" value, which may actually bite us in last_aper_enabled case (because it may be often zero). (Beware, it is hard to test this patch, because this code has about 2^8 different code paths, depending on hardware and cmdline settings). Plus, the second loop does not check for consistency of aper_enabled. Should it? Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27x86: aperture_64.c: cleanupsPavel Machek
Some small cleanups for aperture_64.c; they should not really change any code. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22x86, aperture_64: use symbolic constantsPavel Machek
Factor-out common aperture_valid code. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12x86: clean up aperture_64.cYinghai Lu
1. use symbolic register names where appropriate. 2. num to bus or slot changing 3. handle for new opteron for bus other than 0 Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-12x86_64: allocate gart aperture from 512MYinghai Lu
because we try to reserve dma32 early, so we have chance to get aperture from 64M. with some sequence aperture allocated from RAM, could become E820_RESERVED. and then if doing a kexec with a big kernel that uncompressed size is above 64M we could have a range conflict with still using gart. So allocate gart aperture from 512M instead. Also change the fallback_aper_order to 5, because we don't have chance to get 2G or 4G aperture. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12x86: checking aperture size orderYinghai Lu
some systems are using 32M for gart and agp when memory is less than 4G. Kernel will reject and try to allcate another 64M that is not needed, and we will waste 64M of perfectly good RAM. this patch adds a workaround by checking aper_base/order between NB and agp bridge. If they are the same, and memory size is less than 4G, it will allow it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12x86: agp_gart size checking for buggy deviceYinghai Lu
while looking at Rafael J. Wysocki's system boot log, I found a funny printout: Node 0: aperture @ de000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:04:00 Aperture from AGP @ de000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 ... agpgart: Detected AGP bridge 20 agpgart: Aperture pointing to RAM agpgart: Aperture from AGP @ de000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. it means BIOS allocated the correct gart on the NB and AGP bridge, but because a bug in the silicon (the agp bridge reports the wrong order, it wants 4G instead) the kernel will reject that allocation. Also, because the size is only 32MB, and we try to get another 64M for gart, late fix_northbridge can not revert that change because it still reads the wrong size from agp bridge. So try to double check the order value from the agp bridge, before calling aperture_valid(). [ mingo@elte.hu: 32-bit fix. ] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86: clean up aperture_64.cPavel Machek
Initializing to zero is generally bad idea, I hope it is right for __init data, too. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-21x86: fix long standing bug with usb after hibernation with 4GB ramPavel Machek
aperture_64.c takes a piece of memory and makes it into iommu window... but such window may not be saved by swsusp -- that leads to oops during hibernation. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change aper valid checking sequenceYinghai Lu
old sequence: size ==> >4G ==> point to RAM changed to: >4G ==> point to RAM ==> size some bios even leave aper to unclear, so check size at last. To avoid reporting: Node 0: Aperture @ 4a42000000 size 32 MB Aperture too small (32 MB) with this change we will get: Node 0: Aperture @ 4a42000000 size 32 MB Aperture beyond 4G. Ignoring. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: checking aperture report for node insteadYinghai Lu
currently when gart iommu is enabled by BIOS or previous we got " Checking aperture... CPU 0: aperture @4000000 size 64MB CPU 1: aperture @4000000 size 64MB " we should use use Node instead. we will get " Checking aperture... Node 0: aperture @4000000 size 64MB Node 1: aperture @4000000 size 64MB " Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: disable the GART early, 64-bitYinghai Lu
For K8 system: 4G RAM with memory hole remapping enabled, or more than 4G RAM installed. when try to use kexec second kernel, and the first doesn't include gart_shutdown. the second kernel could have different aper position than the first kernel. and second kernel could use that hole as RAM that is still used by GART set by the first kernel. esp. when try to kexec 2.6.24 with sparse mem enable from previous kernel (from RHEL 5 or SLES 10). the new kernel will use aper by GART (set by first kernel) for vmemmap. and after new kernel setting one new GART. the position will be real RAM. the _mapcount set is lost. Bad page state in process 'swapper' page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0 Trying to fix it up, but a reboot is needed Backtrace: Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13 Call Trace: [<ffffffff8026401f>] bad_page+0x63/0x8d [<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5 [<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198 [<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76 [<ffffffff80ba3461>] mem_init+0x3b/0x152 [<ffffffff80b959d3>] start_kernel+0x236/0x2c2 [<ffffffff80b9511a>] _sinittext+0x11a/0x121 and [ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0 phys addr is : 0x1c200000 RHEL 5.1 kernel -53 said: PCI-DMA: aperture base @ 1c000000 size 65536 KB new kernel said: Mapping aperture over 65536 KB of RAM @ 3c000000 So could try to disable that GART if possible. According to Ingo > hm, i'm wondering, instead of modifying the GART, why dont we simply > _detect_ whatever GART settings we have inherited, and propagate that > into our e820 maps? I.e. if there's inconsistency, then punch that out > from the memory maps and just dont use that memory. > > that way it would not matter whether the GART settings came from a [old > or crashing] Linux kernel that has not called gart_iommu_shutdown(), or > whether it's a BIOS that has set up an aperture hole inconsistent with > the memory map it passed. (or the memory map we _think_ i tried to pass > us) > > it would also be more robust to only read and do a memory map quirk > based on that, than actively trying to change the GART so early in the > bootup. Later on we have to re-enable the GART _anyway_ and have to > punch a hole for it. > > and as a bonus, we would have shored up our defenses against crappy > BIOSes as well. add e820 modification for gart inconsistent setting. gart_fix_e820=off could be used to disable e820 fix. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/kernel/aperture_64.c printk()sIngo Molnar
clean up arch/x86/kernel/aperture_64.c printk()s. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/kernel/aperture_64.cIngo Molnar
whitespace cleanup. No code changed: text data bss dec hex filename 2080 76 4 2160 870 aperture_64.o.before 2080 76 4 2160 870 aperture_64.o.after errors lines of code errors/KLOC arch/x86/kernel/aperture_64.c 114 299 381.2 arch/x86/kernel/aperture_64.c 0 315 0 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: rename symbols only used for the GART implementationJoerg Roedel
This patch renames the 4 symbols iommu_hole_init(), iommu_aperture, iommu_aperture_allowed, iommu_aperture_disabled. All these symbols are only used for the GART implementation of IOMMUs. It adds and additional gart_ prefix to them. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: rename iommu.h to gart.hJoerg Roedel
This patch renames the include file asm-x86/iommu.h to asm-x86/gart.h to make clear to which IOMMU implementation it belongs. The patch also adds "GART" to the Kconfig line. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11x86_64: move kernelThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>