aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic.c
AgeCommit message (Collapse)Author
2008-12-23x86: fix lguest used_vectors breakage, -v2Yinghai Lu
Impact: fix lguest, clean up 32-bit lguest used used_vectors to record vectors, but that model of allocating vectors changed and got broken, after we changed vector allocation to a per_cpu array. Try enable that for 64bit, and the array is used for all vectors that are not managed by vector_irq per_cpu array. Also kill system_vectors[], that is now a duplication of the used_vectors bitmap. [ merged in cpus4096 due to io_apic.c cpumask changes. ] [ -v2, fix build failure ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18x86: use possible_cpus=NUM to extend the possible cpus allowedMike Travis
Impact: add new boot parameter Use possible_cpus=NUM kernel parameter to extend the number of possible cpus. The ability to HOTPLUG ON cpus that are "possible" but not "present" is dealt with in a later patch. Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-18Merge branch 'x86/apic' into cpus4096Ingo Molnar
This done for conflict prevention: we merge it into the cpus4096 tree because upcoming cpumask changes will touch apic.c that would collide with x86/apic otherwise.
2008-12-16x86: Use cpumask accessors code for possible/present maps.Mike Travis
Impact: use new API Use the accessors rather than frobbing bits directly. Most of this is in arch code I haven't even compiled, but is straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-16x86: prepare for cpumask iterators to only go to nr_cpu_idsMike Travis
Impact: cleanup, futureproof In fact, all cpumask ops will only be valid (in general) for bit numbers < nr_cpu_ids. So use that instead of NR_CPUS in various places. This is always safe: no cpu number can be >= nr_cpu_ids, and nr_cpu_ids is initialized to NR_CPUS at boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-12-16x86 smp: modify send_IPI_mask interface to accept cpumask_t pointersMike Travis
Impact: cleanup, change parameter passing * Change genapic interfaces to accept cpumask_t pointers where possible. * Modify external callers to use cpumask_t pointers in function calls. * Create new send_IPI_mask_allbutself which is the same as the send_IPI_mask functions but removes smp_processor_id() from list. This removes another common need for a temporary cpumask_t variable. * Functions that used a temp cpumask_t variable for: cpumask_t allbutme = cpu_online_map; cpu_clear(smp_processor_id(), allbutme); if (!cpus_empty(allbutme)) ... become: if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu))) ... * Other minor code optimizations (like using cpus_clear instead of CPU_MASK_NONE, etc.) Applies to linux-2.6.tip/master. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-11-30enable_IR_x2apic() needs to be __initAl Viro
calls __init, called only from __init Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-11x86: apic reset counter on shutdownThomas Gleixner
Impact: avoid spurious lapic timer events on shutdown The apic timer might be close to firing when it is shutdown. We can not really disable the timer - we just mask the interrupt. That way we can get an extra interrupt when it is reenabled. Set the counter to max on shutdown to avoid this. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-10x86: apic - use pr_ macros for loggingCyrill Gorcunov
Impact: cleanup It saves us some source lines and shift the code a bit righter. And a multiline comment style is fixed too :-) Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-10x86: apic - calibrate_APIC_clock remove redundant irq-enable-disableCyrill Gorcunov
Impact: cleanup lapic_timer_setup is self-protected with local_irq_save/restore no need to use them in caller and levt is the per-cpu variable so no concurrent access from another cpu. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify APIC_DIVISORCyrill Gorcunov
Use APIC_DIVISOR being set to 16 for both 32/64bit mode. To escape APIC timer underflow during calibration set it to the maximum possible value. Also typo error (CONFG instead of proper CONFIG) fixed. The error was caught by Venkatesh Pallipadi, thanks a lot Venkatesh! See details on http://lkml.org/lkml/2008/10/9/425 Reported-by: Venkatesh Pallipad <venkatesh.pallipadi@intel.com> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: io-apic - interrupt remapping fixCyrill Gorcunov
Interrupt remapping could lead to NULL dereference in case of kzalloc failed and memory leak in other way. So fix the both cases. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - fix unused vars warning in calibrate_APIC_clockCyrill Gorcunov
If we don't have CONFIG_X86_PM_TIMER=y compiler warns about unused variables. Move PM timer based calibration into a separate function and make the code cleaner and the compiler happy as well. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - skip writting ESR register if we dont have onCyrill Gorcunov
On 82489DX we don't have ESR register so we should not write it. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - lapic_setup_esr does not handle esr_disable - fix itCyrill Gorcunov
lapic_setup_esr doesn't handle esr_disable inquire. The error brought in during unification process. Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: print out apic id in hex formatYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: lapic address print out like io apic addrYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: apic - unify smp_spurious/error_interrupt declarationCyrill Gorcunov
According to entry_64.S we do pass pt_regs pointer into interrupt handlers but don't use them. So we safely may merge the declarations. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: let 64 bit to use 32 bit calibrate_apic_clockYinghai Lu
Use the 32-bit APIC calibration code - it's more mature. Signed-of-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: rename apic_32.c and apic_64.c to apic.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 17:40:41 +0000