aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/mcheck
AgeCommit message (Collapse)Author
2009-10-16x86: Don't print number of MCE banks for every CPURoland Dreier
The MCE initialization code explicitly says it doesn't handle asymmetric configurations where different CPUs support different numbers of MCE banks, and it prints a big warning in that case. Therefore, printing the "mce: CPU supports <x> MCE banks" message into the kernel log for every CPU is pure redundancy that clutters the log significantly for systems with lots of CPUs. Signed-off-by: Roland Dreier <rolandd@cisco.com> LKML-Reference: <adaeip473qt.fsf@cisco.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-02x86: EDAC: MCE: Fix MCE decoding callback logicIngo Molnar
Make decoding of MCEs happen only on AMD hardware by registering a non-default callback only on CPU families which support it. While looking at the interaction of decode_mce() with the other MCE code i also noticed a few other things and made the following cleanups/fixes: - Fixed the mce_decode() weak alias - a weak alias is really not good here, it should be a proper callback. A weak alias will be overriden if a piece of code is built into the kernel - not good, obviously. - The patch initializes the callback on AMD family 10h and 11h. - Added the more correct fallback printk of: No support for human readable MCE decoding on this CPU type. Transcribe the message and run it through 'mcelog --ascii' to decode. On CPUs that dont have a decoder. - Made the surrounding code more readable. Note that the callback allows us to have a default fallback - without having to check the CPU versions during the printout itself. When an EDAC module registers itself, it can install the decode-print function. (there's no unregister needed as this is core code.) version -v2 by Borislav Petkov: - add K8 to the set of supported CPUs - always build in edac_mce_amd since we use an early_initcall now - fix checkpatch warnings Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <20091001141432.GA11410@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30Revert "x86, mce: do not compile mcelog message on AMD"Linus Torvalds
This reverts commit 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9, as requested by Andi Kleen: "Obviously kernels compiled with AMD support can still run on non AMD systems, so messages like this can never be removed at compile time." Requsted-by: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23x86: mce: Use safer ways to access MCE registersIngo Molnar
Use rdmsrl_safe() when accessing MCE registers. While in theory we always 'know' which ones are safe to access from the capability bits, there's a lot of hardware variations and reality might differ from theory, as it did in this case: http://bugzilla.kernel.org/show_bug.cgi?id=14204 [ 0.010016] mce: CPU supports 5 MCE banks [ 0.011029] general protection fault: 0000 [#1] [ 0.011998] last sysfs file: [ 0.011998] Modules linked in: [ 0.011998] [ 0.011998] Pid: 0, comm: swapper Not tainted (2.6.31_router #1) HP Vectra [ 0.011998] EIP: 0060:[<c100d9b9>] EFLAGS: 00010246 CPU: 0 [ 0.011998] EIP is at mce_rdmsrl+0x19/0x60 [ 0.011998] EAX: 00000000 EBX: 00000001 ECX: 00000407 EDX: 08000000 [ 0.011998] ESI: 00000000 EDI: 8c000000 EBP: 00000405 ESP: c17d5eac So WARN_ONCE() instead of crashing the box. ( also fix a number of stylistic inconsistencies in the code. ) Note, we might still crash in wrmsrl() if we get that far, but we shouldnt if the registers are truly inaccessible. Reported-by: GNUtoo <GNUtoo@no-log.org> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <bug-14204-5438@http.bugzilla.kernel.org/> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22x86: mce, inject: Use real inject-msg in raise_localHuang Ying
Current raise_local() uses a struct mce that comes from mce_write() as a parameter instead of the real inject-msg, so when we set mce.finished = 0 to clear injected MCE, the real inject stays valid. This will cause the remaining inject-msg affect the next injection, which is not desired. To fix this, real inject-msg is used in raise_local instead of the one on the stack. This patch is based on the diagnosis and the fixes by Dean Nelson. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <1253601357.15717.757.camel@yhuang-dev.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22x86: mce: Fix thermal throttling message stormIngo Molnar
If a system switches back and forth between hot and cold mode, the MCE code will print a stream of critical kernel messages. Extend the throttling code to properly notice this, by only printing the first hot + cold transition and omitting the rest up to CHECK_INTERVAL (5 minutes). This way we'll only get a single incident of: [ 102.356584] CPU0: Temperature above threshold, cpu clock throttled (total events = 1) [ 102.357000] Disabling lock debugging due to kernel taint [ 102.369223] CPU0: Temperature/speed normal Every 5 minutes. The 'total events' count tells the number of cold/hot transitions detected, should overheating occur after 5 minutes again: [ 402.357580] CPU0: Temperature above threshold, cpu clock throttled (total events = 24891) [ 402.358001] CPU0: Temperature/speed normal [ 450.704142] Machine check events logged Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22x86: mce: Clean up thermal throttling state tracking codeIngo Molnar
Instead of a mess of three separate percpu variables, consolidate the state into a single structure. Also clean up therm_throt_process(), use cleaner and more understandable variable names and a clearer logic. This, without changing the logic, makes the code more streamlined, more readable and smaller as well: text data bss dec hex filename 1487 169 4 1660 67c therm_throt.o.before 1432 176 4 1612 64c therm_throt.o.after Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19x86, mce: Fix compile warning in case of CONFIG_SMP=nAndreas Herrmann
Fix following compile warning: arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank': arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c' which shows up when kernel is compiled with CONFIG_SMP=n. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20090915151727.GB21670@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits) x86, mce: Fix compilation with !CONFIG_DEBUG_FS in mce-severity.c x86, mce: CE in last bank prevents panic by unknown MCE x86, mce: Fake panic support for MCE testing x86, mce: Move debugfs mce dir creating to mce.c x86, mce: Support specifying raise mode for software MCE injection x86, mce: Support specifying context for software mce injection x86, mce: fix reporting of Thermal Monitoring mechanism enabled x86, mce: remove never executed code x86, mce: add missing __cpuinit tags x86, mce: fix "mce" boot option handling for CONFIG_X86_NEW_MCE x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs x86: mce: Lower maximum number of banks to architecture limit x86: mce: macros to compute banks MSRs x86: mce: Move per bank data in a single datastructure x86: mce: Move code in mce.c x86: mce: Rename CONFIG_X86_NEW_MCE to CONFIG_X86_MCE x86: mce: Remove old i386 machine check code x86: mce: Update X86_MCE description in x86/Kconfig x86: mce: Make CONFIG_X86_ANCIENT_MCE dependent on CONFIG_X86_MCE x86, mce: use atomic_inc_return() instead of add by 1 ... Manually fixed up trivial conflicts: Documentation/feature-removal-schedule.txt arch/x86/kernel/cpu/mcheck/mce.c
2009-09-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits) powerpc64: convert to dynamic percpu allocator sparc64: use embedding percpu first chunk allocator percpu: kill lpage first chunk allocator x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA percpu: update embedding first chunk allocator to handle sparse units percpu: use group information to allocate vmap areas sparsely vmalloc: implement pcpu_get_vm_areas() vmalloc: separate out insert_vmalloc_vm() percpu: add chunk->base_addr percpu: add pcpu_unit_offsets[] percpu: introduce pcpu_alloc_info and pcpu_group_info percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward percpu: add @align to pcpu_fc_alloc_fn_t percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() percpu: drop @static_size from first chunk allocators percpu: generalize first chunk allocator selection percpu: build first chunk allocators selectively percpu: rename 4k first chunk allocator to page percpu: improve boot messages percpu: fix pcpu_reclaim() locking ... Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: x86, mce: do not compile mcelog message on AMD EDAC, AMD: decode FR MCEs EDAC, AMD: decode load store MCEs EDAC, AMD: decode bus unit MCEs EDAC, AMD: decode instruction cache MCEs EDAC, AMD: decode data cache MCEs EDAC, AMD: carve out decoding of MCi_STATUS ErrorCode EDAC, AMD: carve out MCi_STATUS decoding x86, mce: pass mce info to EDAC for decoding amd64_edac: cleanup amd64_decode_bus_error amd64_edac: remove memory and GART TLB error decoders amd64_edac: cleanup/complete NB MCE decoding amd64_edac: cleanup amd64_process_error_info EDAC: beef up ErrorCodeExt error signatures EDAC: move MCE error descriptions to EDAC core
2009-09-14x86, mce: Fix compilation with !CONFIG_DEBUG_FS in mce-severity.cAndi Kleen
Fix compilation error in arch/x86/kernel/cpu/mcheck/mce-severity.c when CONFIG_DEBUG_FS is disabled, introduced in commit 5be9ed251f58881dfc3dd6742a81ff9ad1a7bb04. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-14x86, mce: do not compile mcelog message on AMDBorislav Petkov
Now that decoding is done in-kernel, suppress mcelog message part. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14x86, mce: pass mce info to EDAC for decodingBorislav Petkov
Move NB decoder along with required defines to EDAC MCE core. Add registration routines for further decoding of the MCE info in the AMD64 EDAC module. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-03x86, mcheck: Use correct cpumask for shared bank4Andreas Herrmann
This fixes threshold_bank4 support on multi-node processors. The correct mask to use is llc_shared_map, representing an internal node on Magny-Cours. We need to create 2 sets of symlinks for sibling shared banks -- one set for each internal node, symlinks of each set should target the first core on same internal node. Currently only one set is created where all symlinks are targeting the first core of the entire socket. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26x86, mce: CE in last bank prevents panic by unknown MCEHidetoshi Seto
If MCE handler is called but none of mces_seen have machine check event which might signal the MCE (i.e. event higher than MCE_KEEP_SEVERITY), panic with "Machine check from unknown source" will be taken since the MCE is assumed to be signaled from external agent or so. Usually mces_seen never point MCE_KEEP_SEVERITY event such as CE. But it can happen because initial value of mces_seen is accidentally modified by mce_no_way_out() - in case if mce_no_way_out() run through all banks and the last bank has the CE, mces_seen points the CE and the "panic by unknown" will not be taken. This patch fixes this undesired behavior, and clarifies the logic. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com> LKML-Reference: <4A94E244.3020301@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Reported-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
2009-08-17x86, mce: Don't initialize MCEs on unknown CPUsIngo Molnar
An older test-box started hanging at the following point during bootup: [ 0.022996] Mount-cache hash table entries: 512 [ 0.024996] Initializing cgroup subsys debug [ 0.025996] Initializing cgroup subsys cpuacct [ 0.026995] Initializing cgroup subsys devices [ 0.027995] Initializing cgroup subsys freezer [ 0.028995] mce: CPU supports 5 MCE banks I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit machine check code on 32bit"), which utilizes the MCE code on 32-bit systems too. The problem is caused by this detail in my config: # CONFIG_CPU_SUP_INTEL is not set This disables the quirks in mce_cpu_quirks() but still enables MCE support - which then hangs due to the missing quirk workaround needed on this CPU: if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0) mce_banks[0].init = 0; The safe solution is to not initialize MCEs if we dont know on what CPU we are running (or if that CPU's support code got disabled in the config). Also be a bit more defensive on 32-bit systems: dont do a boot-time dump of pending MCEs not just on the specific system that we found a problem with (Pentium-M), but earlier ones as well. Now this problem is probably not common and disabling CPU support is rare - but still being more defensive in something we turned on for a wide range of CPUs is prudent. Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUsBartlomiej Zolnierkiewicz
On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog): MCE 0 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 0 BANK 1 MCG status: MCi status: Error overflow Uncorrected error Error enabled Processor context corrupt MCA: Data CACHE Level-1 UNKNOWN Error STATUS f200000000000195 MCGSTATUS 0 [ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error) and f200000000000115 (... READ Error). To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump content of STATUS MSR before it is cleared during initialization. ] Since the bogus MCE results in a kernel taint (which in turn disables lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs by default ("mce=bootlog" boot parameter can be be used to get the old behavior). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16x86, mce: therm_throt: Don't log redundant normalityHugh Dickins
0d01f31439c1e4d602bf9fdc924ab66f407f5e38 "x86, mce: therm_throt - change when we print messages" removed redundant announcements of "Temperature/speed normal". They're not worth logging and remove their accompanying "Machine check events logged" messages as well from the console. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dmitry Torokhov <dtor@mail.ru> LKML-Reference: <Pine.LNX.4.64.0908161544100.7929@sister.anvils> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-14Merge branch 'percpu-for-linus' into percpu-for-nextTejun Heo
Conflicts: arch/sparc/kernel/smp_64.c arch/x86/kernel/cpu/perf_counter.c arch/x86/kernel/setup_percpu.c drivers/cpufreq/cpufreq_ondemand.c mm/percpu.c Conflicts in core and arch percpu codes are mostly from commit ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all the first chunk allocators into mm/percpu.c, the changes are moved from arch code to mm/percpu.c. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-11x86, mce: therm_throt - change when we print messagesDmitry Torokhov
My Latitude d630 seems to be handling thermal events in SMI by lowering the max frequency of the CPU till it cools down but still leaks the "everything is normal" events. This spams the console and with high priority printks. Adjust therm_throt driver to only print messages about the fact that temperatire returned back to normal when leaving the throttling state. Also lower the severity of "back to normal" message from KERN_CRIT to KERN_INFO. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10x86, mce: Fake panic support for MCE testingHuang Ying
If "fake panic" mode is turned on, just log panic message instead of go real panic. This is used for testing only, so that the test suite can check for the correct panic message and do regression testing for MCE would go panic. This patch is based on x86-tip.git/mce. ChangeLog: v5: - Rebased on x86-tip.git/mce v4: - Move config file from sysfs to debugfs Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-10x86, mce: Move debugfs mce dir creating to mce.cHuang Ying
Because more debugfs files under mce dir will be create in mce.c. ChangeLog: v5: - Rebased on x86-tip.git/mce Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-10x86, mce: Support specifying raise mode for software MCE injectionHuang Ying
Raise mode include raising as exception or raising as poll, it is specified via the mce.inject_flags field. This can be used to specify raise mode of UCNA, which is UC error but raised not as exception. And this can be used to test the filter code of poll handler or exception handler too. For example, enforce a poll raise mode for a fatal MCE. ChangeLog: v2: - Re-base on latest x86-tip.git/mce3 Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-10x86, mce: Support specifying context for software mce injectionHuang Ying
The cpu context is specified via the new mce.inject_flags fields. This allows more realistic machine check testing in different situations. "RANDOM" context is implemented via NMI broadcasting to add randomization to testing. AK: Fix NMI broadcasting check. Fix 32-bit building. Some race fixes. Move to module. Various changes ChangeLog: v3: - Re-based on latest x86-tip.git/mce4 - Fix 32-bit building v2: - Re-base on latest x86-tip.git/mce3 Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-29x86, mce: fix reporting of Thermal Monitoring mechanism enabledBartlomiej Zolnierkiewicz
Early Pentium M models use different method for enabling TM2 (per paragraph 13.5.2.3 of the "Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide, Part 1"). Tested on the affected Pentium M variant (model == 13). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-29x86, mce: remove never executed codeBartlomiej Zolnierkiewicz
fseverities_coverage is never NULL in err_out code path. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-29x86, mce: add missing __cpuinit tagsBartlomiej Zolnierkiewicz
mce_cap_init() and mce_cpu_quirks() can be tagged with __cpuinit. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-29x86, mce: fix "mce" boot option handling for CONFIG_X86_NEW_MCEBartlomiej Zolnierkiewicz
"mce argument mce ignored. Please use /sys" message shouldn't be printed when using "mce" boot option. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-29x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUsBartlomiej Zolnierkiewicz
On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog): MCE 0 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 0 BANK 1 MCG status: MCi status: Error overflow Uncorrected error Error enabled Processor context corrupt MCA: Data CACHE Level-1 UNKNOWN Error STATUS f200000000000195 MCGSTATUS 0 [ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error) and f200000000000115 (... READ Error). To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump content of STATUS MSR before it is cleared during initialization. ] Since the bogus MCE results in a kernel taint (which in turn disables lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs by default ("mce=bootlog" boot parameter can be be used to get the old behavior). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-21x86, mce: Fix set_trigger() accessorJan Beulich
Fix the condition checking the result of strchr() (which previously could result in an oops), and make the function return the number of bytes actively used. [ Impact: fix oops ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <4A5F04B7020000780000AB59@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09x86: mce: macros to compute banks MSRsAndi Kleen
Instead of open coded calculations for bank MSRs hide the indexing of higher banks MCE register MSRs in new macros. No semantic changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09x86: mce: Move per bank data in a single datastructureAndi Kleen
This addresses one of the leftover review comments. Move the per bank data into a single structure. This avoids several separate variables and also separate allocation of sysfs objects. I didn't move the CMCI ownership information so far because that would have needed some non trivial changes in the algorithms. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09x86: mce: Move code in mce.cAndi Kleen
Now that the X86_OLD_MCE ifdefs are gone move some code that used to be outside the big ifdef to a more natural place near its user. No code change. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09x86: mce: Rename CONFIG_X86_NEW_MCE to CONFIG_X86_MCEAndi Kleen
Drop the CONFIG_X86_NEW_MCE symbol and change all references to it to check for CONFIG_X86_MCE directly. No code changes Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09x86: mce: Remove old i386 machine check codeAndi Kleen
As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE This patch only removes code. The ancient machine check code for very old systems that are not supported by CONFIG_X86_NEW_MCE is still kept. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-04Merge branch 'master' into for-nextTejun Heo
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix changes. As alpha in percpu tree uses 'weak' attribute instead of inline assembly, there's no need for __used attribute. Conflicts: arch/alpha/include/asm/percpu.h arch/mn10300/kernel/vmlinux.lds.S include/linux/percpu-defs.h
2009-06-25x86, mce: percpu mcheck_timer should be pinnedHidetoshi Seto
If CONFIG_NO_HZ + CONFIG_SMP, timer added via add_timer() might be migrated on other cpu. Use add_timer_on() instead. Avoids the following failure: Maciej Rutecki wrote: > > After normal boot I try: > > > > echo 1 > /sys/devices/system/machinecheck/machinecheck0/check_interval > > > > I found this in dmesg: > > > > [ 141.704025] ------------[ cut here ]------------ > > [ 141.704039] WARNING: at arch/x86/kernel/cpu/mcheck/mce.c:1102 > > mcheck_timer+0xf5/0x100() Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-24percpu: clean up percpu variable definitionsTejun Heo
Percpu variable definition is about to be updated such that all percpu symbols including the static ones must be unique. Update percpu variable definitions accordingly. * as,cfq: rename ioc_count uniquely * cpufreq: rename cpu_dbs_info uniquely * xen: move nesting_count out of xen_evtchn_do_upcall() and rename it * mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and rename it * ipv4,6: rename cookie_scratch uniquely * x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to pmc_irq_entry and nmi_entry to pmc_nmi_entry * perf_counter: rename disable_count to perf_disable_count * ftrace: rename test_event_disable to ftrace_test_event_disable * kmemleak: rename test_pointer to kmemleak_test_pointer * mce: rename next_interval to mce_next_interval [ Impact: percpu usage cleanups, no duplicate static percpu var names ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Dave Jones <davej@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm <linux-mm@kvack.org> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andi Kleen <andi@firstfloor.org>
2009-06-24percpu: cleanup percpu array definitionsTejun Heo
Currently, the following three different ways to define percpu arrays are in use. 1. DEFINE_PER_CPU(elem_type[array_len], array_name); 2. DEFINE_PER_CPU(elem_type, array_name[array_len]); 3. DEFINE_PER_CPU(elem_type, array_name)[array_len]; Unify to #1 which correctly separates the roles of the two parameters and thus allows more flexibility in the way percpu variables are defined. [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm@kvack.org Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net>
2009-06-20x86, mce: use atomic_inc_return() instead of add by 1Borislav Petkov
Use atomic_inc_return() instead of atomic_add_return() by 1. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-18x86, mce: fix error path in mce_create_device()Hidetoshi Seto
Don't skip removing mce_attrs in route from error2. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-17x86: use zalloc_cpumask_var for mce_dev_initializedYinghai Lu
We need a cleared cpu_mask to record if mce is initialized, especially when MAXSMP is used. used zalloc_... instead Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-17x86: fix duplicated sysfs attributeYinghai Lu
The sysfs attribute cmci_disabled was accidentall turned into a duplicate of ignore_ce, breaking all other attributes. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-17Merge branch 'x86/urgent' into x86/mce3Ingo Molnar
Conflicts: arch/x86/kernel/cpu/mcheck/mce_intel.c Merge reason: merge with an urgent-branch MCE fix. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17x86, mce: mce_intel.c needs <asm/apic.h>H. Peter Anvin
mce_intel.c uses apic_write() and lapic_get_maxlvt(), and so it needs <asm/apic.h>. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
2009-06-17x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC presentCyrill Gorcunov
If APIC was disabled (for some reason) and as result it's not even mapped we should not try to enable thermal interrupts at all. Reported-by: Simon Holm Thøgersen <odie@cs.aau.dk> Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <20090615182633.GA7606@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17x86: mce: Handle banks == 0 case in K7 quirkAndi Kleen
Vegard Nossum reported: > I get an MCE-related crash like this in latest linus tree: > > [ 0.115341] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [ 0.116396] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.120570] mce: CPU supports 0 MCE banks > [ 0.124870] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000010 > [ 0.128001] IP: [<ffffffff813b98ad>] mcheck_init+0x278/0x320 > [ 0.128001] PGD 0 > [ 0.128001] Thread overran stack, or stack corrupted > [ 0.128001] Oops: 0002 [#1] PREEMPT SMP > [ 0.128001] last sysfs file: > [ 0.128001] CPU 0 > [ 0.128001] Modules linked in: > [ 0.128001] Pid: 0, comm: swapper Not tainted 2.6.30 #426 > [ 0.128001] RIP: 0010:[<ffffffff813b98ad>] [<ffffffff813b98ad>] mcheck_init+0x278/0x320 > [ 0.128001] RSP: 0018:ffffffff81595e38 EFLAGS: 00000246 > [ 0.128001] RAX: 0000000000000010 RBX: ffffffff8158f900 RCX: 0000000000000000 > [ 0.128001] RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000000000010 > [ 0.128001] RBP: ffffffff81595e68 R08: 0000000000000001 R09: 0000000000000000 > [ 0.128001] R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000000 > [ 0.128001] R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000000 > [ 0.128001] FS: 0000000000000000(0000) GS:ffff880002288000(0000) knlGS:00000 > 00000000000 > [ 0.128001] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > [ 0.128001] CR2: 0000000000000010 CR3: 0000000001001000 CR4: 00000000000006b0 > [ 0.128001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 0.128001] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 > [ 0.128001] Process swapper (pid: 0, threadinfo ffffffff81594000, task ffffff > ff8152a4a0) > [ 0.128001] Stack: > [ 0.128001] 0000000081595e68 5aa50ed3b4ddbe6e ffffffff8158f900 ffffffff8158f > 914 > [ 0.128001] ffffffff8158f948 0000000000000000 ffffffff81595eb8 ffffffff813b8 > 69c > [ 0.128001] 5aa50ed3b4ddbe6e 00000001078bfbfd 0000062300000800 5aa50ed3b4ddb > e6e > [ 0.128001] Call Trace: > [ 0.128001] [<ffffffff813b869c>] identify_cpu+0x331/0x392 > [ 0.128001] [<ffffffff815a1445>] identify_boot_cpu+0x23/0x6e > [ 0.128001] [<ffffffff815a14ac>] check_bugs+0x1c/0x60 > [ 0.128001] [<ffffffff8159c075>] start_kernel+0x403/0x46e > [ 0.128001] [<ffffffff8159b2ac>] x86_64_start_reservations+0xac/0xd5 > [ 0.128001] [<ffffffff8159b3ea>] x86_64_start_kernel+0x115/0x14b > [ 0.128001] [<ffffffff8159b140>] ? early_idt_handler+0x0/0x71 This happens on QEMU which reports MCA capability, but no banks. Without this patch there is a buffer overrun and boot ops because the code would try to initialize the 0 element of a zero length kmalloc() buffer. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andi Kleen <ak@linux.intel.com> LKML-Reference: <20090615125200.GD31969@one.firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 08:57:42 +0000