aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/e820_32.c
AgeCommit message (Collapse)Author
2008-07-08x86: merge setup_memory_map with e820Yinghai Lu
... and kill e820_32/64.c and e820_32/64.h Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move e820_resource_resources to e820.cYinghai Lu
and make 32-bit resource registration more like 64 bit. also move probe_roms back to setup_32.c Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: e820 merge parsing of the mem=/memmap= boot parametersYinghai Lu
since we now have 32-bit support for e820_register_active_regions(), we can merge the parsing of the mem=/memmap= boot parameters. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-04x86: make 32-bit use e820_register_active_regions()Yinghai Lu
this way 32-bit is more similar to 64-bit, and smarter e820 and numa. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-03x86, 32-bit: change propagate_e820_map() back to find_max_pfn()Yinghai Lu
we don't need to call memory_present that early. numa and sparse will call memory_present later and might even fail, it will call memory_present for the full range. also for sparse it will call alloc_bootmem ... before we set up bootmem. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: move e820_mark_nosave_regions to e820.cYinghai Lu
and make e820_mark_nosave_regions to take limit_pfn to use max_low_pfn for 32bit and end_pfn for 64bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: make e820.c to have common functionsYinghai Lu
remove the duplicated copy of these functions. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: fix trimming e820 with MTRR holes. - fixYinghai Lu
v2: process hole then end_pfn fix update_memory_range with whole cover comparing Signed-off-by: Yinghai Lu <yinghai.lu@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: fix trimming e820 with MTRR holes.Yinghai Lu
converting MTRR layout from continous to discrete, some time could run out of MTRRs. So add gran_sizek to prevent that by dumpping small RAM piece less than gran_sizek. previous trimming only can handle highest_pfn from mtrr to end_pfn from e820. when have more than 4g RAM installed, there will be holes below 4g. so need to check ram below 4g is coverred well. need to be applied after [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v7 Signed-off-by: Yinghai Lu <yinghai.lu@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: move i386 memory setup code to e820_32.cAlexander van Heukelum
The x86_64 code has centralized the memory setup code in e820_64.c. This patch copies that approach to i386: - early_param("mem", ...) parsing is moved from setup_32.c to e820_32.c. - setup_memory_map() and finish_e820_parsing() are factored out from setup_arch(), and declarations are added to e820_32.h. - print_memory_map() is made static and removed from e820_32.h. - user_defined_memmap is marked as __initdata. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19x86: rename find_max_pfn() to propagate_e820_map()Ingo Molnar
this function doesnt just 'find' the max_pfn - it also has other side-effects such as registering sparse memory maps. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86: reserve end-of-conventional-memory to 1MB on 32-bitAlexander van Heukelum
This patch adds explicit detection of the EBDA and reservation of the rom and adapter address space 0xa0000-0x100000 to the i386 kernels. Before this patch, the EBDA size was hardcoded as 4Kb. Also, the reservation of the adapter range was done by modifying the e820 map which is now not necessary any longer, and that code is removed from copy_e820_map. The amount of conventional memory and the start of the EBDA are detected by reading the BIOS data area directly. Paravirtual environments do not provide this area, so we bail out early in that case. They will just have to set up a correct memory map to start with. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-21x86: trim mtrr don't close gap for resource allocation.Yinghai Lu
fix the bug reported here: http://bugzilla.kernel.org/show_bug.cgi?id=10232 use update_memory_range() instead of add_memory_range() directly to avoid closing the gap. ( the new code only affects and runs on systems where the MTRR workaround triggers. ) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: trim memory by updating e820Yinghai Lu
when MTRRs are not covering the whole e820 table, we need to trim the RAM and need to update e820. reuse some code on 64-bit as well. here need to add early_get_cap and use it in early_cpu_detect, and move mtrr_bp_init early. The code successfully trimmed the memory map on Justin's system: from: [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) to: [ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable) [ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved) According to Justin it makes quite a difference: | When I boot the box without any trimming it acts like a 286 or 386, | takes about 10 minutes to boot (using raptor disks). Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86 boot: use E820 memory map on EFI 32 platformHuang, Ying
Because the EFI memory map are converted to e820 memory map in bootloader, the EFI memory map handling code is removed to clean up. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: EFI runtime service support: remove duplicated code from efi_32.cHuang, Ying
This patch removes the duplicated code between efi_32.c and efi.c. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove extern declarations for code, data, bss resourcesBernhard Walle
This patch removes the extern struct resource declarations for data_resource, code_resource and bss_resource on x86 and declares that three structures as static as done on other architectures like IA64. On i386, these structures are moved to setup_32.c (from e820_32.c) because that's code that is not specific to e820 and also required on EFI systems. That makes the "extern" reference superfluous. On x86_64, data_resource, code_resource and bss_resource are passed to e820_reserve_resources() as arguments just as done on i386 and IA64. That also avoids the "extern" reference and it's possible to make it static. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-22kexec: add BSS to resource treeBernhard Walle
Add the BSS to the resource tree just as kernel text and kernel data are in the resource tree. The main reason behind this is to avoid crashkernel reservation in that area. While it's not strictly necessary to have the BSS in the resource tree (the actual collision detection is done in the reserve_bootmem() function before), the usage of the BSS resource should be presented to the user in /proc/iomem just as Kernel data and Kernel code. Note: The patch currently is only implemented for x86 and ia64 (because efi_initialize_iomem_resources() has the same signature on i386 and ia64). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: <linux-arch@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-20spelling fixes: arch/i386/Simon Arlott
Spelling fixes in arch/i386/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Use extended crashkernel command line on i386Bernhard Walle
This patch removes the crashkernel parsing from arch/i386/kernel/machine_kexec.c and calls the generic function, introduced in the last patch, in setup_bootmem_allocator(). This is necessary because the amount of System RAM must be known in this function now because of the new syntax. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11i386: move kernelThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>