aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/entry_64.S
AgeCommit message (Collapse)Author
2008-12-28Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits) sched, trace: update trace_sched_wakeup() tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3 Revert "x86: disable X86_PTRACE_BTS" ring-buffer: prevent false positive warning ring-buffer: fix dangling commit race ftrace: enable format arguments checking x86, bts: memory accounting x86, bts: add fork and exit handling ftrace: introduce tracing_reset_online_cpus() helper tracing: fix warnings in kernel/trace/trace_sched_switch.c tracing: fix warning in kernel/trace/trace.c tracing/ring-buffer: remove unused ring_buffer size trace: fix task state printout ftrace: add not to regex on filtering functions trace: better use of stack_trace_enabled for boot up code trace: add a way to enable or disable the stack tracer x86: entry_64 - introduce FTRACE_ frame macro v2 tracing/ftrace: add the printk-msg-only option tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp() x86, bts: correctly report invalid bts records ... Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits being already partly merged by the SH merge.
2008-12-17x86: entry_64 - introduce FTRACE_ frame macro v2Cyrill Gorcunov
Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03ftrace: function graph return for function entrySteven Rostedt
Impact: feature, let entry function decide to trace or not This patch lets the graph tracer entry function decide if the tracing should be done at the end as well. This requires all function graph entry functions return 1 if it should trace, or 0 if the return should not be traced. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03ftrace: have function graph use mcount caller addressSteven Rostedt
Impact: consistency change for function graph This patch makes function graph record the mcount caller address the same way the function tracer does. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02tracing/function-graph-tracer: support for x86-64Frederic Weisbecker
Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-28x86: ret_from_fork - get rid of jump backIngo Molnar
Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-28Merge branch 'x86/debug' into x86/irqIngo Molnar
We merge this branch because x86/debug touches code that we started cleaning up in x86/irq. The two branches started out independent, but as unexpected amount of activity went into x86/irq, they became dependent. Resolve that by this cross-merge.
2008-11-28x86: entry_64.S - trivial: space, comments fixupCyrill Gorcunov
Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-28x86: uv bau interrupt -- use proper interrupt numberCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27x86: entry_64.S - use ENTRY to define child_ripCyrill Gorcunov
child_rip is called not by its name but indirectly rather so make it global and aligned. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27x86: entry_64.S - use X86_EFLAGS_IF instead of hardcoded numbergorcunov@gmail.com
Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_ENDAlexander van Heukelum
Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86, debug: remove the confusing entry in call tracejia zhang
Impact: improve backtrace quality avoid the confusion in call trace because of the lack of padding at the tail of function. When do_exit gets called, the return address behind call instruction is pushed into stack. If something get wrong in do_exit, for x86_64, the entry "kernel_execve +0x00/0xXX" rather than "child_rip +0xYY/0xZZ" is in the call trace. That looks confusing, so add a u2d to make the return address still part of the original call site. (This also catches any instances of us returning from that function somehow.) Signed-off-by: jia zhang <jia.zhang2008@gmail.com> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: KPROBE_ENTRY should be paired wth KPROBE_ENDAlexander van Heukelum
Impact: move some code out of .kprobes.text KPROBE_ENTRY switches code generation to .kprobes.text, and KPROBE_END uses .popsection to get back to the previous section (.text, normally). Also replace ENDPROC by END, for consistency. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: include ENTRY/END in entry handlers in entry_64.SAlexander van Heukelum
Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: move dwarf2 related macro to dwarf2.hCyrill Gorcunov
Impact: cleanup Move recently introduced dwarf2 macros to dwarf2.h file. It allow us to not duplicate them in assembly files. Active usage of _cfi macros don't make assembly files more obvious to understand but we already have a lot of macros there which requires to search the definitions of them *anyway*. But at least it make every cfi usage one line shorter. Also some code alignment is done. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-22x86: split out some macro's and move common code to paranoid_exit, fixAlexander van Heukelum
Impact: fix bootup crash Even though it tested fine for me, there was still a bug in the first patch: I have overlooked a call to ptregscall_common. This patch fixes that, I think, but the code is never executed for me while running a debian install... (I tested this by putting an "1:jmp 1b" in there.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: entry_64.S: split out some macro's and move common code to paranoid_exitAlexander van Heukelum
Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: entry_64.S: factor out save_paranoid and paranoid_exitAlexander van Heukelum
Impact: cleanup, shrink kernel image size Also expand the paranoid_exit0 macro into nmi_exit inside the nmi stub in the case of enabled irq-tracing. This gives a few hundred bytes code size reduction. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.SAlexander van Heukelum
Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: entry_64.S: renameIngo Molnar
Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21x86: clean up after: move entry_64.S register saving out of the macros, fixIngo Molnar
Impact: build fix The break builds with older binutils (2.16.1): arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:282: Error: too many positional arguments arch/x86/kernel/entry_64.S:283: Error: too many positional arguments arch/x86/kernel/entry_64.S:284: Error: too many positional arguments arch/x86/kernel/entry_64.S:285: Error: too many positional arguments arch/x86/kernel/entry_64.S:286: Error: too many positional arguments arch/x86/kernel/entry_64.S:287: Error: too many positional arguments arch/x86/kernel/entry_64.S:288: Error: too many positional arguments arch/x86/kernel/entry_64.S:289: Error: too many positional arguments arch/x86/kernel/entry_64.S:290: Error: too many positional arguments Took some time to figure out the detail that GAS chokes on: it's negative offsets. Rearrange the calculations to make sure we never go negative. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20x86: clean up after: move entry_64.S register saving out of the macrosAlexander van Heukelum
This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20x86: move entry_64.S register saving out of the macrosAlexander van Heukelum
Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20Merge branch 'x86/cleanups' into x86/irqIngo Molnar
[ merged x86/cleanups into x86/irq to enable a wider IRQ entry code patch to be applied, which depends on a cleanup patch in x86/cleanups. ]
2008-11-17x86: entry_64.S: remove whitespace at end of linesAlexander van Heukelum
Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13x86: irq: fix apicinterrupts on 64 bitsAlexander van Heukelum
Impact: Fix interrupt via the apicinterrupt macro Checkin 939b787130bf22887a09d8fd2641a094dcef8c22 changed the "interrupt" macro, but the "interrupt" macro is also invoked indirectly from the "apicinterrupt" macro. The "apicinterrupt" macro probably should have its own collection of systematic stubs for the same reason the main IRQ code does; as is it is a huge amount of replicated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-12x86: fix up the new IRQ code for older versions of gasH. Peter Anvin
Older versions of gas don't implement the C-style != operator, they instead want the Pascal-style <> operator. Change != to <> so we don't break compilation with those old versions of gas. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11x86: 64 bits: shrink and align IRQ stubsH. Peter Anvin
Move the IRQ stub generation to assembly to simplify it and for consistency with 32 bits. Doing it in a C file with asm() statements doesn't help clarity, and it prevents some optimizations. Shrink the IRQ stubs down to just over four bytes per (we fit seven into a 32-byte chunk.) This shrinks the total icache consumption of the IRQ stubs down to an even kilobyte, if all of them are in active use. The downside is that we end up with a double jump, which could have a negative effect on some pipelines. The double jump is always inside the same cacheline on any modern chips. To get the most effect, cache-align the IRQ stubs. This makes the 64-bit code match changes already done to the 32-bit code, and should open up irqinit*.c for unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-06ftrace: add quick function trace stopSteven Rostedt
Impact: quick start and stop of function tracer This patch adds a way to disable the function tracer quickly without the need to run kstop_machine. It adds a new variable called function_trace_stop which will stop the calls to functions from mcount when set. This is just an on/off switch and does not handle recursion like preempt_disable(). It's main purpose is to help other tracers/debuggers start and stop tracing fuctions without the need to call kstop_machine. The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs that implement the testing of the function_trace_stop in the mcount arch dependent code. Otherwise, the test is done in the C code. x86 is the only arch at the moment that supports this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86: add two missing unwind annotationsJan Beulich
Impact: improve debuginfo Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: x86 mcount stubSteven Rostedt
x86 now sets up the mcount locations through the build and no longer needs to record the ip when the function is executed. This patch changes the initial mcount to simply return. There's no need to do any other work. If the ftrace start up test fails, the original mcount will be what everything will use, so having this as fast as possible is a good thing. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86, traps: introduce dotraplinkageAlexander van Heukelum
Mark the exception handlers with "dotraplinkage" to hide the calling convention differences between i386 and x86_64. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86_64: add TRACE_IRQS_OFF in paranoidentry macroAlexander van Heukelum
Add TRACE_IRQS_OFF just before entering the C code. All exceptions are taken via interrupt gates. If irq tracing is enabled, it should be notified as soon as possible. Interrupts are only (conditionally) re-enabled in C code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86_64: add TRACE_IRQS_OFF in error_entryAlexander van Heukelum
Add TRACE_IRQS_OFF just before entering the C code. All exceptions are taken via interrupt gates. If irq tracing is enabled, it should be notified as soon as possible. Interrupts are only (conditionally) re-enabled in C code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: set bp field in pt_regs properlyGlauber Costa
Save rbp twice: One is for marking the stack frame, as usual (already there), and the other, to fill pt_regs properly. This is because bx comes right before the last saved register in that structure, and not bp. If the base pointer were in the place bx is today, this would not be needed. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86, 64-bit, dwarf2: push pushes 8 bytes and popf pops 8Alexander van Heukelum
The CFI_ADJUST_CFA_OFFSET dwarf2 annotation of a push/popf pair in ret_from_fork wrongly used a value of 4. It should have been 8. Fix that. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Andi Kleen <andi@firstfloor.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-23x86_64 ia32 syscall audit fast-pathRoland McGrath
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23x86_64 syscall audit fast-pathRoland McGrath
This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23x86_64: remove bogus optimization in sysret_signalRoland McGrath
This short-circuit path in sysret_signal looks wrong to me. AFAICT, in practice the branch is never taken--and if it were, it would go wrong. To wit, try loading a module whose init function does set_thread_flag(TIF_IRET), and see insmod crash (presumably with a wrong user stack pointer). This is because the FIXUP_TOP_OF_STACK work hasn't been done yet when we jump around the call to ptregscall_common and get to int_with_check--where it expects the user RSP,SS,CS and EFLAGS to have been stored by FIXUP_TOP_OF_STACK. I don't think it's normally possible to get to sysret_signal with no _TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are already superfluous. If it ever did happen, it is harmless to call do_notify_resume with nothing for it to do. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-21Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
2008-07-16x86 ptrace: unify syscall tracingRoland McGrath
This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-16x86_64: adjust exception frame on paranoid exceptionsJeremy Fitzhardinge
Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-16xen64: implement failsafe callbackJeremy Fitzhardinge
Implement the failsafe callback, so that iret and segment register load exceptions are reported to the kernel. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16xen64: add hypervisor callbacks for events, etcJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14Merge branch 'auto-ftrace-next' into tracing/for-linusIngo Molnar
Conflicts: arch/x86/kernel/entry_32.S arch/x86/kernel/process_32.c arch/x86/kernel/process_64.c arch/x86/lib/Makefile include/asm-x86/irqflags.h kernel/Makefile kernel/sched.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86_64: fix delayed signalsRoland McGrath
On three of the several paths in entry_64.S that call do_notify_resume() on the way back to user mode, we fail to properly check again for newly-arrived work that requires another call to do_notify_resume() before going to user mode. These paths set the mask to check only _TIF_NEED_RESCHED, but this is wrong. The other paths that lead to do_notify_resume() do this correctly already, and entry_32.S does it correctly in all cases. All paths back to user mode have to check all the _TIF_WORK_MASK flags at the last possible stage, with interrupts disabled. Otherwise, we miss any flags (TIF_SIGPENDING for example) that were set any time after we entered do_notify_resume(). More work flags can be set (or left set) synchronously inside do_notify_resume(), as TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs (which then send an asynchronous interrupt). There are many different scenarios that could hit this bug, most of them races. The simplest one to demonstrate does not require any race: when one signal has done handler setup at the check before returning from a syscall, and there is another signal pending that should be handled. The second signal's handler should interrupt the first signal handler before it actually starts (so the interrupted PC is still at the handler's entry point). Instead, it runs away until the next kernel entry (next syscall, tick, etc). This test behaves correctly on 32-bit kernels, and fails on 64-bit (either 32-bit or 64-bit test binary). With this fix, it works. #define _GNU_SOURCE #include <stdio.h> #include <signal.h> #include <string.h> #include <sys/ucontext.h> #ifndef REG_RIP #define REG_RIP REG_EIP #endif static sig_atomic_t hit1, hit2; static void handler (int sig, siginfo_t *info, void *ctx) { ucontext_t *uc = ctx; if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler) { if (sig == SIGUSR1) hit1 = 1; else hit2 = 1; } printf ("%s at %#lx\n", strsignal (sig), uc->uc_mcontext.gregs[REG_RIP]); } int main (void) { struct sigaction sa; sigset_t set; sigemptyset (&sa.sa_mask); sa.sa_flags = SA_SIGINFO; sa.sa_sigaction = &handler; if (sigaction (SIGUSR1, &sa, NULL) || sigaction (SIGUSR2, &sa, NULL)) return 2; sigemptyset (&set); sigaddset (&set, SIGUSR1); sigaddset (&set, SIGUSR2); if (sigprocmask (SIG_BLOCK, &set, NULL)) return 3; printf ("main at %p, handler at %p\n", &main, &handler); raise (SIGUSR1); raise (SIGUSR2); if (sigprocmask (SIG_UNBLOCK, &set, NULL)) return 4; if (hit1 + hit2 == 1) { puts ("PASS"); return 0; } puts ("FAIL"); return 1; } Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: rename threadinfo to TI.Glauber Costa
This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>