aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/mfgpt_32.c
AgeCommit message (Collapse)Author
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, geode-mfgpt: check IRQ before using MFGPT as clocksourceJens Rottmann
Adds a simple IRQ autodetection to the AMD Geode MFGPT driver, and more importantly, adds some checks, if IRQs can actually be received on the chosen line. This fixes cases where MFGPT is selected as clocksource though not producing any ticks, so the kernel simply starves during boot. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Cc: Andres Salomon <dilinger@debian.org> Cc: linux-geode@bombadil.infradead.org Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12geode: fix modular buildIngo Molnar
-tip testing found this build bug: MODPOST 331 modules ERROR: "geode_mfgpt_toggle_event" [drivers/watchdog/geodewdt.ko] undefined! ERROR: "geode_mfgpt_alloc_timer" [drivers/watchdog/geodewdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 with this config: http://redhat.com/~mingo/misc/config-Wed_Jun__4_18_01_59_CEST_2008.bad export those symbols. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-28x86: geode: MSR cleanupAndres Salomon
This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-26x86: cleanup div_sc() usageAkinobu Mita
Remove the magic number in the third argment of div_sc(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: GEODE: add missing module.h includeAndres Salomon
On Wed, 26 Mar 2008 11:56:22 -0600 Jordan Crouse <jordan.crouse@amd.com> wrote: > On 26/03/08 14:31 +0100, Stefan Pfetzing wrote: > > Hello Jordan, > > > > I just tried to build your geodwdt driver for the geode watchdog. Therefore > > I pulled your repository from http://git.infradead.org/geode.git (or more, > > the git url). > > > > I tried to build the geodewdt driver as a module - which didn't work, and > > it failed with the same problem as earlier mentioned on lkmk [1]. I also > > checked the fix [2], but that seems to be already in your (or linus) tree - > > and so I'm unsure what the problem is. > > > > [1] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884074 > > [2] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884174 > > > > Building directly into the kernel seems to work. > > > > Maybe you have some idea? > > Hmm - that is strange. Exporting the symbols should work. I recommend > starting over with a clean tree. > > CCing Andres - any thoughts? > > Jordan > Er, yeah. The patch below should fix it. This should probably go into 2.6.25. Oops, EXPORT_SYMBOL_GPL wasn't being declared due to this header being missing. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-09x86: GEODE: MFGPT: fix typo in printk in mfgpt_timer_setupArnd Hannemann
Signed-off-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: make sure the right MFGPT timer fired the timer tickJordan Crouse
Each AMD Geode MFGPT timer interrupt output is paired with another timer; esentially the interrupt goes if either timer fires. This is okay, but the handlers need to be aware of this. Make sure in the timer tick handler that our timer really did expire. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: fix a potential race when disabling a timerAndres Salomon
We *really* don't want to be reading MFGPTx_SETUP and writing back those values. What we want to be doing is clearing CMP1 and CMP2 unconditionally; otherwise, we have races where CMP1 and/or CMP2 fire after we've read MFGPTx_SETUP. They can also fire between when we've written ~CNTEN to the register, and when the new register values get copied to the timer's version of the register. By clearing both fields, we're okay. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: Use "just-in-time" detection for the MFGPT timersJordan Crouse
There isn't much value to always detecting the MFGPT timers on Geode platforms; detection is only needed when something wants to use the timers. Move the detection code so that it gets called the first time a timer is allocated. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: make mfgpt_timer_setup available outside of mfgpt_32.cAndres Salomon
We need to be called from elsewhere, and this gets some #ifdefs out of the .c file. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: replace 'flags' field with 'avail' bitAndres Salomon
Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit. This looks more understandable to me. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: drop module owner usage from MFGPT APIAndres Salomon
We had planned to use the 'owner' field for allowing re-allocation of MFGPTs; however, doing it by module owner name isn't flexible enough. So, drop this for now. If it turns out that we need timers in modules, we'll need to come up with a scheme that matches the write-once fields of the MFGPTx_SETUP register, and drops ponies from the sky. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE fix MFGPT input clock valueWilly Tarreau
The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards run on a 32.768 kHz digital watch crystal. In practise, it will not change the timer's frequency as the skew was only 2.4%, but it should provide more accurate intervals. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09x86: GEODE: MFGPT: Minor cleanupsAndres Salomon
- uninline timer functions; the compiler knows better than we do whether or not to inline these. - mfgpt_start_timer() had an unused 'clock' argument, drop it. From both Jordan and myself. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timersWilly Tarreau
The new "mfgptfix" boot command line option may be usd to fix MFGPT timers on AMD Geode platforms when the BIOS has incorrectly applied a workaround. TinyBIOS version 0.98 is known to be affected, 0.99 fixes the problem by letting the user disable the workaround. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-22x86: GEODE fix a race condition in the MFGPT timer tickJordan Crouse
When we set the MFGPT timer tick, there is a chance that we'll immediately assert an event. If for some reason the IRQ routing for this clock has been setup for some other purpose, then we could end up firing an interrupt into the SMM handler or worse. This rearranges the timer tick init function to initalize the handler before we set up the MFGPT clock to make sure that even if we get an event, it will go to the handler. Furthermore, in the handler we need to make sure that we clear the event, even if the timer isn't running. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Tested-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
2007-10-12x86: Geode MFGPT clock event device supportAndres Salomon
Add support for an MFGPT clock event device; this allows us to use MFGPTs as the basis for high-resolution timers. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12x86: Geode Multi-Function General Purpose Timers supportAndres Salomon
This adds support for Multi-Function General Purpose Timers. It detects the available timers during southbridge init, and provides an API for allocating and setting the timers. They're higher resolution than the standard PIT, so the MFGPTs come in handy for quite a few things. Note that we never clobber the timers that the BIOS might have opted to use; we just check for unused timers. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 10:03:22 +0000