aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/setup.c
AgeCommit message (Collapse)Author
2008-08-11x86: fix 2.6.27rc1 cannot boot more than 8CPUsYinghai Lu
Jeff Chua reported that booting a !bigsmp kernel on a 16-way box hangs silently. this is a long-standing issue, smp start AP cpu could check the apic id >=8 etc before trying to start it. achieve this by moving the def_to_bigsmp check later and skip the apicid id > 8 [ mingo@elte.hu: clean up the message that is printed. ] Reported-by: "Jeff Chua" <jeff.chua.linux@gmail.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/kernel/setup.c | 6 ------ arch/x86/kernel/smpboot.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 6 deletions(-)
2008-08-08x86: Fix broken VMI in 2.6.27-rc..Alok Kataria
The lowmem mapping table created by VMI need not depend on max_low_pfn at all. Instead we now create an extra large mapping which covers all possible lowmem instead of the physical ram that is actually available. This allows the vmi initialization to be done before max_low_pfn could be computed. We also move the vmi_init code very early in the boot process so that nobody accidentally breaks the fixmap dependancy. Signed-off-by: Alok N Kataria <akataria@vmware.com> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-28Merge branch 'x86/crashdump' into x86/urgentIngo Molnar
2008-07-24x86: call early_cpu_init at the same pointJeremy Fitzhardinge
Call early_cpu_init() at the same (early) point in setup_arch(). The x86_64 code was calling it relatively late, after when other arch code need to do cpu-related setup which depends on it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22x86: use setup_clear_cpu_cap with disable_apic, fixYinghai Lu
beauty fix: /proc/cpuinfo will still show apic feature even if we booted up with it disabled. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
2008-07-20x86: add ->pre_time_init to x86_quirksYinghai Lu
so NUMAQ can use that to call numaq_pre_time_init() This allows us to remove a NUMAQ special from arch/x86/kernel/setup.c. (and paves the way to remove the NUMAQ subarch) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20x86: introduce x86_quirksYinghai Lu
introduce x86_quirks array of boot-time quirk methods. No change in functionality intended. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: move dma32_reserve_bootmem() after reserve_crashkernel()Bernhard Walle
On a x86-64 machine (nothing special I could encounter) I had the problem that crashkernel reservation with the usual "64M@16M" failed. While debugging that, I encountered that dma32_reserve_bootmem() reserves a memory region which is in that area. Because dma32_reserve_bootmem() does not rely on a specific offset but crashkernel does, it makes sense to move the dma32_reserve_bootmem() reservation down a bit. I tested that patch and it works without problems. I don't see any negative effects of that move, but maybe I oversaw something ... While we strictly don't need that patch in 2.6.27 because we have the automatic, dynamic offset detection, it makes sense to also include it here because: - it's easier to get it in -stable then, - many people are still used to the 'crashkernel=...@16M' syntax, - not everybody may be using a reloatable kernel. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: kexec@lists.infradead.org Cc: vgoyal@redhat.com Cc: akpm@linux-foundation.org Cc: Bernhard Walle <bwalle@suse.de> Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86 setup.c: cleanup includesAlexander Beregalov
x86: remove double includes in setup.c Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-17Merge branch 'linus' into xen-64bitIngo Molnar
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16pvops-64: call paravirt_post_allocator_init() on setup_arch()Eduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16x86/paravirt: call paravirt_pagetable_setup_{start, done}Eduardo Habkost
Call paravirt_pagetable_setup_{start,done} These paravirt_ops functions were not being called on x86_64. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-13x86: fix numaq_tsc_disable callingYinghai Lu
got this on a test-system: calling numaq_tsc_disable+0x0/0x39 NUMAQ: disabling TSC initcall numaq_tsc_disable+0x0/0x39 returned 0 after 0 msecs that's because we should not be using arch_initcall to call numaq_tsc_disable. need to call it in setup_arch before time_init()/tsc_init() and call it in init_intel() to make the cpu feature bits right. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11Merge branch 'x86/generalize-visws' into x86/coreIngo Molnar
2008-07-11x86: make only GART code include gart.hFUJITA Tomonori
gart.h has only GART-specific stuff. Only GART code needs it. Other IOMMU stuff should include iommu.h instead of gart.h. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: introduce max_low_pfn_mapped for 64-bitYinghai Lu
when more than 4g memory is installed, don't map the big hole below 4g. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86: add early quirk supportIngo Molnar
Add early quirks support. In preparation of enabling the generic architecture to boot on a VISWS. This will allow us to remove the VISWS subarch and all its complications. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: make max_pfn cover acpi table below 4gYinghai Lu
When system have 4g less ram installed, and acpi table sit near end of ram, make max_pfn cover them too, so 64bit kernel don't need to mess up fixmap. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Suresh Siddha" <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: make e820_saved have update from setup_dataYinghai Lu
seperate reserve_setup_data into e820_reserved_setup_data, and reserve_early_setup_data. So could use e820_reserved_setup_data to backup e820 with setup_data. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Ying Huang <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move prefill_possible_map calling earlyYinghai Lu
call it right after we are done with MADT/mptable handling, instead of doing that in setup_per_cpu_areas() later on... this way for_possible_cpu() can be used early. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move init_cpu_to_node after get_smp_configYinghai Lu
when acpi=off, cpu_to_apicid is ready after get_smp_config so need to move init_cpu_to_node after it. otherwise, we will get wrong cpu->node mapping, and it will rely on amd_detect_cmp() to correct it - but that is too late as setup_per_cpu_data is already called before that so we will get per_cpu_data on the wrong node. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: merge zones_sizes_init for numa and non numa on 32-bitYinghai Lu
move out e820_register_active_regions from non numa zones_sizes_init() and remove numa version zones_sizes_init(). and let 32 bit call remove_all_active_ranges() in setup_arch() directly like 64-bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: do not printout if we do not find setup_dataYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: find offset for crashkernel reservation automaticallyBernhard Walle
This patch removes the need of the crashkernel=...@offset parameter to define a fixed offset for crashkernel reservation. That feature can be used together with a relocatable kernel where the kexec-tools relocate the kernel and get the actual offset from /proc/iomem. The use case is a kernel where the .text+.data+.bss is after 16M physical memory (debug kernel with lockdep on x86_64 can cause that) which caused a major pain in autoconfiguration in our distribution. Also, that patch unifies crashdump architectures a bit since IA64 has that semantics from the very beginning of the kdump port. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: vgoyal@redhat.com Cc: Bernhard Walle <bwalle@suse.de> Cc: kexec@lists.infradead.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move reserve_setup_data to setup.cYinghai Lu
Ying Huang would like setup_data to be reserved, but not included in the no save range. Here we try to modify the e820 table to reserve that range early. also add that in early_res in case bootloader messes up with the ramdisk. other solution would be 1. add early_res_to_highmem... 2. early_res_to_e820... but they could reserve another type memory wrongly, if early_res has some resource reserved early, and not needed later, but it is not removed from early_res in time. Like the RAMDISK (already handled). Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: andi@firstfloor.org Tested-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: setup_arch() && early_ioremap_init()Jeremy Fitzhardinge
Looks like the setup.c unification missed the early_ioremap init from the early_ioremap unification. Unconditionally call early_ioremap_init(). needed for "x86/paravirt: groundwork for 64-bit Xen support". Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mark McLoughlin <markmc@redhat.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: use disable_apic in 32bitYinghai Lu
change the enable_local_apic to static force_enable_local_apic for 32bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: let setup_arch call init_apic_mappings for 32bitYinghai Lu
instead of calling it from trap_init() also move init ioapic mapping out of apic_32.c so 32 bit do same as 64 bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move fix mapping page table range earlyYinghai Lu
do that in init_memory_mapping also remove one init_ohci1394_dma_on_all_controllers Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: clean up ARCH_SETUPYinghai Lu
asm-x86/paravirt.h already have protection with CONFIG_PARAVIRT inside Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: build fixIngo Molnar
fix: In file included from arch/x86/kernel/setup.c:118: include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘do' include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘while' include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘do' include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘while' Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: remove extra newline from setup.cIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: we only have init_pg_tables_end for 32bitYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: change some functions in setup.c to staticYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: make x86_find_smp_config depends on 64 bit tooYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move parse elfvorehdr back to setup.cYinghai Lu
Signed-off-by: Yinghai <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move reserve_standard_io_resources back to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move back crashkernel back to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move parse_setup_data back to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move boot_params back to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: rename setup_32.c to setup.cYinghai Lu
and let 64 bit use that instead of setup_64.c [ mingo@elte.hu ] x86: build fix fix: arch/x86/kernel/setup.c: In function ‘setup_arch': arch/x86/kernel/setup.c:561: error: implicit declaration of function ‘efi_reserve_early' and: arch/x86/kernel/setup.c:766: error: implicit declaration of function 'init_cpu_to_node' and: arch/x86/kernel/setup.c:676: warning: operation on 'max_pfn_mapped' may be undefined Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: rename setup.c to setup_percpu.cYinghai Lu
some functions need to be moved to setup_numa.c after we merge setup32/64.c, some funcs need to be moved back to setup.c Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move boot_params declaring to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move elfcorehdr parsing to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: move reserve_standard_io_resource to setup.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: check command line when CONFIG_X86_MPPARSE is not set, v2Yinghai Lu
if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: unify crashkernel reservation for 32 and 64 bitBernhard Walle
This patch moves the reserve_crashkernel() to setup.c and removes the architecture-specific version. Both versions were more or less the same. I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so that it compiles). Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/numa' into x86/develIngo Molnar
Conflicts: arch/x86/Kconfig arch/x86/kernel/e820.c arch/x86/kernel/efi_64.c arch/x86/kernel/mpparse.c arch/x86/kernel/setup.c arch/x86/kernel/setup_32.c arch/x86/mm/init_64.c include/asm-x86/proto.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 19:03:18 +0000