| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <1249847649-11631-6-git-send-email-marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
No code changes except printk levels (although some of the K6
mtrr code might be clearer if there were a few as would
splitting out some of the intel cache code).
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Remove duplicated #include in:
arch/x86/kernel/dumpstack.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
helper
We already use a lot of cpu_has_ helpers.
Lets do here the same for consistency.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090705160154.GB4791@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
hardcoded number
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090708180353.GH5301@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Yinghai noticed that i defined BIOS_BUG_MSG but added no
usage for it. The usage is to clean up this turd in generic.c:
printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
"contains strange UC entry under 1M, check "
"with your system vendor!\n", i);
Breaking printk lines in the middle looks ugly, is hard to read
and breaks 'git grep'. Use the BIOS_BUG_MSG instead.
Also complete the moving of structure definitions and variables
to the top of the file.
Reported-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix following trivial style problems:
ERROR: trailing whitespace X 25
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>
ERROR: do not initialise externals to 0 or NULL X 2
ERROR: "foo * bar" should be "foo *bar" X 5
ERROR: do not use assignment in if condition X 2
WARNING: line over 80 characters X 8
ERROR: return is not a function, parentheses are not required
WARNING: braces {} are not necessary for any arm of this statement
ERROR: space required before the open parenthesis '(' X 2
ERROR: open brace '{' following function declarations go on the next line
ERROR: space required after that ',' (ctx:VxV) X 8
ERROR: space required before the open parenthesis '(' X 3
ERROR: else should follow close brace '}'
WARNING: space prohibited between function name and open parenthesis '('
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable X 2
Also use pr_debug and pr_warning where possible.
total: 50 errors, 14 warnings
arch/x86/kernel/cpu/mtrr/main.o:
text data bss dec hex filename
3668 116 4156 7940 1f04 main.o.before
3668 116 4156 7940 1f04 main.o.after
md5:
e01af2fd28deef77c8d01e71acfbd365 main.o.before.asm
e01af2fd28deef77c8d01e71acfbd365 main.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Cc: Avi Kivity <avi@redhat.com> # Avi, please have a look at the kvm_para.h bit
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: line over 80 characters X 4
arch/x86/kernel/cpu/mtrr/state.o:
text data bss dec hex filename
864 0 0 864 360 state.o.before
864 0 0 864 360 state.o.after
md5:
c5c4364b9aeac74d70111e1e49667a2c state.o.before.asm
c5c4364b9aeac74d70111e1e49667a2c state.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix:
ERROR: do not use C99 // comments
ERROR: "foo * bar" should be "foo *bar" X 2
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More tidyups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
ERROR: trailing whitespace X 7
ERROR: trailing statements should be on next line X 3
WARNING: line over 80 characters X 5
ERROR: space required before the open parenthesis '('
arch/x86/kernel/cpu/mtrr/if.o:
text data bss dec hex filename
2239 4 0 2243 8c3 if.o.before
2239 4 0 2243 8c3 if.o.after
md5:
78d1f2aa4843ec6509c18e2dee54bc7f if.o.before.asm
78d1f2aa4843ec6509c18e2dee54bc7f if.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups to make the code more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix following trivial style problems:
ERROR: trailing whitespace X 4
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: braces {} are not necessary for single statement blocks X 3
ERROR: "foo * bar" should be "foo *bar"
WARNING: line over 80 characters X 6
ERROR: "foo * bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxO)
ERROR: space required before that '-' (ctx:OxV)
WARNING: suspect code indent for conditional statements (8, 12)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: do not initialise statics to 0 or NULL
ERROR: space prohibited after that open parenthesis '(' X 2
ERROR: space prohibited before that close parenthesis ')' X 2
ERROR: trailing statements should be on next line
ERROR: return is not a function, parentheses are not required
Also use pr_debug and pr_warning where possible.
arch/x86/kernel/cpu/mtrr/generic.o:
text data bss dec hex filename
5652 77 4224 9953 26e1 generic.o.before
5652 77 4220 9949 26dd generic.o.after
The md5 changed:
b34d6c045f06daa4ed092b90cc760e8f generic.o.before.asm
a490c6251cfd8442fbffecc0e09a573d generic.o.after.asm
Because mtrr_state moved from data to bss, changing its
offsets - and also because __LINE__ numbers changed.
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Further cleanups to make the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix trivial style problems:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: line over 80 characters
ERROR: do not initialise statics to 0 or NULL
ERROR: space prohibited after that open parenthesis '(' X 2
ERROR: space prohibited before that close parenthesis ')' X 2
ERROR: trailing whitespace X 2
ERROR: trailing statements should be on next line
ERROR: do not use C99 // comments X 2
arch/x86/kernel/cpu/mtrr/cyrix.o:
text data bss dec hex filename
1637 32 8 1677 68d cyrix.o.before
1637 32 8 1677 68d cyrix.o.after
md5:
6f52abd06905be3f4cabb5239f9b0ff0 cyrix.o.before.asm
6f52abd06905be3f4cabb5239f9b0ff0 cyrix.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Made the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix trivial style problems:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>
Also, nr_mtrr_spare_reg should be unsigned long.
arch/x86/kernel/cpu/mtrr/cleanup.o:
text data bss dec hex filename
6241 8992 2056 17289 4389 cleanup.o.before
6241 8992 2056 17289 4389 cleanup.o.after
The md5 has changed:
1a7a27513aef1825236daf29110fe657 cleanup.o.before.asm
bcea358efa2532b6020e338e158447af cleanup.o.after.asm
Because a WARN_ON()'s __LINE__ value changed by 3 lines.
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Did lots of other cleanups to make the code look more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Remove dead code and fix trivial style problems:
ERROR: trailing whitespace X 2
WARNING: line over 80 characters X 3
ROR: trailing whitespace
ERROR: do not use C99 // comments X 2
arch/x86/kernel/cpu/mtrr/centaur.o:
text data bss dec hex filename
605 32 68 705 2c1 centaur.o.before
605 32 68 705 2c1 centaur.o.after
md5:
a4865ea98ce3c163bb1d376a3949b3e3 centaur.o.before.asm
a4865ea98ce3c163bb1d376a3949b3e3 centaur.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Standardized comments, DocBook, curly braces, newlines. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix trivial style problems :
ERROR: trailing whitespace
WARNING: line over 80 characters
ERROR: do not use C99 // comments
arch/x86/kernel/cpu/mtrr/amd.o:
text data bss dec hex filename
501 32 0 533 215 amd.o.before
501 32 0 533 215 amd.o.after
md5:
62f795eb840ee2d17b03df89e789e76c amd.o.before.asm
62f795eb840ee2d17b03df89e789e76c amd.o.after.asm
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Also restructured comments to be standard, removed stray return,
converted function description to DocBook style, etc. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Merge reason: We were on an older pre-rc1 base, move to almost-rc2.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
* git://git.infradead.org/iommu-2.6: (38 commits)
intel-iommu: Don't keep freeing page zero in dma_pte_free_pagetable()
intel-iommu: Introduce first_pte_in_page() to simplify PTE-setting loops
intel-iommu: Use cmpxchg64_local() for setting PTEs
intel-iommu: Warn about unmatched unmap requests
intel-iommu: Kill superfluous mapping_lock
intel-iommu: Ensure that PTE writes are 64-bit atomic, even on i386
intel-iommu: Make iommu=pt work on i386 too
intel-iommu: Performance improvement for dma_pte_free_pagetable()
intel-iommu: Don't free too much in dma_pte_free_pagetable()
intel-iommu: dump mappings but don't die on pte already set
intel-iommu: Combine domain_pfn_mapping() and domain_sg_mapping()
intel-iommu: Introduce domain_sg_mapping() to speed up intel_map_sg()
intel-iommu: Simplify __intel_alloc_iova()
intel-iommu: Performance improvement for domain_pfn_mapping()
intel-iommu: Performance improvement for dma_pte_clear_range()
intel-iommu: Clean up iommu_domain_identity_map()
intel-iommu: Remove last use of PHYSICAL_PAGE_MASK, for reserving PCI BARs
intel-iommu: Make iommu_flush_iotlb_psi() take pfn as argument
intel-iommu: Change aligned_size() to aligned_nrpages()
intel-iommu: Clean up intel_map_sg(), remove domain_page_mapping()
...
|
|
fix hang with HIGHMEM_64G and 32bit resource. According to hpa and
Linus, use (resource_size_t)-1 to fend off big ranges.
Analyzed by hpa
Reported-and-tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits)
perf report: Add --symbols parameter
perf report: Add --comms parameter
perf report: Add --dsos parameter
perf_counter tools: Adjust only prelinked symbol's addresses
perf_counter: Provide a way to enable counters on exec
perf_counter tools: Reduce perf stat measurement overhead/skew
perf stat: Use percentages for scaling output
perf_counter, x86: Update x86_pmu after WARN()
perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
perf stat: Improve output
perf stat: Fix multi-run stats
perf stat: Add -n/--null option to run without counters
perf_counter tools: Remove dead code
perf_counter: Complete counter swap
perf report: Print sorted callchains per histogram entries
perf_counter tools: Prepare a small callchain framework
perf record: Fix unhandled io return value
perf_counter tools: Add alias for 'l1d' and 'l1i'
perf-report: Add bare minimum PERF_EVENT_READ parsing
perf-report: Add modes for inherited stats and no-samples
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "x86: cap iomem_resource to addressable physical memory"
|
|
The print out should read the value before changing the value.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A487017.4090007@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, delay: tsc based udelay should have rdtsc_barrier
x86, setup: correct include file in <asm/boot.h>
x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
x86, mce: percpu mcheck_timer should be pinned
x86: Add sysctl to allow panic on IOCK NMI error
x86: Fix uv bau sending buffer initialization
x86, mce: Fix mce resume on 32bit
x86: Move init_gbpages() to setup_arch()
x86: ensure percpu lpage doesn't consume too much vmalloc space
x86: implement percpu_alloc kernel parameter
x86: fix pageattr handling for lpage percpu allocator and re-enable it
x86: reorganize cpa_process_alias()
x86: prepare setup_pcpu_lpage() for pageattr fix
x86: rename remap percpu first chunk allocator to lpage
x86: fix duplicate free in setup_pcpu_remap() failure path
percpu: fix too lazy vunmap cache flushing
x86: Set cpu_llc_id on AMD CPUs
|
|
This reverts commit 95ee14e4379c5e19c0897c872350570402014742.
Mikael Petterson <mikepe@it.uu.se> reported that at least one of his
systems will not boot as a result. We have ruled out the detection
algorithm malfunctioning, so it is not a matter of producing the
incorrect bitmasks; rather, something in the application of them
fails.
Revert the commit until we can root cause and correct this problem.
-stable team: this means the underlying commit should be rejected.
Reported-and-isolated-by: Mikael Petterson <mikpe@it.uu.se>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <200906261559.n5QFxJH8027336@pilspetsen.it.uu.se>
Cc: stable@kernel.org
Cc: Grant Grundler <grundler@parisc-linux.org>
|
|
If CONFIG_NO_HZ + CONFIG_SMP, timer added via add_timer() might
be migrated on other cpu. Use add_timer_on() instead.
Avoids the following failure:
Maciej Rutecki wrote:
> > After normal boot I try:
> >
> > echo 1 > /sys/devices/system/machinecheck/machinecheck0/check_interval
> >
> > I found this in dmesg:
> >
> > [ 141.704025] ------------[ cut here ]------------
> > [ 141.704039] WARNING: at arch/x86/kernel/cpu/mcheck/mce.c:1102
> > mcheck_timer+0xf5/0x100()
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
This patch introduces a new sysctl:
/proc/sys/kernel/panic_on_io_nmi
which defaults to 0 (off).
When enabled, the kernel panics when the kernel receives an NMI
caused by an IO error.
The IO error triggered NMI indicates a serious system
condition, which could result in IO data corruption. Rather
than contiuing, panicing and dumping might be a better choice,
so one can figure out what's causing the IO error.
This could be especially important to companies running IO
intensive applications where corruption must be avoided, e.g. a
bank's databases.
[ SuSE has been shipping it for a while, it was done at the
request of a large database vendor, for their users. ]
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Roberto Angelino <robertangelino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <20090624213211.GA11291@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Update the mmap control page with the needed information to
use the userspace RDPMC instruction for self monitoring.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (72 commits)
asus-laptop: remove EXPERIMENTAL dependency
asus-laptop: use pr_fmt and pr_<level>
eeepc-laptop: cpufv updates
eeepc-laptop: sync eeepc-laptop with asus_acpi
asus_acpi: Deprecate in favor of asus-laptop
acpi4asus: update MAINTAINER and KConfig links
asus-laptop: platform dev as parent for led and backlight
eeepc-laptop: enable camera by default
ACPI: Rename ACPI processor device bus ID
acerhdf: Acer Aspire One fan control
ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness
ACPI: run ACPI device hot removal in kacpi_hotplug_wq
ACPI: Add the reference count to avoid unloading ACPI video bus twice
ACPI: DMI to disable Vista compatibility on some Sony laptops
ACPI: fix a deadlock in hotplug case
Show the physical device node of backlight class device.
ACPI: pdc init related memory leak with physical CPU hotplug
ACPI: pci_root: remove unused dev/fn information
ACPI: pci_root: simplify list traversals
ACPI: pci_root: use driver data rather than list lookup
...
|
|
The initialization of the UV Broadcast Assist Unit's sending
buffers was making an invalid assumption about the
initialization of an MMR that defines its address.
The BIOS will not be providing that MMR. So
uv_activation_descriptor_init() should unconditionally set it.
Tested on UV simulator.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # for v2.6.30.x
LKML-Reference: <E1MJTfj-0005i1-W8@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Previous code made an assumption that the power on value of global
control MSR has enabled all fixed and general purpose counters properly.
However, this is not the case for certain Intel processors, such as
Atom - and it might also be firmware dependent.
Each enable bit in IA32_PERF_GLOBAL_CTRL is AND'ed with the
enable bits for all privilege levels in the respective IA32_PERFEVTSELx
or IA32_PERF_FIXED_CTR_CTRL MSRs to start/stop the counting of
respective counters. Counting is enabled if the AND'ed results is true;
counting is disabled when the result is false.
The end result is that all fixed counters are always disabled on Atom
processors because the assumption is just invalid.
Fix this by not initializing the ctrl-mask out of the global MSR,
but setting it to perf_counter_mask.
Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090624021324.GA2788@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
|
|
To support domain-isolation usages, the platform hardware must be
capable of uniquely identifying the requestor (source-id) for each
interrupt message. Without source-id checking for interrupt remapping
, a rouge guest/VM with assigned devices can launch interrupt attacks
to bring down anothe guest/VM or the VMM itself.
This patch adds source-id checking for interrupt remapping, and then
really isolates interrupts for guests/VMs with assigned devices.
Because PCI subsystem is not initialized yet when set up IOAPIC
entries, use read_pci_config_byte to access PCI config space directly.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
The init_gbpages() function is conditionally called from
init_memory_mapping() function. There are two call-sites where
this 'after_bootmem' condition can be true: setup_arch() and
mem_init() via pci_iommu_alloc().
Therefore, it's safe to move the call to init_gbpages() to
setup_arch() as it's always called before mem_init().
This removes an after_bootmem use - paving the way to remove
all uses of that state variable.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <Pine.LNX.4.64.0906221731210.19474@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
* git://git.infradead.org/~dwmw2/iommu-2.6.31:
intel-iommu: Fix one last ia64 build problem in Pass Through Support
VT-d: support the device IOTLB
VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps
VT-d: add device IOTLB invalidation support
VT-d: parse ATSR in DMA Remapping Reporting Structure
PCI: handle Virtual Function ATS enabling
PCI: support the ATS capability
intel-iommu: dmar_set_interrupt return error value
intel-iommu: Tidy up iommu->gcmd handling
intel-iommu: Fix tiny theoretical race in write-buffer flush.
intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing.
intel-iommu: Clean up handling of "caching mode" vs. context flushing.
VT-d: fix invalid domain id for KVM context flush
Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support
Intel IOMMU Pass Through Support
Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu into x86/urgent
|
|
On extreme configuration (e.g. 32bit 32-way NUMA machine), lpage
percpu first chunk allocator can consume too much of vmalloc space.
Make it fall back to 4k allocator if the consumption goes over 20%.
[ Impact: add sanity check for lpage percpu first chunk allocator ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
According to Andi, it isn't clear whether lpage allocator is worth the
trouble as there are many processors where PMD TLB is far scarcer than
PTE TLB. The advantage or disadvantage probably depends on the actual
size of percpu area and specific processor. As performance
degradation due to TLB pressure tends to be highly workload specific
and subtle, it is difficult to decide which way to go without more
data.
This patch implements percpu_alloc kernel parameter to allow selecting
which first chunk allocator to use to ease debugging and testing.
While at it, make sure all the failure paths report why something
failed to help determining why certain allocator isn't working. Also,
kill the "Great future plan" comment which had already been realized
quite some time ago.
[ Impact: allow explicit percpu first chunk allocator selection ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
lpage allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator. When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.
This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.
pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_lpage_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address. pageattr is updated to use
pcpu_lpage_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().
Jan Beulich spotted the original problem and incorrect usage of vaddr
instead of laddr for lookup.
With this, lpage percpu allocator should work correctly. Re-enable
it.
[ Impact: fix subtle lpage pageattr bug and re-enable lpage ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
Make the following changes in preparation of coming pageattr updates.
* Define and use array of struct pcpul_ent instead of array of
pointers. The only difference is ->cpu field which is set but
unused yet.
* Rename variables according to the above change.
* Rename local variable vm to pcpul_vm and move it out of the
function.
[ Impact: no functional difference ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
The "remap" allocator remaps large pages to build the first chunk;
however, the name isn't very good because 4k allocator remaps too and
the whole point of the remap allocator is using large page mapping.
The allocator will be generalized and exported outside of x86, rename
it to lpage before that happens.
percpu_alloc kernel parameter is updated to accept both "remap" and
"lpage" for lpage allocator.
[ Impact: code cleanup, kernel parameter argument updated ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
In the failure path, setup_pcpu_remap() tries to free the area which
has already been freed to make holes in the large page. Fix it.
[ Impact: fix duplicate free in failure path ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
Fix AMD's Data Cache Refills from System event.
After this patch :
./tools/perf/perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses ls /dev/ > /dev/null
Performance counter stats for 'ls /dev/':
2499484 L1-data-Cache-Load-Referencees (scaled from 3.97%)
70347 L1-data-Cache-Load-Misses (scaled from 7.30%)
9360 L1-data-Cache-Store-Referencees (scaled from 8.64%)
32804 L1-data-Cache-Prefetch-Referencees (scaled from 17.72%)
7693 L1-data-Cache-Prefetch-Misses (scaled from 22.97%)
2180945 L1-instruction-Cache-Load-Referencees (scaled from 28.48%)
14518 L1-instruction-Cache-Load-Misses (scaled from 35.00%)
2405 L1-instruction-Cache-Prefetch-Referencees (scaled from 34.89%)
71387 L2-Cache-Load-Referencees (scaled from 34.94%)
18732 L2-Cache-Load-Misses (scaled from 34.92%)
79918 L2-Cache-Store-Referencees (scaled from 36.02%)
1295294 Data-TLB-Cache-Load-Referencees (scaled from 35.99%)
30896 Data-TLB-Cache-Load-Misses (scaled from 33.36%)
1222030 Instruction-TLB-Cache-Load-Referencees (scaled from 29.46%)
357 Instruction-TLB-Cache-Load-Misses (scaled from 20.46%)
530888 Branch-Cache-Load-Referencees (scaled from 11.48%)
8638 Branch-Cache-Load-Misses (scaled from 5.09%)
0.011295149 seconds time elapsed.
Earlier it always shows value 0.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1245484165.3102.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This counts when building sched domains in case NUMA information
is not available.
( See cpu_coregroup_mask() which uses llc_shared_map which in turn is
created based on cpu_llc_id. )
Currently Linux builds domains as follows:
(example from a dual socket quad-core system)
CPU0 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 0 1 2 3 4 5 6 7
...
CPU7 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 7 0 1 2 3 4 5 6
Ever since that is borked for multi-core AMD CPU systems.
This patch fixes that and now we get a proper:
CPU0 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 0 1 2 3
domain 1: span 0-7 level CPU
groups: 0-3 4-7
...
CPU7 attaching sched-domain:
domain 0: span 4-7 level MC
groups: 7 4 5 6
domain 1: span 0-7 level CPU
groups: 4-7 0-3
This allows scheduler to assign tasks to cores on different sockets
(i.e. that don't share last level cache) for performance reasons.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20090619085909.GJ5218@alberich.amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
perfcounter: Handle some IO return values
perf_counter: Push perf_sample_data through the swcounter code
perf_counter tools: Define and use our own u64, s64 etc. definitions
perf_counter: Close race in perf_lock_task_context()
perf_counter, x86: Improve interactions with fast-gup
perf_counter: Simplify and fix task migration counting
perf_counter tools: Add a data file header
perf_counter: Update userspace callchain sampling uses
perf_counter: Make callchain samples extensible
perf report: Filter to parent set by default
perf_counter tools: Handle lost events
perf_counter: Add event overlow handling
fs: Provide empty .set_page_dirty() aop for anon inodes
perf_counter: tools: Makefile tweaks for 64-bit powerpc
perf_counter: powerpc: Add processor back-end for MPC7450 family
perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
perf_counter: powerpc: Change how processor-specific back-ends get selected
perf_counter: powerpc: Use unsigned long for register and constraint values
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
perf_counter tools: Add and use isprint()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix out of scope variable access in sched_slice()
sched: Hide runqueues from direct refer at source code level
sched: Remove unneeded __ref tag
sched, x86: Fix cpufreq + sched_clock() TSC scaling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits)
x86, mce: fix error path in mce_create_device()
x86: use zalloc_cpumask_var for mce_dev_initialized
x86: fix duplicated sysfs attribute
x86: de-assembler-ize asm/desc.h
i386: fix/simplify espfix stack switching, move it into assembly
i386: fix return to 16-bit stack from NMI handler
x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present
x86: Remove duplicated #include's
x86: msr.h linux/types.h is only required for __KERNEL__
x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround
x86, mce: mce_intel.c needs <asm/apic.h>
x86: apic/io_apic.c: dmar_msi_type should be static
x86, io_apic.c: Work around compiler warning
x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present
x86: mce: Handle banks == 0 case in K7 quirk
x86, boot: use .code16gcc instead of .code16
x86: correct the conversion of EFI memory types
x86: cap iomem_resource to addressable physical memory
x86, mce: rename _64.c files which are no longer 64-bit-specific
x86, mce: mce.h cleanup
...
Manually fix up trivial conflict in arch/x86/mm/fault.c
|
|
Fixes the type mixups that cause the following sparse warnings:
CHECK arch/x86/kernel/ds.c
arch/x86/kernel/ds.c:549:19: warning: incorrect type in argument 2 (invalid types)
arch/x86/kernel/ds.c:549:19: expected bad type enum bts_field field
arch/x86/kernel/ds.c:549:19: got int
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:520:35: left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:520:35: right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:520:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <1245494740.8613.12.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated
for _PDC objects that is never freed and will cause memory leak in case of
physical CPU remove and add. Patch fixes the memory leak by freeing the
objects soon after _PDC is evaluated.
Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
