aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2008-10-19Merge branch 'linus' into tracing-v28-for-linus-v3Ingo Molnar
Conflicts: init/main.c kernel/module.c scripts/bootgraph.pl
2008-10-16Merge branch 'kvm-updates/2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits) KVM: ia64: Add intel iommu support for guests. KVM: ia64: add directed mmio range support for kvm guests KVM: ia64: Make pmt table be able to hold physical mmio entries. KVM: Move irqchip_in_kernel() from ioapic.h to irq.h KVM: Separate irq ack notification out of arch/x86/kvm/irq.c KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs KVM: Move device assignment logic to common code KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/ KVM: VMX: enable invlpg exiting if EPT is disabled KVM: x86: Silence various LAPIC-related host kernel messages KVM: Device Assignment: Map mmio pages into VT-d page table KVM: PIC: enhance IPI avoidance KVM: MMU: add "oos_shadow" parameter to disable oos KVM: MMU: speed up mmu_unsync_walk KVM: MMU: out of sync shadow core KVM: MMU: mmu_convert_notrap helper KVM: MMU: awareness of new kvm_mmu_zap_page behaviour KVM: MMU: mmu_parent_walk KVM: x86: trap invlpg KVM: MMU: sync roots on mmu reload ...
2008-10-16Merge branch 'core-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually.
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16x86: convert Calgary IOMMU driver to generic iommu_num_pages functionJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16x86, AMD IOMMU: convert driver to generic iommu_num_pages functionJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16x86: convert GART driver to generic iommu_num_pages functionJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16x86: rename iommu_num_pages function to iommu_nr_pagesJoerg Roedel
This series of patches re-introduces the iommu_num_pages function so that it can be used by each architecture specific IOMMU implementations. The series also changes IOMMU implementations for X86, Alpha, PowerPC and UltraSparc. The other implementations are not yet changed because the modifications required are not obvious and I can't test them on real hardware. This patch: This is a preparation patch for introducing a generic iommu_num_pages function. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16Make the taint flags reliableAndi Kleen
It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16sysfs: crash debuggingAndrew Morton
Print the name of the last-accessed sysfs file when we oops, to help track down oopses which occur in sysfs store/read handlers. Because these oopses tend to not leave any trace of the offending code in the stack traces. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-15x86: pvclock: fix shadowed variable warningHarvey Harrison
arch/x86/kernel/pvclock.c:102:6: warning: symbol 'tsc_khz' shadows an earlier one include/asm/tsc.h:18:21: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15Merge branches 'core/softlockup', 'core/softirq', 'core/resources', ↵Ingo Molnar
'core/printk' and 'core/misc' into core-v28-for-linus
2008-10-15x86: KVM guest: use paravirt function to calculate cpu khzGlauber Costa
We're currently facing timing problems in guests that do calibration under heavy load, and then the load vanishes. This means we'll have a much lower lpj than we actually should, and delays end up taking less time than they should, which is a nasty bug. Solution is to pass on the lpj value from host to guest, and have it preset. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15x86: paravirt: factor out cpu_khz to common codeGlauber Costa
KVM intends to use paravirt code to calibrate khz. Xen current code will do just fine. So as a first step, factor out code to pvclock.c. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-14x86: register a platform RTC device if PNP doesn't describe itBjorn Helgaas
Most if not all x86 platforms have an RTC device, but sometimes the RTC is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188 It's best if we can discover the RTC via PNP because then we know which flavor of device it is, where it lives, and which IRQ it uses. But if we can't, we should register a platform device using the compiled-in RTC_PORT/RTC_IRQ resource assumptions. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Reported-by: Rik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14ftrace: make ftrace_test_p6nop disassembler-friendlyAnders Kaseorg
Commit 4c3dc21b136f8cb4b72afee16c3ba7e961656c0b in tip introduced the 5-byte NOP ftrace_test_p6nop: jmp . + 5 .byte 0x00, 0x00, 0x00 This is not friendly to disassemblers because an odd number of 0x00s ends in the middle of an instruction boundary. This changes the 0x00s to 1-byte NOPs (0x90). Signed-off-by: Anders Kaseorg <andersk@mit.edu> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86/ftrace: use uaccess in atomic contextFrédéric Weisbecker
With latest -tip I get this bug: [ 49.439988] in_atomic():0, irqs_disabled():1 [ 49.440118] INFO: lockdep is turned off. [ 49.440118] Pid: 2814, comm: modprobe Tainted: G W 2.6.27-rc7 #4 [ 49.440118] [<c01215e1>] __might_sleep+0xe1/0x120 [ 49.440118] [<c01148ea>] ftrace_modify_code+0x2a/0xd0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016e80e>] __ftrace_update_code+0xfe/0x2f0 [ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa [ 49.440118] [<c016f190>] ftrace_convert_nops+0x50/0x80 [ 49.440118] [<c016f1d6>] ftrace_init_module+0x16/0x20 [ 49.440118] [<c015498b>] load_module+0x185b/0x1d30 [ 49.440118] [<c01767a0>] ? find_get_page+0x0/0xf0 [ 49.440118] [<c02463c0>] ? sprintf+0x0/0x30 [ 49.440118] [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350 [ 49.440118] [<c0154eb3>] sys_init_module+0x53/0x1b0 [ 49.440118] [<c0352340>] ? do_page_fault+0x0/0x740 [ 49.440118] [<c0104012>] syscall_call+0x7/0xb [ 49.440118] ======================= It is because ftrace_modify_code() calls copy_to_user and copy_from_user. These functions have been inserted after guessing that there couldn't be any race condition but copy_[to/from]_user might sleep and __ftrace_update_code is called with local_irq_saved. These function have been inserted since this commit: d5e92e8978fd2574e415dc2792c5eb592978243d: "ftrace: x86 use copy from user function" Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86: suppress trivial sparse signedness warningsHarvey Harrison
Could just as easily change the three casts to cast to the correct type...this patch changes the type of ftrace_nop instead. Supresses sparse warnings: arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:157:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:157:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:161:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:161:14: got unsigned long *<noident> arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness) arch/x86/kernel/ftrace.c:165:14: expected long *static [toplevel] ftrace_nop arch/x86/kernel/ftrace.c:165:14: got unsigned long *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: x86 use copy to and from user functionsSteven Rostedt
The modification of code is performed either by kstop_machine, before SMP starts, or on module code before the module is executed. There is no reason to do the modifications from assembly. The copy to and from user functions are sufficient and produces cleaner and easier to read code. Thanks to Benjamin Herrenschmidt for suggesting the idea. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: use only 5 byte nops for x86Steven Rostedt
Mathieu Desnoyers revealed a bug in the original code. The nop that is used to relpace the mcount caller can be a two part nop. This runs the risk where a process can be preempted after executing the first nop, but before the second part of the nop. The ftrace code calls kstop_machine to keep multiple CPUs from executing code that is being modified, but it does not protect against a task preempting in the middle of a two part nop. If the above preemption happens and the tracer is enabled, after the kstop_machine runs, all those nops will be calls to the trace function. If the preempted process that was preempted between the two nops is executed again, it will execute half of the call to the trace function, and this might crash the system. This patch instead uses what both the latest Intel and AMD spec suggests. That is the P6_NOP5 sequence of "0x0f 0x1f 0x44 0x00 0x00". Note, some older CPUs and QEMU might fault on this nop, so this nop is executed with fault handling first. If it detects a fault, it will then use the code "0x66 0x66 0x66 0x66 0x90". If that faults, it will then default to a simple "jmp 1f; .byte 0x00 0x00 0x00; 1:". The jmp is not optimal but will do if the first two can not be executed. TODO: Examine the cpuid to determine the nop to use. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: x86 mcount stubSteven Rostedt
x86 now sets up the mcount locations through the build and no longer needs to record the ip when the function is executed. This patch changes the initial mcount to simply return. There's no need to do any other work. If the ftrace start up test fails, the original mcount will be what everything will use, so having this as fast as possible is a good thing. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: mark lapic_wd_event() notraceIngo Molnar
it can be called in the NMI path: [ 0.645999] calling ftrace_dynamic_init+0x0/0xd6 [ 0.647521] ------------[ cut here ]------------ [ 0.647521] WARNING: at kernel/trace/ftrace.c:348 ftrace_record_ip+0x4e/0x252() [ 0.647521] Modules linked in: [ 0.647521] Pid: 15, comm: kstop1 Not tainted 2.6.27-rc1-tip #22686 [ 0.647521] [ 0.647521] Call Trace: [ 0.647521] <NMI> [<ffffffff8024593f>] warn_on_slowpath+0x5d/0x84 [ 0.647521] [<ffffffff80220b99>] ? lapic_wd_event+0xb/0x5c [ 0.647521] [<ffffffff80287b3b>] ftrace_record_ip+0x4e/0x252 [ 0.647521] [<ffffffff80211274>] mcount_call+0x5/0x31 [ 0.647521] [<ffffffff80220b9e>] ? lapic_wd_event+0x10/0x5c [ 0.647521] [<ffffffff8083f3ec>] nmi_watchdog_tick+0x19d/0x1ad [ 0.647521] [<ffffffff8083e875>] default_do_nmi+0x75/0x1e3 [ 0.647521] [<ffffffff8083f0b3>] do_nmi+0x5d/0x94 [ 0.647521] [<ffffffff8083e2d2>] nmi+0xa2/0xc2 [ 0.647521] [<ffffffff802b48c3>] ? check_bytes_and_report+0x11/0xcc [ 0.647521] <<EOE>> [<ffffffff80211274>] ? mcount_call+0x5/0x31 [ 0.647521] [<ffffffff802b49df>] check_object+0x61/0x1b0 [ 0.647521] [<ffffffff802b502a>] __slab_free+0x169/0x2ae [ 0.647521] [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff802b60cd>] kmem_cache_free+0x85/0xb9 [ 0.647521] [<ffffffff80242dbf>] __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff80247b3d>] release_task+0x256/0x339 [ 0.647521] [<ffffffff802490b4>] do_exit+0x764/0x7ef [ 0.647521] [<ffffffff8027624c>] __xchg+0x0/0x38 [ 0.647521] [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2 [ 0.647521] [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2 [ 0.647521] [<ffffffff8025922f>] kthread+0x4e/0x7b [ 0.647521] [<ffffffff80212979>] child_rip+0xa/0x11 [ 0.647521] [<ffffffff80211c17>] ? restore_args+0x0/0x30 [ 0.647521] [<ffffffff802283a5>] ? native_load_tls+0x14/0x2e [ 0.647521] [<ffffffff802591e1>] ? kthread+0x0/0x7b [ 0.647521] [<ffffffff8021296f>] ? child_rip+0x0/0x11 [ 0.647521] [ 0.647521] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.672032] initcall ftrace_dynamic_init+0x0/0xd6 returned 0 after 19 msecs also mark it no-kprobes while at it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13Merge branches 'oprofile-v2' and 'timers/hpet' into x86/core-v4Ingo Molnar
2008-10-13Merge branch 'linus' into oprofile-v2Ingo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/oprofile/nmi_int.c include/linux/pci_ids.h
2008-10-13dumpstack: x86: various small unification steps, fixAlexander van Heukelum
After "dumpstack: x86: various small unification steps", the assembler gives the following compile error. The error is in dumpstack_64.c. {standard input}: Assembler messages: {standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix {standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix Indeed the suffix in get_bp() was wrong. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: remove additional_cpusThomas Gleixner
remove remainder of additional_cpus logic. We now just listen to the disabled_cpus value like we did for years. disabled_cpus is always >= 0 so no need for an extra check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: remove additional_cpus configurabilityIngo Molnar
additional_cpus=<x> parameter is dangerous and broken: for example if we boot additional_cpus=-2 on a stock dual-core system it will crash the box on bootup. So reduce the maze of code a bit by removingthe user-configurability angle. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: improve UP kernel when CPU-hotplug and SMP is enabledThomas Gleixner
num_possible_cpus() can be > 1 when disabled CPUs have been accounted. Disabled CPUs are not in the cpu_present_map, so we can use num_present_cpus() as a safe indicator to switch to UP alternatives. Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: various small unification stepsAlexander van Heukelum
- define STACKSLOTS_PER_LINE and use it - define get_bp macro to hide the %%ebp/%%rbp difference - i386: check task==NULL in dump_trace, like x86_64 - i386: show_trace(NULL, ...) uses current automatically - x86_64: use [#%d] for die_counter, like i386 - whitespace and comments Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: i386: make kstack= an early boot-param and add oops=panicAlexander van Heukelum
- make kstack= and early_param - add oops=panic, setting panic_on_oops Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: use log_lvl and unify trace formattingAlexander van Heukelum
- x86: Write log_lvl strings if available - start raw stack dumps on new line - i386: Remove extra indentation for raw stack dumps Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumptrace: x86: consistently include loglevel, print stack switchAlexander van Heukelum
- i386 and x86_64: always printk the 'data' parameter - i386: announce stack switch (irq -> normal) - i386: check if there is a stack switch before announcing it There is a warning that 'context' might come out corrupt in early boot. If this is true it should be fixed, not worked around. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stackAlexander van Heukelum
- Add "end" parameter to valid_stack_ptr and print_context_stack - use sizeof(long) as the size of a word on the stack Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: make printk_address equalAlexander van Heukelum
- x86_64: use %p to print an address - make i386-version the same as the above The result should be the same on x86_64; on i386 the output only changes if CONFIG_KALLSYMS is turned off, in which case the address is printed twice. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: move die_nmi to dumpstack_32.cAlexander van Heukelum
For some reason die_nmi is still defined in traps.c for i386, but is found in dumpstack_64.c for x86_64. Move it to dumpstack_32.c Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86: finalize unification of traps.cAlexander van Heukelum
traps_32.c and traps_64.c are now equal. Move one to traps.c, delete the other one and change the Makefile Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86: make traps_32.c and traps_64.c equalAlexander van Heukelum
Use CONFIG_X86_64/CONFIG_X86_32 to condtionally compile the parts needed for x86_64 or i386 only. Runs a small userspace for a number of minimal configurations and boots the defconfigs. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86: various noop-changes preparing for unification of traps_xx.cAlexander van Heukelum
- reordering include files - whitespace changes - comment changes - removed unused bad_intr() - make default_do_nmi static Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protectionAlexander van Heukelum
Use task_pid_nr(tsk) instead of tsk->pid in do_general_protection. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: i386: expand clear_mem_error and remove from mach_traps.hAlexander van Heukelum
This is the last user of clear_mem_error, which is defined only on i386. Expand the inline function and remove it from include/asm-x86/mach-default/mach_traps.h Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86_64: make io_check_error equal to the one on i386Alexander van Heukelum
Make io_check_error equal to the one on i386. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: i386: use preempt_conditional_sti/cli in do_int3Alexander van Heukelum
Use preempt_conditional_sti/cli in do_int3, like on x86_64. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86_64: make math_state_restore more like i386Alexander van Heukelum
- rename variable me -> tsk - get thread and tsk like i386 - expand used_math() - copy comment Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13traps: x86: converge trap_init functionsAlexander van Heukelum
- set_system_gate on i386 is really set_system_trap_gate - set_system_gate on x86_64 is really set_system_intr_gate - ist=0 means no special stack switch is done: - introduce STACKFAULT_STACK, DOUBLEFAULT_STACK, NMI_STACK, DEBUG_STACK and MCE_STACK as on x86_64. - use the _ist variants with XXX_STACK set to zero - remove set_system_gate Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> traps: x86: correct copy/paste bug: a trap is a GATE_TRAP Fix copy/paste/forgot-to-edit bug in desc.h. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86, traps: converge do_debug handlersAlexander van Heukelum
Make the x86_64-version and the i386-version of do_debug more similar. - introduce preempt_conditional_sti/cli to i386. The preempt-count is now elevated during the trap handler, like on x86_64. It does not run on a separate stack, however. - replace an open-coded "send_sigtrap" - copy some comments Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86, traps: introduce dotraplinkageAlexander van Heukelum
Mark the exception handlers with "dotraplinkage" to hide the calling convention differences between i386 and x86_64. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86, traps, i386: factor out lazy io-bitmap copyAlexander van Heukelum
x86_64 does not do the lazy io-bitmap dance. Putting it in its own function makes i386's do_general_protection look much more like x86_64's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86, traps: split out math_error and simd_math_errorAlexander van Heukelum
Split out math_error from do_coprocessor_error and simd_math_error from do_simd_coprocessor_error, like on i386. While at it, add the "error_code" parameter to do_coprocessor_error, do_simd_coprocessor_error and do_spurious_interrupt_bug. This does not change the generated code, but brings the declarations in line with all the other trap handlers. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86_64: split out dumpstack code from traps_64.cAlexander van Heukelum
The dumpstack code is logically quite independent from the hardware traps. Split it out into its own file. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 23:39:13 +0000