aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm/vmx.c
AgeCommit message (Collapse)Author
2008-10-15KVM: Consolidate XX_VECTOR definesJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: Remove redundant check in handle_rmode_exceptionMohammed Gamal
Since checking for vcpu->arch.rmode.active is already done whenever we call handle_rmode_exception(), checking it inside the function is redundant. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: Move interrupt post-processing to vmx_complete_interrupts()Avi Kivity
Instead of looking at failed injections in the vm entry path, move processing to the exit path in vmx_complete_interrupts(). This simplifes the logic and removes any state that is hidden in vmx registers. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: Fix pending exception processingAvi Kivity
The vmx code assumes that IDT-Vectoring can only be set when an exception is injected due to the exception in question. That's not true, however: if the exception is injected correctly, and later another exception occurs but its delivery is blocked due to a fault, then we will incorrectly assume the first exception was not delivered. Fix by unconditionally dequeuing the pending exception, and requeuing it (or the second exception) if we see it in the IDT-Vectoring field. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: Move nmi injection failure processing to vm exit pathAvi Kivity
Instead of processing nmi injection failure in the vm entry path, move it to the vm exit path (vm_complete_interrupts()). This separates nmi injection from nmi post-processing, and moves the nmi state from the VT state into vcpu state (new variable nmi_injected specifying an injection in progress). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: Move NMI IRET fault processing to new vmx_complete_interrupts()Avi Kivity
Currently most interrupt exit processing is handled on the entry path, which is confusing. Move the NMI IRET fault processing to a new function, vmx_complete_interrupts(), which is called on the vmexit path. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86: accessors for guest registersMarcelo Tosatti
As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: Rename misnamed msr bitsSheng Yang
MSR_IA32_FEATURE_LOCKED is just a bit in fact, which shouldn't be prefixed with MSR_. So is MSR_IA32_FEATURE_VMXON_ENABLED. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-09-11KVM: VMX: Always return old for clear_flush_young() when using EPTSheng Yang
As well as discard fake accessed bit and dirty bit of EPT. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: VMX: Fix undefined beaviour of EPT after reload kvm-intel.koSheng Yang
As well as move set base/mask ptes to vmx_init(). Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: VMX: Fix bypass_guest_pf enabling when disable EPT in module parameterSheng Yang
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: Avoid instruction emulation when event delivery is pendingAvi Kivity
When an event (such as an interrupt) is injected, and the stack is shadowed (and therefore write protected), the guest will exit. The current code will see that the stack is shadowed and emulate a few instructions, each time postponing the injection. Eventually the injection may succeed, but at that time the guest may be unwilling to accept the interrupt (for example, the TPR may have changed). This occurs every once in a while during a Windows 2008 boot. Fix by unshadowing the fault address if the fault was due to an event injection. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Prefix some x86 low level function with kvm_, to avoid namespace issuesAvi Kivity
Fixes compilation with CONFIG_VMI enabled. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Add ept_sync_context in flush_tlbSheng Yang
Fix a potention issue caused by kvm_mmu_slot_remove_write_access(). The old behavior don't sync EPT TLB with modified EPT entry, which result in inconsistent content of EPT TLB and EPT table. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Fake emulate Intel perfctr MSRsChris Lalancette
Older linux guests (in this case, 2.6.9) can attempt to access the performance counter MSRs without a fixup section, and injecting a GPF kills the guest. Work around by allowing the guest to write those MSRs. Tested by me on RHEL-4 i386 and x86_64 guests, as well as F-9 guests. Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Fix a wrong usage of vmcs_configSheng Yang
The function ept_update_paging_mode_cr0() write to CPU_BASED_VM_EXEC_CONTROL based on vmcs_config.cpu_based_exec_ctrl. That's wrong because the variable may not consistent with the content in the CPU_BASE_VM_EXEC_CONTROL MSR. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Enable NMI with in-kernel irqchipSheng Yang
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Remove decache_vcpus_on_cpu() and related callbacksAvi Kivity
Obsoleted by the vmx-specific per-cpu list. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Add list of potentially locally cached vcpusAvi Kivity
VMX hardware can cache the contents of a vcpu's vmcs. This cache needs to be flushed when migrating a vcpu to another cpu, or (which is the case that interests us here) when disabling hardware virtualization on a cpu. The current implementation of decaching iterates over the list of all vcpus, picks the ones that are potentially cached on the cpu that is being offlined, and flushes the cache. The problem is that it uses mutex_trylock() to gain exclusive access to the vcpu, which fires off a (benign) warning about using the mutex in an interrupt context. To avoid this, and to make things generally nicer, add a new per-cpu list of potentially cached vcus. This makes the decaching code much simpler. The list is vmx-specific since other hardware doesn't have this issue. [andrea: fix crash on suspend/resume] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Handle virtualization instruction #UD faults during rebootAvi Kivity
KVM turns off hardware virtualization extensions during reboot, in order to disassociate the memory used by the virtualization extensions from the processor, and in order to have the system in a consistent state. Unfortunately virtual machines may still be running while this goes on, and once virtualization extensions are turned off, any virtulization instruction will #UD on execution. Fix by adding an exception handler to virtualization instructions; if we get an exception during reboot, we simply spin waiting for the reset to complete. If it's a true exception, BUG() so we can have our stack trace. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: Trivial vmcs_write64() code simplificationAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: VMX: move APIC_ACCESS trace entry to generic codeJoerg Roedel
This patch moves the trace entry for APIC accesses from the VMX code to the generic lapic code. This way APIC accesses from SVM will also be traced. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: add statics were possible, function definition in lapic.hHarvey Harrison
Noticed by sparse: arch/x86/kvm/vmx.c:1583:6: warning: symbol 'vmx_disable_intercept_for_msr' was not declared. Should it be static? arch/x86/kvm/x86.c:3406:5: warning: symbol 'kvm_task_switch_16' was not declared. Should it be static? arch/x86/kvm/x86.c:3429:5: warning: symbol 'kvm_task_switch_32' was not declared. Should it be static? arch/x86/kvm/mmu.c:1968:6: warning: symbol 'kvm_mmu_remove_one_alloc_mmu_page' was not declared. Should it be static? arch/x86/kvm/mmu.c:2014:6: warning: symbol 'mmu_destroy_caches' was not declared. Should it be static? arch/x86/kvm/lapic.c:862:5: warning: symbol 'kvm_lapic_get_base' was not declared. Should it be static? arch/x86/kvm/i8254.c:94:5: warning: symbol 'pit_get_gate' was not declared. Should it be static? arch/x86/kvm/i8254.c:196:5: warning: symbol '__pit_timer_fn' was not declared. Should it be static? arch/x86/kvm/i8254.c:561:6: warning: symbol '__inject_pit_timer_intr' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-26on_each_cpu(): kill unused 'retry' parameterJens Axboe
It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26smp_call_function: get rid of the unused nonatomic/retry argumentJens Axboe
It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-24KVM: VMX: Fix host msr corruption with preemption enabledAvi Kivity
Switching msrs can occur either synchronously as a result of calls to the msr management functions (usually in response to the guest touching virtualized msrs), or asynchronously when preempting a kvm thread that has guest state loaded. If we're unlucky enough to have the two at the same time, host msrs are corrupted and the machine goes kaput on the next syscall. Most easily triggered by Windows Server 2008, as it does a lot of msr switching during bootup. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06KVM: VMX: Clear CR4.VMXE in hardware_disableEli Collins
Clear CR4.VMXE in hardware_disable. There's no reason to leave it set after doing a VMXOFF. VMware Workstation 6.5 checks CR4.VMXE as a proxy for whether the CPU is in VMX mode, so leaving VMXE set means we'll refuse to power on. With this change the user can power on after unloading the kvm-intel module. I tested on kvm-67 and kvm-69. Signed-off-by: Eli Collins <ecollins@vmware.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06KVM: migrate PIT timerMarcelo Tosatti
Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on, similarly to what is done for the LAPIC timers, otherwise PIT interrupts will be delayed until an unrelated event causes an exit. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: VMX: Enable EPT feature for KVMSheng Yang
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: VMX: Prepare an identity page table for EPT in real modeSheng Yang
[aliguory: plug leak] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: Add kvm_x86_ops get_tdp_level()Sheng Yang
The function get_tdp_level() provided the number of tdp level for EPT and NPT rather than the NPT specific macro. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: VMX: EPT Feature DetectionSheng Yang
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Add trace markersFeng (Eric) Liu
Trace markers allow userspace to trace execution of a virtual machine in order to monitor its performance. Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: unify slots_lock usageMarcelo Tosatti
Unify slots_lock acquision around vcpu_run(). This is simpler and less error-prone. Also fix some callsites that were not grabbing the lock properly. [avi: drop slots_lock while in guest mode to avoid holding the lock for indefinite periods] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Enable MSR Bitmap featureSheng Yang
MSR Bitmap controls whether the accessing of an MSR causes VM Exit. Eliminating exits on automatically saved and restored MSRs yields a small performance gain. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86: hardware task switching supportIzik Eidus
This emulates the x86 hardware task switch mechanism in software, as it is unsupported by either vmx or svm. It allows operating systems which use it, like freedos, to run as kvm guests. Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86: add functions to get the cpl of vcpuIzik Eidus
Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Add module option to disable flexpriorityAvi Kivity
Useful for debugging. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Don't adjust tsc offset forwardAvi Kivity
Most Intel hosts have a stable tsc, and playing with the offset only reduces accuracy. By limiting tsc offset adjustment only to forward updates, we effectively disable tsc offset adjustment on these hosts. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: replace remaining __FUNCTION__ occurancesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Prefix control register accessors with kvm_ to avoid namespace pollutionAvi Kivity
Names like 'set_cr3()' look dangerously close to affecting the host. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Use x86's segment descriptor struct instead of private definitionAvi Kivity
The x86 desc_struct unification allows us to remove segment_descriptor.h. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: fix typo in VMX header defineRyan Harper
Looking at Intel Volume 3b, page 148, table 20-11 and noticed that the field name is 'Deliver' not 'Deliever'. Attached patch changes the define name and its user in vmx.c Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: unifdef the EFER specific codeJoerg Roedel
To allow access to the EFER register in 32bit KVM the EFER specific code has to be exported to the x86 generic code. This patch does this in a backwards compatible manner. [avi: add check for EFER-less hosts] Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: align valid EFER bits with the features of the host systemJoerg Roedel
This patch aligns the bits the guest can set in the EFER register with the features in the host processor. Currently it lets EFER.NX disabled if the processor does not support it and enables EFER.LME and EFER.LMA only for KVM on 64 bit hosts. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Enable Virtual Processor Identification (VPID)Sheng Yang
To allow TLB entries to be retained across VM entry and VM exit, the VMM can now identify distinct address spaces through a new virtual-processor ID (VPID) field of the VMCS. [avi: drop vpid_sync_all()] [avi: add "cc" to asm constraints] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: convert init_rmode_tss() to slots_lockMarcelo Tosatti
init_rmode_tss was forgotten during the conversion from mmap_sem to slots_lock. INFO: task qemu-system-x86:3748 blocked for more than 120 seconds. Call Trace: [<ffffffff8053d100>] __down_read+0x86/0x9e [<ffffffff8053fb43>] do_page_fault+0x346/0x78e [<ffffffff8053d235>] trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8053dcad>] error_exit+0x0/0xa9 [<ffffffff8035a7a7>] copy_user_generic_string+0x17/0x40 [<ffffffff88099a8a>] :kvm:kvm_write_guest_page+0x3e/0x5f [<ffffffff880b661a>] :kvm_intel:init_rmode_tss+0xa7/0xf9 [<ffffffff880b7d7e>] :kvm_intel:vmx_vcpu_reset+0x10/0x38a [<ffffffff8809b9a5>] :kvm:kvm_arch_vcpu_setup+0x20/0x53 [<ffffffff8809a1e4>] :kvm:kvm_vm_ioctl+0xad/0x1cf [<ffffffff80249dea>] __lock_acquire+0x4f7/0xc28 [<ffffffff8028fad9>] vfs_ioctl+0x21/0x6b [<ffffffff8028fd75>] do_vfs_ioctl+0x252/0x26b [<ffffffff8028fdca>] sys_ioctl+0x3c/0x5e [<ffffffff8020b01b>] system_call_after_swapgs+0x7b/0x80 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: Restore tss even on x86_64Avi Kivity
The vmx hardware state restore restores the tss selector and base address, but not its length. Usually, this does not matter since most of the tss contents is within the default length of 0x67. However, if a process is using ioperm() to grant itself I/O port permissions, an additional bitmap within the tss, but outside the default length is consulted. The effect is that the process will receive a SIGSEGV instead of transparently accessing the port. Fix by restoring the tss length. Note that i386 had this working already. Closes bugzilla 10246. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-04KVM: VMX: Avoid rearranging switched guest msrs while they are loadedAvi Kivity
KVM tries to run as much as possible with the guest msrs loaded instead of host msrs, since switching msrs is very expensive. It also tries to minimize the number of msrs switched according to the guest mode; for example, MSR_LSTAR is needed only by long mode guests. This optimization is done by setup_msrs(). However, we must not change which msrs are switched while we are running with guest msr state: - switch to guest msr state - call setup_msrs(), removing some msrs from the list - switch to host msr state, leaving a few guest msrs loaded An easy way to trigger this is to kexec an x86_64 linux guest. Early during setup, the guest will switch EFER to not include SCE. KVM will stop saving MSR_LSTAR, and on the next msr switch it will leave the guest LSTAR loaded. The next host syscall will end up in a random location in the kernel. Fix by reloading the host msrs before changing the msr list. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-04KVM: move alloc_apic_access_page() outside of non-preemptable regionMarcelo Tosatti
alloc_apic_access_page() can sleep, while vmx_vcpu_setup is called inside a non preemptable region. Move it after put_cpu(). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>