aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm/x86_emulate.c
AgeCommit message (Collapse)Author
2008-12-31KVM: x86 emulator: Fix handling of VMMCALL instructionAmit Shah
The VMMCALL instruction doesn't get recognised and isn't processed by the emulator. This is seen on an Intel host that tries to execute the VMMCALL instruction after a guest live migrates from an AMD host. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add the emulation of shld and shrd instructionsGuillaume Thouvenin
Add emulation of shld and shrd instructions Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add the assembler code for three operandsGuillaume Thouvenin
Add the assembler code for instruction with three operands and one operand is stored in ECX register Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add a new "implied 1" Src decode typeGuillaume Thouvenin
Add SrcOne operand type when we need to decode an implied '1' like with regular shift instruction Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add Src2 decode setGuillaume Thouvenin
Instruction like shld has three operands, so we need to add a Src2 decode set. We start with Src2None, Src2CL, and Src2ImmByte, Src2One to support shld/shrd and we will expand it later. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Extend the opcode descriptorGuillaume Thouvenin
Extend the opcode descriptor to 32 bits. This is needed by the introduction of a new Src2 operand type. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: Remove extraneous semicolon after do/whileAvi Kivity
Notices by Guillaume Thouvenin. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: fix popf emulationAvi Kivity
Set operand type and size to get correct writeback behavior. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: fix ret emulationAvi Kivity
'ret' did not set the operand type or size for the destination, so writeback ignored it. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: switch 'pop reg' instruction to emulate_pop()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: allow pop from mmioAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Extract 'pop' sequence into a functionAvi Kivity
Switch 'pop r/m' instruction to use the new function. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: consolidate emulation of two operand instructionsAvi Kivity
No need to repeat the same assembly block over and over. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: reduce duplication in one operand emulation thunksAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: allow emulator to adjust rip for emulated pio instructionsGuillaume Thouvenin
If we call the emulator we shouldn't call skip_emulated_instruction() in the first place, since the emulator already computes the next rip for us. Thus we move ->skip_emulated_instruction() out of kvm_emulate_pio() and into handle_io() (and the svm equivalent). We also replaced "return 0" by "break" in the "do_io:" case because now the shadow register state needs to be committed. Otherwise eip will never be updated. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Add decode entries for 0x04 and 0x05 opcodes (add acc, imm)Guillaume Thouvenin
Add decode entries for 0x04 and 0x05 (ADD) opcodes, execution is already implemented. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: consolidate push regGuillaume Thouvenin
This patch consolidate the emulation of push reg instruction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15KVM: x86 emulator: Use DstAcc for 'and'Guillaume Thouvenin
For instruction 'and al,imm' we use DstAcc instead of doing the emulation directly into the instruction's opcode. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add cmp al, imm and cmp ax, imm instructions (ocodes 3c, 3d)Guillaume Thouvenin
Add decode entries for these opcodes; execution is already implemented. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add DstAcc operand typeGuillaume Thouvenin
Add DstAcc operand type. That means that there are 4 bits now for DstMask. "In the good old days cpus would have only one register that was able to fully participate in arithmetic operations, typically called A for Accumulator. The x86 retains this tradition by having special, shorter encodings for the A register (like the cmp opcode), and even some instructions that only operate on A (like mul). SrcAcc and DstAcc would accommodate these instructions by decoding A into the corresponding 'struct operand'." -- Avi Kivity Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: fix jmp r/m64 instructionAvi Kivity
jmp r/m64 doesn't require the rex.w prefix to indicate the operand size is 64 bits. Set the Stack attribute (even though it doesn't involve the stack, really) to indicate this. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add call near absolute instruction (opcode 0xff/2)Mohammed Gamal
Add call near absolute instruction. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add in/out instructions (opcodes 0xe4-0xe7, 0xec-0xef)Mohammed Gamal
The patch adds in/out instructions to the x86 emulator. The instruction was encountered while running the BIOS while using the invalid guest state emulation patch. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add std and cld instructions (opcodes 0xfc-0xfd)Mohammed Gamal
This adds the std and cld instructions to the emulator. Encountered while running the BIOS with invalid guest state emulation enabled. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: Add mov r, imm instructions (opcodes 0xb0-0xbf)Mohammed Gamal
The emulator only supported one instance of mov r, imm instruction (opcode 0xb8), this adds the rest of these instructions. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: remove bad ByteOp specifier from NEG descriptorAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86 emulator: remove duplicate SrcImmroel kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: x86: accessors for guest registersMarcelo Tosatti
As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: emulate clflushGlauber Costa
If the guest issues a clflush in a mmio address, the instruction can trap into the hypervisor. Currently, we do not decode clflush properly, causing the guest to hang. This patch fixes this emulating clflush (opcode 0f ae). Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Fix HLT instructionMohammed Gamal
This patch fixes issue encountered with HLT instruction under FreeDOS's HIMEM XMS Driver. The HLT instruction jumped directly to the done label and skips updating the EIP value, therefore causing the guest to spin endlessly on the same instruction. The patch changes the instruction so that it writes back the updated EIP value. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: lazily evaluate segment registersAvi Kivity
Instead of prefetching all segment bases before emulation, read them at the last moment. Since most of them are unneeded, we save some cycles on Intel machines where this is a bit expensive. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: avoid segment base adjust for leaAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify rip relative decodingAvi Kivity
rip relative decoding is relative to the instruction pointer of the next instruction; by moving address adjustment until after decoding is complete, we remove the need to determine the instruction size. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify r/m decodingAvi Kivity
Consolidate the duplicated code when not in any special case. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify sib decodingAvi Kivity
Instead of using sparse switches, use simpler if/else sequences. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: handle undecoded rex.b with r/m = 5 in certain casesAvi Kivity
x86_64 does not decode rex.b in certain cases, where the r/m field = 5. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: emulate nop and xchg reg, acc (opcodes 0x90 - 0x97)Mohammed Gamal
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: implement 'push imm' (opcode 0x68)Avi Kivity
Encountered in FC6 boot sequence, now that we don't force ss.rpl = 0 during the protected mode transition. Not really necessary, but nice to have. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify push imm8 emulationAvi Kivity
Instead of fetching the data explicitly, use SrcImmByte. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Add support for mov r, sreg (0x8c) instructionGuillaume Thouvenin
Add support for mov r, sreg (0x8c) instruction Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Add support for mov seg, r (0x8e) instructionGuillaume Thouvenin
Add support for mov r, sreg (0x8c) instruction. [avi: drop the sreg decoding table in favor of 1:1 encoding] Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: adds support to mov r,imm (opcode 0xb8) instructionGuillaume Thouvenin
Add support to mov r, imm (0xb8) instruction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: add support for jmp far 0xeaGuillaume Thouvenin
Add support for jmp far (opcode 0xea) instruction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Update c->dst.bytes in decode instructionGuillaume Thouvenin
Update c->dst.bytes in decode instruction instead of instruction itself. It's needed because if c->dst.bytes is equal to 0, the instruction is not emulated. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06KVM: x86 emulator: fix hypercall return value on AMDAvi Kivity
The hypercall instructions on Intel and AMD are different. KVM allows the guest to choose one or the other (the default is Intel), and if the guest chooses incorrectly, KVM will patch it at runtime to select the correct instruction. This allows live migration between Intel and AMD machines. This patching occurs in the x86 emulator. The current code also executes the hypercall. Unfortunately, the tail end of the x86 emulator code also executes, overwriting the return value of the hypercall with the original contents of rax (which happens to be the hypercall number). Fix not by executing the hypercall in the emulator context; instead let the guest reissue the patched instruction and execute the hypercall via the normal path. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-18KVM: x86 emulator: fix writes to registers with modrm encodingsAvi Kivity
A register destination encoded with a mod=3 encoding left dst.ptr NULL. Normally we don't trap writes to registers, but in the case of smsw, we do. Fix by pointing dst.ptr at the destination register. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: x86 emulator: disable writeback on lmswAvi Kivity
The recent changes allowing memory operands with lmsw and smsw left lmsw with writeback enabled. Since lmsw has no oridinary destination operand, the dst pointer was not initialized, resulting in an oops. Close the hole by disabling writeback for lmsw. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: fix lea to really get the effective addressAvi Kivity
We never hit this, since there is currently no reason to emulate lea. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: fix smsw and lmsw with a memory operandAvi Kivity
lmsw and smsw were implemented only with a register operand. Extend them to support a memory operand as well. Fixes Windows running some display compatibility test on AMD hosts. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: initialize src.val and dst.val for register operandsAvi Kivity
This lets us treat the case where mod == 3 in the same manner as other cases. Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 00:04:12 +0000