aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm/x86_emulate.c
AgeCommit message (Collapse)Author
2008-07-20KVM: x86 emulator: emulate clflushGlauber Costa
If the guest issues a clflush in a mmio address, the instruction can trap into the hypervisor. Currently, we do not decode clflush properly, causing the guest to hang. This patch fixes this emulating clflush (opcode 0f ae). Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Fix HLT instructionMohammed Gamal
This patch fixes issue encountered with HLT instruction under FreeDOS's HIMEM XMS Driver. The HLT instruction jumped directly to the done label and skips updating the EIP value, therefore causing the guest to spin endlessly on the same instruction. The patch changes the instruction so that it writes back the updated EIP value. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: lazily evaluate segment registersAvi Kivity
Instead of prefetching all segment bases before emulation, read them at the last moment. Since most of them are unneeded, we save some cycles on Intel machines where this is a bit expensive. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: avoid segment base adjust for leaAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify rip relative decodingAvi Kivity
rip relative decoding is relative to the instruction pointer of the next instruction; by moving address adjustment until after decoding is complete, we remove the need to determine the instruction size. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify r/m decodingAvi Kivity
Consolidate the duplicated code when not in any special case. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify sib decodingAvi Kivity
Instead of using sparse switches, use simpler if/else sequences. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: handle undecoded rex.b with r/m = 5 in certain casesAvi Kivity
x86_64 does not decode rex.b in certain cases, where the r/m field = 5. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: emulate nop and xchg reg, acc (opcodes 0x90 - 0x97)Mohammed Gamal
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: implement 'push imm' (opcode 0x68)Avi Kivity
Encountered in FC6 boot sequence, now that we don't force ss.rpl = 0 during the protected mode transition. Not really necessary, but nice to have. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: simplify push imm8 emulationAvi Kivity
Instead of fetching the data explicitly, use SrcImmByte. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Add support for mov r, sreg (0x8c) instructionGuillaume Thouvenin
Add support for mov r, sreg (0x8c) instruction Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Add support for mov seg, r (0x8e) instructionGuillaume Thouvenin
Add support for mov r, sreg (0x8c) instruction. [avi: drop the sreg decoding table in favor of 1:1 encoding] Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: adds support to mov r,imm (opcode 0xb8) instructionGuillaume Thouvenin
Add support to mov r, imm (0xb8) instruction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: add support for jmp far 0xeaGuillaume Thouvenin
Add support for jmp far (opcode 0xea) instruction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: x86 emulator: Update c->dst.bytes in decode instructionGuillaume Thouvenin
Update c->dst.bytes in decode instruction instead of instruction itself. It's needed because if c->dst.bytes is equal to 0, the instruction is not emulated. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06KVM: x86 emulator: fix hypercall return value on AMDAvi Kivity
The hypercall instructions on Intel and AMD are different. KVM allows the guest to choose one or the other (the default is Intel), and if the guest chooses incorrectly, KVM will patch it at runtime to select the correct instruction. This allows live migration between Intel and AMD machines. This patching occurs in the x86 emulator. The current code also executes the hypercall. Unfortunately, the tail end of the x86 emulator code also executes, overwriting the return value of the hypercall with the original contents of rax (which happens to be the hypercall number). Fix not by executing the hypercall in the emulator context; instead let the guest reissue the patched instruction and execute the hypercall via the normal path. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-18KVM: x86 emulator: fix writes to registers with modrm encodingsAvi Kivity
A register destination encoded with a mod=3 encoding left dst.ptr NULL. Normally we don't trap writes to registers, but in the case of smsw, we do. Fix by pointing dst.ptr at the destination register. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04KVM: x86 emulator: disable writeback on lmswAvi Kivity
The recent changes allowing memory operands with lmsw and smsw left lmsw with writeback enabled. Since lmsw has no oridinary destination operand, the dst pointer was not initialized, resulting in an oops. Close the hole by disabling writeback for lmsw. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: fix lea to really get the effective addressAvi Kivity
We never hit this, since there is currently no reason to emulate lea. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: fix smsw and lmsw with a memory operandAvi Kivity
lmsw and smsw were implemented only with a register operand. Extend them to support a memory operand as well. Fixes Windows running some display compatibility test on AMD hosts. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: initialize src.val and dst.val for register operandsAvi Kivity
This lets us treat the case where mod == 3 in the same manner as other cases. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: fix sparse warnings in x86_emulate.cHarvey Harrison
Nesting __emulate_2op_nobyte inside__emulate_2op produces many shadowed variable warnings on the internal variable _tmp used by both macros. Change the outer macro to use __tmp. Avoids a sparse warning like the following at every call site of __emulate_2op arch/x86/kvm/x86_emulate.c:1091:3: warning: symbol '_tmp' shadows an earlier one arch/x86/kvm/x86_emulate.c:1091:3: originally declared here [18 more warnings suppressed] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: make register_address_increment and JMP_REL static inlinesHarvey Harrison
Change jmp_rel() to a function as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: make register_address, address_mask static inlinesHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add ad_mask static inlineHarvey Harrison
Replaces open-coded mask calculation in macros. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: group decoding for group 1 instructionsAvi Kivity
Opcodes 0x80-0x83 Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add group 7 decodingAvi Kivity
This adds group decoding for opcode 0x0f 0x01 (group 7). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: Group decoding for groups 4 and 5Avi Kivity
Add group decoding support for opcode 0xfe (group 4) and 0xff (group 5). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: Group decoding for group 3Avi Kivity
This adds group decoding support for opcodes 0xf6, 0xf7 (group 3). Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: group decoding for group 1AAvi Kivity
This adds group decode support for opcode 0x8f. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: x86 emulator: add support for group decodingAvi Kivity
Certain x86 instructions use bits 3:5 of the byte following the opcode as an opcode extension, with the decode sometimes depending on bits 6:7 as well. Add support for this in the main decoding table rather than an ad-hock adaptation per opcode. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: Move arch dependent files to new directory arch/x86/kvm/Avi Kivity
This paves the way for multiple architecture support. Note that while ioapic.c could potentially be shared with ia64, it is also moved. Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 17:43:38 +0000