aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/xen
AgeCommit message (Collapse)Author
2008-11-07Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, xen: fix use of pgd_page now that it really does return a page
2008-11-07xen: make sure stray alias mappings are gone before pinningJeremy Fitzhardinge
Xen requires that all mappings of pagetable pages are read-only, so that they can't be updated illegally. As a result, if a page is being turned into a pagetable page, we need to make sure all its mappings are RO. If the page had been used for ioremap or vmalloc, it may still have left over mappings as a result of not having been lazily unmapped. This change makes sure we explicitly mop them all up before pinning the page. Unlike aliases created by kmap, the there can be vmalloc aliases even for non-high pages, so we must do the flush unconditionally. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Linux Memory Management List <linux-mm@kvack.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06x86, xen: fix use of pgd_page now that it really does return a pageJeremy Fitzhardinge
Impact: fix 32-bit Xen guest boot crash On 32-bit PAE, pud_page, for no good reason, didn't really return a struct page *. Since Jan Beulich's fix "i386/PAE: fix pud_page()", pud_page does return a struct page *. Because PAE has 3 pagetable levels, the pud level is folded into the pgd level, so pgd_page() is the same as pud_page(), and now returns a struct page *. Update the xen/mmu.c code which uses pgd_page() accordingly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) ftrace: fix current_tracer error return tracing: fix a build error on alpha ftrace: use a real variable for ftrace_nop in x86 tracing/ftrace: make boot tracer select the sched_switch tracer tracepoint: check if the probe has been registered asm-generic: define DIE_OOPS in asm-generic trace: fix printk warning for u64 ftrace: warning in kernel/trace/ftrace.c ftrace: fix build failure ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file ftrace: remove ftrace hash ftrace: remove mcount set ftrace: remove daemon ftrace: disable dynamic ftrace for all archs that use daemon ftrace: add ftrace warn on to disable ftrace ftrace: only have ftrace_kill atomic ftrace: use probe_kernel ftrace: comment arch ftrace code ftrace: return error on failed modified text. ftrace: dynamic ftrace process only text section ...
2008-10-27xen: fix Xen domU boot with batched mprotectChris Lalancette
Impact: fix guest kernel boot crash on certain configs Recent i686 2.6.27 kernels with a certain amount of memory (between 736 and 855MB) have a problem booting under a hypervisor that supports batched mprotect (this includes the RHEL-5 Xen hypervisor as well as any 3.3 or later Xen hypervisor). The problem ends up being that xen_ptep_modify_prot_commit() is using virt_to_machine to calculate which pfn to update. However, this only works for pages that are in the p2m list, and the pages coming from change_pte_range() in mm/mprotect.c are kmap_atomic pages. Because of this, we can run into the situation where the lookup in the p2m table returns an INVALID_MFN, which we then try to pass to the hypervisor, which then (correctly) denies the request to a totally bogus pfn. The right thing to do is to use arbitrary_virt_to_machine, so that we can be sure we are modifying the right pfn. This unfortunately introduces a performance penalty because of a full page-table-walk, but we can avoid that penalty for pages in the p2m list by checking if virt_addr_valid is true, and if so, just doing the lookup in the p2m table. The attached patch implements this, and allows my 2.6.27 i686 based guest with 768MB of memory to boot on a RHEL-5 hypervisor again. Thanks to Jeremy for the suggestions about how to fix this particular issue. Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22Merge branch 'tracing/ftrace' into tracing/urgentIngo Molnar
2008-10-20Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20mm: rewrite vmap layerNick Piggin
Rewrite the vmap allocator to use rbtrees and lazy tlb flushing, and provide a fast, scalable percpu frontend for small vmaps (requires a slightly different API, though). The biggest problem with vmap is actually vunmap. Presently this requires a global kernel TLB flush, which on most architectures is a broadcast IPI to all CPUs to flush the cache. This is all done under a global lock. As the number of CPUs increases, so will the number of vunmaps a scaled workload will want to perform, and so will the cost of a global TLB flush. This gives terrible quadratic scalability characteristics. Another problem is that the entire vmap subsystem works under a single lock. It is a rwlock, but it is actually taken for write in all the fast paths, and the read locking would likely never be run concurrently anyway, so it's just pointless. This is a rewrite of vmap subsystem to solve those problems. The existing vmalloc API is implemented on top of the rewritten subsystem. The TLB flushing problem is solved by using lazy TLB unmapping. vmap addresses do not have to be flushed immediately when they are vunmapped, because the kernel will not reuse them again (would be a use-after-free) until they are reallocated. So the addresses aren't allocated again until a subsequent TLB flush. A single TLB flush then can flush multiple vunmaps from each CPU. XEN and PAT and such do not like deferred TLB flushing because they can't always handle multiple aliasing virtual addresses to a physical address. They now call vm_unmap_aliases() in order to flush any deferred mappings. That call is very expensive (well, actually not a lot more expensive than a single vunmap under the old scheme), however it should be OK if not called too often. The virtual memory extent information is stored in an rbtree rather than a linked list to improve the algorithmic scalability. There is a per-CPU allocator for small vmaps, which amortizes or avoids global locking. To use the per-CPU interface, the vm_map_ram / vm_unmap_ram interfaces must be used in place of vmap and vunmap. Vmalloc does not use these interfaces at the moment, so it will not be quite so scalable (although it will use lazy TLB flushing). As a quick test of performance, I ran a test that loops in the kernel, linearly mapping then touching then unmapping 4 pages. Different numbers of tests were run in parallel on an 4 core, 2 socket opteron. Results are in nanoseconds per map+touch+unmap. threads vanilla vmap rewrite 1 14700 2900 2 33600 3000 4 49500 2800 8 70631 2900 So with a 8 cores, the rewritten version is already 25x faster. In a slightly more realistic test (although with an older and less scalable version of the patch), I ripped the not-very-good vunmap batching code out of XFS, and implemented the large buffer mapping with vm_map_ram and vm_unmap_ram... along with a couple of other tricks, I was able to speed up a large directory workload by 20x on a 64 CPU system. I believe vmap/vunmap is actually sped up a lot more than 20x on such a system, but I'm running into other locks now. vmap is pretty well blown off the profiles. Before: 1352059 total 0.1401 798784 _write_lock 8320.6667 <- vmlist_lock 529313 default_idle 1181.5022 15242 smp_call_function 15.8771 <- vmap tlb flushing 2472 __get_vm_area_node 1.9312 <- vmap 1762 remove_vm_area 4.5885 <- vunmap 316 map_vm_area 0.2297 <- vmap 312 kfree 0.1950 300 _spin_lock 3.1250 252 sn_send_IPI_phys 0.4375 <- tlb flushing 238 vmap 0.8264 <- vmap 216 find_lock_page 0.5192 196 find_next_bit 0.3603 136 sn2_send_IPI 0.2024 130 pio_phys_write_mmr 2.0312 118 unmap_kernel_range 0.1229 After: 78406 total 0.0081 40053 default_idle 89.4040 33576 ia64_spinlock_contention 349.7500 1650 _spin_lock 17.1875 319 __reg_op 0.5538 281 _atomic_dec_and_lock 1.0977 153 mutex_unlock 1.5938 123 iget_locked 0.1671 117 xfs_dir_lookup 0.1662 117 dput 0.1406 114 xfs_iget_core 0.0268 92 xfs_da_hashname 0.1917 75 d_alloc 0.0670 68 vmap_page_range 0.0462 <- vmap 58 kmem_cache_alloc 0.0604 57 memset 0.0540 52 rb_next 0.1625 50 __copy_user 0.0208 49 bitmap_find_free_region 0.2188 <- vmap 46 ia64_sn_udelay 0.1106 45 find_inode_fast 0.1406 42 memcmp 0.2188 42 finish_task_switch 0.1094 42 __d_lookup 0.0410 40 radix_tree_lookup_slot 0.1250 37 _spin_unlock_irqrestore 0.3854 36 xfs_bmapi 0.0050 36 kmem_cache_free 0.0256 35 xfs_vn_getattr 0.0322 34 radix_tree_lookup 0.1062 33 __link_path_walk 0.0035 31 xfs_da_do_buf 0.0091 30 _xfs_buf_find 0.0204 28 find_get_page 0.0875 27 xfs_iread 0.0241 27 __strncpy_from_user 0.2812 26 _xfs_buf_initialize 0.0406 24 _xfs_buf_lookup_pages 0.0179 24 vunmap_page_range 0.0250 <- vunmap 23 find_lock_page 0.0799 22 vm_map_ram 0.0087 <- vmap 20 kfree 0.0125 19 put_page 0.0330 18 __kmalloc 0.0176 17 xfs_da_node_lookup_int 0.0086 17 _read_lock 0.0885 17 page_waitqueue 0.0664 vmap has gone from being the top 5 on the profiles and flushing the crap out of all TLBs, to using less than 1% of kernel time. [akpm@linux-foundation.org: cleanups, section fix] [akpm@linux-foundation.org: fix build on alpha] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16genirq: revert dynarrayThomas Gleixner
Revert the dynarray changes. They need more thought and polishing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16xen: Fix bug `do_IRQ: cannot handle IRQ -1 vector 0x6 cpu 1'Alex Nixon
Following commit 9c3f2468d8339866d9ef6a25aae31a8909c6be0d, do_IRQ() looks up the IRQ number in the per-cpu variable vector_irq. This commit makes Xen initialise an identity vector_irq map for both X86_32 and X86_64. Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-15x86: paravirt: factor out cpu_khz to common codeGlauber Costa
KVM intends to use paravirt code to calibrate khz. Xen current code will do just fine. So as a first step, factor out code to pvclock.c. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-12Merge branch 'linus' into x86/xenIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c arch/x86/kernel/process_64.c arch/x86/xen/enlighten.c
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-10-10xen: do not reserve 2 pages of padding between hypervisor and fixmap.Ian Campbell
When reserving space for the hypervisor the Xen paravirt backend adds an extra two pages (this was carried forward from the 2.6.18-xen tree which had them "for safety"). Depending on various CONFIG options this can cause the boot time fixmaps to span multiple PMDs which is not supported and triggers a WARN in early_ioremap_init(). This was exposed by 2216d199b1430d1c0affb1498a9ebdbd9c0de439 which moved the dmi table parsing earlier. x86: fix CONFIG_X86_RESERVE_LOW_64K=y The bad_bios_dmi_table() quirk never triggered because we do DMI setup too late. Move it a bit earlier. There is no real reason to reserve these two extra pages and the fixmap already incorporates FIX_HOLE which serves the same purpose. None of the other callers of reserve_top_address do this. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-09xen: use spin_lock_nest_lock when pinning a pagetableJeremy Fitzhardinge
When pinning/unpinning a pagetable with split pte locks, we can end up holding multiple pte locks at once (we need to hold the locks while there's a pending batched hypercall affecting the pte page). Because all the pte locks are in the same lock class, lockdep thinks that we're potentially taking a lock recursively. This warning is spurious because we always take the pte locks while holding mm->page_table_lock. lockdep now has spin_lock_nest_lock to express this kind of dominant lock use, so use it here so that lockdep knows what's going on. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', ↵Ingo Molnar
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1
2008-10-03xen: clean up x86-64 warningsJeremy Fitzhardinge
There are a couple of Xen features which rely on directly accessing per-cpu data via a segment register, which is not yet available on x86-64. In the meantime, just disable direct access to the vcpu info structure; this leaves some of the code as dead, but it will come to life in time, and the warnings are suppressed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30xen: make CONFIG_XEN_SAVE_RESTORE depend on CONFIG_XENChuck Ebbert
Xen options need to depend on XEN. Also, add newline at end of file. Without this patch you need to disable CONFIG_PM in order to disable CPU hotplugging. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Acked-by Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23Merge branch 'timers/urgent' into x86/xenIngo Molnar
Conflicts: arch/x86/kernel/process_32.c arch/x86/kernel/process_64.c Manual merge: arch/x86/kernel/smpboot.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14xen: fix for xen guest with mem > 3.7GJeremy Fitzhardinge
PFN_PHYS() can truncate large addresses unless its passed a suitable large type. This is fixed more generally in the patch series introducing phys_addr_t, but we need a short-term fix to solve a Xen regression reported by Roberto De Ioris. Reported-by: Roberto De Ioris <roberto@unbit.it> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10xen: fix pinning when not using split pte locksJeremy Fitzhardinge
We only pin PTE pages when using split PTE locks, so don't do the pin/unpin when attaching/detaching pte pages to a pinned pagetable. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10Merge branch 'core/xen' into x86/xenIngo Molnar
2008-09-10mm: define USE_SPLIT_PTLOCKS rather than repeating expressionJeremy Fitzhardinge
Define USE_SPLIT_PTLOCKS as a constant expression rather than repeating "NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS" all over the place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08xen: make CPU hotplug functions staticAlex Nixon
There's no need for these functions to be accessed from outside of xen/smp.c Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08x86, xen: fix build when !CONFIG_HOTPLUG_CPUAlex Nixon
Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flagsEduardo Habkost
Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25xen: implement CPU hotpluggingAlex Nixon
Note the changes from 2.6.18-xen CPU hotplugging: A vcpu_down request from the remote admin via Xenbus both hotunplugs the CPU, and disables it by removing it from the cpu_present map, and removing its entry in /sys. A vcpu_up request from the remote admin only re-enables the CPU, and does not immediately bring the CPU up. A udev event is emitted, which can be caught by the user if he wishes to automatically re-up CPUs when available, or implement a more complex policy. Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: build fix in "xen spinlock updates and performance measurements"Jeremy Fitzhardinge
Ingo Molnar wrote: > -tip testing found this build failure: > > arch/x86/xen/spinlock.c: In function ‘spin_time_start’: > arch/x86/xen/spinlock.c:60: error: implicit declaration of function ‘xen_clocksource_read’ > > i've excluded these new commits for now from tip/master - could you > please send a delta fix against tip/x86/xen? Make xen_clocksource_read non-static. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86, paravirt_ops: use unsigned long instead of u32 for alloc_p*() pfn argsEduardo Habkost
This patch changes the pfn args from 'u32' to 'unsigned long' on alloc_p*() functions on paravirt_ops, and the corresponding implementations for Xen and VMI. The prototypes for CONFIG_PARAVIRT=n are already using unsigned long, so paravirt.h now matches the prototypes on asm-x86/pgalloc.h. It shouldn't result in any changes on generated code on 32-bit, with or without CONFIG_PARAVIRT. On both cases, 'codiff -f' didn't show any change after applying this patch. On 64-bit, there are (expected) binary changes only when CONFIG_PARAVIRT is enabled, as the patch is really supposed to change the size of the pfn args. [ v2: KVM_GUEST: use the right parameter type on kvm_release_pt() ] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21xen: measure how long spinlocks spend blockingJeremy Fitzhardinge
Measure how long spinlocks spend blocked. Also rename some fields to be more consistent. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21xen: allow interrupts to be enabled while doing a blocking spinJeremy Fitzhardinge
If spin_lock is called in an interrupts-enabled context, we can safely enable interrupts while spinning. We don't bother for the actual spin loop, but if we timeout and fall back to blocking, it's definitely worthwhile enabling interrupts if possible. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21xen: add debugfs supportJeremy Fitzhardinge
Add support for exporting statistics on mmu updates, multicall batching and pv spinlocks into debugfs. The base path is xen/ and each subsystem adds its own directory: mmu, multicalls, spinlocks. In each directory, writing 1 to "zero_stats" will cause the corresponding stats to be zeroed the next time they're updated. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21xen: save previous spinlock when blockingJeremy Fitzhardinge
A spinlock can be interrupted while spinning, so make sure we preserve the previous lock of interest if we're taking a lock from within an interrupt handler. We also need to deal with the case where the blocking path gets interrupted between testing to see if the lock is free and actually blocking. If we get interrupted there and end up in the state where the lock is free but the irq isn't pending, then we'll block indefinitely in the hypervisor. This fix is to make sure that any nested lock-takers will always leave the irq pending if there's any chance the outer lock became free. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20xen: add xen_ prefixes to make tracing with ftrace easierJeremy Fitzhardinge
It's easier to pattern match on Xen function if they all start with xen_. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20xen: clarify locking used when pinning a pagetable.Jeremy Fitzhardinge
Add some comments explaining the locking and pinning algorithm when using split pte locks. Also implement a minor optimisation of not pinning the PTE when not using split pte locks. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20xen: clean up domain mode predicatesJeremy Fitzhardinge
There are four operating modes Xen code may find itself running in: - native - hvm domain - pv dom0 - pv domU Clean up predicates for testing for these states to make them more consistent. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31xen_alloc_ptpage: cast PFN_PHYS() argument to unsigned longEduardo Habkost
Currently paravirt_ops alloc_p*() uses u32 for the pfn args. We should change that later, but while the pfn parameter is still u32, we need to cast the PFN_PHYS() argument at xen_alloc_ptpage() to unsigned long, otherwise it will lose bits on the shift. I think PFN_PHYS() should behave better when fed with smaller integers, but a cast to unsigned long won't be enough for all cases on 32-bit PAE, and a cast to u64 would be overkill for most users of PFN_PHYS(). We could have two different flavors of PFN_PHYS: one for low pages only (unsigned long) and another that works for any page (u64)), but while we don't have it, we will need the cast to unsigned long on xen_alloc_ptpage(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31xen: fix allocation and use of large ldts, cleanupJeremy Fitzhardinge
Add a proper comment for set_aliased_prot() and fix an unsigned long/void * warning. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31xen: compile irq functions without -pg for ftraceJeremy Fitzhardinge
For some reason I managed to miss a bunch of irq-related functions which also need to be compiled without -pg when using ftrace. This patch moves them into their own file, and starts a cleanup process I've been meaning to do anyway. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Alex Nixon (Intern)" <Alex.Nixon@eu.citrix.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31Merge branch 'x86/spinlocks' into x86/xenIngo Molnar
2008-07-28xen: suppress known wrmsrsJeremy Fitzhardinge
In general, Xen doesn't support wrmsr from an unprivileged domain; it just ends up ignoring the instruction and printing a message on the console. Given that there are sets of MSRs we know the kernel will try to write to, but we don't care, just eat them in xen_write_msr to cut down on console noise. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28xen: fix allocation and use of large ldtsJeremy Fitzhardinge
When the ldt gets to more than 1 page in size, the kernel uses vmalloc to allocate it. This means that: - when making the ldt RO, we must update the pages in both the vmalloc mapping and the linear mapping to make sure there are no RW aliases. - we need to use arbitrary_virt_to_machine to compute the machine addr for each update Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flagsEduardo Habkost
Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26Merge branch 'linus' into x86/xenIngo Molnar
2008-07-25Merge branch 'linus' into x86/x2apicIngo Molnar
Conflicts: drivers/pci/dmar.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86: split spinlock implementations out into their own filesJeremy Fitzhardinge
ftrace requires certain low-level code, like spinlocks and timestamps, to be compiled without -pg in order to avoid infinite recursion. This patch splits out the core paravirt spinlocks and the Xen spinlocks into separate files which can be compiled without -pg. Also do xen/time.c while we're about it. As a result, we can now use ftrace within a Xen domain. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86/paravirt/xen: properly fill out the ldt opsJeremy Fitzhardinge
LTP testing showed that Xen does not properly implement sys_modify_ldt(). This patch does the final little bits needed to make the ldt work properly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24xen: don't use sysret for sysexit32Jeremy Fitzhardinge
When implementing sysexit32, don't let Xen use sysret to return to userspace. That results in usermode register state being trashed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>