aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2008-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: add acpi_find_root_bridge_handle PCI: acpi_pcihp: run _OSC on a root bridge x86/PCI: irq and pci_ids patch for Intel Ibex Peak PCHs x86/PCI: allow scanning of 255 PCI busses x86, pci: detect end_bus_number according to acpi/e820 reserved, v2 pci: debug extra pci bus resources pci: debug extra pci resources range
2008-08-19Revert "[CPUFREQ][2/2] preregister support for powernow-k8"Linus Torvalds
This reverts commit 34ae7f35a21694aa5cb8829dc5142c39d73d6ba0, which has been reported to cause a number of problems. During suspend and resume, it apparently causes a crash in a CPU hotplug notifier to happen, although the exact details are sketchy because of the inability to get good traces during the suspend sequence. See buzilla entries http://bugzilla.kernel.org/show_bug.cgi?id=11296 http://bugzilla.kernel.org/show_bug.cgi?id=11339 for more examples and details. [ Mark: "Revert the patch for now. I'm still looking into getting a reliable reproduction and I do not have a fix at this time." ] Requested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@inux-foundation.org>
2008-08-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix build warnings in real mode code x86, calgary: fix section mismatch warning - get_tce_space_from_tar x86: silence section mismatch warning - get_local_pda x86, percpu: silence section mismatch warnings related to EARLY_PER_CPU variables x86: fix i486 suspend to disk CR4 oops x86: mpparse.c: fix section mismatch warning x86: mmconf: fix section mismatch warning x86: fix MP_processor_info section mismatch warning x86, tsc: fix section mismatch warning x86: correct register constraints for 64-bit atomic operations
2008-08-18Merge branch 'pci-for-jesse' of ↵Jesse Barnes
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into x86-merge Conflicts: drivers/pci/probe.c
2008-08-18x86: fix build warnings in real mode codeAndi Kleen
This recent patch commit c3965bd15118742d72b4bc1a290d37b3f081eb98 Author: Paul Jackson <pj@sgi.com> Date: Wed May 14 08:15:34 2008 -0700 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant caused these new warnings during a normal build: In file included from linux-2.6/arch/x86/boot/memory.c:17: linux-2.6/include/linux/log2.h: In function '__ilog2_u32': linux-2.6/include/linux/log2.h:34: warning: implicit declaration of function 'fls' linux-2.6/include/linux/log2.h: In function '__ilog2_u64': linux-2.6/include/linux/log2.h:42: warning: implicit declaration of function 'fls64' linux-2.6/include/linux/log2.h: In function '__roundup_pow_of_two ': linux-2.6/include/linux/log2.h:63: warning: implicit declaration of function 'fls_long' I tried to fix them in log2.h, but it's difficult because the real mode environment is completely different from a normal kernel environment. Instead define an own ARRAY_SIZE macro in boot.h, similar to the other private macros there. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86, calgary: fix section mismatch warning - get_tce_space_from_tarMarcin Slusarz
WARNING: vmlinux.o(.text+0x27032): Section mismatch in reference from the function get_tce_space_from_tar() to the function .init.text:calgary_bus_has_devices() The function get_tce_space_from_tar() references the function __init calgary_bus_has_devices(). This is often because get_tce_space_from_tar lacks a __init annotation or the annotation of calgary_bus_has_devices is wrong. get_tce_space_from_tar is called only from __init function (calgary_init) and calls __init function (calgary_bus_has_devices). So annotate it properly. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Chandru Siddalingappa <chandru@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: silence section mismatch warning - get_local_pdaMarcin Slusarz
Take out part of get_local_pda referencing __init function (free_bootmem) to new (static) function marked as __ref. It's safe to do because free_bootmem is called before __init sections are dropped. WARNING: vmlinux.o(.cpuinit.text+0x3cd7): Section mismatch in reference from the function get_local_pda() to the function .init.text:free_bootmem() The function __cpuinit get_local_pda() references a function __init free_bootmem(). If free_bootmem is only used by get_local_pda then annotate free_bootmem with a matching annotation. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: fix i486 suspend to disk CR4 oopsDavid Fries
arch/x86/power/cpu_32.c __save_processor_state calls read_cr4() only a i486 CPU doesn't have the CR4 register. Trying to read it produces an invalid opcode oops during suspend to disk. Use the safe rc4 reading op instead. If the value to be written is zero the write is skipped. arch/x86/power/hibernate_asm_32.S done: swapped the use of %eax and %ecx to use jecxz for the zero test and jump over store to %cr4. restore_image: s/%ecx/%eax/ to be consistent with done: In addition to __save_processor_state, acpi_save_state_mem, efi_call_phys_prelog, and efi_call_phys_epilog had checks added (acpi restore was in assembly and already had a check for non-zero). There were other reads and writes of CR4, but MCE and virtualization shouldn't be executed on a i486 anyway. Signed-off-by: David Fries <david@fries.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: mpparse.c: fix section mismatch warningMarcin Slusarz
WARNING: vmlinux.o(.text+0x118f7): Section mismatch in reference from the function construct_ioapic_table() to the function .init.text:MP_bus_info() The function construct_ioapic_table() references the function __init MP_bus_info(). This is often because construct_ioapic_table lacks a __init annotation or the annotation of MP_bus_info is wrong. construct_ioapic_table is called only from construct_default_ISA_mptable which is __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: mmconf: fix section mismatch warningMarcin Slusarz
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1591): Section mismatch in reference from the function init_amd() to the function .init.text:check_enable_amd_mmconf_dmi() The function __cpuinit init_amd() references a function __init check_enable_amd_mmconf_dmi(). If check_enable_amd_mmconf_dmi is only used by init_amd then annotate check_enable_amd_mmconf_dmi with a matching annotation. check_enable_amd_mmconf_dmi is only called from init_amd which is __cpuinit Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: fix MP_processor_info section mismatch warningMarcin Slusarz
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1fe7): Section mismatch in reference from the function MP_processor_info() to the variable .init.data:x86_quirks The function __cpuinit MP_processor_info() references a variable __initdata x86_quirks. If x86_quirks is only used by MP_processor_info then annotate x86_quirks with a matching annotation. MP_processor_info uses x86_quirks which is __init and is used only from smp_read_mpc and construct_default_ISA_mptable which are __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86, tsc: fix section mismatch warningMarcin Slusarz
WARNING: vmlinux.o(.text+0x7950): Section mismatch in reference from the function native_calibrate_tsc() to the function .init.text:tsc_read_refs() The function native_calibrate_tsc() references the function __init tsc_read_refs(). This is often because native_calibrate_tsc lacks a __init annotation or the annotation of tsc_read_refs is wrong. tsc_read_refs is called from native_calibrate_tsc which is not __init and native_calibrate_tsc cannot be marked __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-16Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits) x86: add MAP_STACK mmap flag x86: fix section mismatch warning - spp_getpage() x86: change init_gdt to update the gdt via write_gdt, rather than a direct write. x86-64: fix overlap of modules and fixmap areas x86, geode-mfgpt: check IRQ before using MFGPT as clocksource x86, acpi: cleanup, temp_stack is used only when CONFIG_SMP is set x86: fix spin_is_contended() x86, nmi: clean UP NMI watchdog failure message x86, NMI: fix watchdog failure message x86: fix /proc/meminfo DirectMap x86: fix readb() et al compile error with gcc-3.2.3 arch/x86/Kconfig: clean up, experimental adjustement x86: invalidate caches before going into suspend x86, perfctr: don't use CCCR_OVF_PMI1 on Pentium 4Ds x86, AMD IOMMU: initialize dma_ops after sysfs registration x86m AMD IOMMU: cleanup: replace LOW_U32 macro with generic lower_32_bits x86, AMD IOMMU: initialize device table properly x86, AMD IOMMU: use status bit instead of memory write-back for completion wait x86: silence mmconfig printk x86, msr: fix NULL pointer deref due to msr_open on nonexistent CPUs ...
2008-08-15Merge branch 'release-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6 * 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: cpuidle: Make ladder governor honor latency requirements fully cpuidle: Menu governor fix wrong usage of measured_us cpuidle: Do not use poll_idle unless user asks for it x86: Fix ioremap off by one BUG
2008-08-15x86: fix section mismatch warning - spp_getpage()Marcin Slusarz
WARNING: vmlinux.o(.text+0x17a3e): Section mismatch in reference from the function set_pte_vaddr_pud() to the function .init.text:spp_getpage() The function set_pte_vaddr_pud() references the function __init spp_getpage(). This is often because set_pte_vaddr_pud lacks a __init annotation or the annotation of spp_getpage is wrong. spp_getpage is called from __init (__init_extra_mapping) and non __init (set_pte_vaddr_pud) functions, so it can't be __init. Unfortunately it calls alloc_bootmem_pages which is __init, but does it only when bootmem allocator is available (after_bootmem == 0). So annotate it accordingly. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
2008-08-15x86: change init_gdt to update the gdt via write_gdt, rather than a direct ↵Alex Nixon
write. By writing directly, a memory access violation can occur whilst hotplugging a CPU if the entry was previously marked read-only. Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: Fix ioremap off by one BUGAndi Kleen
Jean Delvare's machine triggered this BUG acpi_os_map_memory phys ffff0000 size 65535 ------------[ cut here ]------------ kernel BUG at arch/x86/mm/pat.c:233! with ACPI in the backtrace. Adding some debugging output showed that ACPI calls acpi_os_map_memory phys ffff0000 size 65535 And ioremap/PAT does this check in 32bit, so addr+size wraps and the BUG in reserve_memtype() triggers incorrectly. BUG_ON(start >= end); /* end is exclusive */ But reserve_memtype already uses u64: int reserve_memtype(u64 start, u64 end, so the 32bit truncation must happen in the caller. Presumably in ioremap when it passes this information to reserve_memtype(). This patch does this computation in 64bit. http://bugzilla.kernel.org/show_bug.cgi?id=11346 Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15x86/PCI: irq and pci_ids patch for Intel Ibex Peak PCHsSeth Heasley
This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-15Merge branch 'x86/geode' into x86/urgentIngo Molnar
2008-08-15kexec jump: fix for ftraceHuang Ying
Ftrace depends on some processor state that we destroyed during kexec and restored by restore_processor_state(). So save_processor_state() and restore_processor_state() are moved into machine_kexec() and ftrace is restored after restore_processor_state(). Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: check code size in control pageHuang Ying
Kexec/Kexec-jump require code size in control page is less than PAGE_SIZE/2. This patch add link-time checking for this. ASSERT() of ld link script is used as the link-time checking mechanism. [akpm@linux-foundation.org: build fix] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZEHuang Ying
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15x86-64: fix overlap of modules and fixmap areasJan Beulich
Plus add a build time check so this doesn't go unnoticed again. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, geode-mfgpt: check IRQ before using MFGPT as clocksourceJens Rottmann
Adds a simple IRQ autodetection to the AMD Geode MFGPT driver, and more importantly, adds some checks, if IRQs can actually be received on the chosen line. This fixes cases where MFGPT is selected as clocksource though not producing any ticks, so the kernel simply starves during boot. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Cc: Andres Salomon <dilinger@debian.org> Cc: linux-geode@bombadil.infradead.org Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, acpi: cleanup, temp_stack is used only when CONFIG_SMP is setMarcin Slusarz
fix: arch/x86/kernel/acpi/sleep.c:24: warning: 'temp_stack' defined but not used [ Sven Wegener <sven.wegener@stealer.net>: fix build bug ] Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, nmi: clean UP NMI watchdog failure messageIngo Molnar
clean up the failure message - and redirect people to bugzilla instead of lkml. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, NMI: fix watchdog failure messageAristeu Rozanski
> it just won't work at boot time - the second logic unit will be stuck: > > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5586.12 BogoMIPS (lpj=2793063) > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM1) > Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 > Brought up 2 CPUs > testing NMI watchdog ... <4>WARNING: CPU#1: NMI appears to be stuck (0->0)! while at it... - fix that newline Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: jvillalo@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: fix /proc/meminfo DirectMapHugh Dickins
Do we actually want these DirectMap lines in the x86 /proc/meminfo? I can see they're interesting to CPA developers and TLB optimizers, but they don't fit its usual "where has all my memory gone?" usage. If they are to stay, here are some fixes. 1. On x86_32 without PAE, they're not 2M but 4M pages: no need to mess with the internal enum, but show the right name to users. 2. Many machines can never show anything but 0 for DirectMap1G, so suppress that line unless direct_gbpages are really enabled. 3. The unit in /proc/meminfo is kB not number of pages: HugePages messed that up, but they're an example to regret not to follow. 4. Once we use kB, it's easy to see that 1GB has gone missing (which explains why CONFIG_CPA_DEBUG=y soon wraps DirectMap2M negative): because head_64.S's level2_ident_pgt entries were not counted. My fix is not ideal, but works for more and for less than 1G, and avoids interfering with early bootup pagetable contortions. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15arch/x86/Kconfig: clean up, experimental adjustementPavel Machek
Adjust experimental tags in Kconfig, update config to notice that i386/x86_64 is now single architecture. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: invalidate caches before going into suspendMark Langsdorf
When a CPU core is shut down, all of its caches need to be flushed to prevent stale data from causing errors if the core is resumed. Current Linux suspend code performs an assignment after the flush, which can add dirty data back to the cache.  On some AMD platforms, additional speculative reads have caused crashes on resume because of this dirty data. Relocate the cache flush to be the very last thing done before halting.  Tie into an assembly line so the compile will not reorder it.  Add some documentation explaining what is going on and why we're doing this. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Acked-by: Mark Borden <mark.borden@amd.com> Acked-by: Michael Hohmuth <michael.hohmuth@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, perfctr: don't use CCCR_OVF_PMI1 on Pentium 4DsAristeu Rozanski
Currently, setup_p4_watchdog() use CCCR_OVF_PMI1 to enable the counter overflow interrupts to the second logical core. But this bit doesn't work on Pentium 4 Ds (model 4, stepping 4) and this patch avoids its use on these processors. Tested on 4 different machines that have this specific model with success. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: jvillalovos@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15Merge branch 'x86/amd-iommu' into x86/urgentIngo Molnar
2008-08-15x86, AMD IOMMU: initialize dma_ops after sysfs registrationJoerg Roedel
If sysfs registration fails all memory used by IOMMU is freed. This happens after dma_ops initialization and the functions will access the freed memory then. Fix this by initializing dma_ops after the sysfs registration. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86m AMD IOMMU: cleanup: replace LOW_U32 macro with generic lower_32_bitsJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, AMD IOMMU: initialize device table properlyJoerg Roedel
This patch adds device table initializations which forbids memory accesses for devices per default and disables all page faults. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, AMD IOMMU: use status bit instead of memory write-back for completion waitJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: silence mmconfig printkDave Jones
There's so much broken mmconfig hardware/bios'es out there, that classing this as an error seems a little extreme. Lower its priority to KERN_INFO so that it isn't so noisy when booting with 'quiet' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, msr: fix NULL pointer deref due to msr_open on nonexistent CPUsDarrick J. Wong
msr_open tests for someone trying to open a device for a nonexistent CPU. However, the function always returns 0, not ret like it should, hence userspace can BUG the kernel trivially. This bug was introduced by the cdev lock_kernel pushdown patch last May. The BUG can be reproduced with these commands: # mknod fubar c 202 8 <-- pick a number less than NR_CPUS that is not the number of an online CPU # cat fubar Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14x86: hpet: workaround SB700 BIOSThomas Gleixner
AMD SB700 based systems with spread spectrum enabled use a SMM based HPET emulation to provide proper frequency setting. The SMM code is initialized with the first HPET register access and takes some time to complete. During this time the config register reads 0xffffffff. We check for max. 1000 loops whether the config register reads a non 0xffffffff value to make sure that HPET is up and running before we go further. A counting loop is safe, as the HPET access takes thousands of CPU cycles. On non SB700 based machines this check is only done once and has no side effects. Based on a quirk patch from: crane cai <crane.cai@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-08-14x86: check bigsmp in smp_sanity_check instead of cpu_upYinghai Lu
clear bits for cpu nr > 8. This allows us to boot the full range of possible CPUs that the supported APIC model will allow. Previously we'd hang or boot up with less than 8 CPUs. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14x86: don't call e820_regiter_active_regions if out of range on nodeYinghai Lu
so we don't get warning on 32bit system with 64g RAM or more Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14x86: resurrect proper handling of maxcpus= kernel option (v2)Max Krasnyansky
For some reason we had two parsers registered for maxcpus=. One in init/main.c and another in arch/x86/smpboot.c. So I nuked the one in arch/x86. Also 64-bit kernels used to handle maxcpus= as documented in Documentation/cpu-hotplug.txt. CPUs with 'id > maxcpus' are initialized but not booted. 32-bit version for some reason ignored them even though all the infrastructure for booting them later is there. In the current mainline both 64 and 32 bit versions are broken. This patch restores the correct behaviour. I've tested x86_64 version on 4- and 8- way Core2 and 2-way Opteron based machines. Various config combinations SMP, !SMP, CPU_HOTPLUG, !CPU_HOTPLUG. Booted with maxcpus=1 and maxcpus=4, etc. Everything is working as expected. So far we've received two reports from different people confirming that 32-bit version also works fine, both on dual core laptops and 16way server machines. [v2: This version fixes visws breakage pointed out by Ingo.] Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: lizf@cn.fujitsu.com Cc: jeff.chua.linux@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14Merge branch 'x86/fpu' into x86/urgentIngo Molnar
2008-08-14x86: cleanup for setup code crashes during IST probeH. Peter Anvin
Clean up the code for crashes during SpeedStep probing on older machines. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13x86: use WARN() in arch/x86/mm/pageattr.cArjan van de Ven
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13x86: allow MMCONFIG above 4GB on x86_64John Keller
SGI UV will have MMCFG base addresses that are greater than 4GB (32 bits). v2: Use CONFIG_RESOURCES_64BIT instead of CONFIG_X86_64. v3: Create a flag, that is set by platform specific code, to disable the > 4GB check. Signed-off-by: John Keller <jpk@sgi.com> Cc: jpk@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13x86: fix 2 section mismatch warnings - find_and_reserve_crashkernelMarcin Slusarz
WARNING: vmlinux.o(.text+0xcd1f): Section mismatch in reference from the function find_and_reserve_crashkernel() to the function .init.text:find_e820_area() The function find_and_reserve_crashkernel() references the function __init find_e820_area(). This is often because find_and_reserve_crashkernel lacks a __init annotation or the annotation of find_e820_area is wrong. WARNING: vmlinux.o(.text+0xcd38): Section mismatch in reference from the function find_and_reserve_crashkernel() to the function .init.text:reserve_bootmem_generic() The function find_and_reserve_crashkernel() references the function __init reserve_bootmem_generic(). This is often because find_and_reserve_crashkernel lacks a __init annotation or the annotation of reserve_bootmem_generic is wrong. find_and_reserve_crashkernel is called from __init function (reserve_crashkernel) and calls 2 __init functions (find_e820_area, reserve_bootmem_generic), so mark it __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13x86: fix 2 section mismatch warnings - map_high()Marcin Slusarz
WARNING: vmlinux.o(.text+0x14cf8): Section mismatch in reference from the function map_high() to the function .init.text:init_extra_mapping_uc() The function map_high() references the function __init init_extra_mapping_uc(). This is often because map_high lacks a __init annotation or the annotation of init_extra_mapping_uc is wrong. WARNING: vmlinux.o(.text+0x14d05): Section mismatch in reference from the function map_high() to the function .init.text:init_extra_mapping_wb() The function map_high() references the function __init init_extra_mapping_wb(). This is often because map_high lacks a __init annotation or the annotation of init_extra_mapping_wb is wrong. map_high is called only from __init functions (map_*_high) and calls 2 __init_functions (init_extra_mapping_*) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13Merge commit 'v2.6.27-rc3' into x86/urgentIngo Molnar
2008-08-13x86: fix setup code crashes on my old 486 boxJoerg Roedel
yesterday I tried to reactivate my old 486 box and wanted to install a current Linux with latest kernel on it. But it turned out that the latest kernel does not boot because the machine crashes early in the setup code. After some debugging it turned out that the problem is the query_ist() function. If this interrupt with that function is called the machine simply locks up. It looks like a BIOS bug. Looking for a workaround for this problem I wrote the attached patch. It checks for the CPUID instruction and if it is not implemented it does not call the speedstep BIOS function. As far as I know speedstep should be available since some Pentium earliest. Alan Cox observed that it's available since the Pentium II, so cpuid levels 4 and 5 can be excluded altogether. H. Peter Anvin cleaned up the code some more: > Right in concept, but I dislike the implementation (duplication of the > CPU detect code we already have). Could you try this patch and see if > it works for you? which, with a small modification to fix a build error with it the resulting kernel boots on my machine. Signed-off-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>