aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64/kernel
AgeCommit message (Collapse)Author
2006-04-26[PATCH] Remove __devinit and __cpuinit from notifier_call definitionsChandra Seetharaman
Few of the notifier_chain_register() callers use __init in the definition of notifier_call. It is incorrect as the function definition should be available after the initializations (they do not unregister them during initializations). This patch fixes all such usages to _not_ have the notifier_call __init section. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-22[PATCH] x86_64: Fix a race in the free_iommu pathMike Waychison
We do this by removing a micro-optimization that tries to avoid grabbing the iommu_bitmap_lock spinlock and using a bus-locked operation. This still races with other simultaneous alloc_iommu or free_iommu(size > 1) which both use bus-unlocked operations. The end result of this race is eventually ending up with an iommu_gart_bitmap that has bits errornously set all over, making large contiguous iommu space allocations fail with 'PCI-DMA: Out of IOMMU space'. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20[PATCH] i386/x86-64: Fix x87 information leak between processesAndi Kleen
AMD K7/K8 CPUs only save/restore the FOP/FIP/FDP x87 registers in FXSAVE when an exception is pending. This means the value leak through context switches and allow processes to observe some x87 instruction state of other processes. This was actually documented by AMD, but nobody recognized it as being different from Intel before. The fix first adds an optimization: instead of unconditionally calling FNCLEX after each FXSAVE test if ES is pending and skip it when not needed. Then do a x87 load from a kernel variable to clear FOP/FIP/FDP. This means other processes always will only see a constant value defined by the kernel in their FP state. I took some pain to make sure to chose a variable that's already in L1 during context switch to make the overhead of this low. Also alternative() is used to patch away the new code on CPUs who don't need it. Patch for both i386/x86-64. The problem was discovered originally by Jan Beulich. Richard Brunner provided the basic code for the workarounds, with contribution from Jan. This is CVE-2006-1056 Cc: richard.brunner@amd.com Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] Switch Kprobes inline functions to __kprobes for x86_64Prasanna S Panchamukhi
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-18[PATCH] x86_64: x86_64 add crashdump trigger pointsVivek Goyal
o Start booting into the capture kernel after an Oops if system is in a unrecoverable state. System will boot into the capture kernel, if one is pre-loaded by the user, and capture the kernel core dump. o One of the following conditions should be true to trigger the booting of capture kernel. - panic_on_oops is set. - pid of current thread is 0 - pid of current thread is 1 - Oops happened inside interrupt context. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-14[PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/Bjorn Helgaas
dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11[PATCH] x86_64: Remove check for canonical RIPAndi Kleen
As pointed out by Linus it is useless now because entry.S should handle it correctly in all cases. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] No arch-specific strpbrk implementationsKyle McMartin
While cleaning up parisc_ksyms.c earlier, I noticed that strpbrk wasn't being exported from lib/string.c. Investigating further, I noticed a changeset that removed its export and added it to _ksyms.c on a few more architectures. The justification was that "other arches do it." I think this is wrong, since no architecture currently defines __HAVE_ARCH_STRPBRK, there's no reason for any of them to be exporting it themselves. Therefore, consolidate the export to lib/string.c. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Plug GS leak in arch_prctl()John Blackwood
In linux-2.6.16, we have noticed a problem where the gs base value returned from an arch_prtcl(ARCH_GET_GS, ...) call will be incorrect if: - the current/calling task has NOT set its own gs base yet to a non-zero value, - some other task that ran on the same processor previously set their own gs base to a non-zero value. In this situation, the ARCH_GET_GS code will read and return the MSR_KERNEL_GS_BASE msr register. However, since the __switch_to() code does NOT load/zero the MSR_KERNEL_GS_BASE register when the task that is switched IN has a zero next->gs value, the caller of arch_prctl(ARCH_GET_GS, ...) will get back the value of some previous tasks's gs base value instead of 0. Change the arch_prctl() ARCH_GET_GS code to only read and return the MSR_KERNEL_GS_BASE msr register if the 'gs' register of the calling task is non-zero. Side note: Since in addition to using arch_prctl(ARCH_SET_GS, ...), a task can also setup a gs base value by using modify_ldt() and write an index value into 'gs' from user space, the patch below reads 'gs' instead of using thread.gs, since in the modify_ldt() case, the thread.gs value will be 0, and incorrect value would be returned (the task->thread.gs value). When the user has not set its own gs base value and the 'gs' register is zero, then the MSR_KERNEL_GS_BASE register will not be read and a value of zero will be returned by reading and returning 'task->thread.gs'. The first patch shown below is an attempt at implementing this approach. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Fix drift with HPET timer enabledJordan Hargrave
If the HPET timer is enabled, the clock can drift by ~3 seconds a day. This is due to the HPET timer not being initialized with the correct setting (still using PIT count). If HZ changes, this drift can become even more pronounced. HPET patch initializes tick_nsec with correct tick_nsec settings for HPET timer. Vojtech comments: "It's not entirely correct (it assumes the HPET ticks totally exactly), but it's significantly better than assuming the PIT error there." Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Fixup read_mostly section on internode cache line size for vSMPRavikiran G Thirumalai
Fixup the read mostly section to start at internode cacheline boundary. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Don't return error for HPET initialization in initcallAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Don't export strlen twiceAndi Kleen
Fix WARNING: vmlinux: 'strlen' exported twice. Previous export was in vmlinux Reported by Mats Johannesson Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: When user could have changed RIP always force IRETAndi Kleen
Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Don't run NMI watchdog during machine checksAndi Kleen
Machine checks can stall the machine for a long time and it's not good to trigger the nmi watchdog during that. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Clear APIC feature bit when local APIC is disabledAndi Kleen
Needed for other checks later in ACPI. Pointed out by Len Brown Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Fix compilation with CONFIG_PCI=n / allnoconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Introduce e820_all_mappedArjan van de Ven
Introduce a e820_all_mapped() function which checks if the entire range <start,end> is mapped with type. This is done by moving the local start variable to the end of each known-good region; if at the end of the function the start address is still before end, there must be a part that's not of the correct type; otherwise it's a good region. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Rename e820_mapped to e820_any_mappedArjan van de Ven
Rename e820_mapped to e820_any_mapped since it tests if any part of the range is mapped according to the type. Later steps will introduce e820_all_mapped which will check if the entire range is mapped with the type. Both have their merit. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Support memory hotadd without sparsememAndi Kleen
Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating mem_maps. This only needs some untangling of ifdefs to enable the necessary code even without SPARSEMEM. Originally from Keith Mannthey, hacked by AK. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Clean up execve pathAndi Kleen
Just call IRET always, no need for any special cases. Needed for the next bug fix. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] unexport get_wchanAdrian Bunk
The only user of get_wchan is the proc fs - and proc can't be built modular. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] Don't pass boot parameters to argv_init[]OGAWA Hirofumi
The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] RTC: Remove RTC UIP synchronization on x86_64Matt Mackall
Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Andi Kleen <ak@muc.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] Notifier chain update: API changesAlan Stern
The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] sched: new sched domain for representing multi-coreSiddha, Suresh B
Add a new sched domain for representing multi-core with shared caches between cores. Consider a dual package system, each package containing two cores and with last level cache shared between cores with in a package. If there are two runnable processes, with this appended patch those two processes will be scheduled on different packages. On such systems, with this patch we have observed 8% perf improvement with specJBB(2 warehouse) benchmark and 35% improvement with CFP2000 rate(with 2 users). This new domain will come into play only on multi-core systems with shared caches. On other systems, this sched domain will be removed by domain degeneration code. This new domain can be also used for implementing power savings policy (see OLS 2005 CMP kernel scheduler paper for more details.. I will post another patch for power savings policy soon) Most of the arch/* file changes are for cpu_coregroup_map() implementation. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] kprobes: fix broken fault handling for x86_64Prasanna S Panchamukhi
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] kprobe handler: discard user space trapbibo,mao
Currently kprobe handler traps only happen in kernel space, so function kprobe_exceptions_notify should skip traps which happen in user space. This patch modifies this, and it is based on 2.6.16-rc4. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: <hiramatu@sdl.hitachi.co.jp> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] kretprobe instance recycled by parent processbibo mao
When kretprobe probes the schedule() function, if the probed process exits then schedule() will never return, so some kretprobe instances will never be recycled. In this patch the parent process will recycle retprobe instances of the probed function and there will be no memory leak of kretprobe instances. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Add cpu_relax() to busy loops in PM timer codeAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Report SIGSEGV for IRET faultsAndi Kleen
tcsh is not happy with the -9999 error code. Suggested by Ernie Petrides Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Remove bogus special case in AMD core parsing.Andi Kleen
No need to restrict to power of two here. TBD needs more double checking Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Eliminate register_die_notifier symbol exportedKevin Winchester
register_die_notifier is exported twice, once in traps.c and once in x8664_ksyms.c. This results in a warning on build. Signed-off-by: Kevin Winchester <kwin@ns.sympatico.ca> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Search K8 devices on more devices.Navin Boppuri
arch/x86_64/kernel/aperture.c: The search for the AGP bridge has been extended to search for all the 256 buses instead of the first 32. This is required since on a some systems, the bridge may be located on a bus much farther than the first 32. By searching all 256 buses, we guarantee that the search succeeds on such systems. arch/x86_64/kernel/pci-gart.c: The search for the Northbridge is not limited to just bus 0 anymore. This is required because on certain systems, we may not find one on bus 0. Signed-off-by: Navin Boppuri <navin.boppuri@newisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] i386/x86-64: List Intel LaGrange AKA SMX in /proc/cpuinfoAndi Kleen
Spec just got published so we know the CPUID bit. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: free_bootmem_node needs __pa in allocate_apertureJon Mason
free_bootmem_node expects a physical address to be passed in, but __alloc_bootmem_node returns a virtual one. That address needs to be translated to physical. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: timer interrupt lockup due to pending interruptVivek Goyal
o check_timer() routine fails while second kernel is booting after a crash on an opetron box. Problem happens because timer vector (0x31) seems to be locked. o After a system crash, it is not safe to service interrupts any more, hence interrupts are disabled. This leads to pending interrupts at LAPIC. LAPIC sends these interrupts to the CPU during early boot of second kernel. Other pending interrupts are discarded saying unexpected trap but timer interrupt is serviced and CPU does not issue an LAPIC EOI because it think this interrupt came from i8259 and sends ack to 8259. This leads to vector 0x31 locking as LAPIC does not clear respective ISR and keeps on waiting for EOI. o This patch issues extra EOI for the pending interrupts who have ISR set. o Though today only timer seems to be the special case because in early boot it thinks interrupts are coming from i8259 and uses mask_and_ack_8259A() as ack handler and does not issue LAPIC EOI. But probably doing it in generic manner for all vectors makes sense. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Use cpumask bitops for cpu_vm_maskBrian Gerst
cpu_vm_mask is of type cpumask_t, so use the proper bitops. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Change default setting for noexec32 to match i386 kernelAndi Kleen
This means i386 processes compiled with a recent compiler will get non executable heap by default now. This is the same default as a 32bit PAE kernel would use on a NX enabled CPU. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: fix orphaned bits of timer init messagesChuck Ebbert
When x86_64 timer init messages were changed to use apic verbosity levels, two messages were missed and one got the wrong level. This causes the last word of a suppressed message to print on a line by itself. Fix that so either the entire message prints or none of it does. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Basic reorder infrastructureArjan van de Ven
This patch puts the infrastructure in place to allow for a reordering of functions based inside the vmlinux. The general idea is that it is possible to put all "common" functions into the first 2Mb of the code, so that they are covered by one TLB entry. This as opposed to the current situation where a typical vmlinux covers about 3.5Mb (on x86-64) and thus 2 TLB entries. This is done by enabling the -ffunction-sections flag in gcc, which puts each function in its own ELF section, so that the linker can then order them in a way defined by the linker script. As per previous discussions, Linus said he wanted a "static" list for this, eg a list provided by the kernel tarbal, so that most people have the same ordering at least. A script is provided to create this list based on readprofile(1) output. The included list is provisional, and entirely biased on my own testbox and me running a few kernel compiles and some other things. I think that to get to a better list we need to invite people to submit their own profiles, and somehow add those all up and base the final list on that. I'm willing to do that effort if this is ends up being the prefered approach. Such an effort probably needs to be repeated like once a year or so to adopt to the changing nature of the kernel. Made it a CONFIG with default n because it increases link times dramatically. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Always use IO-APIC routing for timer.Andi Kleen
I tested it on a couple of chipsets and it worked everywhere so it should be ok as default for now. So far I haven't done the great purge of the useless old check_timer code yet though. Can be overwritten with enable_8254_timer in the worst case Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Don't invoke OOM killer during dma_alloc_coherent()Andi Kleen
There is a fallback logic, so it's better to not use the OOM killer in the allocations. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Reename CMOS update warningAndi Kleen
Was disabled due to an old bug, long gone. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Fix formatting in time.cAndi Kleen
Only white space changes, code should be identical Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Handle years beyond 2100Andi Kleen
ACPIv2 has an official but optional way to get a date >2100. Use it. But all the platforms I tested didn't seem to support it. But anyways the x86-64 kernel should be ready for the 22nd century now. Actually i shouldn't care about this because I will be dead by then @) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Patch to make the head.S-must-be-first-in-vmlinux order explicitArjan van de Ven
This patch puts the code from head.S in a special .bootstrap.text section. I'm working on a patch to reorder the functions in the kernel (I'll post that later), but for x86-64 at least the kernel bootstrap requires that the head.S functions are on the very first page/pages of the kernel text. This is understandable since the bootstrap is complex enough already and not a problem at all, it just means they aren't allowed to be reordered. This patch puts these special functions into a separate section to document this, and to guarantee this in the light of possibly reordering the rest later. (So this patch doesn't fix a bug per se, but makes things more robust by making the order of these functions explicit) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Implement early DMI scanningAndi Kleen
There are more and more cases where we need to know DMI information early to work around bugs. i386 already had early DMI scanning, but x86-64 didn't. Implement this now. This required some cleanup in the i386 code. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: s/Overwrite/Override/ in arch/x86-64Dave Jones
s/Overwrite/Override/ Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: to use lapic ids instead of initial apic idsRavikiran G Thirumalai
phys_proc_id[] on AMD boxes is right now populated with the initial apic id, obtained by the cpuid instruction. But, the initial apic id need not be the local apic id on clustered APIC systems (see comment at x86_64/kernel/genapic_cluster.c, line 110). On vSMPowered with AMD CPUs the cpu_to_node will turn out to be incorrect (as apicid_to_node[] is indexed by the initial apic id rather than the local apic id). On vSMPowered boxes with Intel CPUs this is working correctly as phys_proc_id[] is initialized correctly in detect_ht(). This fixes AMD boot path according to specification, to use the correct routines for local apic id and socket ids. We use hard_smp_processor_id() to read the local apic id, and phys_pkg_id() to determine socket id for phys_proc_id[] Patch tested on Tyan multicore boxes as well as vSMPowered boxes. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>