aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64
AgeCommit message (Collapse)Author
2007-02-16[PATCH] genirq: remove IRQ_DISABLEDIngo Molnar
Now that disable_irq() defaults to delayed-disable semantics, the IRQ_DISABLED flag is not needed anymore. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] genirq: do not mask interrupts by defaultIngo Molnar
Never mask interrupts immediately upon request. Disabling interrupts in high-performance codepaths is rare, and on the other hand this change could recover lost edges (or even other types of lost interrupts) by conservatively only masking interrupts after they happen. (NOTE: with this change the highlevel irq-disable code still soft-disables this IRQ line - and if such an interrupt happens then the IRQ flow handler keeps the IRQ masked.) Mark i8529A controllers as 'never loses an edge'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] time: x86_64: re-enable vsyscall support for x86_64john stultz
Cleanup and re-enable vsyscall gettimeofday using the generic clocksource infrastructure. [akpm@osdl.org: cleanup] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] time: x86_64: convert x86_64 to use GENERIC_TIMEjohn stultz
This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386). [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: fix printk ckeanups] [akpm@osdl.org: hpet build fix] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] time: x86_64: split x86_64/kernel/time.c upjohn stultz
In preparation for the x86_64 generic time conversion, this patch splits out TSC and HPET related code from arch/x86_64/kernel/time.c into respective hpet.c and tsc.c files. [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: cleanup] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] time: x86_64: hpet_address cleanupjohn stultz
In preparation for supporting generic timekeeping, this patch cleans up x86-64's use of vxtime.hpet_address, changing it to just hpet_address as is also used in i386. This is necessary since the vxtime structure will be going away. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] x86: rewrite SMP TSC sync codeIngo Molnar
make the TSC synchronization code more robust, and unify it between x86_64 and i386. The biggest change is the removal of the 'fix up TSCs' code on x86_64 and i386, in some rare cases it was /causing/ time-warps on SMP systems. The new code only checks for TSC asynchronity - and if it can prove a time-warp (if it can observe the TSC going backwards when going from one CPU to another within a critical section), then the TSC clock-source is turned off. The TSC synchronization-checking code also got moved into a separate file. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (94 commits) [PATCH] x86-64: Remove mk_pte_phys() [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386 [PATCH] i386: fix 32-bit ioctls on x64_32 [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64 [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header. [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c [PATCH] i386: Move mce_disabled to asm/mce.h [PATCH] i386: paravirt unhandled fallthrough [PATCH] x86_64: Wire up compat epoll_pwait [PATCH] x86: Don't require the vDSO for handling a.out signals [PATCH] i386: Fix Cyrix MediaGX detection [PATCH] i386: Fix warning in cpu initialization [PATCH] i386: Fix warning in microcode.c [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo [PATCH] i386: Remove fastcall in paravirt.[ch] [PATCH] x86-64: Fix wrong gcc check in bitops.h [PATCH] x86-64: survive having no irq mapping for a vector [PATCH] i386: geode configuration fixes [PATCH] i386: add option to show more code in oops reports ...
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/mm/init.cEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/kernel/vsyscall.cEric W. Biederman
Basically everything was done but I removed all element initializers from the trailing entries to make it clear the entire last entry should be zero filled. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/ia32/ia32_binfmt.cEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: x86_64: remove unnecessary use of insert_at_headEric W. Biederman
The only sysctl x86_64 provides are not provided elsewhere, so insert_at_head is unnecessary. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-13[PATCH] x86-64: Remove mk_pte_phys()Andi Kleen
- Convert last user to pfn_pte - Remove mk_pte_phys Suggested by Jan Beulich Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86: Unify pcspeaker platform device code between i386/x86-64Andi Kleen
Trivial cleanup. Only change is that it is always compiled in now on x86-64 like on i386. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86_64: Wire up compat epoll_pwaitRalf Baechle
> Which remembers me that I think that MIPS is using the non-compat version > of sys_epoll_pwait for compat syscalls. But maybe MIPS doesn't need a compat > syscall for some reason. Dunno. Which reminds me that x86_64 i386 compat doesn't wire up sys_epoll_pwait ;-) Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86: Don't require the vDSO for handling a.out signalsAndi Kleen
and in other strange binfmts. vDSO is not necessarily mapped there. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUsAndi Kleen
For i386/x86-64. Straight forward -- just reuse the Family 0xf code. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfoAndi Kleen
Just various new acronyms. The new popcnt bit is in the middle of Intel space. This looks a little weird, but I've been assured it's ok. Also I fixed RDTSCP for i386 which was at the wrong place. For i386 and x86-64. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: survive having no irq mapping for a vectorEric W. Biederman
Occasionally the kernel has bugs that result in no irq being found for a given cpu vector. If we acknowledge the irq the system has a good chance of continuing even though we dropped an irq message. If we continue to simply print a message and not acknowledge the irq the system is likely to become non-responsive shortly there after. AK: Fixed compilation for UP kernels Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: "Luigi Genoni" <luigi.genoni@pirelli.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13[PATCH] x86-64: Minor patch for compilation warning in x86_64 signal codeEvgeniy Polyakov
If DEBUG_SIG is enbaled in source code, ia32_signal.c compiles with warning due to wrong format string. Attached patch fixes that. It is quite minor update, since by default DEBUG_SIG is not enabled and can not be turned on without code modification. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13[PATCH] x86-64: avoid warning message livelockRoland Dreier
I've seen my box paralyzed by an endless spew of rtc: lost some interrupts at 1024Hz. messages on the serial console. What seems to be happening is that something real causes an interrupt to be lost and triggers the message. But then printing the message to the serial console (from the hpet interrupt handler) takes more than 1/1024th of a second, and then some more interrupts are lost, so the message triggers again.... Fix this by adding a printk_ratelimit() before printing the warning. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: update IO-APIC dest field to 8-bit for xAPICBenjamin Romer
On the Unisys ES7000/ONE system, we encountered a problem where performing a kexec reboot or dump on any cell other than cell 0 causes the system timer to stop working, resulting in a hang during timer calibration in the new kernel. We traced the problem to one line of code in disable_IO_APIC(), which needs to restore the timer's IO-APIC configuration before rebooting. The code is currently using the 4-bit physical destination field, rather than using the 8-bit logical destination field, and it cuts off the upper 4 bits of the timer's APIC ID. If we change this to use the logical destination field, the timer works and we can kexec on the upper cells. This was tested on two different cells (0 and 2) in an ES7000/ONE system. For reference, the relevant Intel xAPIC spec is kept at ftp://download.intel.com/design/chipsets/e8501/datashts/30962001.pdf, specifically on page 334. Signed-off-by: Benjamin M Romer <benjamin.romer@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13[PATCH] x86-64: clean up sparsemem memory_present callBob Picco
Eliminate arch specific memory_present call x86_64 NUMA by utilizing sparse_memory_present_with_active_regions. Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13[PATCH] x86: fix laptop bootup hang in init_acpi()Ingo Molnar
During kernel bootup, a new T60 laptop (CoreDuo, 32-bit) hangs about 10%-20% of the time in acpi_init(): Calling initcall 0xc055ce1a: topology_init+0x0/0x2f() Calling initcall 0xc055d75e: mtrr_init_finialize+0x0/0x2c() Calling initcall 0xc05664f3: param_sysfs_init+0x0/0x175() Calling initcall 0xc014cb65: pm_sysrq_init+0x0/0x17() Calling initcall 0xc0569f99: init_bio+0x0/0xf4() Calling initcall 0xc056b865: genhd_device_init+0x0/0x50() Calling initcall 0xc056c4bd: fbmem_init+0x0/0x87() Calling initcall 0xc056dd74: acpi_init+0x0/0x1ee() It's a hard hang that not even an NMI could punch through! Frustratingly, adding printks or function tracing to the ACPI code made the hangs go away ... After some time an additional detail emerged: disabling the NMI watchdog made these occasional hangs go away. So i spent the better part of today trying to debug this and trying out various theories when i finally found the likely reason for the hang: if acpi_ns_initialize_devices() executes an _INI AML method and an NMI happens to hit that AML execution in the wrong moment, the machine would hang. (my theory is that this must be some sort of chipset setup method doing stores to chipset mmio registers?) Unfortunately given the characteristics of the hang it was sheer impossible to figure out which of the numerous AML methods is impacted by this problem. As a workaround i wrote an interface to disable chipset-based NMIs while executing _INI sections - and indeed this fixed the hang. I did a boot-loop of 100 separate reboots and none hung - while without the patch it would hang every 5-10 attempts. Out of caution i did not touch the nmi_watchdog=2 case (it's not related to the chipset anyway and didnt hang). I implemented this for both x86_64 and i686, tested the i686 laptop both with nmi_watchdog=1 [which triggered the hangs] and nmi_watchdog=2, and tested an Athlon64 box with the 64-bit kernel as well. Everything builds and works with the patch applied. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13[PATCH] x86-64: robustify bad_dma_address handlingMuli Ben-Yehuda
- set bad_dma_address explicitly to 0x0 - reserve 32 pages from bad_dma_address and up - WARN_ON() a driver feeding us bad_dma_address Thanks to Leo Duran <leo.duran@amd.com> for the suggestion. Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Leo Duran <leo.duran@amd.com> Cc: Job Mason <jdmason@kudzu.us>
2007-02-13[PATCH] x86-64: Don't reserve ROMsAndi Kleen
We trust the e820 table, so explicitely reserving ROMs shouldn't be needed. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Fix off by one error in IOMMU boundary checkingAndi Kleen
Should be harmless because there is normally no memory there, but technically it was incorrect. Pointed out by Leo Duran Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: x86_64 - Fix FS/GS registers for VT executionZachary Amsden
Initialize FS and GS to __KERNEL_DS as well. The actual value of them is not important, but it is important to reload them in protected mode. At this time, they still retain the real mode values from initial boot. VT disallows execution of code under such conditions, which means hardware virtualization can not be used to boot the kernel on Intel platforms, making the boot time painfully slow. This requires moving the GS load before the load of GS_BASE, so just move all the segments loads there to keep them together in the code. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Unexport __supported_pte_maskAndi Kleen
The symbol is needed to manipulate page tables, and modules shouldn't do that. Leftover from 2.4, but no in tree module should need it now. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Check return value of putreg in PTRACE_SETREGSAndi Kleen
This means if an illegal value is set for the segment registers there ptrace will error out now with an errno instead of silently ignoring it. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: - Ignore long SMI interrupts in clock calibration code - ↵Jack Steiner
update 1 Add failsafe mechanism to HPET/TSC clock calibration. Signed-off-by: Jack Steiner <steiner@sgi.com> Updated to include failsafe mechanism & additional community feedback. Patch built on latest 2.6.20-rc4-mm1 tree. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Kconfig typosNicolas Kaiser
Some typos in Kconfig. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Allow to run a program when a machine check event is detectedAndi Kleen
When a machine check event is detected (including a AMD RevF threshold overflow event) allow to run a "trigger" program. This allows user space to react to such events sooner. The trigger is configured using a new trigger entry in the machinecheck sysfs interface. It is currently shared between all CPUs. I also fixed the AMD threshold handler to run the machine check polling code immediately to actually log any events that might have caused the threshold interrupt. Also added some documentation for the mce sysfs interface. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Tighten mce_amd driver MSR readsJan Beulich
while debugging an unrelated problem in Xen, I noticed odd reads from non-existent MSRs. Having now found time to look why these happen, I came up with below patch, which - prevents accessing MCi_MISCj with j > 0 when the block pointer in MCi_MISC0 is zero - accesses only contiguous MCi_MISCj until a non-implemented one is found - doesn't touch unimplemented blocks in mce_threshold_interrupt at all - gives names to two bits previously derived from MASK_VALID_HI (it took me some time to understand the code without this) The first three items, besides being apparently closer to the spec, should namely help cutting down on the time mce_threshold_interrupt() takes. Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86: simplify notify_page_fault()Jan Beulich
Remove all parameters from this function that aren't really variable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 ↵Venkatesh Pallipadi
nmi_watchdog P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature, only supports write of low 32 bits in Performance Monitoring Counters. Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved and should be zero. This patch: Change x86_64 nmi handler to handle this case cleanly. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Use constant instead of raw number in x86_64 ioperm.cGlauber de Oliveira Costa
This is a tiny cleanup to increase readability Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] x86-64: Remove fastcall references in x86_64 codeGlauber de Oliveira Costa
Unlike x86, x86_64 already passes arguments in registers. The use of regparm attribute makes no difference in produced code, and the use of fastcall just bloats the code. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] x86-64: Fix fake numa for x86_64 machines with big IO holeRohit Seth
This patch resolves the issue of running with numa=fake=X on kernel command line on x86_64 machines that have big IO hole. While calculating the size of each node now we look at the total hole size in that range. Previously there were nodes that only had IO holes in them causing kernel boot problems. We now use the NODE_MIN_SIZE (64MB) as the minimum size of memory that any node must have. We reduce the number of allocated nodes if the number of nodes specified on kernel command line results in any node getting memory smaller than NODE_MIN_SIZE. This change allows the extra memory to be incremented in NODE_MIN_SIZE granule and uniformly distribute among as many nodes (called big nodes) as possible. [akpm@osdl.org: build fix] Signed-off-by: David Rientjes <reintjes@google.com> Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Rohit Seth <rohitseth@google.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] x86-64: do not always end the stack trace with ULONG_MAXCatalin Marinas
It makes more sense to end the stack trace with ULONG_MAX only if nr_entries < max_entries. Otherwise, we lose one entry in the long stack traces and cannot know whether the trace was complete or not. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] x86-64: improved iommu documentationKarsten Weiss
- add SWIOTLB config help text - mention Documentation/x86_64/boot-options.txt in Documentation/kernel-parameters.txt - remove the duplication of the iommu kernel parameter documentation. - Better explanation of some of the iommu kernel parameter options. - "32MB<<order" instead of "32MB^order". - Mention the default "order" value. - list the four existing PCI-DMA mapping implementations of arch x86_64 - group the iommu= option keywords by PCI-DMA mapping implementation. - Distinguish iommu= option keywords from number arguments. - Explain the meaning of DAC and SAC. Signed-off-by: Karsten Weiss <knweiss@science-computing.de> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] mmconfig: fix unreachable_devices()OGAWA Hirofumi
Currently, unreachable_devices() compares value of mmconfig and value of conf1. But it doesn't check the device is reachable or not. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] mmconfig: minor cleanup in mmconfig codeOGAWA Hirofumi
This just cleans up. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] mmconfig: remove #define MMCONFIG_APER_XXXOGAWA Hirofumi
MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] mmconfig: Reject a broken MCFG tables on Asus etcOGAWA Hirofumi
This rejects broken MCFG tables on Asus. When the table looks bogus just disable mmconfig Arjan and Andi suggested this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] mmconfig: Fix x86_64 ioremap base_addressOGAWA Hirofumi
Current mmconfig has some problems of remapped range. a) In the case of broken MCFG tables on Asus etc., we need to remap 256M range, but currently only remap 1M. b) The base address always corresponds to bus number 0, but currently we are assuming it corresponds to start bus number. This patch fixes the above problems. (akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use it, rather than try to work around things). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64Olivier Galibert
i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13[PATCH] x86-64: x86_64-make-the-numa-hash-function-nodemap-allocation fix fixAmul Shah
- Removed an extraneous debug message from allocate_cachealigned_map - Changed extract_lsb_from_nodes to return 63 for the case where there was only one memory node. The prevents the creation of the dynamic hashmap. - Changed extract_lsb_from_nodes to use only the starting memory address of a node. On an ES7000, our nodes overlap the starting and ending address, meaning, that we see nodes like 00000 - 10000 10000 - 20000 But other systems have nodes whose start and end addresses do not overlap. For example: 00000 - 0FFFF 10000 - 1FFFF In this case, using the ending address will result in an LSB much lower than what is possible. In this case an LSB of 1 when in reality it should be 16. Cc: Andi Kleen <ak@suse.de> Cc: Rohit Seth <rohitseth@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13[PATCH] x86-64: Allocate the NUMA hash function nodemap dynamicallyAmul Shah
Remove the statically allocated memory to NUMA node hash map in favor of a dynamically allocated memory to node hash map (it is cache aligned). This patch has the nice side effect in that it allows the hash map to grow for systems with large amounts of memory (256GB - 1TB), but suffer from having small PCI space tacked onto the boot node (which is somewhere between 192MB to 512MB on the ES7000). Signed-off-by: Amul Shah <amul.shah@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Rohit Seth <rohitseth@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 11:12:31 +0000