aboutsummaryrefslogtreecommitdiff
path: root/arch/xtensa
AgeCommit message (Collapse)Author
2009-07-27mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()Benjamin Herrenschmidt
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-10sched: INIT_PREEMPT_COUNTPeter Zijlstra
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22xtensa: enable m41t80 driver in s6105_defconfigDaniel Glockner
Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22xtensa: add m41t62 rtc to s6105 platformDaniel Glockner
Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22xtensa: enable s6gmac in s6105_defconfigDaniel Glockner
Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Weiner <jw@emlix.com> Cc: Oskar Schirmer <os@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22xtensa: s6105 specific configuration for s6gmacOskar Schirmer
Platform-specific configuration for the s6gmac driver, including the PHY interrupt line. Signed-off-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Weiner <jw@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22xtensa: support s6000 gpio irqs and alternate function selectionDaniel Glöckner
Implement an irq chip to handle interrupts via gpio. The GPIO chip initialization function now takes a bitmask denoting pins that should be configured for their alternate function. changes compared to v1: - fixed bug on edge interrupt configuration - accommodated to function name change - moved definition of VARIANT_NR_IRQS to this patch - renamed __XTENSA_S6000_IRQ_H to _XTENSA_S6000_IRQ_H as requested Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22xtensa: s6000 dma engine supportOskar Schirmer
There are four slightly different dma engines on the s6000 family. One for memory-memory transfers, the other three for memory-device. This patch implements a platform-specific kernel-API to control these engines. It is needed for the network, video, audio peripherals on s6000. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glockner <dg@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22xtensa: allow variant to initialize own irq chipsDaniel Glöckner
There was already a PLATFORM_NR_IRQS define, which is now accompanied by a VARIANT_NR_IRQS. To be able to initialize these interrupts, init_IRQ now calls a variant specific hook. Changes compared to v1: - adapted to new CONFIG_VARIANT_IRQ_EXT - removed definition and call of platform_init_IRQ as there already is a platform_init_irq defined in asm/platform.h with a weak default in kernel/platform.c - renamed variant_init_IRQ to variant_init_irq Note that I could not find the call site of platform_init_irq although it is stated in platform.h that it is called from init_IRQ. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22xtensa: cache inquiry and unaligned cache handling functionsOskar Schirmer
The existing xtensa cache handling functions work on page-aligned memory regions. These functions are needed for the s6000 dma engine which can work on a byte-granularity. Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: Johannes Weiner <jw@emlix.com> Cc: Daniel Glockner <dg@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: remove PT_DTRACE from avr32, mn10300, parisc, s390, sh, xtensaOleg Nesterov
avr32, mn10300, parisc, s390, sh, xtensa: They never set PT_DTRACE, but clear it after do_execve(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Chris Zankel <chris@zankel.net> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16kmap_types: make most arches use generic header fileRandy Dunlap
Convert most arches to use asm-generic/kmap_types.h. Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h, controlled by __WITH_KM_FENCE from each arch's kmap_types.h file. Would be nice to be able to add custom KM_types per arch, but I don't yet see a nice, clean way to do that. Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and 68k(tonyb). Note: avr32 should be able to remove KM_PTE2 (since it's not used) and then just use the generic kmap_types.h file. Get avr32 maintainer approval. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Bryan Wu <cooloney@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16mm: consolidate init_mm definitionAlexey Dobriyan
* create mm/init-mm.c, move init_mm there * remove INIT_MM, initialize init_mm with C99 initializer * unexport init_mm on all arches: init_mm is already unexported on x86. One strange place is some OMAP driver (drivers/video/omap/) which won't build modular, but it's already wants get_vm_area() export. Somebody should look there. [akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: add generic lib/checksum.c asm-generic: add a generic uaccess.h asm-generic: add generic NOMMU versions of some headers asm-generic: add generic atomic.h and io.h asm-generic: add legacy I/O header files asm-generic: add generic versions of common headers asm-generic: make bitops.h usable asm-generic: make pci.h usable directly asm-generic: make get_rtc_time overridable asm-generic: rename page.h and uaccess.h asm-generic: rename atomic.h to atomic-long.h asm-generic: add a generic unistd.h asm-generic: add generic ABI headers asm-generic: add generic sysv ipc headers asm-generic: introduce asm/bitsperlong.h asm-generic: rename termios.h, signal.h and mman.h
2009-06-12module: cleanup FIXME comments about trimming exception table entries.Rusty Russell
Everyone cut and paste this comment from my original one. We now do it generically, so cut the comments. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Amerigo Wang <amwang@redhat.com>
2009-06-11asm-generic: rename page.h and uaccess.hArnd Bergmann
The current asm-generic/page.h only contains the get_order function, and asm-generic/uaccess.h only implements unaligned accesses. This renames the file to getorder.h and uaccess-unaligned.h to make room for new page.h and uaccess.h file that will be usable by all simple (e.g. nommu) architectures. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11asm-generic: rename atomic.h to atomic-long.hArnd Bergmann
The existing asm-generic/atomic.h only defines the atomic_long type. This renames it to atomic-long.h so we have a place to add a truly generic atomic.h that can be used on all non-SMP systems. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-11asm-generic: introduce asm/bitsperlong.hArnd Bergmann
This provides a reliable way for asm-generic/types.h and other files to find out if it is running on a 32 or 64 bit platform. We cannot use CONFIG_64BIT for this in headers that are included from user space because CONFIG symbols are not available there. We also cannot do it inside of asm/types.h because some headers need the word size but cannot include types.h. The solution is to introduce a new header <asm/bitsperlong.h> that defines both __BITS_PER_LONG for user space and BITS_PER_LONG for usage in the kernel. The asm-generic version falls back to 32 bit unless the architecture overrides it, which I did for all 64 bit platforms. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-05-11xtensa: Fix linker script to include .literal sectionsChris Zankel
Fix resembles implementation from Marc Gauthier and Piet Denaly: In the Xtensa architecture, assembly generates literals which must always precede the code (the L32R instruction that loads them only uses negative PC-relative offsets). For any *.text section, literals are placed in a corresponding *.literal section. The linker script (vmlinux.lds) must place these in the correct order. It must also combine them, when the *.text section can be larger than L32R's 256 kB range. For example, this doesn't work: *(.literal) *(.text) because L32R instructions at the end of .text can't reach the literals. The linker can solve this if they are combined in parentheses, like this: *(.literal .text) because it is now allowed mix literals in .text to bring them in range. None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT and INIT_TEXT. To avoid replicating the logic of that header file, we instead post-process the generated linker script to convert *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: .text .ref.text .*init.text .*exit.text .text.* using a sed script. To do this we must override the default rule for vmlinux.lds (see scripts/Makefile.build and the top-level Makefile) to insert this extra step. Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Pete Delaney <piet@tensilica.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: update s6105_defconfig for ccount calibrationOskar Schirmer
The previous patch enabled ccount calibration for the s6000 variant. This patch updates the defconfig for the s6105 platform to reflect this change. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: implement ccount calibration for s6000Oskar Schirmer
Calculate core frequency from timers at boot time instead of assuming a fixed frequency. This is useful as the true frequency is set up by the boot loader, thus variable. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: fix wrong extern declaration renamed in code using itOskar Schirmer
The variable ccount_nsec has been renamed to nsec_per_ccount in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05), but the fix failed to rename the variable in arch/xtensa/include/asm/timex.h as well. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: register gpio chip before useJohannes Weiner
Platform initialization sets up the LED heartbeat that is controlled via GPIO. Requesting the GPIO pins fails, however, as the chip is only initialized later by a device_initcall(). Fix this up by exporting the initialization function. Let the platform set up the chip before it starts using it. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: always use correct stack pointer for stack tracesJohannes Weiner
Commit '28a0ce7 xtensa: use correct stack pointer for stack traces' changed the stack tracer from always reading the stack pointer register to always using the saved value in the task descriptor. The author was too dense to consider the fact that the saved stack value is stale for a running process und thus unusable for 'current'. What we do now is to use the stack pointer register (a1) for when the task is unknown - we can't help it then - or when the task is 'current'. For everything else use the saved stack pointer value contained in the task descriptor. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: Fix checksum header fileChris Zankel
We need to add a "memory" dependency (barrier) in assembly macros that access (read or write) memory. Otherwise, the compiler might ill-optimize the order of memory accesses. Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11xtensa: Fix architecture specific KconfigChris Zankel
Move a misplace endmenu marker to enable platform options and disable PCI and automatic calibrating for the XT2K board. The on-board PCI bridge is somewhat broken, anyway, and the calibrating relies on some whacky usage of the serial port. Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-26xtensa: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott
Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Chris Zankel <chris@zankel.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-05Merge branch 'tracing-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
2009-04-03Merge branch 'master' of ↵Chris Zankel
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into merge
2009-04-03xtensa: we don't need to include asm/io.hChris Zankel
Remove include statement to include asm/io.h. Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-03xtensa: only build platform or variant if they contain a MakefileChris Zankel
We only add the platform or variant directory to core-y if it contains a Makefile. Consequently, we can remove the Makefiles for the dc232b and fsf processor variants. Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: make startup code discardableDaniel Glöckner
Move it from .text to .init.text to get rid of it after boot and prevent illegal section references. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: ccount clocksourceJohannes Weiner
Switch to GENERIC_TIME by using the ccount register as a clock source. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: remove platform rtc hooksJohannes Weiner
platform_get/set_rtc_time() is not implemented by any of the supported xtensa platforms. Remove the facility completely. The initial seconds for xtime come from read_persistent_clock() which returns just 0 in the generic implementation. Platforms that sport a persistent clock can implement this function. This is needed to implement the ccount as a clock source. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: use generic sched_clock()Johannes Weiner
Current xtensa implementation of sched_clock() is the same as the generic one. Just remove it, the weak symbol in kernel/sched_clock.c will be used instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: platform: s6105Johannes Weiner
Support for the S6105 IP Camera Reference Design Kit. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: let platform override KERNELOFFSETJohannes Weiner
The linker script should not assume a fix offset in memory for the kernel, this is platform-specific, so let the platform set it. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: s6000 variantJohannes Weiner
Support for the Stretch S6000 Xtensa core variant. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: s6000 variant core definitionsJohannes Weiner
S6000 core configuration files from Tensilica. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: variant irq set callbacksJohannes Weiner
Allow the core variant code to provide irq enable/disable callbacks. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: variant-specific codeJohannes Weiner
Allow the variant to provide real code. Add empty dummy Makefiles for the existing variants. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: nommu supportJohannes Weiner
Add support for !CONFIG_MMU setups. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: add flat supportOskar Schirmer
Add the arch-specific header for flat support on xtensa in preparation for the Xtensa S6000 nommu port. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: enforce slab alignment to maximum register widthOskar Schirmer
XCHAL_DATA_WIDTH is the maximum register width, slab caches should be aligned to this. Theoretical fix as all variants have had an XCHAL_DATA_WIDTH of 4 (wordsize) for now. But the S6000 variant will raise this to 16. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: cope with ram beginning at higher addressesJohannes Weiner
The current assumption of the memory code is that the first RAM PFN in the system is 0. Adjust the relevant code to play well with setups where memory starts at higher addresses, indicated by PLATFORM_DEFAULT_MEM_START. The new memory model looks like this: +----------+--+----------------------+----------------+ | | | | | | | | RAM | | | | | | | +----------+--+----------------------+----------------+ | | | | | +- PFN 0 | +- min_low_pfn +- max_low_pfn +- max_pfn | +- ARCH_PFN_OFFSET +- PLATFORM_DEFAULT_MEM_START >> PAGE_SIZE The memory map contains pages starting from pfn ARCH_PFN_OFFSET up to max_low_pfn. The only zone used right now will span exactly the same region. Usually, ARCH_PFN_OFFSET and min_low_pfn are the same value. Handle them separately for robustness. Gapping pages will be in the memory map but marked as reserved and won't be touched. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: don't make bootmem bitmap larger than requiredJohannes Weiner
If min_low_pfn is non-zero, the bitmap reserved for bootmem is bigger than needed. The number of pages bootmem has to maintain is the range from min_low_pfn to max_low_pfn. For now it has only been a theoretical mistake, min_low_pfn was always zero. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: fix init_bootmem_node() argument orderJohannes Weiner
The second argument to init_bootmem_node() is the PFN to place the bootmem bitmap at and the third argument is the first PFN on the node. This is currently backwards but never made any problems as both values were always zero. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02xtensa: use correct stack pointer for stack tracesJohannes Weiner
Right now, the xtensa stacktrace code reads the _current_ kernel stack pointer if nothing is supplied. With debugging facilities like sysrq this means that the backtrace of the sysrq-handler is printed instead of a trace of the given task's stack. When no stack pointer is specified in show_trace() and show_stack(), use the stack pointer that comes with the handed in task descriptor to make stack traces more useful. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net>