aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-12-16[ARM] pcm037: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX3: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm038: Add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX27: Add NAND resourcesSascha Hauer
This patch adds the platform device and resources for NAND on mx27 boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16Add default configuration for MX31PDK board.Fabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16Add basic support for MX31PDK board.Fabio Estevam
Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm037: Add support for SRAM deviceSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm037: add support for the on-board LAN9217 network controllerGuennadi Liakhovetski
smc911x now also supports LAN921{5,7,8} network controllers. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16pcm038: add driver for static ramSascha Hauer
The pcm038 module (phyCORE-i.MX27) comes with a 512 KiB static RAM which can be battery buffered. Add mtd_ram support and configure the chip select line, to which the sram is attached. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX31: fix mxc_iomux_set_pad()Guennadi Liakhovetski
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and the offset therein wrongly. Fix it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX3 iomux: add more pin definitionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX1/MX2: simplify mxc_gpio_setup_multiple_pinsSascha Hauer
mxc_gpio_setup_multiple_pins used to take several ALLOC_MODE flags. Most of them are unused, so simplify the function by removing the flags. Also, instead of using a confusing MXC_GPIO_ALLOC_MODE_RELEASE flag in a function having alloc in its name, add a mxc_gpio_release_multiple_pins function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX27: add i.MX27 SDHC1 and SDHC2 GPIO declarationsJulien Boibessot
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16MX27: Add USB pin function definesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX27ads: remove unused defineSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX2: Add IRQ_GPIOE definitionSascha Hauer
The MX2 has 5 gpio ports, IRQ_GPIOE was missing so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16MX27: Fix EMMA Base addressesSascha Hauer
The EMMA (Enhanced Multimedia Engine) is divided into two parts, the postprocessor and the preprocessor. Fix the base addresses. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX2: DMA updatesSascha Hauer
This one updates DMA support on MX2 which got broken in: [ARM] Hide ISA DMA API when ISA_DMA_API is unset Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-15Merge branch 'for_rmk' of git://git.mnementh.co.uk/linux-2.6-im into develRussell King
2008-12-15[ARM] pxa: Add multi-io support for e-seriesIan Molton
This patchset provides support for the TMIO based IO controller used in the Toshiba e-series PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Eric Miao <eric.y.miao@gmail.com>
2008-12-14[ARM] move asm/xip.h's mach/hardware.h include to mach/xip.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] pcm037: add 1wire supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] MX2 pcm038: add 1-wire master supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] MX31: add w1 platform_device and resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] MX2: Add W1 device/resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] DSM320: Update KS8695 defconfig to include DSM320Daniel Silverstone
Update the KS8695 defconfig to bring it up to modern config standards and include the DSM320 and appropriate drivers for the DSM320 (E.g. prism54). Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14[ARM] DSM320: Add support for the DSM320Daniel Silverstone
Add support for the D-Link DSM-320 Wireless Media Player which is based on the Micrel KS8695 SoC. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14[ARM] KS8695: Add GPIO to IRQ mapping functionBen Dooks
Use the GPIOlib .to_irq call to map KS8695 GPIOs to the relevant IRQ line. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14[ARM] KS8695: Fixup the KS8695 GPIO to be GPIOLIBDaniel Silverstone
This patch is as small a change as possible to the KS8695 GPIO layer to use GPIOLIB to allow the generic GPIO expanders and the like to be compiled. As a side-effect, we also remove __init_or_module from several functions which could be called by drivers such as i2c-gpio which could plausibly be compiled into a non-modular kernel. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14[ARM] KS8695: Fix up device registration.Daniel Silverstone
The KS8695 device.c provides registration functionality for the KS8695's various devices such as watchdog timers and ethernet devices. Rather than predicating those on the config options for the drivers, always register the platform devices so that a later built module can hook on. Also, the ethernet used to register virtual addresses in the platform data. This is wrong and so this patch changes them to physical addresses and also passes in the appropriate physical region for the PHY or Switch as appropriate. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-13[ARM] fix xm_x2xx_defconfig build errorsRussell King
drivers/built-in.o: In function `pci_set_consistent_dma_mask': hid-quirks.c:(.text+0x2664): multiple definition of `pci_set_consistent_dma_mask' drivers/built-in.o: In function `pci_set_dma_mask': hid-quirks.c:(.text+0x42c4): multiple definition of `pci_set_dma_mask' because drivers/pci/pci.c was not seeing the definition disabling these functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] 5343/1: ep93xx: include linux/i2c.hHartley Sweeten
Include <linux/i2c.h> in all ep93xx platforms. Patch "5311/1: add core support for built in i2c bus" will cause build errors due to the following in arch/arm/mach-ep93xx/include/mach/platform.h: +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); The i2c.h header needs to be included in order to define struct i2c_board_info. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] 5342/1: ep93xx: platform init cleanupHartley Sweeten
Use EP93XX_*_PHYS_BASE and SZ_* defines in ep93xx platform inits. The following patch changes the flash memory hard-coded resource addresses and MACHINE_START boot_params to EP93XX_*_PHYS_BASE and SZ_* defines to improve readability. Also some minor whitespace cleanup resulting from previous patches. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] 5337/1: gumstix: move am200 specific gpio pins into am200epd.Jaya Kumar
The gpio setup for AM200 specific GPIO pins should be done in the AM200 code rather than in generic gumstix code. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] dma: correct dma_supported() implementationRussell King
dma_supported() is supposed to indicate whether the system can support the DMA mask it was passed, which depends on the maximal address which can be returned for DMA allocations. If the mask is smaller than that, we are unable to guarantee that the driver can reliably obtain suitable memory. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] netwinder: clean up GPIO namingRussell King
Netwinder was using gpio_xxx names which could clash with the GPIO layer. Add a 'nw_' prefix to ensure that these remain separate. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11[ARM] Kirkwood: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11[ARM] Feroceon: pass proper -mtune argument to gccNicolas Pitre
Compilation for the Feroceon core should use -mtune=marvell-f. This is available in Code Sourcery's 2008Q3 release at the moment. Otherwise fall back to -mtune-=xscale. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11[ARM] Kirkwood: properly handle the WAN port on newer RD88F6281 boardsRonen Shitrit
On newer versions of the RD88F6281 board, the WAN port is connected to its own ethernet port on the CPU, via a separate PHY, whereas on older versions of the board, it is connected to one of the PHYs in the ethernet switch. In the RD8F6281 setup code, detect which version of the board we are running on, and instantiate the ethernet ports and switch driver accordingly. Signed-off-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11[ARM] Kirkwood: allow instantiating the second ethernet portRonen Shitrit
The 88f6192 and 88f6281 Kirkwood SoCs support two ethernet ports. Add the platform glue that will allow board support files to instantiate the second ethernet port. Signed-off-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11[ARM] DNS323: Initialise 88F5182 correctlyMatt Palmer
The 88F5182 found in the DNS-323 rev B1 (and some other devices, such as the CH3SNAS) require different initialisation of the SATA controller and MPP registers. Tested on a DNS-323 rev B1. Signed-off-by: Matt Palmer <mpalmer@hezmatt.org>
2008-12-11[ARM] DNS323: Read MAC address from flashMatt Palmer
Based on similar code from the tsx09 series of machines, just rips the MAC address out of flash and stuffs it into the NIC. Tested on a DNS323 rev B1. It's possible (though unlikely) that an A1 will have the MAC in a different location in flash. Signed-off-by: Matt Palmer <mpalmer@hezmatt.org>
2008-12-10ARM: OMAP3: Pin multiplexing updates for 24xx and 34xxArun KS
This patch adds some new pin multiplexing options for McBSP and McSPI from Arun KS. Also add two more GPIOs from David Brownell. Also mark omap24xx_cfg_reg() static. Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Add basic support for Pandora handheld consoleGrazvydas Ignotas
This patch adds support for basic features: uarts, i2c, and rtc. Also includes defconfig. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: DMA: Fix for sDMA Errata 1.113Santosh Shilimkar
SDMA channel is not disabled after transaction error. So explicitly disable it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked By : Nishant kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao
Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2008-12-10ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helperJarkko Nikula
- Simplify function omap_i2c_mux_pins - Add OMAP34xx pin multiplexing for busses 1 - 3 Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 13:52:41 +0000