aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2006-08-31[ARM] 3764/1: S3C24XX: change type naming to kernel styleBen Dooks
Patch from Ben Dooks The type naming in the s3c24xx dma code is riddled with typedefs creating _t types, from the code import from 2.4 which is contrary to the current Kernel coding style. This patch cleans this up, removing the typedefs and and fixing up the resultant code changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-31[ARM] 3763/1: add both rtcs to csb337 defconfigDavid Brownell
Patch from David Brownell This adds RTC support to the csb337 default config. Both the AT91 and the ds1307 RTCs are enabled (rtc0 and rtc1 respectively). The ds1307 is used to initialize the system time, since it's battery-backed. From then on the AT91 RTC is used, since it's more capable (with both alarm and update irqs, and system wakeup capability) even though it needs manual initialization (symlink /dev/rtc to /dev/rtc0 for older versions of hwclock, then "hwclock --systohc") in an rc script or from inittab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-30[ARM] 3750/3: Fix double VFP emulation for EABI kernelsDaniel Jacobowitz
Patch from Daniel Jacobowitz vfp_put_double didn't work in a CONFIG_AEABI kernel. By swapping the arguments, we arrange for them to be in the same place regardless of ABI. I made the same change to vfp_put_float for consistency. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers [ARM] Add Integrator support for glibc outb() and friends [ARM] Move prototype for register_isa_ports to asm/io.h [ARM] Arrange for isa.c to use named initialisers [ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems [ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en [ARM] 3758/1: Preserve signalling NaNs in conversion [ARM] 3749/3: Correct VFP single/double conversion emulation [ARM] 3748/3: Correct error check in vfp_raise_exceptions
2006-08-28[ARM] 3761/1: fix armv4t breakage after adding thumb interworking to ↵Lennert Buytenhek
userspace helpers Patch from Lennert Buytenhek On armv4t systems, we have always compiled the kernel with -march=armv4 instead of -march=armv4t, which means that any use of bx will bomb out. Commit ba9b5d76372dc290b6ca04dad93927a22c2ac49a introduced the use of bx in the kernel, which means we need to compile with -march=armv4t on armv4t systems now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Add Integrator support for glibc outb() and friendsRussell King
Add the necessary call to register_isa_ports() so that glibc knows where these are found on Integrator platforms. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Move prototype for register_isa_ports to asm/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Arrange for isa.c to use named initialisersRussell King
Convert isa.c (the glibc interface for emulating ISA IO) to use named initialisers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[PATCH] x86: NUMAQ Kconfig fixKAMEZAWA Hiroyuki
When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] cpufreq: acpi-cpufreq: Ignore failure from acpi_cpufreq_early_init_acpiDave Jones
Ignore the return value of early_init_acpi(), as it can give false error messages. If there is something really wrong, then register_driver will fail cleanly with EINVAL later. [ background: modprobe acpi-cpufreq on systems not capable of speed-scaling started failing with 'invalid argument', where previously it would only ever -ENODEV I'm not 100% happy with the solution. It'd be better to handle failure properly, but this is a low-impact change for 2.6.18 We can always revisit doing this better in .19 --davej.] Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systemsDavid Brownell
Patch from David Brownell Remove buld warning when building sa1111 on non-sa1100 platforms (e.g. PXA). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3760/1: This patch adds timeouts while working with SSP registers. ↵Paul Sokolovsky
Such timeouts were en Patch from Paul Sokolovsky This patch adds timeouts while working with SSP registers. Such timeouts were envisioned by docstrings in ssp.c, but were not implemented. There were actual lockups while accessing touchscreen for iPaqs h1910, h4000 due to lack of the timeouts. This is updated version of previously submitted patch: 3738/1. Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3758/1: Preserve signalling NaNs in conversionDaniel Jacobowitz
Patch from Daniel Jacobowitz The fcvtds and fcvtsd instructions were generating a qnan bit pattern for both quiet and signalling NaNs. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3749/3: Correct VFP single/double conversion emulationDaniel Jacobowitz
Patch from Daniel Jacobowitz The fcvtsd/fcvtds emulation was left behind when the numbering of double precision registers was changed from 0-30 to 0-15. Both conversion instructions were writing their results to the wrong register. Also, the conversion instructions should stop after the first element even if a vector length is specified. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3748/3: Correct error check in vfp_raise_exceptionsDaniel Jacobowitz
Patch from Daniel Jacobowitz The recent fix to hide VFP_NAN_FLAG broke the check in vfp_raise_exceptions; it would attempt to deliver an exception mask of 0xfffffeff instead of reporting a serious error condition using printk. Define a safe constant to use for an invalid exception maskm, and use it at both ends. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-26[SPARC]: Small smp cleanup.Krzysztof Helt
It moves the smp_procesors_ready variable to sun4d_smp.c only. Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl) Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-26[SPARC]: enabling of the 2nd CPU in 2.6.18-rc4Krzysztof Helt
smp_setup_cpu_possible_map() needs to run after paging_init() so that the in-kernel device tree is setup. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-26[PATCH] PCI: i386 mmconfig: don't forget bus number when setting ↵Daniel Ritz
fallback_slots bits On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26[PATCH] PCI: use PCBIOS as last fallbackDaniel Ritz
there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Greg Kroah-Hartman
2006-08-23Merge branch 'upstream-greg' of ↵Greg Kroah-Hartman
gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-08-23Merge branch 'merge' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
2006-08-24[POWERPC] hugepage BUG fixAdam Litke
On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote: > kernel BUG in cache_free_debugcheck at mm/slab.c:2748! Alright, this one is only triggered when slab debugging is enabled. The slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary. The free path makes use of this assumption and uses the lowest nibble to pass around an index into an array of kmem_cache pointers. With slab debugging turned on, the slab is still aligned, but the "working" object pointer is not. This would break the assumption above that a full nibble is available for the PGF_CACHENUM_MASK. The following patch reduces PGF_CACHENUM_MASK to cover only the two least significant bits, which is enough to cover the current number of 4 pgtable cache types. Then use this constant to mask out the appropriate part of the huge pte pointer. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix compile problem without CONFIG_PCILi Yang
Compile fails without defining CONFIG_PCI. The patch fix this. [paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef] Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Correct masks used in emulating some instructionsPaul Mackerras
When we get an illegal instruction exception, we check to see whether the instruction is one that we emulate for the user program. Some of the masks we use in checking whether the offending instruction is one we care about didn't have the top bit set, which is the MSB of the major opcode. Thus some undefined opcodes could get emulated as other (defined but unimplemented) instructions. This corrects the masks. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Pass UPIO_TSI flag to 8259 serial driverZang Roy-r61911
The patch passes the UPIO_TSI flag to general 8259 serial driver Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Update mpc7448hpc2 board irq support using device treeZang Roy-r61911
The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix BootX booting with an initrdBenjamin Herrenschmidt
The bootx_init.c trampoline didn't properly add the ramdisk to the "reserve map" (list of reserved areas of memory), thus causing all sorts of failures when using BootX with an initrd. Also fixes a possible problem if the ramdisk is located before the device-tree passed by BootX. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix gettimeofday inaccuraciesNathan Lynch
There are two problems in the powerpc gettimeofday code which can cause incorrect results to be returned. The first is that there is a race between do_gettimeofday and the timer interrupt: 1. do_gettimeofday does get_tb() 2. decrementer exception on boot cpu which runs timer_recalc_offset, which also samples the timebase and updates the do_gtod structure with a greater timebase value. 3. do_gettimeofday calls __do_gettimeofday, which leads to the negative result from tb_val - temp_varp->tb_orig_stamp. The second is caused by taking the boot cpu offline, which can cause the value of tb_last_jiffy to be increased past the currently available timebase, causing the same underflow as above. [paulus@samba.org - define and use data_barrier() instead of mb().] Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix FEC node in 8540 ADS dtsAndy Fleming
* Fixed the FEC node, and its accompanying PHY * Fixed a spacing issue in the PIC node Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device TreeJon Loeliger
IRQ setup now comes from the Flat Device Tree and use the new generic IRQ code. Fixed the fsl_soc.c IRQ OF interrupt node parsing. Removed some unused MPC86xx macro definition. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 919fede6edab94cccb3ca8c1c0b32fa62c9369a5 commit)
2006-08-23[POWERPC] Add 85xx DTS files to powerpcAndy Fleming
Added the mpc85xx family of dts files to the powerpc tree Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix CDS IRQ handling and PCI codeAndy Fleming
* Fix IRQ support in the 85xx CDS boards so it uses the new generic stuff * Fix PCI IRQ mapping to use the device tree * Disabled i8259 support to allow the CDS to boot. This will be fixed soon, but the current code doesn't even compile, so this is a vast improvement Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Fix interrupts on 8540 ADS boardAndy Fleming
* Fixed 8540 ADS support for the new irq layer * Fixed 8540 ADS support for mapping PCI interrupts * Updated 8540 ADS to use device tree for interrupt assignment and sense values Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-21Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-armGreg Kroah-Hartman
2006-08-20Merge trivial low-risk suspend hotkey bugzilla-5918 into releaseLen Brown
2006-08-19[PATCH] ppc32: board-specific part of fs_enet updateVitaly Bordug
This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Changes to the mpc8560ads ppc/ code are also introduced, but mainly as reference, since the entire board support is going to appear in arch/powerpc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-18ACPI: relax BAD_MADT_ENTRY check to allow LSAPIC variable length string UIDsStarikovskiy, Alexey Y
ACPI 3.0 appended a variable length UID string to the LAPIC structure as part of support for > 256 processors. So the BAD_MADT_ENTRY() sanity check can no longer compare for equality with a fixed structure length. Signed-off-by: Alexey Y Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-18[ARM] 3746/2: Userspace helpers must be Thumb mode interworkableNicolas Pitre
Patch from Nicolas Pitre The userspace helpers in clean/arch/arm/kernel/entry-armv.S are called directly in/from userspace. They need to cope with being called from Thumb code. Patch below uses the bx interworking instruction when CONFIG_ARM_THUMB=y. Based on an earlier patch from Paul Brook <paul@codesourcery.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18Merge branch 'merge' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
2006-08-18[ARM] 3757/1: Use PROCINFO_INITFUNC in head.SCatalin Marinas
Patch from Catalin Marinas This is instead of a magic number. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18[ARM] 3755/1: dmabounce: fix return value for find_safe_bufferKevin Hilman
Patch from Kevin Hilman Previous locking changes to dmabounce incorrectly return non-NULL even when buffer not found. Fix it up. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18[ARM] 3754/1: S3C24XX: tidy arch/arm/mach-s3c2410/MakefileBen Dooks
Patch from Ben Dooks tidy up the makefile by using TABs to indent, and ensure that all items are indented the same. Move the DMA to its own section, ready for the next set of updates Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18[ARM] 3753/1: S3C24XX: DMA fixesBen Dooks
Patch from Ben Dooks A number of small issues with the S3C24XX DMA have cropped up, which this patch fixes. These are: - check wether we can load another buff in start - update state handling in s3c2410_dma_lastxfer - only reload in irq if channel is not idle - more informative timeout errors (add source) - do not call request_irq() with irqs locked - added waitforstop function The patch also adds a S3C2410_DMAOP_STARTED for the occasions when the driver wants to ensure that the DMA system load state is resynced after loading. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18[POWERPC] Fix the mpc8641_hpcn.dts file.Jon Loeliger
Add 'linux,phandle' entry to i8259@4d0 node. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Offer PCI as a CONFIG choice for PPC_86xx.Jon Loeliger
Also fix 80-column run-over. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Add MPC8641 HPCN Device Tree Source file.Jon Loeliger
As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Convert to mac-address for ethernet MAC address data.Jon Loeliger
Also accept "local-mac-address". However the old "address" is now obsolete, but accepted for backwards compatibility. It should be removed after all device trees have been converted to use "mac-address". Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] powerpc: Clear HID0 attention enable on PPC970 at boot timeOlof Johansson
Clear HID0[en_attn] at CPU init time on PPC970. Closes CVE-2006-4093. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] Fix irq radix tree remapping typoBenjamin Herrenschmidt
The code for using the radix tree for reverse mapping of interrupts has a typo that causes it to create incorrect mappings if the software and hardware numbers happen to be different. This would, among others, cause the IDE interrupt to fail on js20's. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 04:56:06 +0000