aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-03-23ARM: OMAP3: mmc-twl4030 fix for vmmc = 0David Brownell
Resolve longstanding issue noted by Adrian Hunter: confusion between settting VSEL=0 (which is 1.8V on MMC1) and poweroff. Also, leave VSEL alone if we're just powering the regulator off. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: mmc-twl4030 add MMC3 support, v2Grazvydas Ignotas
Device connected to MMC3 is assumed to be self-powered, so set_power() function is empty. It can't be omited because host driver requires it. Array size for hsmmc[] is specified to allocate to allocate an instance for the third MMC controller. Also fix a leak which happens if invalid controller id is passed. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: mmc-twl4030 init passes device nodes back, v2David Brownell
When setting up HSMMC devices, pass the device nodes back so board code can linking them to their power supply regulators. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: mmc-twl4030 voltage cleanupDavid Brownell
Correct twl4030 MMC power switching: fix voltage ranges reported for each slot, and handle them fully. Lies corrected: - MMC-1 doesn't support the 2.6-2.7 Volt range - MMC-2 can't normally support anything except 1.8V Omissions corrected - MMC-1 *does* handle the 2.8-2.9 Volt range - MMC-2 can handle 2.5-3.2 Volt cards, given a transceiver Add transciever support for MMC-2; enable it for Overo and Pandora. (Depends on something else to have set up pinmuxing for control signals instead of as MMC2_DAT4..7 pins.) Also shrink twl4030_hsmmc_info a smidgeon ... padding is all gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: mmc-twl4030 fix name buffer length, v2Adrian Hunter
Add 1 to buffer length for null terminator and use snprintf. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: Add more GPIO mux optionsTony Lindgren
This patch adds several new GPIO pins and updates the pin naming comments. The patch is based on earlier patches on linux-omap list by Manikandan Pillai <mani.pillai@ti.com>, Vaibhav Hiremath <hvaibhav@ti.com> and David Brownell <dbrownell@users.sourceforge.net>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP3: Remove unused CONFIG_I2C2_OMAP_BEAGLEJarkko Nikula
There is no CONFIG_I2C2_OMAP_BEAGLE in mainline and it is under removal in linux-omap also so remove this dead code now. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: get rid of OMAP_TAG_USB, v2Felipe Balbi
OMAP_TAGS should vanish soon since they're not generic arm tags. Most of them can be converted to a platform_data or parsed from a command line like e.g. serial tag. For OMAP_TAG_USB we just let boards call omap_usb_init() passing a pointer to omap_usb_config. Patch updated by Tony for mainline, basically make n770 and h4 compile. Also folded in a fix for OSK by David Brownell <dbrownell@users.sourceforge.net>. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Dispatch only relevant DMA interruptsSantosh Shilimkar
This fixes the spurious interrupt issue on a DMA channel. In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers. Since there are four sDMA interrupt lines and if more than one line is actively used by two concurrently running sDMA softwares modules,then the spurious interrupt can be observed on the other lines. Fix in this patch will only dispatch the relevant and enabled interrupts on a particular line thus perevting spurious IRQ. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Get available DMA channels from cmdlineSantosh Shilimkar
This patch set up a cmdline option for omap dma for masking the available channels. It is needed since the OMAP DMA is a system wide resource and can be used by another software apart from the kernel. To reserve the omap SDMA channels for kernel dma usage, use cmdline bootarg "omap_dma_reserve_ch=". The valid range is 1 to 32. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Add method to register additional I2C busses on the command line, v2Jarkko Nikula
This patch extends command line option "i2c_bus=bus_id,clkrate" so that it allow to register additional I2C busses that are not registered with omap_register_i2c_bus from board initialization code. Purpose of this is to register additional board busses which are routed to external connectors only without any on board I2C devices. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Add command line option for I2C bus speed, v2Jarkko Nikula
This patch adds a new command line option "i2c_bus=bus_id,clkrate" into I2C bus registration helper. Purpose of the option is to override the default board specific bus speed which is supplied by the omap_register_i2c_bus. The default bus speed is typically set to speed of slowest I2C chip on the bus and overriding allow to use some experimental configurations or updated chip versions without any kernel modifications. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Add documentation for function omap_register_i2c_busJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Export dmtimer functionsTimo Kokkonen
Make the dmtimer function symbols available so modules can take use of them. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23[OMAP850] Build system changesZebediah C. McClure
Build system changes. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23[OMAP850] IRQ related changesZebediah C. McClure
IRQ related changes. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23[OMAP850] Changes to memory subsystemZebediah C. McClure
Changes to memory subsystem. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23[OMAP850] Changes to base IO subsystem, v2Zebediah C. McClure
Changes to base IO subsystem. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23[OMAP850] Add base support for omap850 cpuZebediah C. McClure
Add base support for omap850 cpu. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: Remove remaining board-*.h includes from hardware.hTony Lindgren
Also remove board-omap3beagle.h that is not included anywhere, and move protoype for voiceblue_reset() from board-voiceblue.h to system.h. After this patch there are still board-ams-delta.h, board-sx1.h and board-voiceblue.h that export some functions. These could be removed if the functions were moved under drivers. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-nokia.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-overo.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-ldp.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Also rename OMAP34XX_ETHR_START to LDP_ETHR_START. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-h4.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Also rename OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-apollon.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-omap2430sdp.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header file. Also rename SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-palm*.h from hardware.hTony Lindgren
Move the defines to the associated board file and remove the now unnecessary header files. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-osk.h from hardware.hTony Lindgren
Move the defines to the board file and remove the now unnecessary header file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-innovator.h from hardware.hTony Lindgren
Move the defines to the board file and remove the now unnecessary header file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-h3.h from hardware.hTony Lindgren
Also move board-h3.h to mach-omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-h2.h from hardware.hTony Lindgren
Also move board-h2.h to mach-omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23ARM: OMAP: No need to include board-perseus2.h or board-fsample.h from ↵Tony Lindgren
hardware.h Move defines to the board file and remove the now unnecessary headers. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23omap mailbox: remove unnecessary header file inclusionHiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: convert sequence bit checking to module paramterHiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: move mailbox.h into mailbox.cHiroshi DOYU
no need to keep mailbox.h separately. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: add save_/restore_ctx() for PMHiroshi DOYU
To preserve the registers during off-mode Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: fix empty struct device for omap2Hiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: fix empty struct device for omap1Hiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: fix empty struct device for omap_mboxHiroshi DOYU
Since "mbox->dev" doesn't exist and isn't created either at registration, this patch will create "struct device", which belongs to "omap-mailbox" class and set this pointer for the member of "struct omap_mbox". Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: print hardware revision at startupHiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: add initial omap3 supportHiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23omap mailbox: cleanup omap2 register definition with macroHiroshi DOYU
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
2009-03-23Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
2009-03-23powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machinesKumar Gala
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93c3f14691c8a29e53eb04dc734b27f0db) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22Merge branch 'fix-includes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h
2009-03-19Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] make page table upgrade work again [S390] make page table walking more robust [S390] Dont check for pfn_valid() in uaccess_pt.c [S390] ftrace/mcount: fix kernel stack backchain [S390] topology: define SD_MC_INIT to fix performance regression [S390] __div64_31 broken for CONFIG_MARCH_G5
2009-03-18Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-03-18sparc64: Fix crash with /proc/iomemMikulas Patocka
When you compile kernel on Sparc64 with heap memory checking and type "cat /proc/iomem", you get a crash, because pointers in struct resource are uninitialized. Most code fills struct resource with zeros, so I assume that it is responsibility of the caller of request_resource to initialized it, not the responsibility of request_resource functuion. After 2.6.29 is out, there could be a check for uninitialized fields added to request_resource to avoid crashes like this. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18sparc64: Reschedule KGDB capture to a software interrupt.David S. Miller
Otherwise it might interrupt switch_to() midstream and use half-cooked register window state. Reported-by: Chris Torek <chris.torek@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 13:00:38 +0000