aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-12-16powerpc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Remove flush_HPTE()Benjamin Herrenschmidt
The function flush_HPTE() is used in only one place, the implementation of DEBUG_PAGEALLOC on ppc32. It's actually a dup of flush_tlb_page() though it's -slightly- more efficient on hash based processors. We remove it and replace it by a direct call to the hash flush code on those processors and to flush_tlb_page() for everybody else. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Rename tlb_32.c and tlb_64.c to tlb_hash32.c and tlb_hash64.cBenjamin Herrenschmidt
This renames the files to clarify the fact that they are used by the hash based family of CPUs (the 603 being an exception in that family but is still handled by that code). This paves the way for the new tlb_nohash.c coming via a subsequent commit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Add local_flush_tlb_mm() to SW loaded TLB implementationsBenjamin Herrenschmidt
This adds a local_flush_tlb_mm() call as a pre-requisite for some SMP work for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix asm EMIT_BUG_ENTRY with !CONFIG_BUGBenjamin Herrenschmidt
Instead of not defining it at all, this defines the macro as being empty, thus avoiding ifdef's in call sites when CONFIG_BUG is not set. Also removes an extra whitespace in the existing definition. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove dead BIO_VMERGE_BOUNDARY definitionFUJITA Tomonori
The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY definition is meaningless now (For POWER, BIO_VMERGE_BOUNDARY has been meaningless for a long time since POWER disables the virtual merge feature). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Introduce ppc_pci_flags accessorsJosh Boyer
Currently there are a number of platforms that open code access to the ppc_pci_flags global variable. However, that variable is not present if CONFIG_PCI is not set, which can lead to a build break. This introduces a number of accessor functions that are defined to be empty in the case of CONFIG_PCI being disabled. The various platform files in the kernel are updated to use these. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/pseries: Check for GIQ indicator before calling set-indicatorNathan Lynch
Since "Factor out cpu joining/unjoining the GIQ" (b4963255ad5a426f04a0bb15c4315fa4bb40cde9) the WARN_ON in xics_set_cpu_giq() is being triggered during boot on JS20 because the GIQ indicator is not available on that platform. While the warning is harmless and the system runs normally, it's nicer to check for the existence of the indicator before trying to manipulate it. Implement rtas_indicator_present(), which searches the /rtas/rtas-indicators property for the given indicator token, and use this function in xics_set_cpu_giq(). Also use a WARN statement in xics_set_cpu_giq to get better information on failure. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/powermac: Use set_hard_smp_processor_id() instead of smp_hw_indexNathan Lynch
The hard_smp_processor_id functions are the appropriate interfaces for managing physical CPU ids. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Move smp_hw_index to 32-bit codeNathan Lynch
smp_hw_index isn't used on 64-bit, so move it from smp.c to setup_32.c. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove `have_of' global variableAnton Vorontsov
The `have_of' variable is a relic from the arch/ppc time, it isn't useful nowadays. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix !CONFIG_PPC_NEED_DMA_SYNC_OPS build warningBecky Bruce
Change #define stubs of dma_sync ops to be empty static inlines to avoid build warning. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Add sub-match id modalias supportGeert Uytterhoeven
commit 059e4938f8b060b10c4352e6c45739473bc73267 ("powerpc/ps3: Add a sub-match id to ps3_system_bus") forgot to update the module alias support: - Add the sub-match ids to the module aliases, so udev can distinguish between different types of sub-devices. - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb binds to the "FB" sub-device. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Quiet dmesg outputGeoff Levand
Change the debug message in dma_sb_region_create() from pr_info() to DBG() to quiet the dmesg output. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix typo in pgtable-ppc64.hGeoff Levand
Fix a minor comment typo in pgtable-ppc64.h. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/chrp: Add missing of_node_put in pci.cNicolas Palix
of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code or when the device node is no longer used. The semantic match that catches the bug is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression struct device_node *n; position p1, p2; statement S1,S2; expression E,E1; expression *ptr != NULL; @@ ( if (!(n@p1 = of_find_node_by_name(...))) S1 | n@p1 = of_find_node_by_name(...) ) <... when != of_node_put(n) when != if (...) { <+... of_node_put(n) ...+> } when != true !n || ... when != n = E when != E = n if (!n || ...) S2 ...> ( return \(0\|<+...n...+>\|ptr\); | return@p2 ...; | n = E1 | E1 = n ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Nicolas Palix <npalix@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-16powerpc/cell/axon-msi: Fix MSI after kexecArnd Bergmann
Commit d015fe995 'powerpc/cell/axon-msi: Retry on missing interrupt' has turned a rare failure to kexec on QS22 into a reproducible error, which we have now analysed. The problem is that after a kexec, the MSIC hardware still points into the middle of the old ring buffer. We set up the ring buffer during reboot, but not the offset into it. On older kernels, this would cause a storm of thousands of spurious interrupts after a kexec, which would most of the time get dropped silently. With the new code, we time out on each interrupt, waiting for it to become valid. If more interrupts come in that we time out on, this goes on indefinitely, which eventually leads to a hard crash. The solution in this commit is to read the current offset from the MSIC when reinitializing it. This now works correctly, as expected. Reported-by: Dirk Herrendoerfer <d.herrendoerfer@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix bootmem reservation on uninitialized nodeDave Hansen
careful_allocation() was calling into the bootmem allocator for nodes which had not been fully initialized and caused a previous bug: http://patchwork.ozlabs.org/patch/10528/ So, I merged a few broken out loops in do_init_bootmem() to fix it. That changed the code ordering. I think this bug is triggered by having reserved areas for a node which are spanned by another node's contents. In the mark_reserved_regions_for_nid() code, we attempt to reserve the area for a node before we have allocated the NODE_DATA() for that nid. We do this since I reordered that loop. I suck. This is causing crashes at bootup on some systems, as reported by Jon Tollefson. This may only present on some systems that have 16GB pages reserved. But, it can probably happen on any system that is trying to reserve large swaths of memory that happen to span other nodes' contents. This commit ensures that we do not touch bootmem for any node which has not been initialized, and also removes a compile warning about an unused variable. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Check for valid hugepage size in hugetlb_get_unmapped_areaBrian King
It looks like most of the hugetlb code is doing the correct thing if hugepages are not supported, but the mmap code is not. If we get into the mmap code when hugepages are not supported, such as in an LPAR which is running Active Memory Sharing, we can oops the kernel. This fixes the oops being seen in this path. oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs(N) lockd(N) nfs_acl(N) sunrpc(N) ipv6(N) fuse(N) loop(N) dm_mod(N) sg(N) ibmveth(N) sd_mod(N) crc_t10dif(N) ibmvscsic(N) scsi_transport_srp(N) scsi_tgt(N) scsi_mod(N) Supported: No NIP: c000000000038d60 LR: c00000000003945c CTR: c0000000000393f0 REGS: c000000077e7b830 TRAP: 0300 Tainted: G (2.6.27.5-bz50170-2-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 44000448 XER: 20000001 DAR: c000002000af90a8, DSISR: 0000000040000000 TASK = c00000007c1b8600[4019] 'hugemmap01' THREAD: c000000077e78000 CPU: 6 GPR00: 0000001fffffffe0 c000000077e7bab0 c0000000009a4e78 0000000000000000 GPR04: 0000000000010000 0000000000000001 00000000ffffffff 0000000000000001 GPR08: 0000000000000000 c000000000af90c8 0000000000000001 0000000000000000 GPR12: 000000000000003f c000000000a73880 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000010000 GPR20: 0000000000000000 0000000000000003 0000000000010000 0000000000000001 GPR24: 0000000000000003 0000000000000000 0000000000000001 ffffffffffffffb5 GPR28: c000000077ca2e80 0000000000000000 c00000000092af78 0000000000010000 NIP [c000000000038d60] .slice_get_unmapped_area+0x6c/0x4e0 LR [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 Call Trace: [c000000077e7bbc0] [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 [c000000077e7bc30] [c000000000107e30] .get_unmapped_area+0x64/0xd8 [c000000077e7bcb0] [c00000000010b140] .do_mmap_pgoff+0x140/0x420 [c000000077e7bd80] [c00000000000bf5c] .sys_mmap+0xc4/0x140 [c000000077e7be30] [c0000000000086b4] syscall_exit+0x0/0x40 Instruction dump: fac1ffb0 fae1ffb8 fb01ffc0 fb21ffc8 fb41ffd0 fb61ffd8 fb81ffe0 fbc1fff0 fbe1fff8 f821fef1 f8c10158 f8e10160 <7d49002e> f9010168 e92d01b0 eb4902b0 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-15powerpc/85xx: Fix compile issues with mpc8572ds.dtsKumar Gala
Fix the localbus reg & range properties to respect that the top level #address-cells and #size-cells = 2. The original commit (c64ef80b517680f1e228b2ee55e3ce7cd94c7fe0) did not do that. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15powerpc: Fix bogus cache flushing on all 40x and BookE processors v2Benjamin Herrenschmidt
We were missing the CPU_FTR_NOEXECUTE bit in our cputable for all these processors. The result is that update_mmu_cache() would flush the cache for all pages mapped to userspace which is totally unnecessary on those processors since we already handle flushing on execute in the page fault path. This should provide a nice speed up ;-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
2008-12-14x86 Fix VMI crash on boot in 2.6.28-rc8Zachary Amsden
VMI initialiation can relocate the fixmap, causing early_ioremap to malfunction if it is initialized before the relocation. To fix this, VMI activation is split into two phases; the detection, which must happen before setting up ioremap, and the activation, which must happen after parsing early boot parameters. This fixes a crash on boot when VMI is enabled under VMware. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-13powerpc/fsl-booke: Fix problem with _tlbil_va being interruptedKumar Gala
An example calling sequence which we did see: copy_user_highpage -> kmap_atomic -> flush_tlb_page -> _tlbil_va We got interrupted after setting up the MAS registers before the tlbwe and the interrupt handler that caused the interrupt also did a kmap_atomic (ide code) and thus on returning from the interrupt the MAS registers no longer contained the proper values. Since we dont save/restore MAS registers for normal interrupts we need to disable interrupts in _tlbil_va to ensure atomicity. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx: powerpc/40x: Add proper BOOTCFLAGS for cuboot-acadia
2008-12-12MIPS: IP32: Update defconfigDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12MIPS: Add missing calls to plat_unmap_dma_mem.David Daney
dma_free_noncoherent() and dma_free_coherent() are missing calls to plat_unmap_dma_mem(). This patch adds them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12MIPS: Kconfig: Fix the arch-specific header pathDmitri Vorobiev
The header path in the help text for the RUNTIME_DEBUG config option is obsolete and needs to be updated to match the new location of architecture-specific header files. While at it, fix the spelling mistake. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12MIPS: Use EI/DI for MIPS R2.David Daney
For MIPS R2, use the EI and DI instructions to enable and disable interrupts. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-11powerpc/40x: Add proper BOOTCFLAGS for cuboot-acadiaJosh Boyer
The cuboot-acadia.c wrapper can cause assembler errors on some toolchains due to the lack of the proper BOOTCFLAGS. This adds the proper flags for the file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-10MN10300: Give correct size when reserving interrupt vector tableAkira Takeuchi
Give the correct size when reserving the interrupt vector table. It should be a page not a single byte. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Fix the preemption resume_kernel() routineAkira Takeuchi
Fix the preemption resume_kernel() routine by inverting the test to see whether interrupts are off (IM7 is all enabled, not all disabled). Furthermore, interrupts should be disabled on entry to resume_kernel() so that they're correctly set for jumping to restore_all() and doing the need reschedule test. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: Discard low-priority Tx interrupts when closing an on-chip serial portAkira Takeuchi
Discard low-prioriy Tx interrupts when closing an MN10300 on-chip serial port. The MN10300 on-chip serial port uses three interrupts to manage its serial ports: (1) A very high priority interrupt that drives virtual DMA for Rx. (2) A very high priority interrupt that drives virtual DMA for Tx. (3) A normal priority virtual interrupt that does the normal UART interrupt stuff and is shared between Rx and Tx. mn10300_serial_stop_tx() only disables the high priority Tx interrupt. It doesn't also disable the normal priority one because it is shared with Rx. However, the high priority interrupt may interrupt local_irq_disabled() sections, and so may have queued up a low priority virtual interrupt whilst the UART driver is asking for the Tx interrupt to be disabled. The result of this can be an oops when we try to process the interrupt in mn10300_serial_transmit_interrupt() as port->uart.info and port->uart.info->tty may have gone away. To deal with this, if either of those pointers is NULL, we make sure the high-priority Tx interrupt is disabled and discard the interrupt. The low priority interrupt is disabled by the mn10300_serial_pic irq_chip table. Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10MN10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macrosCyrill Gorcunov
Include the linux/page.h header into the MN10300 kernel linker script thus allowing us to use PAGE_SIZE macro instead of a numeric constant. Also use the PERCPU macro instead of an explicit section definition. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN: prevent IRQ retargetting in request_irq() [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule [IA64] Clear up section mismatch for ioc4_ide_attach_one. [IA64] Clear up section mismatch with arch_unregister_cpu() [IA64] Clear up section mismatch for sn_check_wars. [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE [IA64] eliminate NULL test and memset after alloc_bootmem [IA64] remove BUILD_BUG_ON from paravirt_getreg()
2008-12-10Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Better than nothing implementation of PCI mmap to fix X.
2008-12-10uml: boot broken due to buffer overrunBalbir Singh
mconsole_init() passed 256 bytes as length in os_create_unix_socket, while the sizeof UNIX_PATH_MAX is 108. This patch fixes that problem and avoids a big overrun bug reported on UML bootup. sockaddr_un.sun_path is UNIX_PATH_MAX long which causes the problem. Reported-by: Vikas K Managutte <vikki.km@gmail.com> Reported-by: Sarvesh Kumar Lal Das <skldas@gmail.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Reviewed-by: WANG Cong <wangcong@zeuux.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> [please check with Jeff] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-09MIPS: Better than nothing implementation of PCI mmap to fix X.Ralf Baechle
Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-09[IA64] SN: prevent IRQ retargetting in request_irq()John Keller
With the introduction of the generic affinity autoselector, irq_select_affinity(), IRQs are now being retargetted, using a default mask, via the request_irq() path. This results in all IRQs targetted at CPU 0. SN Altix assigns affinity in the SN PROM, and does not expect that to be changed as part of request_irq(). Set the IRQ_AFFINITY_SET flag to prevent request_irq() from resetting affinity. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09[IA64] Clear up section mismatch with arch_unregister_cpu()Robin Holt
The generic_defconfig has three section mismatches. This clears arch_unregister_cpu() Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09[IA64] Clear up section mismatch for sn_check_wars.Robin Holt
The generic_defconfig has three section mismatches. This clears up sn_check_wars(). Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09[IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel.Robin Holt
The AUTOFS=y and AUTOFS4=y causes problems with some distros versions of automount. I turned both of those to =m and then followed the default prompts for everything else. I did notice that CONFIG_PNP_DEBUG got changed to CONFIG_PNP_DEBUG_MESSAGES and the default was a =y so I turned that back to a =n. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09[IA64] eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09[IA64] remove BUILD_BUG_ON from paravirt_getreg()Alexey Dobriyan
CC arch/ia64/kernel/asm-offsets.s In file included from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/ia64/kernel/asm-offsets.c:9: arch/ia64/include/asm/bitops.h: In function 'set_bit': arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON' Obvious inclusion of kernel.h doesn't fix it, because of circular dependencies involving fls.h and log2(). Fixing the latter requires some serious header surgery, it seems, so just remove BUILD_BUG_ON for now. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix alignment fault handling for ARMv6 and later CPUs [ARM] 5340/1: fix stack placement after noexecstack changes [ARM] 5339/1: fix __fls() on ARM [ARM] Orion: fix bug in pcie configuration cycle function field mask [ARM] omap: fix a pile of issues
2008-12-09Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/virtex5: Fix Virtex5 machine check handling
2008-12-09Merge branch 'merge' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2008-12-08x86: fix default_spin_lock_flags() prototypeIngo Molnar
these warnings: arch/x86/kernel/paravirt-spinlocks.c: In function ‘default_spin_lock_flags’: arch/x86/kernel/paravirt-spinlocks.c:12: warning: passing argument 1 of ‘__raw_spin_lock’ from incompatible pointer type arch/x86/kernel/paravirt-spinlocks.c: At top level: arch/x86/kernel/paravirt-spinlocks.c:11: warning: ‘default_spin_lock_flags’ defined but not used showed that the prototype of default_spin_lock_flags() was confused about what type spinlocks have. the proper type on UP is raw_spinlock_t. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08AMD IOMMU: __unmap_single: check for bad_dma_address instead of 0Joerg Roedel
Impact: minor fix Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 00:29:03 +0000