aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-03-05[PATCH] vmi: paravirt drop udelay opZachary Amsden
Not respecting udelay causes problems with any virtual hardware that is passed through to real hardware. This can be noticed by any device that interacts with the real world in real time - like AP startup, which takes real time. Or keyboard LEDs, which should blink in real-time. Or floppy drives, but only when passed through to a real floppy controller on OSes which can't sufficiently buffer the floppy commands to emulate a zero latency floppy. Or IDE drives, when connecting to a physical CDROM. This was mostly a hack to get the kernel to boot faster, but it introduced a number of misvirtualization bugs, and Alan and Pavel argued pretty strongly against it. We were the only client, and now want to clean up this cruft. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] vmi: fix highpteZachary Amsden
Provide a PT map hook for HIGHPTE kernels to designate where they are mapping page tables. This information is required so the physical address of PTE updates can be determined; otherwise, the mm layer would have to carry the physical address all the way to each PTE modification callsite, which is even more hideous that the macros required to provide the proper hooks. So lets not mess up arch neutral code to achieve this, but keep the horror in an #ifdef HIGHPTE in include/asm-i386/pgtable.h. I had to use macros here because some types are not yet defined in all the include paths for this header. This patch is absolutely required for HIGHPTE kernels to operate properly with VMI. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] vmi: cpu cycles fixZachary Amsden
In order to share the common code in tsc.c which does CPU Khz calibration, we need to make an accurate value of CPU speed available to the tsc.c code. This value loses a lot of precision in a VM because of the timing differences with real hardware, but we need it to be as precise as possible so the guest can make accurate time calculations with the cycle counters. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] vmi: sched clock paravirt op fixZachary Amsden
The custom_sched_clock hook is broken. The result from sched_clock needs to be in nanoseconds, not in CPU cycles. The TSC is insufficient for this purpose, because TSC is poorly defined in a virtual environment, and mostly represents real world time instead of scheduled process time (which can be interrupted without notice when a virtual machine is descheduled). To make the scheduler consistent, we must expose a different nature of time, that is scheduled time. So deprecate this custom_sched_clock hack and turn it into a paravirt-op, as it should have been all along. This allows the tsc.c code which converts cycles to nanoseconds to be shared by all paravirt-ops backends. It is unfortunate to add a new paravirt-op, but this is a very distinct abstraction which is clearly different for all virtual machine implementations, and it gets rid of an ugly indirect function which I ashamedly admit I hacked in to try to get this to work earlier, and then even got in the wrong units. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] vmi: timer fixes round twoZachary Amsden
Critical bugfixes for the VMI-Timer code. 1) Do not setup a one shot alarm if we are keeping the periodic alarm armed. Additionally, since the periodic alarm can be run at a lower rate than HZ, let's fixup the guard to the no-idle-hz mode appropriately. This fixes the bug where the no-idle-hz mode might have a higher interrupt rate than the non-idle case. 2) The interrupt handler can no longer adjust xtime due to nested lock acquisition. Drop this. We don't need to check for wallclock time at every tick, it can be done in userspace instead. 3) Add a bypass to disable noidle operation. This is useful as a last minute workaround, or testing measure. 4) The code to skip the IO_APIC timer testing (no_timer_check) should be conditional on IO_APIC, not SMP, since UP kernels can have this configured in as well. Signed-off-by: Dan Hecht <dhecht@vmware.com> Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] add CONFIG_GENERIC_GPIODavid Brownell
Most drivers using GPIOs already know they are running on a system that supports the generic GPIO calls, because of other platform dependencies. But the generic GPIO-based LED and input button drivers can't know that. So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms where <asm/gpio.h> will do the right thing. Currently that's a bunch of ARMs, and AVR32; more are on the way. It also fixes a dependency bug for the gpio button input driver; it was wrong to start with, now it covers all platforms with GENERIC_GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: <raph@8d.com> Cc: <msvoboda@ra.rockwell.com> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] msi: sanely support hardware level msi disablingEric W. Biederman
In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] Acorn: move the i2c bus driver into drivers/i2c [ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries [ARM] ARM FAS216: don't modify scsi_cmnd request_bufflen [ARM] rtc-pcf8583: Final fixes for this RTC on RiscPC [ARM] rtc-pcf8583: correct month and year offsets [ARM] rtc-pcf8583: don't use BCD_TO_BIN/BIN_TO_BCD [ARM] EBSA110: Work around build errors [ARM] 4241/1: Define mb() as compiler barrier on a uniprocessor system [ARM] 4239/1: S3C24XX: Update kconfig entries for PM [ARM] 4238/1: S3C24XX: docs: update suspend and resume [ARM] 4237/2: oprofile: Always allow backtraces on ARM [ARM] Yet more asm/apm-emulation.h stuff ARM: OMAP: Add missing get_irqnr_preamble and arch_ret_to_user for omap2 ARM: OMAP: Use linux/delay.h not asm/delay.h ARM: OMAP: Remove obsolete alsa typedefs ARM: OMAP: omap1510->15xx conversions needed for sx1 ARM: OMAP: Add missing includes to board-nokia770 ARM: OMAP: Workqueue changes for board-h4.c ARM: OMAP: dmtimer.c omap1 register fix ARM: OMAP: board-nokia770: correct lcd name ...
2007-03-04[MIPS] MTX1: clear PCI errorsFlorian Fainelli
This patch clears PCI errors after showing more debug informations. Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] MTX1: add idsel cardbus ressourcesFlorian Fainelli
Adds cardbus ressources for MTX1 boards which have a PCMCIA controller. Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] MTX1: remove unneeded settingsFlorian Fainelli
This patch removes unnecessary settings at setup time. Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] dma_sync_sg_for_cpu is a no-op except for non-coherent R10000s.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Cobalt: update reserved resourcesYoichi Yuasa
This patch has removed unused timer resource. Moreover, the name of reserved resources ware changed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] SN: PCI fixup needs to include <irq.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Fix and cleanup the mess that a dozen prom_printf variants are.Ralf Baechle
early_printk is a so much saner thing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] DEC: Remove redeclarations of mips_machgroup and mips_machtype.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] No need to write c0_compare in plat_timer_setupAtsushi Nemoto
If R4k counter was used for hpt_timer and interrupt source, c0_hpt_timer_init() initializes the c0_compare register. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Convert to RTC-class ds1742 driverAtsushi Nemoto
The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927 (with __swizzle_addr trick). This patch also removes MIPS local DS1742 stuff. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Oprofile: Add missing break statements.Ralf Baechle
This was causing oprofile to fail on R10000, R12000, R14000. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] jmr3927: build fixAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Replace sys32_timer_create with the generic compat_sys_timer_create.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Replace sys32_socketcall with the generic compat_sys_socketcall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] N32 waitid is the same as o32.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-03[ARM] EBSA110: Work around build errorsRussell King
Work around EBSA110 build errors by selecting NO_IOPORT. EBSA110 can't support an IO port to MMIO mapping mechanism because the MMIO and IO port spaces have quite different and complex addressing requirements. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02mv643xx_eth: move mac_addr inside mv643xx_eth_platform_dataDale Farnsworth
The information contained within platform_data should be self-contained. Replace the pointer to a MAC address with the actual MAC address in struct mv643xx_eth_platform_data. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02jmr3927: do not call tc35815_killall().Ralf Baechle
No need to stop tc35815 before resetting the board. This fixes the build of tc35815 as a module. This also means there is no caller of tc35815_killall left, so remove that function also. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02[SPARC]: Provide pci_device_to_OF_node() just like powerpc.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02[SPARC]: Handle unresolvable resources better in of_device.cDavid S. Miller
Just leave them as zero if we couldn't calculate it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02[SPARC]: Fix bus handling in build_device_resources().David S. Miller
We mistakedly modify 'bus' in the innermost loop. What should happen is that at each register index iteration, we start with the same 'bus'. So preserve it's value at the top level, and use a loop local variable 'dbus' for iteration. This bug causes registers other than the first to be decoded improperly. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2007-03-02[ARM] 4239/1: S3C24XX: Update kconfig entries for PMBen Dooks
Update help text with location of documentation and duplicate the note on the speed of CRC Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] 4237/2: oprofile: Always allow backtraces on ARMRichard Purdie
Always allow backtrace when using oprofile on ARM, even if a PMU isn't present. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] Yet more asm/apm-emulation.h stuffRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02ARM: OMAP: Use linux/delay.h not asm/delay.hTony Lindgren
Use linux/delay.h not asm/delay.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap1510->15xx conversions needed for sx1Vladimir Ananiev
Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Add missing includes to board-nokia770Dirk Behme
Add missing includes to board-nokia770 to make it compile again. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Workqueue changes for board-h4.cDirk Behme
Workqueue changes for board-h4.c Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: dmtimer.c omap1 register fixMatthew Percival
When I went to use dmtimer7 it did not seem to work. I noticed that the base addresses for dmtimers 7 and 8 were set wrong. A simple patch to correct a small error. Confirmed to fix the problem on an OSK. Signed-off-by: Matthew Percival <matthew@capgo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: board-nokia770: correct lcd nameArnaud Patard
Some time ago, the 'lcd_lph8923' device was renamed to 'lcd_mipid' but the board-nokia770.c file was not updated accordingly, leading to not working lcd. This one-liner fixe the trouble. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap GP timer: HZ != 100David Brownell
Teach OMAP2 gp timer that HZ isn't always 100. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in mach-omap1Dirk Behme
Fix warning arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:765: warning: ignoring return value of 'subsys_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix CONFIG_DEBUG_LLDirk Behme
Fix broken CONFIG_DEBUG_LL. In case of low level debugging reconfigure some clocks early. See http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093 too. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in mach-omap2Dirk Behme
Fix warning arch/arm/mach-omap2/timer-gp.c: In function 'omap2_gp_timer_init': arch/arm/mach-omap2/timer-gp.c:70: warning: implicit declaration of function 'setup_irq' Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warnings in plat-omapDirk Behme
Fix warnings arch/arm/plat-omap/dmtimer.c: In function 'omap_dm_timer_modify_idlect_mask': arch/arm/plat-omap/dmtimer.c:317: warning: no return statement in function returning non-void arch/arm/plat-omap/mailbox.c: In function 'omap_mbox_init': arch/arm/plat-omap/mailbox.c:231: warning: ignoring return value of 'class_device_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO)Dirk Behme
No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO) Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: OMAP310 SerialMarek Vašut
This makes serial usable also on omap310, not only 1510. (changing 1510->15xx) Signed-off-by: Marek Vašut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Proper handling of DMA4_IRQSTATUS_L0Timo Teras
The register bits are reset by writing one. Remove the unneeded reads and fix writes to not clear too many bits. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Fix warning in clock.cDirk Behme
Fix warning: arch/arm/mach-omap1/clock.c: In function 'omap1_clk_enable_generic': arch/arm/mach-omap1/clock.c:499: warning: 'return' with no value, in function returning non-void Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: correct misc 15xx and non-15xx platform codeAndrzej Zaborowski
Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG registers for 15xx processors that don't have these registers. Enable level 2 interrupt handler for processors that identify as OMAP 15xx (e.g 310) and not 1510 specifically. Also fix the following compiler warning (only visible with CONFIG_OMAP_RESET_CLOCKS): arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused': arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in function returning void Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-01Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix parport_pc build. [SPARC64]: Update defconfig.