aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template crypto: aes-ni - Do not sleep when using the FPU crypto: aes-ni - Fix cbc mode IV saving crypto: padlock-aes - work around Nano CPU errata in CBC mode crypto: padlock-aes - work around Nano CPU errata in ECB mode
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20x86, 64-bit: Clean up user address maskingLinus Torvalds
The discussion about using "access_ok()" in get_user_pages_fast() (see commit 7f8189068726492950bf1a2dcfd9b51314560abf: "x86: don't use 'access_ok()' as a range check in get_user_pages_fast()" for details and end result), made us notice that x86-64 was really being very sloppy about virtual address checking. So be way more careful and straightforward about masking x86-64 virtual addresses: - All the VIRTUAL_MASK* variants now cover half of the address space, it's not like we can use the full mask on a signed integer, and the larger mask just invites mistakes when applying it to either half of the 48-bit address space. - /proc/kcore's kc_offset_to_vaddr() becomes a lot more obvious when it transforms a file offset into a (kernel-half) virtual address. - Unify/simplify the 32-bit and 64-bit USER_DS definition to be based on TASK_SIZE_MAX. This cleanup and more careful/obvious user virtual address checking also uncovered a buglet in the x86-64 implementation of strnlen_user(): it would do an "access_ok()" check on the whole potential area, even if the string itself was much shorter, and thus return an error even for valid strings. Our sloppy checking had hidden this. So this fixes 'strnlen_user()' to do this properly, the same way we already handled user strings in 'strncpy_from_user()'. Namely by just checking the first byte, and then relying on fault handling for the rest. That always works, since we impose a guard page that cannot be mapped at the end of the user space address space (and even if we didn't, we'd have the address space hole). Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits) perfcounter: Handle some IO return values perf_counter: Push perf_sample_data through the swcounter code perf_counter tools: Define and use our own u64, s64 etc. definitions perf_counter: Close race in perf_lock_task_context() perf_counter, x86: Improve interactions with fast-gup perf_counter: Simplify and fix task migration counting perf_counter tools: Add a data file header perf_counter: Update userspace callchain sampling uses perf_counter: Make callchain samples extensible perf report: Filter to parent set by default perf_counter tools: Handle lost events perf_counter: Add event overlow handling fs: Provide empty .set_page_dirty() aop for anon inodes perf_counter: tools: Makefile tweaks for 64-bit powerpc perf_counter: powerpc: Add processor back-end for MPC7450 family perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels perf_counter: powerpc: Change how processor-specific back-ends get selected perf_counter: powerpc: Use unsigned long for register and constraint values perf_counter: powerpc: Enable use of software counters on 32-bit powerpc perf_counter tools: Add and use isprint() ...
2009-06-20Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix out of scope variable access in sched_slice() sched: Hide runqueues from direct refer at source code level sched: Remove unneeded __ref tag sched, x86: Fix cpufreq + sched_clock() TSC scaling
2009-06-20Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits) tracing/urgent: warn in case of ftrace_start_up inbalance tracing/urgent: fix unbalanced ftrace_start_up function-graph: add stack frame test function-graph: disable when both x86_32 and optimize for size are configured ring-buffer: have benchmark test print to trace buffer ring-buffer: do not grab locks in nmi ring-buffer: add locks around rb_per_cpu_empty ring-buffer: check for less than two in size allocation ring-buffer: remove useless compile check for buffer_page size ring-buffer: remove useless warn on check ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index tracing: update sample event documentation tracing/filters: fix race between filter setting and module unload tracing/filters: free filter_string in destroy_preds() ring-buffer: use commit counters for commit pointer accounting ring-buffer: remove unused variable ring-buffer: have benchmark test handle discarded events ring-buffer: prevent adding write in discarded area tracing/filters: strloc should be unsigned short tracing/filters: operand can be negative ... Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
2009-06-20Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits) x86, mce: fix error path in mce_create_device() x86: use zalloc_cpumask_var for mce_dev_initialized x86: fix duplicated sysfs attribute x86: de-assembler-ize asm/desc.h i386: fix/simplify espfix stack switching, move it into assembly i386: fix return to 16-bit stack from NMI handler x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present x86: Remove duplicated #include's x86: msr.h linux/types.h is only required for __KERNEL__ x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround x86, mce: mce_intel.c needs <asm/apic.h> x86: apic/io_apic.c: dmar_msi_type should be static x86, io_apic.c: Work around compiler warning x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present x86: mce: Handle banks == 0 case in K7 quirk x86, boot: use .code16gcc instead of .code16 x86: correct the conversion of EFI memory types x86: cap iomem_resource to addressable physical memory x86, mce: rename _64.c files which are no longer 64-bit-specific x86, mce: mce.h cleanup ... Manually fix up trivial conflict in arch/x86/mm/fault.c
2009-06-20Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add missing symbols for CONSTRUCTORS support microblaze: remove init_mm
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-20x86: don't use 'access_ok()' as a range check in get_user_pages_fast()Linus Torvalds
It's really not right to use 'access_ok()', since that is meant for the normal "get_user()" and "copy_from/to_user()" accesses, which are done through the TLB, rather than through the page tables. Why? access_ok() does both too few, and too many checks. Too many, because it is meant for regular kernel accesses that will not honor the 'user' bit in the page tables, and because it honors the USER_DS vs KERNEL_DS distinction that we shouldn't care about in GUP. And too few, because it doesn't do the 'canonical' check on the address on x86-64, since the TLB will do that for us. So instead of using a function that isn't meant for this, and does something else and much more complicated, just do the real rules: we don't want the range to overflow, and on x86-64, we want it to be a canonical low address (on 32-bit, all addresses are canonical). Acked-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20microblaze: Add missing symbols for CONSTRUCTORS supportMichal Simek
Commit b99b87f70c7785ab1e253c6220f4b0b57ce3a7f7 add CONSTRUCTOR support to Linux but Microblaze not defined KERNEL_CTORS symbols which are used with that patch. This patch fixed it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-06-20microblaze: remove init_mmArnd Bergmann
Alexey removed the definition for init_mm from all architectures but forgot microblaze, which was only recently added. This fixes the microblaze build by dropping it there as well. Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-06-20Merge branch 'x86/mce3' into x86/urgentIngo Molnar
2009-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: sparc64: Fix UP bootup regression.
2009-06-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits) powerpc/5121: make clock debug output more readable powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback fbdev/xilinxfb: Fix improper casting and tighen up probe path usb/ps3: Add missing annotations powerpc: Add memory clobber to mtspr() powerpc: Fix invalid construct in our CPU selection Kconfig ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access powerpc: Add configurable -Werror for arch/powerpc of_serial: Add UPF_FIXED_TYPE flag drivers/hvc: Add missing __devexit_p() net/ps3: gelic - Add missing annotations powerpc: Introduce macro spin_event_timeout() powerpc/warp: Fix ISA_DMA_THRESHOLD default powerpc/bootwrapper: Custom build options for XPedite52xx targets powerpc/85xx: Add defconfig for X-ES MPC85xx boards powerpc/85xx: Add dts files for X-ES MPC85xx boards powerpc/85xx: Add platform support for X-ES MPC85xx boards 83xx: add support for the kmeter1 board. ...
2009-06-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: convert page/tlb to asm-generic Blackfin: convert types to asm-generic Blackfin: convert irq/process to asm-generic Blackfin: convert signal/mmap to asm-generic Blackfin: convert locking primitives to asm-generic Blackfin: convert termios to asm-generic Blackfin: convert simple headers to asm-generic Blackfin: convert socket/poll to asm-generic Blackfin: convert user/elf to asm-generic Blackfin: convert shm/sysv/ipc to asm-generic Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h Blackfin: only build irqpanic.c when needed Blackfin: pull in asm/io.h in ksyms for prototypes Blackfin: use common test_bit() rather than __test_bit()
2009-06-19powerpc/86xx: add MMC SPI support for MPC8610HPCD boardsAnton Vorontsov
This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for PIXIS' sdcsr bank that is used for managing SPI chip-select and for reading card's states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19perf_counter, x86: Improve interactions with fast-gupIngo Molnar
Improve a few details in perfcounter call-chain recording that makes use of fast-GUP: - Use ACCESS_ONCE() to observe the pte value. ptes are fundamentally racy and can be changed on another CPU, so we have to be careful about how we access them. The PAE branch is already careful with read-barriers - but the non-PAE and 64-bit side needs an ACCESS_ONCE() to make sure the pte value is observed only once. - make the checks a bit stricter so that we can feed it any kind of cra^H^H^H user-space input ;-) Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19perf_counter: Make callchain samples extensiblePeter Zijlstra
Before exposing upstream tools to a callchain-samples ABI, tidy it up to make it more extensible in the future: Use markers in the IP chain to denote context, use (u64)-1..-4095 range for these context markers because we use them for ERR_PTR(), so these addresses are unlikely to be mapped. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18sparc64: Fix UP bootup regression.David S. Miller
Commit b696fdc259f0d94348a9327bed352fac44d4883d ("sparc64: Defer cpu_data() setup until end of per-cpu data initialization.") broke bootup for UP builds because the cpu_data() initialization only occurs in setup_per_cpu_areas() which is never compiled in nor called in UP builds. Fix this up by calling the setups directly from init_64.c when non-SMP. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18Blackfin: convert page/tlb to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert types to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert irq/process to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert signal/mmap to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert locking primitives to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert termios to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert simple headers to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert socket/poll to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert user/elf to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert shm/sysv/ipc to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert asm/ioctls.h to asm-generic/ioctls.hMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: only build irqpanic.c when neededMike Frysinger
The irq_panic function is only used when CONFIG_DEBUG_ICACHE_CHECK is enabled, so move the conditional build to the Makefile rather than wrapping all of the contents of the file. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: pull in asm/io.h in ksyms for prototypesMike Frysinger
Make sure we pull in asm/io.h when exporting symbols for the I/O functions so we don't end up with a build failure due to missing prototypes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: use common test_bit() rather than __test_bit()Mike Frysinger
Convert to test_bit() as that is what pretty much everyone uses and allows us to migrate asm/bitops.h to the asm-generic version. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18function-graph: add stack frame testSteven Rostedt
In case gcc does something funny with the stack frames, or the return from function code, we would like to detect that. An arch may implement passing of a variable that is unique to the function and can be saved on entering a function and can be tested when exiting the function. Usually the frame pointer can be used for this purpose. This patch also implements this for x86. Where it passes in the stack frame of the parent function, and will test that frame on exit. There was a case in x86_32 with optimize for size (-Os) where, for a few functions, gcc would align the stack frame and place a copy of the return address into it. The function graph tracer modified the copy and not the actual return address. On return from the funtion, it did not go to the tracer hook, but returned to the parent. This broke the function graph tracer, because the return of the parent (where gcc did not do this funky manipulation) returned to the location that the child function was suppose to. This caused strange kernel crashes. This test detected the problem and pointed out where the issue was. This modifies the parameters of one of the functions that the arch specific code calls, so it includes changes to arch code to accommodate the new prototype. Note, I notice that the parsic arch implements its own push_return_trace. This is now a generic function and the ftrace_push_return_trace should be used instead. This patch does not touch that code. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (56 commits) sh: Fix declaration of __kernel_sigreturn and __kernel_rt_sigreturn sh: Enable soc-camera in ap325rxa/migor/se7724 defconfigs. sh: remove stray markers. sh: defconfig updates. sh: pci: Initial PCI-Express support for SH7786 Urquell board. sh: Generic HAVE_PERF_COUNTER support. SH: convert migor to soc-camera as platform-device SH: convert ap325rxa to soc-camera as platform-device soc-camera: unify i2c camera device platform data sh: add platform data for r8a66597-hcd in setup-sh7723 sh: add platform data for r8a66597-hcd in setup-sh7366 sh: x3proto: add platform data for r8a66597-hcd sh: highlander: add platform data for r8a66597-hcd sh: sh7785lcr: add platform data for r8a66597-hcd sh: turn off irqs when disabling CMT/TMU timers sh: use kzalloc() for cpg clocks sh: unbreak WARN_ON() sh: Use generic atomic64_t implementation. sh: Revised clock function in highlander sh: Update r7780mp defconfig ...
2009-06-18MN10300: Add support for new ELF relocs in kernel modulesMark Salter
Add support for new relocs which may show up in MN10300 kernel modules due to linker relaxation. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: ia64: add CONFIG_DMA_API_DEBUG supportFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: ia64: use asm-generic/dma-mapping-common.hFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18dma-mapping: x86: use asm-generic/dma-mapping-common.hFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gcov: enable GCOV_PROFILE_ALL for x86_64Peter Oberparleiter
Enable gcov profiling of the entire kernel on x86_64. Required changes include disabling profiling for: * arch/kernel/acpi/realmode and arch/kernel/boot/compressed: not linked to main kernel * arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet: profiling causes segfaults during boot (incompatible context) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gcov: add gcov profiling infrastructurePeter Oberparleiter
Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: cpc925 MC platform device setupHarry Ciao
Fix up the number of cells for the values of CPC925 Memory Controller, and setup related platform device during system booting up, against which CPC925 Memory Controller EDAC driver would be matched. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: remove PT_DTRACE from arch/m32rOleg Nesterov
m32r: PTRACE_SINGLESTEP sets PT_DTRACE, it is never used except cleared after do_execve(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: remove PT_DTRACE from m68k, m68knommuOleg Nesterov
m68k sets PT_DTRACE in trap_c() but never uses it. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: remove PT_DTRACE from avr32, mn10300, parisc, s390, sh, xtensaOleg Nesterov
avr32, mn10300, parisc, s390, sh, xtensa: They never set PT_DTRACE, but clear it after do_execve(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Chris Zankel <chris@zankel.net> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: remove PT_DTRACE from arch/h8300Oleg Nesterov
h8300 defines PT_DTRACE for asm but never uses it. DEFINE(PT_PTRACED, PT_PTRACED) seems to be unused too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18x86, mce: fix error path in mce_create_device()Hidetoshi Seto
Don't skip removing mce_attrs in route from error2. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-18crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu templateHuang Ying
kernel_fpu_begin/end used preempt_disable/enable, so sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-18crypto: aes-ni - Do not sleep when using the FPUHuang Ying
Because AES-NI instructions will touch XMM state, corresponding code must be enclosed within kernel_fpu_begin/end, which used preempt_disable/enable. So sleep should be prevented between kernel_fpu_begin/end. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>