aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-11-22omap1: mmc: Add platform init for omap7xxCory Maccarrone
The MMC mux pins normally used by omap chips in devices.c are different from what is needed by omap7xx chips. This change adds a conditional around the mux setup code to enable the correct mux pins. The omap730 and omap850 both use a different clock for the "fck" clock of the MMC interface than other omap processors based on the SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used by other omap processors. * Added the missing clock definition as mmc3_ck to clock.h * Added the clock definition to omap_clks in clock.c * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c With these changes, it is now possible to initialize and use MMC cards with omap730 and omap850 devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL configvikram pandita
Zoom2/Zoom3 kind of boards do not use omap uarts for console. These use external debug board for console. So these boards should not have "Uncompressing Kernel...." log put on omap uarts. By interoducing OMAP_LL_DEBUG_NONE option, unnecessary writes to omap uarts is avoided. In future, the DEBUG_LL interface will be enhanced to use external debug board. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap: Eliminate OMAP_MAX_NR_PORTSAlexander Shishkin
Eliminate OMAP_MAX_NR_PORTS Note that also the null terminator entry for omap1 serial_platform_data needs to be now removed to avoid oopsing. Note that mach-omap1 uses struct plat_serial8250_port array, which requires a null terminator at the end, and that's why we need to use ARRAY_SIZE - 1. This is not needed on mach-omap2 as the array used is struct omap_uart_state, and does not use a null terminator. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22ARM OMAP3: RX-51 board - add initialization of gpio keysJani Nikula
Initialize some of the RX-51 input GPIO lines as gpio keys. Enable gpio keys as a module in rx51_defconfig. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-22OMAP: Configure audio_mclk for twl4030-codec MFDPeter Ujfalusi
audio_mclk value is going to be handled by the twl4030-codec MFD driver, configure the correct value for boards, which is using the twl4030 audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22OMAP: Platform support for twl4030_codec MFDPeter Ujfalusi
Add needed platform data for the twl4030_codec MFD on boards, where the audio part of the twl4030 codec is used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22Merge 7xx-iosplit-plat-merge with omap-fixesTony Lindgren
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
2009-11-18Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix stale cpufreq_cpu_governor pointer [CPUFREQ] Resolve time unit thinko in ondemand/conservative govs [CPUFREQ] speedstep-ich: fix error caused by 394122ab144dae4b276d74644a2f11c44a60ac5c [CPUFREQ] Fix use after free on governor restore [CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in notification message [CPUFREQ] powernow-k8: Fix test in get_transition_latency() [CPUFREQ] longhaul: select Longhaul version 2 for capable CPUs
2009-11-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: cs should be positive in gpmc_cs_free() omap: fix unlikely(x) < y omap3: clock: Fixed dpll3_m2x2 rate calculation omap3: clock: Fix the DPLL freqsel computations omap: Fix keymap for zoom2 according to matrix keypad framwork
2009-11-18OMAP: cs should be positive in gpmc_cs_free()Roel Kluin
The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18omap: fix unlikely(x) < yRoel Kluin
The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup last users of irq_chip->typename uio: pm_runtime_disable is needed if failed
2009-11-17[CPUFREQ] speedstep-ich: fix error caused by ↵Rusty Russell
394122ab144dae4b276d74644a2f11c44a60ac5c "[CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c" changed the code to mistakenly pass the current cpu as the "processor" argument of speedstep_get_frequency(), whereas it should be the type of the processor. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14340 Based on a patch by Dave Mueller. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Dominik Brodowski <linux@brodo.de> Reported-by: Dave Mueller <dave.mueller@gmx.ch> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-17[CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in ↵John Villalovos
notification message Removing the SMT/HT check, since the Errata doesn't mention Hyper-Threading. Adding in a printk, so that the user knows why acpi-cpufreq refuses to load. Also, once system is blacklisted, don't repeat checks to see if blacklisted. This also causes the message to only be printed once, rather than for each CPU. Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-17[CPUFREQ] powernow-k8: Fix test in get_transition_latency()Roel Kluin
Not makes it a bool before the comparison. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-17[CPUFREQ] longhaul: select Longhaul version 2 for capable CPUsKrzysztof Helt
There is a typo in the longhaul detection code so only Longhaul v1 or Longhaul v3 is selected. The Longhaul v2 is not selected even for CPUs which are capable of. Tested on PCChips Giga Pro board. Frequency changes work and the Longhaul v2 detects that the board is not capable of changing CPU voltage. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-18sh: Fixup last users of irq_chip->typenameThomas Gleixner
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-17omap3: clock: Fixed dpll3_m2x2 rate calculationTero Kristo
Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak
Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-17Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g20ek modify dual slot evaluation kit
2009-11-17Merge branch 'hostprogs-wmissing-prototypes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc * 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc: Makefile: Add -Wmising-prototypes to HOSTCFLAGS oss: Mark loadhex static in hex2hex.c dtc: Mark various internal functions static dtc: Set "noinput" in the lexer to avoid an unused function drm: radeon: Mark several functions static in mkregtable arch/sparc/boot/*.c: Mark various internal functions static arch/powerpc/boot/addRamDisk.c: Mark several internal functions static arch/alpha/boot/tools/objstrip.c: Mark "usage" static Documentation/vm/page-types.c: Declare checked_open static genksyms: Mark is_reserved_word static kconfig: Mark various internal functions static kconfig: Make zconf.y work with current bison
2009-11-17fcntl: Use consistent values for F_[GS]ETOWN_EXStephen Rothwell
These values were only introduced during this release cycle, so it is still early enough to get them right. alpha uses the same values that are in asm-generic/fcntl.h, so just remove them. parisc uses the values interchanged for no apparent reason, so remove them to give us consistency across all architectures. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-16omap: Fix keymap for zoom2 according to matrix keypad framworkVimal Singh
Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-16Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-17[ARM] pxa: ensure mfp is in correct range in mfp_{read,write}Roel Kluin
Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17[ARM] pxa/hx4700: fix hx4700 touchscreen pressure valuesPaul Parsons
hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-16Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-11-16ARM: 5787/1: U300 COH 901 331 fixesLinus Walleij
This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16at91: at91sam9g20ek modify dual slot evaluation kitNicolas Ferre
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-15arch/sparc/boot/*.c: Mark various internal functions staticJosh Triplett
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-15arch/powerpc/boot/addRamDisk.c: Mark several internal functions staticJosh Triplett
Nothing outside of arch/powerpc/boot/addRamDisk.c references the functions "get4k", "put4k", or "death". Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-15arch/alpha/boot/tools/objstrip.c: Mark "usage" staticJosh Triplett
Nothing outside of arch/alpha/boot/tools/objstrip.c references the usage function. Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-14Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: SMTC: Fix lockup in smtc_distribute_timer MIPS: TXx9: Update rbtx49xx_defconfig MIPS: Make local arrays with CL_SIZE static __initdata MIPS: Add DMA declare coherent memory support MIPS: Fix emulation of 64-bit FPU on FPU-less 64-bit CPUs.
2009-11-13[ARM] Kirkwood: disable propagation of mbus error to the CPU local busLennert Buytenhek
Disable propagation of mbus errors to the CPU local bus, as this causes mbus errors (which can occur for example for PCI aborts) to throw CPU aborts, which we're not set up to deal with. Reported-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13MIPS: SMTC: Fix lockup in smtc_distribute_timerKevin D. Kissell
1. At the end of smtc_distribute_timer, nextstamp is valid and has already passed so we goto repeat. 2. Nothing updates nextstamp (only updated if the timeout is in the future And we just decided it is in the past) 3. At the end nextstamp still has the same value so it is still valid and in the past. 4. This repeats until read_c0_count has a value which causes nextstamp to be in the future. Reported and initial patch and testing by Mikael Starvik <mikael.starvik@axis.com>. Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: linux-mips@linux-mips.org Cc: Jesper Nilsson <Jesper.Nilsson@axis.com> Patchwork: http://patchwork.linux-mips.org/patch/621/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13MIPS: TXx9: Update rbtx49xx_defconfigAtsushi Nemoto
Enable following features: * MTD (RBTX4939, NAND_TXX9NDFMC) * HW_RANDOM (HW_RANDOM_TX4939) * SOUND (SND_SOC_TXX9ACLC) * DMADEVICE (TXX9_DMAC) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13MIPS: Make local arrays with CL_SIZE static __initdataAtsushi Nemoto
Since commit 22242681cff52bfb7cba5d2a37b91802be7a4e4c ("MIPS: Extend COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this size will cause an build failure with default CONFIG_FRAME_WARN settings. Although current users of such array variables are all early bootstrap code and not likely to cause real stack overflow (thread_info corruption), it is preferable to to declare these arrays static with __initdata. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13MIPS: Add DMA declare coherent memory supportYoichi Yuasa
The ohci-sm501 driver requires dma_declare_coherent_memory(). It is used by the driver's local memory allocation with dma_alloc_coherent(). Tested on TANBAC TB0287(VR4131 + SM501). [Ralf: Fixed reject in dma-default.c and removed the entire #if 0'ed block in dma-mapping.h instead of just the #if 0.] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13MIPS: Fix emulation of 64-bit FPU on FPU-less 64-bit CPUs.David Daney
Running a 64-bit kernel on a 64-bit CPU without an FPU would cause the emulator to run in 32-bit mode. The c0_Status.FR bit is wired to zero on systems without an FPU, so using that bit to decide how the emulator behaves doesn't allow for proper emulation on 64-bit FPU-less processors. Instead, we need to select the emulator mode based on the user-space ABI. Since the thread flag TIF_32BIT_REGS is used to set c0_Status.FR, we can just use it to decide if the emulator should be in 32-bit or 64-bit mode. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13[S390] s390: fix single stepping on svc0Christian Borntraeger
On s390 there are two ways of specifying the system call number for the svc instruction. The standard way is to use the immediate field in the instruction (or to use EXecute for values unknown during assemble time). This can encode 256 system calls. The kernel ABI also allows to put the system call number in r1 and then execute svc 0 to enable system call numbers > 255. It turns out that single stepping svc 0 is broken, since the PER program check handler uses r1. We have to use a different register. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-11-13[S390] reset cputime accounting after IPL from NSSMartin Schwidefsky
After an IPL from NSS the uptime of the system is incorrect. The reason is that the startup code in head.S is not executed in case of an IPL from NSS. Due to that sched_clock_base_cc which is used to initialze wall_to_monotonic contains the time stamp when the NSS has been created instead of the time stamp of the system start. Reinitialize the cputime accounting values in create_kernel_nss after the SAVESYS CP command that created the NSS segment. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-11-13[ARM] pxa: fix incorrect mfp_to_gpio() conversionEric Miao
Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer valid for those additional pins, fix it. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa/colibri: fix AC97 ifdefs and add missing includeMarek Vasut
The AC97 part wasn't initialized on Colibri/PXA320 because the macros were wrong. Also, the code didn't compile because of a header file not being included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa: fix missing underscores in mfp-pxa910.hRoel Kluin
Underscores were missing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=yMarc Zyngier
Commit d2c37068429b29d6549cf3486fc84b836689e122 ([ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling) broke ISA interrupt support on pxa27x/3xx. In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from ICHP must be offset by PXA_IRQ(0). Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS enabled and disabled. Signed-off-by: Marc Zyngier <maz@misterjones.org> Tested-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-12Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
2009-11-12alpha: move THREAD_SIZE definition outside #ifndef ASSEMBLYAndrew Morton
arch/alpha/kernel/vmlinux.lds.S uses it: arch/alpha/kernel/vmlinux.lds:241: undefined symbol `THREAD_SIZE' referenced in expression Seems to have been caused by commit 9d93f00580243cc059510d9d6ac4d2f5e97e5b83 Author: Geoffrey Thomas <geofft@ksplice.com> AuthorDate: Thu Sep 24 10:36:26 2009 -0400 Commit: Linus Torvalds <torvalds@linux-foundation.org> CommitDate: Thu Sep 24 17:16:22 2009 -0700 alpha: Clean up linker script using new linker script macros. Note that .data.page_aligned and .data.cacheline_aligned are now after _data; it was probably a bug that they were before it. Also, some explicit ALIGN(8)'s between various initcall sections were removed; this should be harmless as the implicit alignment of initcall_t was already 8. Cc: Geoffrey Thomas <geofft@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-12alpha: fix F_SETOWN_EX and F_GETLK64 conflictPeter Zijlstra
Fix a bug in commit ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5 Author: Peter Zijlstra <a.p.zijlstra@chello.nl> AuthorDate: Wed Sep 23 15:57:03 2009 -0700 Commit: Linus Torvalds <torvalds@linux-foundation.org> CommitDate: Thu Sep 24 07:21:01 2009 -0700 fcntl: add F_[SG]ETOWN_EX In asm-generic/fcntl.h, F_SETOWN_EX and F_GETLK64 both have value 12, and F_GETOWN_EX and F_SETLK64 both have value 13. Reported-by: "Joseph S. Myers" <joseph@codesourcery.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Andreas Schwab <schwab@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-11omap3: Decrease cpufreq transition latencyMike Turquette
Adjust OMAP3 frequency transition latency from 10,000,000uS to a more reasonable 300,000uS. This causes ondemand and conservative governors to sample CPU load more often resulting in more responsive behavior. Tested on Android 2.6.29; using this value and conservative governor, CORE power consumption on Zoom2 was comparable to the old and unresponsive 10,000,000uS value while UI responsiveness was greatly improved. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 08:44:39 +0000