aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-02-09mach-gta02: Fix mmc regulator constrainsLars-Peter Clausen
2010-01-22Merge branch 'gta02-machine-2.6.32' into gta02-machine-devices-2.6.32Lars-Peter Clausen
Conflicts: arch/arm/mach-s3c2442/include/mach/gta02.h arch/arm/mach-s3c2442/mach-gta02.c
2010-01-22gta02: Those changes were lost during merging...Lars-Peter Clausen
2010-01-22gta02: Configure pcf50633-gpio device and add a regulator device whichLars-Peter Clausen
represents the power switch in front of the gsm modem.
2010-01-22Replace glamo gpio probe callback with generic solution.Lars-Peter Clausen
2010-01-22Instead of adding a probe_completed callback to each an every driver install aLars-Peter Clausen
bus notify handler and handle this in a generic way.
2010-01-22gta02: Configure pcf50633-gpio device and add a regulator device whichLars-Peter Clausen
represents the power switch in front of the gsm modem.
2010-01-22Instead of adding a probe_completed callback to each an every driver install aLars-Peter Clausen
bus notify handler and handle this in a generic way.
2010-01-22Merge branch 'gta02-machine-2.6.32' into gta02-machine-devices-2.6.32Lars-Peter Clausen
Conflicts: arch/arm/mach-s3c2442/Kconfig arch/arm/mach-s3c2442/Makefile arch/arm/mach-s3c2442/mach-gta02.c
2010-01-17mach-gta02: Fix mmc regulator constrainsLars-Peter Clausen
2009-12-27gta02: Use correct touchscreen device.Lars-Peter Clausen
Fixes resume.
2009-12-21gta02: Specify valid_ops_mask for regulator consumers.Lars-Peter Clausen
2009-12-21Use dev_pm_opsLars-Peter Clausen
2009-12-11gta02: Select s3c_device_nandLars-Peter Clausen
2009-12-11gta02: Use hw pwm for power leds and vibrator.Lars-Peter Clausen
2009-12-11gta02: add support for platform_batteryPaul Fertser
This adds support for platform_battery driver which allows to specify a set of power supply properties and callbacks to acquire them. It is needed to support dumb batteries where all the information about their status can only be obtained by platform-specific actions such as specific ADC measurements, some guessimation etc. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2009-12-11gta02: Replace platform backlight driver with pcf50633-backlight.Lars-Peter Clausen
2009-12-11Add touchscreen device.Nelson Castillo
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
2009-12-11gta02: Add glamo mfd irq base to glamo resourcesLars-Peter Clausen
... and remove unused reset pin resource.
2009-12-11gta02: Set pcf50633 chg_ref_current_maLars-Peter Clausen
2009-12-11gta02: Add power supply consumers.Lars-Peter Clausen
2009-12-11gta02: Add battery driverLars-Peter Clausen
2009-12-07gta02: Add fiq handlerLars-Peter Clausen
2009-12-07Add jbt6k74 deviceLars-Peter Clausen
2009-12-07gta02: Add glamo deviceLars-Peter Clausen
2009-12-07Select usb host device.Lars-Peter Clausen
2009-12-06gta02: Disable hardware ECC unless we get instructed to enable itHolger Freyther
Early verions off uboot used for the gta02 flashed the nand with ecc information incompatible to s3c2442 hardware ecc. Disable hardware error correction by default, unless the bootloader explicitly enables it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06gta02: request usb pullup pin before using it.Lars-Peter Clausen
2009-12-06gta02: Include mach/regs-gpioj.hLars-Peter Clausen
2009-12-06Select usb host device.Lars-Peter Clausen
2009-12-06Add power management devices.Lars-Peter Clausen
2009-12-06ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlierLars-Peter Clausen
On hardware revision 5 and earlier the leds found on the gta02 are missing a resistor and reading their gpio pin status will always return 0. So we have to shadow the led states in software. This is done by "hijacking" the gpio accessor functions for bank B. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06ARM: gta02: Add LED supportLars-Peter Clausen
The gta02 has three leds which are connected though gpio pins and thus can get supported by using the generic leds-gpio driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06ARM: gta02: Add button supportLars-Peter Clausen
The gta02 has two buttons which are connected to gpio pins and thus can get supported by using the generic gpio-keys driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-02MIPS: RB532: Fix devices.c compilation.Florian Fainelli
We should now use dev_set_drvdata to set the driver driver_data field. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/747/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02MIPS: Fix MIPS I build.Ralf Baechle
Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp. f1e39a4a616cd9981a9decfd5332fd07a01abb8b (kernel.org). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/746/
2009-12-01Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Loongson: Switch from flatmem to sparsemem MIPS: Loongson: Disallow 4kB pages MIPS: Add missing definition for MADV_HWPOISON. MIPS: Fix build error if __xchg() is not getting inlined. MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
2009-12-01MIPS: Loongson: Switch from flatmem to sparsememWu Zhangjin
With flatmem hibernation for Loongson will fail, and there are also some other problems such as broken files when using NFS or CIFS / Samba. The config help of sparsemem says: "This option provides some potential performance benefits, along with decreased code complexity." So to avoid the potential problems of FLATMEM, we disable FLATMEM directly and use SPARSEMEM instead. Related email thread: http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9b Reported-by: Tatu Kilappa <tatu.kilappa@gmail.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/737/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01MIPS: Loongson: Disallow 4kB pagesWu Zhangjin
Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on: Kernel panic - not syncing: Attempted to kill init! The possible reason is the cache aliases problem: Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger then 4kb. so, If using 4kb page size, there is cache aliases problem. To avoid this kind of problem, extra cache flushing. The 2nd possible solution is 16kb page size which avoids cache aliases without the need for extra cache flushes. So we disable 4kB pages until the aliasing issue is solved. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/736/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01MIPS: Add missing definition for MADV_HWPOISON.Ralf Baechle
Thanks to Joseph S. Myers for reporting this. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Joseph S. Myers" <joseph@codesourcery.com> Patchwork: http://patchwork.linux-mips.org/patch/723/
2009-12-01MIPS: Fix build error if __xchg() is not getting inlined.Ralf Baechle
If __xchg() is not getting inlined the outline version of the function will have a reference to __xchg_called_with_bad_pointer() which does not exist remaining. Fixed by using BUILD_BUG_ON() to check for allowable operand sizes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/705/
2009-12-01MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.Martin Michlmayr
Some Debian users have reported that the kernel hangs early during boot on some IP22 systems. Thomas Bogendoerfer found that this is due to a "bad interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during early boot". Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: linux-mips@linux-mips.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Fixup last users of irq_chip->typename Alpha: Rearrange thread info flags fixing two regressions arch/alpha/kernel: Add kmalloc NULL tests arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST
2009-11-30alpha: Fixup last users of irq_chip->typenameThomas Gleixner
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2009-11-30Alpha: Rearrange thread info flags fixing two regressionsMichael Cree
The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b54249b "remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect setting of the unaligned access control flags by the prctl syscall. The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83f39f "KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]" further caused problems, namely incorrect operands to assembler code as evidenced by: AS arch/alpha/kernel/entry.o arch/alpha/kernel/entry.S: Assembler messages: arch/alpha/kernel/entry.S:326: Warning: operand out of range (0x0000000000000406 is not between 0x0000000000000000 and 0x00000000000000ff) Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be in lower 8 bits of the thread info flags, and (2) making sure that ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: David Howells <dhowells@redhat.com>, Signed-off-by: Matt Turner <mattst88@gmail.com>
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: fix SMP build error in start_thread() Blackfin: fix memset in smp_send_reschedule() and -stop() Blackfin: fix typo in ptrace poking Blackfin: check for anomaly 05000475 Blackfin: work around testset anomaly 05000477 Blackfin: update anomaly lists Blackfin: fix cache Kconfig typo Blackfin: fix suspend/resume failure with some on-chip ROMs
2009-11-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT MAINTAINERS: add maintainer information for AMBA primecell drivers [ARM] pxa/spitz: fix compile regression on spitz ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq [ARM] pxa/cpufreq: fix index assignments for end marker ARM: PNX4008: fix watchdog device driver name [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled
2009-11-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix DEBUG_HIGHMEM build break from d4515646699
2009-12-01powerpc: Fix DEBUG_HIGHMEM build break from d4515646699Becky Bruce
Code was added to mm/higmem.c that depends on several kmap types that powerpc does not support. We add dummy invalid definitions for KM_NMI, KM_NM_PTE, and KM_IRQ_PTE. According to list discussion, this fix should not be needed anymore starting with 2.6.33. The code is commented to this effect so hopefully we will remember to remove this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunsu: Use sunserial_console_termios() in sunsu_console_setup(). sunsu: Pass true 'ignore_line' to console match when RSC or LOM console. serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). serial: suncore: Add 'ignore_line' argument to sunserial_console_match(). sunsu: Fix detection of SU ports which are RSC console or control. sunsab: Do not set sunsab_reg.cons right before registering minors. sparc64: Fix definition of VMEMMAP_SIZE.