aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2006-09-03[PATCH] powerpc: Fix typo in powermac platform functionsBenjamin Herrenschmidt
New sparse caught that typo which could have caused erratic hardware behaviour on some machines if the platform functions are used by the firmware to change bits in some FCR registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3762/1: Fix ptrace cache coherency bug for ARM1136 VIPT nonaliasing Harvard caches [ARM] 3765/1: S3C24XX: cleanup include/asm-arm/arch-s3c2410/dma.h [ARM] 3764/1: S3C24XX: change type naming to kernel style [ARM] 3763/1: add both rtcs to csb337 defconfig [ARM] Fix ARM __raw_read_trylock() implementation [ARM] 3750/3: Fix double VFP emulation for EABI kernels
2006-09-02[ARM] 3762/1: Fix ptrace cache coherency bug for ARM1136 VIPT nonaliasing ↵George G. Davis
Harvard caches Patch from George G. Davis Resolve ARM1136 VIPT non-aliasing cache coherency issues observed when using ptrace to set breakpoints and cleanup copy_{to,from}_user_page() while we're here as requested by Russell King because "it's also far too heavy on non-v6 CPUs". NOTES: 1. Only access_process_vm() calls copy_{to,from}_user_page(). 2. access_process_vm() calls get_user_pages() to pin down the "page". 3. get_user_pages() calls flush_dcache_page(page) which ensures cache coherency between kernel and userspace mappings of "page". However flush_dcache_page(page) may not invalidate I-Cache over this range for all cases, specifically, I-Cache is not invalidated for the VIPT non-aliasing case. So memory is consistent between kernel and user space mappings of "page" but I-Cache may still be hot over this range. IOW, we don't have to worry about flush_cache_page() before memcpy(). 4. Now, for the copy_to_user_page() case, after memcpy(), we must flush the caches so memory is consistent with kernel cache entries and invalidate the I-Cache if this mm region is executable. We don't need to do anything after memcpy() for the copy_from_user_page() case since kernel cache entries will be invalidated via the same process above if we access "page" again. The flush_ptrace_access() function (borrowed from SPARC64 implementation) is added to handle cache flushing after memcpy() for the copy_to_user_page() case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-01[PATCH] powerpc: Fix PowerMac IRQ handling bugBenjamin Herrenschmidt
The port to genirq & the new powerpc interrupt model in 2.6.18 introduced a bug in the legacy PowerMac PIC code (used on older machines) because of a typo potentially causing hangs due to interrupt storms. This fixes it, along with a performance issue causing us to do spurrious retriggers after masking an interrupt. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01[PATCH] xtensa: ptrace: EXIT_ZOMBIE fixBill Huey (hui
We're testing the wrong task_struct field. Acked-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01[PATCH] Fix faulty HPET clocksource usage (fix for bug #7062)john stultz
Apparently some systems export valid HPET addresses, but hpet_enable() fails. Then when the HPET clocksource starts up, it only checks for a valid HPET address, and the result is a system where time does not advance. See http://bugme.osdl.org/show_bug.cgi?id=7062 for details. This patch just makes sure we better check that the HPET is functional before registering the HPET clocksource. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-31Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: unsolicited interrupts during sense pgid. [S390] cio: no path after machine check. [S390] cio: kernel stack overflow. [S390] dasd: fix device shutdown process. [S390] broken copy_in_user function.
2006-08-31[ARM] 3764/1: S3C24XX: change type naming to kernel styleBen Dooks
Patch from Ben Dooks The type naming in the s3c24xx dma code is riddled with typedefs creating _t types, from the code import from 2.4 which is contrary to the current Kernel coding style. This patch cleans this up, removing the typedefs and and fixing up the resultant code changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-31[ARM] 3763/1: add both rtcs to csb337 defconfigDavid Brownell
Patch from David Brownell This adds RTC support to the csb337 default config. Both the AT91 and the ds1307 RTCs are enabled (rtc0 and rtc1 respectively). The ds1307 is used to initialize the system time, since it's battery-backed. From then on the AT91 RTC is used, since it's more capable (with both alarm and update irqs, and system wakeup capability) even though it needs manual initialization (symlink /dev/rtc to /dev/rtc0 for older versions of hwclock, then "hwclock --systohc") in an rc script or from inittab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix return value from memcpy [POWERPC] iseries: Define insw et al. so libata/ide will compile [POWERPC] Fix irq enable/disable in smp_generic_take_timebase [POWERPC] Fix problem with time not advancing on 32-bit platforms [POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.S [POWERPC] Fix up ibm_architecture_vec definition [POWERPC] Make OF irq map code detect more error cases [POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2 [POWERPC] Fix MPIC sense codes in documentation [POWERPC] Fix performance regression in IRQ radix tree locking [POWERPC] Add mpc7448hpc2 device tree source file [POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts [POWERPC] modify mpc83xx platforms to use new IRQ layer [POWERPC] Adapt ipic driver to new host_ops interface, add set_irq_type to set IRQ sense [POWERPC] back up old school ipic.[hc] to arch/ppc [POWERPC] Use mpc8641hpcn PIC base address from dev tree. [POWERPC] Allow MPC8641 HPCN to build with CONFIG_PCI disabled too. [POWERPC] Fix powerpc 44x_mmu build [POWERPC] Remove flush_dcache_all export
2006-08-30[PATCH] ppc32: fix last_jiffy time comparisonPaul Mackerras
This fixes a hang on ppc32. The problem was that I was comparing a 32-bit quantity with a 64-bit quantity, and consequently time wasn't advancing. This makes us use a 64-bit quantity on all platforms, which ends up simplifying the code since we can now get rid of the tb_last_stamp variable (which actually fixes another bug that Ben H and I noticed while going carefully through the code). This works fine on my G4 tibook. Let me know how it goes on your machines. Acked-by: Olaf Hering <olaf@aepfle.de> Acked-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-31[POWERPC] Fix return value from memcpyPaul Mackerras
As pointed out by Herbert Xu <herbert@gondor.apana.org.au>, our memcpy implementation didn't return the destination pointer as its return value, and there is code in the kernel that expects that. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Increase default nodes shift to 10, nr_cpus to 1024 [IA64] remove redundant local_irq_save() calls from sn_sal.h [IA64] panic if topology_init kzalloc fails [IA64-SGI] Silent data corruption caused by XPC V2.
2006-08-30[PATCH] x86_64: Don't write out segments from vsyscall32 DSO if it is not mappedSuleiman Souhlal
It's possible to get an invalid page fault in kernel mode when we try to write out segments from vsyscall32 when dumping core for a 32bit process if the vsyscall32 DSO is not mapped in its address space (which can happen if, for example, ulimit -v 100 is run). Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86_64: Save original IST values for checking stack addressesKeith Owens
The values in init_tss.ist[] can change when an IST event occurs. Save the original IST values for checking stack addresses when debugging or doing stack traces. Signed-off-by: Keith Owens <kaos@ocs.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] i386: Fix stack switching in do_IRQAndi Kleen
There was a bogus hunk from the genirq merge that essentially broke stack switching for hard interrupts. Remove it since it isn't needed. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86: Disable MMCONFIG on Intel SDV using DMI blacklistAndi Kleen
As a replacement for the earlier removal of the e820 MCFG check we blacklist the Intel SDV with the original BIOS bug that motivated that check. On those machines don't use MMCONFIG. This also adds a new pci=mmconf parameter to override the blacklist. Cc: Greg KH <gregkh@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86_64: Recover 1MB of kernel memoryAndi Kleen
Noticed by Jan Beulich. When the kernel was moved from 1MB to 2MB in 2.6.17 the kernel reservation code wasn't adjusted and it still reserved starting with 1MB. This means 1MB always were lost. This patch fixes this by reserving only starting with _text. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86: Make backtracer fallback logic more bullet-proofJan Beulich
The unwinder fallback logic still had potential for falling through to the legacy stack trace code without printing an indication (at once serving as a separator) of this. Further, the stack pointer retrieval for the fallback should be as restrictive as possible (in order to avoid having the legacy stack tracer try to access invalid memory). The patch tightens that, but this could certainly be further improved. Also making the call_trace command line option now conditional upon CONFIG_STACK_UNWIND (as it's meaningless otherwise). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] i386: Add kernel thread stack frame termination for properly ↵Andi Kleen
stopping stack unwinds. One open question: Should this added push perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: not needed, these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86_64: Add kernel thread stack frame termination for properly ↵Andi Kleen
stopping stack unwinds. One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86: Revert e820 MCFG heuristicsAndi Kleen
The check for the MCFG table being reserved in the e820 map was originally added to detect a broken BIOS in a preproduction Intel SDV. However it also breaks the Apple x86 Macs, which can't supply this properly, but need a working MCFG. With this patch they wouldn't use the MCFG and not work. After some discussion I think it's best to remove the heuristic again. It also failed on some other boxes (although it didn't cause much problems there because old style port access for PCI config space still works as fallback), but the preproduction SDVs can just use pci=nommcfg. Supporting production machines properly is more important. Edgar Hucek did all the debugging work. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86_64: Update defconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[ARM] 3750/3: Fix double VFP emulation for EABI kernelsDaniel Jacobowitz
Patch from Daniel Jacobowitz vfp_put_double didn't work in a CONFIG_AEABI kernel. By swapping the arguments, we arrange for them to be in the same place regardless of ABI. I made the same change to vfp_put_float for consistency. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-30[S390] broken copy_in_user function.Martin Schwidefsky
The copy_in_user primitive does not work as advertised. If the source and target area are available copy_in_user copies one byte too much. If one of the memory areas is not available it does not copy as much data as it can, but up to 257 bytes less. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-30[POWERPC] Fix irq enable/disable in smp_generic_take_timebasePaul Mackerras
Eran Ben-Avi <eranpublic@yahoo.com> pointed out that the arch/ppc version of smp_generic_take_timebase disables interrupts on entry but exits without restoring them. However, both it and the arch/powerpc version have another problem, which is that they use local_irq_disable/enable rather than local_irq_save/restore, and they are called with interrupts disabled. This fixes both problems; it changes a return to a break in the arch/ppc version, and changes both versions to use local_irq_save/restore. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Fix problem with time not advancing on 32-bit platformsPaul Mackerras
This fixes a problem introduced in 5db9fa9593e2ff69f2b95f9d59229dc4faaa564d. The last_jiffy per-cpu variable is only 32 bits on 32-bit machines, but it was being compared with a 64-bit quantity (tb_next_jiffy), which resulted in time not advancing. This fixes it by changing last_jiffy to be 64 bits on all platforms. With this, we no longer need tb_last_stamp as a 32-bit version of tb_last_jiffy, so this gets rid of tb_last_stamp and we just use tb_last_jiffy instead. This also fixes a bug when the boot cpu is not online, because using tb_last_stamp could have caused the wrong timebase origin value to be used when calculating the time of day. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.SPaul Mackerras
This code got moved from head.S but the copyright notice on head.S didn't get transferred with it. Noticed by Cort Dougan <cort@fsmlabs.com>. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Fix up ibm_architecture_vec definitionWill Schmidt
This problem was noticed by one of the Phyp firmware folks. Our ibm,client-architecture-support call was failing. This corrects the vector length parameters being passed in. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Make OF irq map code detect more error casesBenjamin Herrenschmidt
Device-tree bugs on js20 with some versions of SLOF were causing the interrupt for IDE to not be parsed correctly and fail to boot. This patch adds a bit more sanity checking to the parser to detect some of those errors and fail instead of returning bogus information. The powerpc PCI code can then trigger a fallback that works on those machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2Zang Roy-r61911
This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-29[SPARC64]: Fix X server hangs due to large pages.David S. Miller
This problem was introduced by changeset 14778d9072e53d2171f66ffd9657daff41acfaed Unlike the hugetlb code paths, the normal fault code is not setup to propagate PTE changes for large page sizes correctly like the ones we make for I/O mappings in io_remap_pfn_range(). It is absolutely necessary to update all sub-ptes of a largepage mapping on a fault. Adding special handling for this would add considerably complexity to tlb_batch_add(). So let's just side-step the issue and forcefully dirty any writable PTEs created by io_remap_pfn_range(). The only other real option would be to disable to large PTE code of io_remap_pfn_range() and we really don't want to do that. Much thanks to Mikael Pettersson for tracking down this problem and testing debug patches. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-30[POWERPC] Fix performance regression in IRQ radix tree lockingBenjamin Herrenschmidt
When reworking the powerpc irq code, I figured out that we were using the radix tree in a racy way. As a temporary fix, I put a spinlock in there. However, this can have a significant impact on performances. This patch reworks that to use a smarter technique based on the fact that what we need is in fact a rwlock with extremely rare writers (thus optimized for the read path). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Add mpc7448hpc2 device tree source fileZang Roy-r61911
This patch adds the mpc7448hpc2 device tree source file. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dtsKim Phillips
Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] modify mpc83xx platforms to use new IRQ layerKim Phillips
This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code. renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Adapt ipic driver to new host_ops interface, add set_irq_type to ↵Kim Phillips
set IRQ sense This converts ipic code to Benh's IRQ mods. For the IPIC, IRQ sense values in the device tree equal those in include/linux/irq.h; that's 8 for low assertion (most internal IRQs on mpc83xx), and 2 for high-to-low change. spinlocks added to [un]mask, ack operations; default handler and type now set in host_map; and redundant condition check eliminated. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] back up old school ipic.[hc] to arch/ppcKim Phillips
Keep from breaking 83xx arch/ppc build. Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-29[IA64] Increase default nodes shift to 10, nr_cpus to 1024Christoph Lameter
Change both the NODES_SHIFT and the NR_CPUS so that even big machines can boot all nodes and processors with a generic kernel. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-08-28Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers [ARM] Add Integrator support for glibc outb() and friends [ARM] Move prototype for register_isa_ports to asm/io.h [ARM] Arrange for isa.c to use named initialisers [ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems [ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en [ARM] 3758/1: Preserve signalling NaNs in conversion [ARM] 3749/3: Correct VFP single/double conversion emulation [ARM] 3748/3: Correct error check in vfp_raise_exceptions
2006-08-28[ARM] 3761/1: fix armv4t breakage after adding thumb interworking to ↵Lennert Buytenhek
userspace helpers Patch from Lennert Buytenhek On armv4t systems, we have always compiled the kernel with -march=armv4 instead of -march=armv4t, which means that any use of bx will bomb out. Commit ba9b5d76372dc290b6ca04dad93927a22c2ac49a introduced the use of bx in the kernel, which means we need to compile with -march=armv4t on armv4t systems now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Add Integrator support for glibc outb() and friendsRussell King
Add the necessary call to register_isa_ports() so that glibc knows where these are found on Integrator platforms. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Move prototype for register_isa_ports to asm/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] Arrange for isa.c to use named initialisersRussell King
Convert isa.c (the glibc interface for emulating ISA IO) to use named initialisers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[PATCH] x86: NUMAQ Kconfig fixKAMEZAWA Hiroyuki
When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] cpufreq: acpi-cpufreq: Ignore failure from acpi_cpufreq_early_init_acpiDave Jones
Ignore the return value of early_init_acpi(), as it can give false error messages. If there is something really wrong, then register_driver will fail cleanly with EINVAL later. [ background: modprobe acpi-cpufreq on systems not capable of speed-scaling started failing with 'invalid argument', where previously it would only ever -ENODEV I'm not 100% happy with the solution. It'd be better to handle failure properly, but this is a low-impact change for 2.6.18 We can always revisit doing this better in .19 --davej.] Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systemsDavid Brownell
Patch from David Brownell Remove buld warning when building sa1111 on non-sa1100 platforms (e.g. PXA). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3760/1: This patch adds timeouts while working with SSP registers. ↵Paul Sokolovsky
Such timeouts were en Patch from Paul Sokolovsky This patch adds timeouts while working with SSP registers. Such timeouts were envisioned by docstrings in ssp.c, but were not implemented. There were actual lockups while accessing touchscreen for iPaqs h1910, h4000 due to lack of the timeouts. This is updated version of previously submitted patch: 3738/1. Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3758/1: Preserve signalling NaNs in conversionDaniel Jacobowitz
Patch from Daniel Jacobowitz The fcvtds and fcvtsd instructions were generating a qnan bit pattern for both quiet and signalling NaNs. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[ARM] 3749/3: Correct VFP single/double conversion emulationDaniel Jacobowitz
Patch from Daniel Jacobowitz The fcvtsd/fcvtds emulation was left behind when the numbering of double precision registers was changed from 0-30 to 0-15. Both conversion instructions were writing their results to the wrong register. Also, the conversion instructions should stop after the first element even if a vector length is specified. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>