aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-08-09Merge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Avoid redelivery of edge interrupt before next edge KVM: MMU: limit rmap chain length KVM: ia64: fix build failures due to ia64/unsigned long mismatches KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpc KVM: fix ack not being delivered when msi present KVM: s390: fix wait_queue handling KVM: VMX: Fix locking imbalance on emulation failure KVM: VMX: Fix locking order in handle_invalid_guest_state KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in kvm_mmu_change_mmu_pages KVM: SVM: force new asid on vcpu migration KVM: x86: verify MTRR/PAT validity KVM: PIT: fix kpit_elapsed division by zero KVM: Fix KVM_GET_MSR_INDEX_LIST
2009-08-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix buffer overflow in efi_init() x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus x86: Fix VMI && stack protector
2009-08-09x86: fix buffer overflow in efi_init()Roel Kluin
If the vendor name (from c16) can be longer than 100 bytes (or missing a terminating null), then the null is written past the end of vendor[]. Found with Parfait, http://research.sun.com/projects/parfait/ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com>
2009-08-08x86: Add quirk to make Apple MacBookPro5,1 use reboot=pciOzan Çağlayan
MacBookPro5,1 is not able to reboot unless reboot=pci is set. This patch forces it through a DMI quirk specific to this device. Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> LKML-Reference: <1249403971-6543-1-git-send-email-ozan@pardus.org.tr> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-08x86: Fix MSI-X initialization by using online_mask for x2apic target_cpusYinghai Lu
found a system where x2apic reports an MSI-X irq initialization failure: [ 302.859446] igbvf 0000:81:10.4: enabling device (0000 -> 0002) [ 302.874369] igbvf 0000:81:10.4: using 64bit DMA mask [ 302.879023] igbvf 0000:81:10.4: using 64bit consistent DMA mask [ 302.894386] igbvf 0000:81:10.4: enabling bus mastering [ 302.898171] igbvf 0000:81:10.4: setting latency timer to 64 [ 302.914050] reserve_memtype added 0xefb08000-0xefb0c000, track uncached-minus, req uncached-minus, ret uncached-minus [ 302.933839] reserve_memtype added 0xefb28000-0xefb29000, track uncached-minus, req uncached-minus, ret uncached-minus [ 302.940367] alloc irq_desc for 265 on node 4 [ 302.956874] alloc kstat_irqs on node 4 [ 302.959452] alloc irq_2_iommu on node 0 [ 302.974328] igbvf 0000:81:10.4: irq 265 for MSI/MSI-X [ 302.977778] alloc irq_desc for 266 on node 4 [ 302.980347] alloc kstat_irqs on node 4 [ 302.995312] free_memtype request 0xefb28000-0xefb29000 [ 302.998816] igbvf 0000:81:10.4: Failed to initialize MSI-X interrupts. ... it turns out that when trying to enable MSI-X, __assign_irq_vector(new, cfg_new, apic->target_cpus()) can not get vector because for x2apic target-cpus returns cpumask_of(0) Update that to online_mask like xapic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4A785AFF.3050902@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-07USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers ARM: S3C64XX: serial: Fix section mismatch warning ARM: S3C24XX: serial: Fix section mismatch warnings ARM: S3C: PWM fix for low duty cycle ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization ARM: 5627/1: Fix restoring of lr at the end of mcount ARM: 5624/1: Document cache aliasing region S3C64XX: Fix ARMCLK configuration S3C64XX: Fix get_rate() for ARMCLK S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip mx3 defconfig update mx27 defconfig update ARM: 5623/1: Treo680: ir shutdown typo fix ARM: includecheck fix: plat-stmp3xxx/pinmux.c ARM: includecheck fix: plat-s3c64xx/pm.c ARM: includecheck fix: mach-omap2/mcbsp.c ARM: includecheck fix: mach-omap1/mcbsp.c ARM: includecheck fix: board-sffsdr.c ...
2009-08-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] KVM: Read buffer overflow [S390] kernel: Storing machine flags early in lowcore
2009-08-07[S390] KVM: Read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-08-07[S390] kernel: Storing machine flags early in lowcoreHendrik Brueckner
Currently, the machine_flags are stored late in the startup initialization which results in failing machine type checks (e.g. for MACHINE_IS_VM). To allow these checks, store the machine flags in the lowcore when the machine type has been detected. Moving the machine_flags to the lowcore has been introduced with git commit 25097bf153391f7be4c591d47061b3dc4990dac2 Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-08-06perf_counter/powerpc: Check oprofile_cpu_type for NULL before using itBenjamin Herrenschmidt
If the current CPU doesn't support performance counters, cur_cpu_spec->oprofile_cpu_type can be NULL. The current perf_counter modules don't test for that case and would thus crash at boot time. Bug reported by David Woodhouse. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-06KVM: MMU: limit rmap chain lengthMarcelo Tosatti
Otherwise the host can spend too long traversing an rmap chain, which happens under a spinlock. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>Hartley Sweeten
<linux/clk.h> should be included to get the base API prototypes. This fixes the following sparse warnings: arch/arm/common/clkdev.c:65:12: warning: symbol 'clk_get_sys' was not declared. Should it be static? arch/arm/common/clkdev.c:79:12: warning: symbol 'clk_get' was not declared. Should it be static? arch/arm/common/clkdev.c:87:6: warning: symbol 'clk_put' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCHHartley Sweeten
preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in driversAndrew Victor
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05KVM: ia64: fix build failures due to ia64/unsigned long mismatchesAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpcStephen Rothwell
Eliminates this compiler warning: arch/powerpc/kvm/../../../virt/kvm/kvm_main.c:1178: error: integer overflow in expression Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: s390: fix wait_queue handlingChristian Borntraeger
There are two waitqueues in kvm for wait handling: vcpu->wq for virt/kvm/kvm_main.c and vpcu->arch.local_int.wq for the s390 specific wait code. the wait handling in kvm_s390_handle_wait was broken by using different wait_queues for add_wait queue and remove_wait_queue. There are two options to fix the problem: o move all the s390 specific code to vcpu->wq and remove vcpu->arch.local_int.wq o move all the s390 specific code to vcpu->arch.local_int.wq This patch chooses the 2nd variant for two reasons: o s390 does not use kvm_vcpu_block but implements its own enabled wait handling. Having a separate wait_queue make it clear, that our wait mechanism is different o the patch is much smaller Report-by: Julia Lawall <julia@diku.dk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: VMX: Fix locking imbalance on emulation failureJan Kiszka
We have to disable preemption and IRQs on every exit from handle_invalid_guest_state, otherwise we generate at least a preempt_disable imbalance. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: VMX: Fix locking order in handle_invalid_guest_stateJan Kiszka
Release and re-acquire preemption and IRQ lock in the same order as vcpu_enter_guest does. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in ↵Marcelo Tosatti
kvm_mmu_change_mmu_pages kvm_mmu_change_mmu_pages mishandles the case where n_alloc_mmu_pages is smaller then n_free_mmu_pages, by not checking if the result of the subtraction is negative. Its a valid condition which can happen if a large number of pages has been recently freed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: SVM: force new asid on vcpu migrationMarcelo Tosatti
If a migrated vcpu matches the asid_generation value of the target pcpu, there will be no TLB flush via TLB_CONTROL_FLUSH_ALL_ASID. The check for vcpu.cpu in pre_svm_run is meaningless since svm_vcpu_load already updated it on schedule in. Such vcpu will VMRUN with stale TLB entries. Based on original patch from Joerg Roedel (http://patchwork.kernel.org/patch/10021/) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: x86: verify MTRR/PAT validityMarcelo Tosatti
Do not allow invalid memory types in MTRR/PAT (generating a #GP otherwise). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: PIT: fix kpit_elapsed division by zeroMarcelo Tosatti
Fix division by zero triggered by latch count command on uninitialized counter. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: Fix KVM_GET_MSR_INDEX_LISTJan Kiszka
So far, KVM copied the emulated_msrs (only MSR_IA32_MISC_ENABLE) to a wrong address in user space due to broken pointer arithmetic. This caused subtle corruption up there (missing MSR_IA32_MISC_ENABLE had probably no practical relevance). Moreover, the size check for the user-provided kvm_msr_list forgot about emulated MSRs. Cc: stable@kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05x86: Fix VMI && stack protectorAlok Kataria
With CONFIG_STACK_PROTECTOR turned on, VMI doesn't boot with more than one processor. The problem is with the gs value not being initialized correctly when registering the secondary processor for VMI's case. The patch below initializes the gs value for the AP to __KERNEL_STACK_CANARY. Without this the secondary processor keeps on taking a GP on every gs access. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: <stable@kernel.org> # for v2.6.30.x LKML-Reference: <1249425262.18955.40.camel@ank32.eng.vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (32 commits) MIPS: Wire up accept4 syscall. MIPS: VPE: Delete unused function get_tc_unused(). MIPS: VPE: Fix bogus indentation. MIPS: VPE: Make various functions static. MIPS: VPE: Free relocation chain on error. MIPS: VPE: Fix compiler warning. MIPS: Module: Make error messages unique. MIPS: Octeon: Run IPI code with interrupts disabled. MIPS: Jazz: Fix read buffer overflow MIPS: Use DIV_ROUND_CLOSEST MIPS: MTX-1: Request button GPIO before setting its direction MIPS: AR7: Override CFLAGS with -Werror MIPS: AR7: Remove unused tnetd7200_get_clock function MIPS: AR7: Use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabled MIPS: Fix read buffer overflow MIPS: AR7: Fix build warning on memory.c MIPS: Octeon PCIe: Make hardware and software bus numbers match. MIPS: RBTX4939: Fix IOC pin-enable register updating MIPS: Simplify and correct interrupt handling for MSP4200 ...
2009-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-2.6: parisc: hppb.c - fix printk format strings parisc: parisc-agp.c - use correct page_mask function parisc: sticore.c - check return values parisc: dino.c - check return value of pci_assign_resource() parisc: hp_sdc_mlc.c - check return value of down_trylock() parisc: includecheck fix for ccio-dma.c parisc: Set correct bit in protection flags parisc: isa-eeprom - Fix loff_t usage parisc: fixed faulty check in lba_pci parisc: Fix read buffer overflow in pdc_stable driver parisc: Fix GOT overflow during module load on 64bit kernel
2009-08-04Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Work around compilation warning in arch/x86/kernel/apm_32.c x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq() x86, 32-bit: Fix double accounting in reserve_top_address() x86: Don't use current_cpu_data in x2apic phys_pkg_id x86, UV: Fix UV apic mode x86, UV: Fix macros for accessing large node numbers x86, UV: Delete mapping of MMR rangs mapped by BIOS x86, UV: Handle missing blade-local memory correctly x86: fix assembly constraints in native_save_fl() x86, msr: execute on the correct CPU subset x86: Fix assert syntax in vmlinux.lds.S x86: Make 64-bit efi_ioremap use ioremap on MMIO regions x86: Add quirk to make Apple MacBook5,2 use reboot=pci x86: Fix CPA memtype reserving in the set_pages_array*() cases x86, pat: Fix set_memory_wc related corruption x86: fix section mismatch for i386 init code
2009-08-04x86: Work around compilation warning in arch/x86/kernel/apm_32.cSubrata Modak
The following fix was initially inspired by David Howells fix few days back: http://lkml.org/lkml/2009/7/9/109 However, Ingo disapproves such fixes as it's dangerous (it can hide future, relevant warnings) - in something as performance-uncritical. So, initialize 'err' to '0' to work around a GCC false positive warning: http://lkml.org/lkml/2009/7/18/89 Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com> Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20090721023226.31855.67236.sendpatchset@subratamodak.linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq()Jack Steiner
In uv_setup_irq(), the call to create_irq() initially assigns IRQ vectors to cpu 0. The subsequent call to assign_irq_vector() in arch_enable_uv_irq() migrates the IRQ to another cpu and frees the cpu 0 vector - at least it will be freed as soon as the "IRQ move" completes. arch_enable_uv_irq() needs to send a cleanup IPI to complete the IRQ move. Otherwise, assignment of GRU interrupts on large systems (>200 cpus) will exhaust the cpu 0 interrupt vectors and initialization of the GRU driver will fail. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090720142840.GA8885@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, 32-bit: Fix double accounting in reserve_top_address()Jan Beulich
With VMALLOC_END included in the calculation of MAXMEM (as of 2.6.28) it is no longer correct to also bump __VMALLOC_RESERVE in reserve_top_address(). Doing so results in needlessly small lowmem. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4A71DD2A020000780000D482@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86: Don't use current_cpu_data in x2apic phys_pkg_idYinghai Lu
One system has socket 1 come up as BSP. kexeced kernel reports BSP as: [ 1.524550] Initializing cgroup subsys cpuacct [ 1.536064] initial_apicid:20 [ 1.537135] ht_mask_width:1 [ 1.538128] core_select_mask:f [ 1.539126] core_plus_mask_width:5 [ 1.558479] CPU: Physical Processor ID: 0 [ 1.559501] CPU: Processor Core ID: 0 [ 1.560539] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.579098] CPU: L2 cache: 256K [ 1.580085] CPU: L3 cache: 24576K [ 1.581108] CPU 0/0x20 -> Node 0 [ 1.596193] CPU 0 microcode level: 0xffff0008 It doesn't have correct physical processor id and will get an error: [ 38.840859] CPU0 attaching sched-domain: [ 38.848287] domain 0: span 0,8,72 level SIBLING [ 38.851151] groups: 0 8 72 [ 38.858137] domain 1: span 0,8-15,72-79 level MC [ 38.868944] groups: 0,8,72 9,73 10,74 11,75 12,76 13,77 14,78 15,79 [ 38.881383] ERROR: parent span is not a superset of domain->span [ 38.890724] domain 2: span 0-7,64-71 level CPU [ 38.899237] ERROR: domain->groups does not contain CPU0 [ 38.909229] groups: 8-15,72-79 [ 38.912547] ERROR: groups don't span domain->span [ 38.919665] domain 3: span 0-127 level NODE [ 38.930739] groups: 0-7,64-71 8-15,72-79 16-23,80-87 24-31,88-95 32-39,96-103 40-47,104-111 48-55,112-119 56-63,120-127 it turns out: we can not use current_cpu_data in phys_pgd_id for x2apic. identify_boot_cpu() is called by check_bugs() before smp_prepare_cpus() and till smp_prepare_cpus() current_cpu_data for bsp is assigned with boot_cpu_data. Just make phys_pkg_id for x2apic is aligned to xapic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A6ADD0D.10002@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Fix UV apic modeJack Steiner
Change SGI UV default apicid mode to "physical". This is required to match settings in the UV hub chip. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143856.GA8905@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Fix macros for accessing large node numbersJack Steiner
The UV chipset automatically supplies the upper bits on nodes being referenced by MMR accesses. These bit can be deleted from the hub addressing macros. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143808.GA8076@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Delete mapping of MMR rangs mapped by BIOSJack Steiner
The UV BIOS has added additional MMR ranges that are mapped via EFI virtual mode mappings. These ranges should be deleted from ranges mapped by uv_system_init(). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143656.GA7698@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Handle missing blade-local memory correctlyJack Steiner
UV blades may not have any blade-local memory. Add a field (nid) to the UV blade structure to indicates whether the node has local memory. This is needed by the GRU driver (pushed separately). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143507.GA7006@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-03x86: fix assembly constraints in native_save_fl()H. Peter Anvin
From Gabe Black in bugzilla 13888: native_save_fl is implemented as follows: 11static inline unsigned long native_save_fl(void) 12{ 13 unsigned long flags; 14 15 asm volatile("# __raw_save_flags\n\t" 16 "pushf ; pop %0" 17 : "=g" (flags) 18 : /* no input */ 19 : "memory"); 20 21 return flags; 22} If gcc chooses to put flags on the stack, for instance because this is inlined into a larger function with more register pressure, the offset of the flags variable from the stack pointer will change when the pushf is performed. gcc doesn't attempt to understand that fact, and address used for pop will still be the same. It will write to somewhere near flags on the stack but not actually into it and overwrite some other value. I saw this happen in the ide_device_add_all function when running in a simulator I work on. I'm assuming that some quirk of how the simulated hardware is set up caused the code path this is on to be executed when it normally wouldn't. A simple fix might be to change "=g" to "=r". Reported-by: Gabe Black <spamforgabe@umich.edu> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Stable Team <stable@kernel.org>
2009-08-03x86, msr: execute on the correct CPU subsetBorislav Petkov
Make rdmsr_on_cpus/wrmsr_on_cpus execute on the current CPU only if it is in the supplied bitmask. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Fix assert syntax in vmlinux.lds.SH. Peter Anvin
Older versions of binutils did not accept the naked "ASSERT" syntax; it is considered an expression whose value needs to be assigned to something. Reported-tested-and-fixed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Make 64-bit efi_ioremap use ioremap on MMIO regionsPaul Mackerras
Booting current 64-bit x86 kernels on the latest Apple MacBook (MacBook5,2) via EFI gives the following warning: [ 0.182209] ------------[ cut here ]------------ [ 0.182222] WARNING: at arch/x86/mm/pageattr.c:581 __cpa_process_fault+0x44/0xa0() [ 0.182227] Hardware name: MacBook5,2 [ 0.182231] CPA: called for zero pte. vaddr = ffff8800ffe00000 cpa->vaddr = ffff8800ffe00000 [ 0.182236] Modules linked in: [ 0.182242] Pid: 0, comm: swapper Not tainted 2.6.31-rc4 #6 [ 0.182246] Call Trace: [ 0.182254] [<ffffffff8102c754>] ? __cpa_process_fault+0x44/0xa0 [ 0.182261] [<ffffffff81048668>] warn_slowpath_common+0x78/0xd0 [ 0.182266] [<ffffffff81048744>] warn_slowpath_fmt+0x64/0x70 [ 0.182272] [<ffffffff8102c7ec>] ? update_page_count+0x3c/0x50 [ 0.182280] [<ffffffff818d25c5>] ? phys_pmd_init+0x140/0x22e [ 0.182286] [<ffffffff8102c754>] __cpa_process_fault+0x44/0xa0 [ 0.182292] [<ffffffff8102ce60>] __change_page_attr_set_clr+0x5f0/0xb40 [ 0.182301] [<ffffffff810d1035>] ? vm_unmap_aliases+0x175/0x190 [ 0.182307] [<ffffffff8102d4ae>] change_page_attr_set_clr+0xfe/0x3d0 [ 0.182314] [<ffffffff8102dcca>] _set_memory_uc+0x2a/0x30 [ 0.182319] [<ffffffff8102dd4b>] set_memory_uc+0x7b/0xb0 [ 0.182327] [<ffffffff818afe31>] efi_enter_virtual_mode+0x2ad/0x2c9 [ 0.182334] [<ffffffff818a1c66>] start_kernel+0x2db/0x3f4 [ 0.182340] [<ffffffff818a1289>] x86_64_start_reservations+0x99/0xb9 [ 0.182345] [<ffffffff818a1389>] x86_64_start_kernel+0xe0/0xf2 [ 0.182357] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.182982] init_memory_mapping: 00000000ffffc000-0000000100000000 [ 0.182993] 00ffffc000 - 0100000000 page 4k This happens because the 64-bit version of efi_ioremap calls init_memory_mapping for all addresses, regardless of whether they are RAM or MMIO. The EFI tables on this machine ask for runtime access to some MMIO regions: [ 0.000000] EFI: mem195: type=11, attr=0x8000000000000000, range=[0x0000000093400000-0x0000000093401000) (0MB) [ 0.000000] EFI: mem196: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB) [ 0.000000] EFI: mem197: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB) [ 0.000000] EFI: mem198: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB) [ 0.000000] EFI: mem199: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB) [ 0.000000] EFI: mem200: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB) [ 0.000000] EFI: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB) This arranges to pass the EFI memory type through to efi_ioremap, and makes efi_ioremap use ioremap rather than init_memory_mapping if the type is EFI_MEMORY_MAPPED_IO. With this, the above warning goes away. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.55858.533494.471153@cargo.ozlabs.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Add quirk to make Apple MacBook5,2 use reboot=pciPaul Mackerras
The latest Apple MacBook (MacBook5,2) doesn't reboot successfully under Linux; neither the EFI reboot method nor the default method using the keyboard controller works (the system just hangs and doesn't reset). However, the method using the "PCI reset register" at 0xcf9 does work. This adds a quirk to detect this machine via DMI and force the reboot_type to BOOT_CF9. With this it reboots successfully without requiring a command-line option. Note that the EFI code forces reboot_type to BOOT_EFI when the machine is booted via EFI, but this overrides that since the core_initcall runs after the EFI initialization code. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.56420.501516.316181@cargo.ozlabs.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Fix CPA memtype reserving in the set_pages_array*() casesThomas Hellstrom
The code was incorrectly reserving memtypes using the page virtual address instead of the physical address. Furthermore, the code was not ignoring highmem pages as it ought to. ( upstream does not pass in highmem pages yet - but upcoming graphics code will do it and there's no reason to not handle this properly in the CPA APIs.) Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13884 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <stable@kernel.org> Cc: dri-devel@lists.sourceforge.net Cc: venkatesh.pallipadi@intel.com LKML-Reference: <1249284345-7654-1-git-send-email-thellstrom@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-03Merge branch 's3c-fixes-rc4-2' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-08-03MIPS: Wire up accept4 syscall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Delete unused function get_tc_unused().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Fix bogus indentation.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Make various functions static.Ralf Baechle
None of these is used outside the VPE loader. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Free relocation chain on error.Ralf Baechle
This may happen if a bad sequence of relocations is being encountered. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Fix compiler warning.Raghu Gandham
Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>