aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-07-21i386: touch_nmi_watchdog() in print_trace_address()Konrad Rzeszutek
Prevent NMI watchdog triggering during long sysrq-T outputs. Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20[SPARC64]: fix section mismatch warning in mdesc.cSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free') Rename mdesc_mem_ops to *_ops so modpost ignores __init references and declare mdesc_bootmem_alloc __init since it is only used during __init context. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: fix section mismatch warning in pci_sunv4Sam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init') pci_sun4v_pbm_init and sun4v_pci_init was only used under __init context so declare them _init. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Stop using drivers/char/rtc.cDavid S. Miller
The existing sparc64 mini_rtc driver can handle CMOS based rtcs trivially with just a few lines of code and the simplifies things tremendously. Tested on SB1500. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Fix virq decomposition.David S. Miller
The dev_handle and dev_ino fields don't match up exactly to the traditional IMAP_IGN and IMAP_INO masks. So store them away in a table and look them up directly. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Use KERN_ERR in IRQ manipulation error printks.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Do not flood log with failed DS messages.David S. Miller
When booting up a control node it's quite common to not be able to register several service types. And likewise on guests at least one or two are going to not be there. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Handle multiple domain-services-port nodes properly.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC64]: Improve VIO device naming further.David S. Miller
The best scheme to get uniqueness seems to be: FOO -- If node lacks "id" property FOO-$(ID) -- If node has "id" but parent lacks "cfg-handle" FOO-$(ID)-$(CFG_HANDLE) -- If node has both Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC]: Make sure dev_archdata is filled in for all devices.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[SPARC]: Fix serial console device detection.David S. Miller
The current scheme works on static interpretation of text names, which is wrong. The output-device setting, for example, must be resolved via an alias or similar to a full path name to the console device. Paths also contain an optional set of 'options', which starts with a colon at the end of the path. The option area is used to specify which of two serial ports ('a' or 'b') the path refers to when a device node drives multiple ports. 'a' is assumed if the option specification is missing. This was caught by the UltraSPARC-T1 simulator. The 'output-device' property was set to 'ttya' and we didn't pick upon the fact that this is an OBP alias set to '/virtual-devices/console'. Instead we saw it as the first serial console device, instead of the hypervisor console. The infrastructure is now there to take advantage of this to resolve the console correctly even in multi-head situations in fbcon too. Thanks to Greg Onufer for the bug report. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20Merge branch 'for-2.6.23' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 * 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits) [CELL] spufs: rework list management and associated locking [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs [CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks [CELL] spu_base: locking cleanup [CELL] cell: indexing of SPUs based on firmware vicinity properties [CELL] spufs: integration of SPE affinity with the scheduller [CELL] cell: add placement computation for scheduling of affinity contexts [CELL] spufs: extension of spu_create to support affinity definition [CELL] cell: add hardcoded spu vicinity information for QS20 [CELL] cell: add vicinity information on spus [CELL] cell: add per BE structure with info about its SPUs [CELL] spufs: use find_first_bit() instead of sched_find_first_bit() [CELL] spufs: remove unused file argument from spufs_run_spu() [CELL] spufs: change decrementer restore timing [CELL] spufs: dont halt decrementer at restore step 47 [CELL] spufs: limit saving MFC_CNTL bits [CELL] spufs: fix read and write for decr_status file [CELL] spufs: fix decr_status meanings [CELL] spufs: remove needless context save/restore code [CELL] spufs: fix array size of channel index ...
2007-07-20[CELL] spufs: rework list management and associated lockingChristoph Hellwig
This sorts out the various lists and related locks in the spu code. In detail: - the per-node free_spus and active_list are gone. Instead struct spu gained an alloc_state member telling whether the spu is free or not - the per-node spus array is now locked by a per-node mutex, which takes over from the global spu_lock and the per-node active_mutex - the spu_alloc* and spu_free function are gone as the state change is now done inline in the spufs code. This allows some more sharing of code for the affinity vs normal case and more efficient locking - some little refactoring in the affinity code for this locking scheme Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] oprofile: add support to OProfile for profiling CELL BE SPUsBob Nelson
From: Maynard Johnson <mpjohn@us.ibm.com> This patch updates the existing arch/powerpc/oprofile/op_model_cell.c to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code. Exports spu_set_profile_private_kref and spu_get_profile_private_kref which are used by OProfile to store private profile information in spufs data structures. Also incorporated several fixes from other patches (rrn). Check pointer returned from kzalloc. Eliminated unnecessary cast. Better error handling and cleanup in the related area. 64-bit unsigned long parameter was being demoted to 32-bit unsigned int and eventually promoted back to unsigned long. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org>
2007-07-20[CELL] oprofile: enable SPU switch notification to detect currently active ↵Bob Nelson
SPU tasks From: Maynard Johnson <mpjohn@us.ibm.com> This patch adds to the capability of spu_switch_event_register so that the caller is also notified of currently active SPU tasks. Exports spu_switch_event_register and spu_switch_event_unregister so that OProfile can get access to the notifications provided. Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org>
2007-07-20[CELL] spu_base: locking cleanupChristoph Hellwig
Sort out the locking mess in spu_base and document the current rules. As an added benefit spu_alloc* and spu_free don't block anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cell: indexing of SPUs based on firmware vicinity propertiesArnd Bergmann
This patch links spus according to their physical position using information provided by the firmware through a special vicinity device-tree property. This property is present in current version of Malta firmware. Example of vicinity properties for a node in Malta: Node: Vicinity property contains phandles of: spe@0 [ spe@100000 , mic-tm@50a000 ] spe@100000 [ spe@0 , spe@200000 ] spe@200000 [ spe@100000 , spe@300000 ] spe@300000 [ spe@200000 , bif0@512000 ] spe@80000 [ spe@180000 , mic-tm@50a000 ] spe@180000 [ spe@80000 , spe@280000 ] spe@280000 [ spe@180000 , spe@380000 ] spe@380000 [ spe@280000 , bif0@512000 ] Only spe@* have a vicinity property (e.g., bif0@512000 and mic-tm@50a000 do not have it). Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: integration of SPE affinity with the schedullerArnd Bergmann
This patch makes the scheduller honor affinity information for each context being scheduled. If the context has no affinity information, behaviour is unchanged. If there are affinity information, context is schedulled to be run on the exact spu recommended by the affinity placement algorithm. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cell: add placement computation for scheduling of affinity contextsArnd Bergmann
This patch provides the spu affinity placement logic for the spufs scheduler. Each time a gang is going to be scheduled, the placement of a reference context is defined. The placement of all other contexts with affinity from the gang is defined based on this reference context location and on a precomputed displacement offset. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: extension of spu_create to support affinity definitionArnd Bergmann
This patch adds support for additional flags at spu_create, which relate to the establishment of affinity between contexts and contexts to memory. A fourth, optional, parameter is supported. This parameter represent a affinity neighbor of the context being created, and is used when defining SPU-SPU affinity. Affinity is represented as a doubly linked list of spu_contexts. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cell: add hardcoded spu vicinity information for QS20Arnd Bergmann
This patch allows the use of spu affinity on QS20, whose original FW does not provide affinity information. This is done through two hardcoded arrays, and by reading the reg property from each spu. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cell: add vicinity information on spusArnd Bergmann
This patch adds affinity data to each spu instance. A doubly linked list is created, meant to connect the spus in the physical order they are placed in the BE. SPUs near to memory should be marked as having memory affinity. Adjustments of the fields acording to FW properties is done in separate patches, one for CPBW, one for Malta (patch for Malta under testing). Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cell: add per BE structure with info about its SPUsArnd Bergmann
Addition of a spufs-global "cbe_info" array. Each entry contains information about one Cell/B.E. node, namelly: * list of spus (both free and busy spus are in this list); * list of free spus (replacing the static spu_list from spu_base.c) * number of spus; * number of reserved (non scheduleable) spus. SPE affinity implementation actually requires only access to one spu per BE node (since it implements its own pointer to walk through the other spus of the ring) and the number of scheduleable spus (n_spus - non_sched_spus) However having this more general structure can be useful for other functionalities, concentrating per-cbe statistics / data. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: use find_first_bit() instead of sched_find_first_bit()Masato Noguchi
spu_sched->bitmap has MAX_PRIO(=140) width in bits.However, since ff80a77f20f811c0cc5b251d0f657cbc6f788385, sched_find_first_bit() only supports 100-bit bitmaps. Thus, spu_sched->bitmap should be treated by generic find_first_bit(). Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: remove unused file argument from spufs_run_spu()Jeremy Kerr
From: Sebastian Siewior <cbe-oss-dev@ml.breakpoint.cc> The 'file' argument is unused in spufs_run_spu(). This change removes it. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: change decrementer restore timingMasato Noguchi
The SPU decrementer should be restored after the LSCSA DMA has completed. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: dont halt decrementer at restore step 47Masato Noguchi
No need to halt the SPE decrementer at context restore step 47, it will be done in step 7. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: limit saving MFC_CNTL bitsMasato Noguchi
At save step 8, the mfc control register in the CSA should be written _only_ with Sc and Sm bits (at least MFC_CNTL[Dh] should be set to 0) Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: fix read and write for decr_status fileMasato Noguchi
The decr_status in the LSCSA is valid only in the sequence of context restore. Thus, it's nonsense to read and/or write it through spufs. This patch changes decr_status node to access MFC_CNTL[Ds] in the CSA. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: fix decr_status meaningsMasato Noguchi
The decr_status in the LSCSA is confusedly used as two meanings: * SPU decrementer was running * SPU decrementer was wrapped as a result of adjust and the code to set decr_status is missing. This patch fixes these problems by using the decr_status argument as a set of flags. This requires a rebuild of the shipped spu_restore code. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: remove needless context save/restore codeMasato Noguchi
The following steps are not needed in the SPE context save/restore paths: Save Step 12: save_mfc_decr() save suspend_time to CSA (It will be done by step 14) save ch 7 (decrementer value will be saved in LSCSA by spe-side step 10) Restore Step 59: restore_ch_part1() restore ch 1 (it will be done by spe-side step 15) This change removes the unnecessary steps. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: fix array size of channel indexJeremy Kerr
Based on a fix from Masato Noguchi <Masato.Noguchi@jp.sony.com>. Remove the (incorrect) array size declarations in the spufs channel arrays, and use ARRAY_SIZE rather than hardcoded values. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: make sure context are scheduled again after spu_acquire_savedChristoph Hellwig
Currently a process is removed from the physical spu when spu_acquire_saved is saved but never put back. This patch adds a new spu_release_saved that is to be paired with spu_acquire_saved and put the process back if it has been in RUNNABLE state before. Niether Jeremy not be are entirely happy about this exact patch because it adds another spu_activate call outside of the owner thread, but I feel this is the best short-term fix we can come up with. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: add spu stats in sysfs and ctx stat file in spufsAndre Detsch
This patch exports per-context statistics in spufs as long as spu statistics in sysfs. It was formed by merging: "spufs: add spu stats in sysfs" From: Christoph Hellwig "spufs: add stat file to spufs" From: Christoph Hellwig "spufs: fix libassist accounting" From: Jeremy Kerr "spusched: fix spu utilization statistics" From: Luke Browning And some adjustments by myself, after suggestions on cbe-oss-dev. Having separate patches was making the review process harder than it should, as we end up integrating spus and ctx statistics accounting much more than it was on the first implementation. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: Remove spurious WARN_ON for spu_deactivate for NOSCHED contextsJeremy Kerr
In 6cbf93960e64f313f6e247cbca7afaa50e3ee2c we added a WARN_ON for calling spu_deactivate on contexts created with the SPU_CREATE_NOSCHED flag. However, all NOSCHED contexts will need to be deactivated when the context is destroyed, so this gives a spurious warning when any NOSCHED context is closed. This change removes the WARN_ON. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: Make signal-notification files readonly for NOSCHED contextsJeremy Kerr
Reading from the signal{1,2} files requires a spu_acquire_saved, so make these files write-only for contexts created with SPU_CREATE_NOSCHED. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: Avoid unexpectedly restaring MFC during context saveKazunori Asayama
The current SPU context saving procedure in SPUFS unexpectedly restarts MFC when halting decrementer, because MFC_CNTL[Dh] is set without MFC_CNTL[Sm]. This bug causes, for example, saving broken DMA queues. Here is a patch to fix the problem. Signed-off-by: Kazunori Asayama <asayama@sm.sony.co.jp> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] spufs: remove section mismatch warningSebastian Siewior
WARNING: arch/powerpc/platforms/cell/spufs/spufs.o(.init.text+0x158): Section mismatch: reference to .exit.text:.spu_sched_exit (between '.init_module' and '.spu_sched_init') was introduced by c99c1994a2bb9493b4ac372b2b6ee2606d291171 This patch removes the warning. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] add support for MSI on Axon-based Cell systemsMichael Ellerman
This patch adds support for the setup and decoding of MSIs on Axon-based Cell systems, using the MSIC mechanism. This involves setting up an area of BE memory which the Axon then uses as a FIFO for MSI messages. When one or more MSIs are decoded by the MSIC we receive an interrupt on the MPIC, and the MSI messages are written into the FIFO. At the moment we use a 64KB FIFO, one per MSIC/BE. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] saving spus information for kexec crashAndre Detsch
This patch adds support for investigating spus information after a kernel crash event, through kdump vmcore file. Implementation is based on xmon code, but the new functionality was kept independent from xmon. Signed-off-by: Lucio Jose Herculano Correia <luciojhc@br.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] driver for DDR2 memory on AXONMaxim Shchetynin
The Axon bridge chip used on new Cell/B.E. based blade servers comes with a DDR2 memory controller that can be used to attach cheap memory modules, as opposed to the high-speed XDR memory that is used by the CPU itself. Since the memory controller does not participate in the cache coherency protocol, we can not use the memory direcly for Linux applications, but by providing a block device it can be used for swap space, temporary file storage and through the use of the direct_access block device operation for mapping into user addresses, when it is mounted with an appropriate file system. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] allow linux to map Cell regs on legacy SLOF tree.Jean-Christophe DUBOIS
The platforms missing the "cpus" property in the "be" node are mono-Cell platforms such as CAB or Getaway. Therefore it is possible to assume that if there is no "cpus" properties under the "be" node then we can safely return the "device node" without more checking. This is a bit hacky but ... it allows it to work on these platforms. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] fix cbe_thermal for legacy SLOF tree.Jean-Christophe DUBOIS
Previous patch changed based on Christian Krafft's comment. On some legacy SLOF tree the generic code is unable to ioremap some Cell BE registers. Therefore the "generic" functions are returning a NULL pointer, triggering a crash on such platforms. Let's handle this more gracefully. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: Christian Kraff <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] fix cbe_cpufreq for legacy SLOF tree.Jean-Christophe DUBOIS
Previous patch changed based on Christian Krafft's comment. On some legacy SLOF tree the generic code is unable to ioremap some Cell BE registers. Therefore the "generic" functions are returning a NULL pointer, triggering a crash on such platforms. Let's handle this more gracefully. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: Christian Kraff <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cbe_cpufreq: reorganize codeChristian Krafft
This patch reorganizes the code of the driver into three files. Two cbe_cpufreq_pmi.c and cbe_cpufreq_pervasive.c care about hardware. cbe_cpufreq.c contains the logic. There is no changed behaviour, except that the PMI related function is now located in a seperate module cbe_cpufreq_pmi. This module will be required by cbe_cpufreq, if CONFIG_CBE_CPUFREQ_PMI has been set. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cbe_cpufreq: fix minor issuesChristian Krafft
Minor issues have been fixed: * added a missing call to of_node_put() * signedness of a function parameter * added some line breaks * changed global pmi_frequency_limit to a per node pmi_slow_mode_limit array Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cbe_cpufreq: fix initializationChristian Krafft
This patch fixes the initialization of the cbe_cpufreq driver. The code that initializes the PMI related functions was called per cpu: * registering cpufreq notifier block * registering a pmi handler This ends in a bug that the notifier block gets called in an endless loop. The initialization code is being put to the module init code path by this patch. This way it only gets called once. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] cbe_cpufreq: fix latency measurementChristian Krafft
This patch fixes the debug code that calculates the transition time when changing the slow modes on a Cell BE cpu. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20[CELL] pmi: remove support for mutiple devices.Christian Krafft
The pmi driver got simplified by removing support for multiple devices. As there is no more than one pmi device per maschine, there is no need to specify the device for listening and sending messages. This way the caller (cbe_cpufreq) doesn't need to scan the device tree. When registering the handler on a board without a pmi interface, pmi.c will just return -ENODEV. The patch that fixed the breakage of cell_defconfig has been broken out of the earlier version of this patch. So this is the version that applies cleanly on top of it. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Prevent people from directly including <asm/rwsem.h>. [IA64] remove time interpolator [IA64] Convert to generic timekeeping/clocksource [IA64] refresh some config files for 64K pagesize [IA64] Delete iosapic_free_rte() [IA64] fallocate system call [IA64] Enable percpu vector domain for IA64_DIG [IA64] Enable percpu vector domain for IA64_GENERIC [IA64] Support irq migration across domain [IA64] Add support for vector domain [IA64] Add mapping table between irq and vector [IA64] Check if irq is sharable [IA64] Fix invalid irq vector assumption for iosapic [IA64] Use dynamic irq for iosapic interrupts [IA64] Use per iosapic lock for indirect iosapic register access [IA64] Cleanup lock order in iosapic_register_intr [IA64] Remove duplicated members in iosapic_rte_info [IA64] Remove block structure for locking in iosapic.c