aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-03-22Merge branch 'omap-fixes-for-tony' of ↵Tony Lindgren
git://dev.omapzoom.org/pub/scm/saaguirre/linux-omap-camera into omap-fixes-for-linus
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
2010-03-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
2010-03-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
2010-03-19powerpc: Remove IOMMU_VMERGE config optionFUJITA Tomonori
The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Fix swiotlb to respect the boot optionFUJITA Tomonori
powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Becky Bruce <beckyb@kernel.crashing.org> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Do not call prink when CONFIG_PRINTK is not definedMárton Németh
When printk() is disabled (CONFIG_PRINTK) at menu item General setup -> Configure standard kernel features (for small systems) -> Enable support for printk then there should be no printk() calls at all. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Use correct ccr bit for syscall error statusNathan Lynch
The powerpc implementations of syscall_get_error and syscall_set_return_value should use CCR0:S0 (0x10000000) for testing and setting syscall error status. Fortunately these APIs don't seem to be used at the moment. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt
2010-03-18alpha: fix compile errors in dma-mapping-common.hFUJITA Tomonori
The commit c186caca3dbe7f44da624cb4f9d78e1b1dfb13b8 leads to the following errors with CONFIG_ALPHA_{TSUNAMI, TITAN, RAWHIDE, MARVEL}: /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h: In function `dma_map_sg_attrs': /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:49: error: implicit declaration of function `for_each_sg' /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:50: error: syntax error before "kmemcheck_mark_initialized" Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reported-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18alpha: remove trailing spaces in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18alpha: use __ratelimitAkinobu Mita
Replace open-coded rate limiting logic with __ratelimit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits) Blackfin: stop cleaning include/asm/asm-offsets.h Blackfin: scale calibration when cpu freq changes Blackfin: eat spurious space in asm/dpmc.h Blackfin: fix anomaly 283 handling with exact hardware error Blackfin: bf537-stamp: add example ADXL346 orientation resources Blackfin: bf537-stamp: add example AD2S1210 IIO resources Blackfin: don't support keypad wakeup from hibernate Blackfin: bf537-stamp: add example AD7416 IIO resources Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Blackfin: bf537-stamp: add example AD7414 temp sensor resources Blackfin: rename AD1836 to AD183X in board files Blackfin: bf537-stamp: add example AD2S120x resources Blackfin: add support for the on-chip MAC status interrupts Blackfin: asm/page.h: pull in asm-generic headers Blackfin: mark gpio lib functions static Blackfin: bf537-stamp: add example ADAU1361 resources Blackfin: GPIO: implement to_irq handler Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Blackfin: bf537-stamp: add example AD2S90 resources Blackfin: bf537-stamp: add example AD5398 power regulator resources ...
2010-03-18Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
2010-03-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM/OMAP: Remove the +x bit from a couple of source files omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values OMAP4: fix temporary hacks that break multi-omap PM OMAP2: cpu_is_omap2*: fix compile-time removal of unused code omap3: pandora: add missing i2c3 board_info omap: mach-omap2/io.c: fix function declarations omap: Fix gpio_resume_after_retention omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board omap: Checkpatch cleanup for blizzard.h omap: pass the reboot command to the boot loader omap2/3/4: mailbox: remove compiler warning OMAP2: serial.c: Fix number of uarts in early_init omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors omap2: Update n8x0 defconfig to test multi-omap and DMA api changes omap2: add USB initialization for tusb6010 omap4: Fix build break by moving omap_smc1 into a separate .S omap2/3/4: ehci: avoid compiler error with touchbook omap3: Fix compile for Touch Book early_param
2010-03-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) ARM: Fix RiscPC decompressor build errors ARM: Fix sorting of platform group config options and includes ARM: 5991/1: Fix regression in restore_user_regs macro ARM: 5989/1: ARM: KGDB: add support for SMP platforms ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush ARM: Add final piece to fix XIP decompressor in read-only memory video: enable sh_mobile_lcdc on SH-Mobile ARM ARM: mach-shmobile: ap4evb SDHI0 platform data V2 ARM: mach-shmobile: sh7372 SDHI vector merge ARM: mach-shmobile: sh7377 SDHI vector merge ARM: mach-shmobile: sh7367 SDHI vector merge ARM: mach-shmobile: G4EVM KEYSC platform data mtd: enable sh_flctl on SH-Mobile ARM ARM: mach-shmobile: G3EVM FLCTL platform data ARM: mach-shmobile: G3EVM KEYSC platform data Video: ARM CLCD: Better fix for swapped IENB and CNTL registers ARM: Add L2 cache handling to smp boot support ARM: 5960/1: ARM: perf-events: fix v7 event selection mask ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds ...
2010-03-18Merge branch 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux: ARM: SAMSUNG: Fixup commit 4e6d488af37980d224cbf298224db6173673f362 ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h> ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.
2010-03-18Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits) microblaze: entry.S use delay slot for return handlers microblaze: Save current task directly microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap microblaze: PCI early support for noMMU system microblaze: Fix dma alloc and free coherent dma functions microblaze: Add consistent code microblaze: pgtable.h: move consistent functions microblaze: Remove ancient Kconfig option for consistent mapping microblaze: Remove VMALLOC_VMADDR microblaze: Add define for ASM_LOOP microblaze: Preliminary support for dma drivers microblaze: remove trailing space in messages microblaze: Use generic show_mem() microblaze: Change temp register for cmdline microblaze: Preliminary support for dma drivers microblaze: Move cache function to cache.c microblaze: Add support from PREEMPT microblaze: Add support for Xilinx PCI host bridge microblaze: Enable PCI, missing files microblaze: Add core PCI files ...
2010-03-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits) perf: Fix unexported generic perf_arch_fetch_caller_regs perf record: Don't try to find buildids in a zero sized file perf: export perf_trace_regs and perf_arch_fetch_caller_regs perf, x86: Fix hw_perf_enable() event assignment perf, ppc: Fix compile error due to new cpu notifiers perf: Make the install relative to DESTDIR if specified kprobes: Calculate the index correctly when freeing the out-of-line execution slot perf tools: Fix sparse CPU numbering related bugs perf_event: Fix oops triggered by cpu offline/online perf: Drop the obsolete profile naming for trace events perf: Take a hot regs snapshot for trace events perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot perf/x86-64: Use frame pointer to walk on irq and process stacks lockdep: Move lock events under lockdep recursion protection perf report: Print the map table just after samples for which no map was found perf report: Add multiple event support perf session: Change perf_session post processing functions to take histogram tree perf session: Add storage for seperating event types in report perf session: Change add_hist_entry to take the tree root instead of session perf record: Add ID and to recorded event data when recording multiple events ...
2010-03-18powerpc/5200: Build fix for mpc52xx watchdog timer codeGrant Likely
mpc52xx_gpt_wdt_setup is defined as 0, which causes the following build failure with gcc 4.5, since it's built with -Werror. arch/powerpc/platforms/52xx/mpc52xx_gpt.c:761:3: error: statement with no effect Changing it to a static inline fixes the problem. Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-17perf: Fix unexported generic perf_arch_fetch_caller_regsFrederic Weisbecker
perf_arch_fetch_caller_regs() is exported for the overriden x86 version, but not for the generic weak version. As a general rule, weak functions should not have their symbol exported in the same file they are defined. So let's export it on trace_event_perf.c as it is used by trace events only. This fixes: ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined! ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined! -v2: And also only build it if trace events are enabled. -v3: Fix changelog mistake Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16powerpc/fsl-booke: Get coherent bit from PTEKumar Gala
We shouldn't be always setting 'M' in the TLB entry since its reasonable for somethings to be mapped non-coherent. The PTE should have 'M' set properly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-16powerpc/85xx: Make sure lwarx hint isn't set on ppc32Kumar Gala
e500v1/v2 based chips will treat any reserved field being set in an opcode as illegal. Thus always setting the hint in the opcode is a bad idea. Anton should be kept away from the powerpc opcode map. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-15ARM: SAMSUNG: Fixup commit 4e6d488af37980d224cbf298224db6173673f362Ben Dooks
Commit 4e6d488af37980d224cbf298224db6173673f362 either missed out the following machine files or somehow managed to clash between merges. Fixup the three files missing the second parameter to addruart macro to allow them to build. Fixes the following warnings in arch/arm/kernel/debug.c: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:167: Error: too many positional arguments arch/arm/kernel/debug.S:183: Error: too many positional arguments Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h>Ben Dooks
The decleration of error() as static in the platform specific uncompress code in arch/arm/plat-samsung/include/plat/uncomopress.h causes the build of the uncompressor to break. Remove it, as it is no longer needed. arch/arm/boot/compressed/decompress.o: In function `gunzip': /var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:67: undefined reference to `error' /var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:73: undefined reference to `error' /var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:80: undefined reference to `error' /var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:95: undefined reference to `error' /var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:152: undefined reference to `error' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15ARM: SAMSUNG: Add suspend/resume support for S3C PWM driverVasily Khoruzhick
Reset period_ns and duty_ns values in suspend handler to avoid skip of configuration if same values passed to pwm_config; Restore invertion bit in resume handler. Without this patch PWM works incorrectly after resume from suspend. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.Vasily Khoruzhick
Fix compilation issue by moving s3c2440-cpufreq.c into mach-s3c2440 directory Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15ARM: Fix RiscPC decompressor build errorsRussell King
arch/arm/boot/compressed/decompress.o: In function `do_decompress': decompress.c:(.text+0x26e8): undefined reference to `error' decompress.c:(.text+0x2760): undefined reference to `error' decompress.c:(.text+0x27d8): undefined reference to `error' decompress.c:(.text+0x2824): undefined reference to `error' decompress.c:(.text+0x28f0): undefined reference to `error' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15omap3: zoom2/3: Register only 1 8250 portSergio Aguirre
There's no more serial ports available, so, doesn't make sense to create 4 device nodes. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15omap3: zoom 2/3: Change debugboard serial port idSergio Aguirre
This is now changed to PLAT8250_DEV_PLATFORM (= 0), because it's the only port that's going to be initialized in Zoom 2/3 boards. So, it doesn't make sense to keep the hardcoded 3 value anymore. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15omap3: 3630sdp: Explicitly enable all UARTsSergio Aguirre
All UARTs seem physically reachable, so, enable them all. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15omap3: zoom2/3 / 3630sdp: Don't init always all uartsSergio Aguirre
This is useless, since in Zoom2/3 boards, the ports aren't even physically accessible. They must be explicitly initted in the board-zoom2.c, board-zoom3.c and board-3630sdp.c files instead. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15omap2/3/4: serial: Remove condition for getting uart4_physSergio Aguirre
This check is invalid, since we haven't filled the omap_revision var at this point. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15OMAP3: serial: Use dev_* macros instead of printkSergio Aguirre
As we have a struct device populated at the time we are printing the errors, using dev_* macros makes more sense, as could give a better idea where the error/warning came from. Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15OMAP3: serial: Check for zero-based physical addrSergio Aguirre
This is for protecting a wrong mapping attempt of a zero-based physical address. The result is that, no serial port will be attempted to be mapped. Also add an additional protection for NULL clocks before attempting to enable them (if above condition applies) Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15ARM: Fix sorting of platform group config options and includesRussell King
... and document the sorting criteria to help future additions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15ARM: 5991/1: Fix regression in restore_user_regs macroAnders Grafström
ARMv5T and earlier require that a ldm {}^ instruction is not followed by an instruction that accesses banked registers. This patch restores the nop that was lost in commit b86040a59feb255a8193173caa4d5199464433d5. Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15ARM: 5989/1: ARM: KGDB: add support for SMP platformsWill Deacon
To support SMP platforms, KGDB requires the architecture backend to implement the kgdb_roundup_cpus function. This patch, taken against 2.6.33, implements the function for ARM based on the MIPS port. Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jean-Michel Hautbois <jhautbois@gmail.com> Cc: KGDB Mailing List <kgdb-bugreport@lists.sourceforge.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of ↵Sascha Hauer
__armv4_mmu_cache_flush This got broken with commit 0e056f20 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15ARM: Add final piece to fix XIP decompressor in read-only memoryRussell King
This defines STATIC_RW_DATA, which prevents the read/write malloc management data being declared with a static attribute. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King
2010-03-14Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI: processor: push file static MADT pointer into internal map_madt_entry() ACPI: processor: refactor internal map_lsapic_id() ACPI: processor: refactor internal map_x2apic_id() ACPI: processor: refactor internal map_lapic_id() ACPI: processor: driver doesn't need to evaluate _PDC ACPI: processor: remove early _PDC optin quirks ACPI: processor: add internal processor_physically_present() ACPI: processor: move acpi_get_cpuid into processor_core.c ACPI: processor: export acpi_get_cpuid() ACPI: processor: mv processor_pdc.c processor_core.c ACPI: processor: mv processor_core.c processor_driver.c ACPI: plan to delete "acpi=ht" boot option ACPI: remove "acpi=ht" DMI blacklist PNPACPI: add bus number support PNPACPI: add window support resource: add window support resource: add bus number support resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type acpiphp: Execute ACPI _REG method for hotadded devices ACPI video: Be more liberal in validating _BQC behaviour ...
2010-03-14init dynamic bin_attribute structuresWolfram Sang
Commit 6992f5334995af474c2b58d010d08bc597f0f2fe ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-15ARM: mach-shmobile: ap4evb SDHI0 platform data V2Magnus Damm
Add SDHI0 platform data for the AP4EVB board V2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7372 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7372 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7377 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7377 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7367 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7367 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G4EVM KEYSC platform dataNISHIMOTO Hiroki
This patch adds KEYSC platform data for the G4EVM board. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G3EVM FLCTL platform dataMagnus Damm
This patch adds FLCTL platform data for the G3EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G3EVM KEYSC platform dataMagnus Damm
This patch adds KEYSC platform data for the G3EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 20:33:32 +0000