aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-12-15Blackfin: convert DMA mutex to an atomic and drop redundant codeMike Frysinger
The DMA channel status field was encoding redundant info wrt the DMA MMR config register, and it was doing an incomplete job of checking all DMA channels (some drivers write directly to the config register). So drop the tristate field in favor of a binary atomic field. This simplifies the code in general, removes the implicit need for sleeping, and forces the suspend code to handle all channels properly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: update bfin_rotary definesMichael Hennerich
The driver was moved during the merge process, so update the defines to match the new location. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: push down asm/ includes and out of bfin-global.hMike Frysinger
Avoid including unnecessary headers all the time as well as circular includes with core requirements. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: pull in firmware KconfigMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()Mike Frysinger
All the arches define a helper macro to make things easy for driver code. Reported-by: Frank Van Hooft <frank@frankvh.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: bf537-stamp: need io.h for writeb() funcsBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: bf538: add support for extended GPIO banksMichael Hennerich
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as the other ports on the part and the same way as all other Blackfin parts. The MMRs are programmed slightly different and they cannot be used to generate interrupts or wakeup a sleeping system. Since these guys don't fit into the existing code, create a simple gpiolib driver for them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: add C define of trace_buffer_init()Graf Yang
Have the C API trace funcs match the assembly API trace funcs. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: cpufreq: use a constant latencyMichael Hennerich
PLL_LOCKCNT applies only to the PLL programming sequence which does not apply to core and system clock dividers. Writes to PLL_DIV to change the CSEL/SSEL dividers take effect immediately. There is still overhead in software in writing the new dividers, so just use a value of 50us as this should be good enough. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: clean up isp1362 board resourcesMike Frysinger
Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into mainline and it was a bad interface into the board resources. For boards that actually used this, replace it with an actual IRQ define. For boards that didn't, simply drop the resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: calculate on-chip lengths at link time rather than run timeMike Frysinger
Since the link sizes never change at runtime, push the calculation out to the linker script to save some useless calculation costs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: improve async bank access checking (for cross-banks & XIP)Bernd Schmidt
The access_ok() function did not accept ranges within the async banks which made it impossible to do XIP in flash. Fixing that also showed that the current bfin_mem_access_type() code did not work with accesses that spanned async banks (like a file system). So split out and fix the async bank checks so that all these scenarios work as expected. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: convert DMA code to a proper bitmapMichael Hennerich
Rather than using our own data structures that basically boil down to a bitmap, use the standard bitmap functions. Reported-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: clean up bf537-lq035 board resourcesMichael Hennerich
Now that the driver has been updated, convert the board resources to the new i2c framework for managing slaves. For boards that don't actually hook up to this hardware, simply drop the resources altogether. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: add some bounds checking to peripheral_requestBarry Song
The requested peripheral is turned into an index into some state arrays, so make sure the calculated index doesn't exceed the index. This occurs when using bogus pin values or the define headers are screwed up. Now we'll notice right away that something needs fixing instead of trying to track down random memory corruption. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: use common code for cycle->nanosecond conversionYi Li
No point in redefining things that common code already does for us. Also use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify sched_clock() handling between clock sourcesYi Li
Currently sched_clock() is only defined when using CYCLES as a clock source. Declare sched_clock() in common code and mark it with notrace to prevent invoking sched_clock() recursively (because ftrace uses sched_clock() to record time). Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: fix gptimer0 clock source compile warningYi Li
Some of the clocksource prototypes were updated, but the gptimer0 func was missed in the process. Not a big issue as the argument is ignored, but we should fix the compile warning anyways. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: update defconfigsMike Frysinger
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: convert to generic checksum codeMike Frysinger
The Blackfin port only implemented an optimized version of the csum_tcpudp_nofold function, so convert everything else to the new generic code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Clean up thermal init by introducing intel_thermal_supported() x86, mce: Thermal monitoring depends on APIC being enabled x86: Gart: fix breakage due to IOMMU initialization cleanup x86: Move swiotlb initialization before dma32_free_bootmem x86: Fix build warning in arch/x86/mm/mmio-mod.c x86: Remove usedac in feature-removal-schedule.txt x86: Fix duplicated UV BAU interrupt vector nvram: Fix write beyond end condition; prove to gcc copy is safe mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe x86: Limit the number of processor bootup messages x86: Remove enabling x2apic message for every CPU doc: Add documentation for bootloader_{type,version} x86, msr: Add support for non-contiguous cpumasks x86: Use find_e820() instead of hard coded trampoline address x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
2009-12-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
2009-12-14Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits) microblaze: Remove rt_sigsuspend wrapper microblaze: nommu: Don't clobber R11 on syscalls microblaze: Remove show_tmem function microblaze: Support for WB cache microblaze: Add PVR for Microblaze v7.30.a microblaze: Remove ancient and fake microblaze version from cpu_ver table microblaze: Remove panic_timeout init value microblaze: Do not count system calls in default microblaze: Enable DTC compilation microblaze: Core oprofile configs and hooks microblaze: Fix level interrupt ACKing microblaze: Enable futimesat syscall microblaze: Checking DTS against PVR for write-back cache microblaze: Remove duplicity from pgalloc.h microblaze: Futex support microblaze: Adding dev_arch_data functions microblaze: Fix the heartbeat gpio to be more robust microblaze: Simple __copy_tofrom_user for noMMU microblaze: Export memory_start for modules microblaze: Use lowest-common-denominator default CPU settings ...
2009-12-14Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits) mfd: Add twl6030 regulator subdevices regulator: Add support for twl6030 regulators rtc: Add twl6030 RTC support mfd: Add support for twl6030 irq framework mfd: Rename twl4030_ routines in twl-regulator.c mfd: Rename twl4030_ routines in rtc-twl.c mfd: Rename all twl4030_i2c* mfd: Rename twl4030* driver files to enable re-use mfd: Clarify twl4030 return value for read and write mfd: Add all twl4030 regulators to the twl4030 mfd driver mfd: Don't set mc13783 ADREFMODE for touch conversions mfd: Remove ezx-pcap defines for custom led gpio encoding mfd: Near complete mc13783 rewrite mfd: Remove build time warning for WM835x register default tables mfd: Force I2C to be built in when building WM831x mfd: Don't allow wm831x to be built as a module mfd: Fix incorrect error check for wm8350-core mfd: Fix twl4030 warning gpiolib: Implement gpio_to_irq() for wm831x mfd: Remove default selection of AB4500 ...
2009-12-14Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: fix lh7a40x build ARM: fix sa1100 build ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq [ARM] pxa/zeus: default configuration for Arcom Zeus SBC. [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus [ARM] pxa/zeus: basic support for Arcom Zeus SBC [ARM] pxa/em-x270: fix usb hub power up/reset sequence PCMCIA: fix pxa2xx_lubbock modular build error ARM: RealView: Fix typo in the RealView/PBX Kconfig entry ARM: Do not allow the probing of the local timer ARM: Add an earlyprintk debug console
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-12-14x86, mce: Clean up thermal init by introducing intel_thermal_supported()Hidetoshi Seto
It looks better to have a common function. No change in functionality. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <4B25FDDC.407@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Cyrill Gorcunov <gorcunov@openvz.org>
2009-12-14x86, mce: Thermal monitoring depends on APIC being enabledCyrill Gorcunov
Add check if APIC is not disabled since thermal monitoring depends on it. As only apic gets disabled we should not try to install "thermal monitor" vector, print out that thermal monitoring is enabled and etc... Note that "Intel Correct Machine Check Interrupts" already has such a check. Also I decided to not add cpu_has_apic check into mcheck_intel_therm_init since even if it'll call apic_read on disabled apic -- it's safe here and allow us to save a few code bytes. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Gart: fix breakage due to IOMMU initialization cleanupYinghai Lu
This fixes the following breakage of the commit 75f1cdf1dda92cae037ec848ae63690d91913eac: - GART systems that don't AGP with broken BIOS and more than 4GB memory are forced to use swiotlb. They can allocate aperture by hand and use GART. - GART systems without GAP must disable GART on shutdown. - swiotlb usage is forced by the boot option, gart_iommu_hole_init() is not called, so we disable GART early_gart_iommu_check(). Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Move swiotlb initialization before dma32_free_bootmemFUJITA Tomonori
The commit 75f1cdf1dda92cae037ec848ae63690d91913eac introduced a bug that we initialize SWIOTLB right after dma32_free_bootmem so we wrongly steal memory area allocated for GART with broken BIOS earlier. This moves swiotlb initialization before dma32_free_bootmem(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: yinghai@kernel.org LKML-Reference: <1260759135-6450-2-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Fix build warning in arch/x86/mm/mmio-mod.cJoe Perches
Stephen Rothwell reported these warnings: arch/x86/mm/mmio-mod.c: In function 'print_pte': arch/x86/mm/mmio-mod.c:100: warning: too many arguments for format arch/x86/mm/mmio-mod.c:106: warning: too many arguments for format The 'fmt' was left out accidentally. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus <torvalds@linux-foundation.org> LKML-Reference: <1260775443.18538.16.camel@Joe-Laptop.home> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14microblaze: Remove rt_sigsuspend wrapperMichal Simek
Generic rt_sigsuspend syscalls doesn't need any asm wrapper. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: nommu: Don't clobber R11 on syscallssteve@digidescorp.com
The noMMU syscall trap has a bug that causes R11 to be zero on return to userland. Remove the extra "save" of R11 responsible for the bug. Remove reloading of mode indicator because r11 already contains it. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Remove show_tmem functionMichal Simek
show_tmem function do nothing that's why I removed it. There is also cleaning of commented ancient code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Support for WB cacheMichal Simek
Microblaze version 7.20.d is the first MB version which can be run on MMU linux. Please do not used previous version because they contain HW bug. Based on WB support was necessary to redesign whole cache design. Microblaze versions from 7.20.a don't need to disable IRQ and cache before working with them that's why there are special structures for it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Add PVR for Microblaze v7.30.aMichal Simek
Microblaze v7.30.a will have 0x10 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Remove ancient and fake microblaze version from cpu_ver tableMichal Simek
We need to continue with next microblaze PVR version that's why I have to remove that ancient version. These version strings not match any versions. From Microblaze v5.00.a is possible to use this style. I believe that none use ancients versions. If yes they will be just labeled as unknown version. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Remove panic_timeout init valueMichal Simek
panic_timeout is in BSS section and it is cleared with BSS section. This means that value is setup to 0. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Do not count system calls in defaultMichal Simek
There is not necessary to count system calls that's why I added DEBUG macro Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Enable DTC compilationMichal Simek
For simpleImage format we need to compile DTC. There is still possibility to compile only Linux kernel without DTB compiled-in. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Core oprofile configs and hooksJohn Williams
Microblaze uses timer interrupt mode. Microblaze don't have any performance counter that's why we use just simple implementation. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Fix level interrupt ACKingsteve@digidescorp.com
Level interrupts need to be ack'd in the unmask handler, as in powerpc. Among other issues, this bug causes the system clock to appear to run at double-speed. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Enable futimesat syscallMichal Simek
Futimesat was disabled. LTP testing shows that MB has no problem with this syscall. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Checking DTS against PVR for write-back cacheMichal Simek
WB cache has special flag in PVR. There is added checking mechanism for PVR and DTS. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Remove duplicity from pgalloc.hMichal Simek
just file cleanup Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Futex supportMichal Simek
Microblaze v7.20 provides new lwx, swx instructions which bring possibility to implement lock rutines. There are some tests in open posix thread LTP part but current toolchain not support it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Adding dev_arch_data functionsMichal Simek
The functions, dev_arch_data_set_node and get_node are missing and are needed by some device drivers such as I2C. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Fix the heartbeat gpio to be more robustJohn Linn
The device tree handling for the gpio in the heart beat was not handling the system when there was no gpio and it wasn't working with a newer version of the gpio core which does not have the is-bidir property. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Simple __copy_tofrom_user for noMMUJohn Williams
This is first patch which clear part of uaccess.h. uaccess.h will be clear later. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Export memory_start for modulesMichal Simek
memory_start symbol is needed by kernel modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 02:01:09 +0000