aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-07-19m68knommu: remove is_in_rom() functionGreg Ungerer
Remove is_in_rom() function. It doesn't actually serve the purpose it was intended to. If you look at the use of it _access_ok() (which is the only use of it) then it is obvious that most of memory is marked as access_ok. No point having is_in_rom() then, so remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19m68knommu: start dump from exception stackGreg Ungerer
In die_if_kernel() start the stack dump at the exception-time SP, not at the SP with all the saved registers; the stack below exception-time sp contains only exception-saved values and is already printed in details just before. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19m68knommu: generic irq handlingGreg Ungerer
Change the m68knommu irq handling to use the generic irq framework. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19FRV: work around a possible compiler bugDavid Howells
Work around a possible bug in the FRV compiler. What appears to be happening is that gcc resolves the __builtin_constant_p() in kmalloc() to true, but then fails to reduce the therefore constant conditions in the if-statements it guards to constant results. When compiling with -O2 or -Os, one single spurious error crops up in cpuup_callback() in mm/slab.c. This can be avoided by making the memsize variable const. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19s390: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the s390 linker script to use the asm-generic NOTES macro so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19powerpc: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the powerpc linker script to use the asm-generic NOTES macro so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19alpha: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the alpha linker script to use the asm-generic NOTES macro so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19x86_64: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the x86_64 linker script to use the asm-generic NOTES macro so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19i386: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the i386 linker script and the asm-generic macro it uses so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: variable length argument supportOllie Wild
Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from the old mm into the new mm. We create the new mm before the binfmt code runs, and place the new stack at the very top of the address space. Once the binfmt code runs and figures out where the stack should be, we move it downwards. It is a bit peculiar in that we have one task with two mm's, one of which is inactive. [a.p.zijlstra@chello.nl: limit stack size] Signed-off-by: Ollie Wild <aaw@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-arch@vger.kernel.org> Cc: Hugh Dickins <hugh@veritas.com> [bunk@stusta.de: unexport bprm_mm_init] Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19use the new percpu interface for shared dataFenghua Yu
Currently most of the per cpu data, which is accessed by different cpus, has a ____cacheline_aligned_in_smp attribute. Move all this data to the new per cpu shared data section: .data.percpu.shared_aligned. This will seperate the percpu data which is referenced frequently by other cpus from the local only percpu data. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19define new percpu interface for shared dataFenghua Yu
per cpu data section contains two types of data. One set which is exclusively accessed by the local cpu and the other set which is per cpu, but also shared by remote cpus. In the current kernel, these two sets are not clearely separated out. This can potentially cause the same data cacheline shared between the two sets of data, which will result in unnecessary bouncing of the cacheline between cpus. One way to fix the problem is to cacheline align the remotely accessed per cpu data, both at the beginning and at the end. Because of the padding at both ends, this will likely cause some memory wastage and also the interface to achieve this is not clean. This patch: Moves the remotely accessed per cpu data (which is currently marked as ____cacheline_aligned_in_smp) into a different section, where all the data elements are cacheline aligned. And as such, this differentiates the local only data and remotely accessed data cleanly. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: <linux-arch@vger.kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19jprobes: make jprobes a little safer for usersMichael Ellerman
I realise jprobes are a razor-blades-included type of interface, but that doesn't mean we can't try and make them safer to use. This guy I know once wrote code like this: struct jprobe jp = { .kp.symbol_name = "foo", .entry = "jprobe_foo" }; And then his kernel exploded. Oops. This patch adds an arch hook, arch_deref_entry_point() (I don't like it either) which takes the void * in a struct jprobe, and gives back the text address that it represents. We can then use that in register_jprobe() to check that the entry point we're passed is actually in the kernel text, rather than just some random value. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19unregister_chrdev(): ignore the return valueAkinobu Mita
unregister_chrdev() always returns 0. There is no need to check the return value. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19PM: Integrate beeping flag with existing acpi_sleep flagsPavel Machek
Move "debug during resume from s2ram" into the variable we already use for real-mode flags to simplify code. It also closes nasty trap for the user in acpi_sleep_setup; order of parameters actually mattered there, acpi_sleep=s3_bios,s3_mode doing something different from acpi_sleep=s3_mode,s3_bios. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19PM: Optional beeping during resume from suspend to RAMNigel Cunningham
Add a feature allowing the user to make the system beep during a resume from suspend to RAM, on x86_64 and i386. This is useful for the users with broken resume from RAM, so that they can verify if the control reaches the kernel after a wake-up event. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: fault feedback #2Nick Piggin
This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18Fix RGMII-ID handling in gianfarAndy Fleming
The TSEC/eTSEC can detect the interface to the PHY automatically, but it isn't able to detect whether the RGMII connection needs internal delay. So we need to detect that change in the device tree, propagate it to the platform data, and then check it if we're in RGMII. This fixes a bug on the 8641D HPCN board where the Vitesse PHY doesn't use the delay for RGMII. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-18Add phy-connection-type to gianfar nodesAndy Fleming
The TSEC/eTSEC automatically detect their PHY interface type, unless the type is RGMII-ID (RGMII with internal delay). In that situation, it just detects RGMII. In order to fix this, we need to pass in rgmii-id if that is the connection type. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Initialize phy_mask for both macb devices [AVR32] Fix atomic_add_unless() and atomic_sub_unless() [AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable. [AVR32] Fix build error in parse_tag_rdimg() [AVR32] Don't wire up macb0 unless SW6 is in default position [AVR32] Wire up SSC platform device 0 as TX on ATSTK1000 board [AVR32] Add Atmel SSC driver platform device to AT32AP architecture [AVR32] Remove optimization of unaligned word loads [AVR32] Make STK1000 mux settings configurable [AVR32] CPU frequency scaling for AT32AP [AVR32] Split SM device into PM, RTC, WDT and EIC [AVR32] faster avr32 unaligned access
2007-07-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [PATCH] x86: do not recompile boot for each build [x86 setup] Save/restore DS around invocations of INT 10h [x86 setup] VGA: Clear the Protect bit before setting the vertical height [x86 setup] Fix assembly constraints [x86 setup] build/tools.c: fix comment [x86 setup] MAINTAINERS: document x86 setup code git tree
2007-07-18i386: fixup TRACE_IRQ breakagePeter Zijlstra
The TRACE_IRQS_ON function in iret_exc: calls a C function without ensuring that the segments are set properly. Move the trace function and the enabling of interrupt into the C stub. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18Handle bogus %cs selector in single-step instruction decodingRoland McGrath
The code for LDT segment selectors was not robust in the face of a bogus selector set in %cs via ptrace before the single-step was done. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18[AVR32] Initialize phy_mask for both macb devicesHaavard Skinnemoen
The STK1000 uses pullups on the MDIO lines to the PHY, but they are too weak. This causes the PHY layer to detect PHYs on all possible MII addresses. Mask out all but the correct address to prevent this from happening. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Fix build error in parse_tag_rdimg()Haavard Skinnemoen
This code is inside an #ifdef with a misspelled config symbol, so it hasn't been used for a long time. Fix it before fixing the config symbol to keep bisection working. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Don't wire up macb0 unless SW6 is in default positionKristoffer Nyborg Gregertsen
If the user wants to sacrifice macb0 for more GPIOs, let him. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Wire up SSC platform device 0 as TX on ATSTK1000 boardHans-Christian Egtvedt
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Add Atmel SSC driver platform device to AT32AP architectureHans-Christian Egtvedt
This patch adds register definitions, clocks and IRQs to the platform devices. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Make STK1000 mux settings configurableDavid Brownell
This adds some STK1002-specific config options covering the jumper settings, so the kernel can automatically be configured to include the relevant devices. One of them replaces the previous internal SW2_DEFAULT setting; SPI config is affected by two of the jumpers; and a fourth one switches between LCD and the second Ethernet connector. (There's more that to be done.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] CPU frequency scaling for AT32APHans-Christian Egtvedt
This patch enables CPU frequency scaling for AT32AP devices. This will enable the CPU to scale between the speed of the high speed bus and the master clock and thus save some power. The patch also adds a parent to cpu_clk and a cpu_clk_set_rate to enable changing the CPU clock divider in a sane way. The driver does not check if the given rate is 0, thus resulting in a div by 0. I think this check should be go into the clk_set_rate framework, and not here. Tested on AT32AP7000/ATSTK1000. Hardware documentation can be found in the AT32AP7000 datasheet. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Split SM device into PM, RTC, WDT and EICHaavard Skinnemoen
Split the SM platform device into separate platform devices for PM, RTC, WDT and EIC. This is more correct according to the documentation and allows us to simplify the code a little. Also turn the EIC driver into a real platform driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
2007-07-18[PATCH] x86: do not recompile boot for each buildSam Ravnborg
Keep the arch/i386/boot directory from being rebuilt every time. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-07-18[x86 setup] Save/restore DS around invocations of INT 10hH. Peter Anvin
There exists at least one card, Trident TVGA8900CL (BIOS dated 1992/9/8) which clobbers DS when "scrolling in an SVGA text mode of more than 800x600 pixels." Although we are extremely unlikely to run into that situation, it is cheap insurance to save and restore DS, and it only adds a grand total of 50 bytes to the total output. Pointed out by Etienne Lorrain. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-07-18[x86 setup] VGA: Clear the Protect bit before setting the vertical heightH. Peter Anvin
If the user has asked for the vertical height registers to be recomputed by setting bit 15 in the video mode number, we do so without clearing the Protect bit in the Vertical Retrace Register before setting the Overflow register. As a result, if the VGA BIOS had set the Protect bit, the write to the Overflow register will be dropped, and bits [9:8] of the vertical height will be left unchanged. This is a bug imported from the assembly version of this code. It was pointed out by Etienne Lorrain. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-07-18[x86 setup] Fix assembly constraintsH. Peter Anvin
Fix incorrect assembly constraints. In particular, fix memory constraints used inside push..pop, which can cause invalid operation since gcc may generate %esp-relative references. Additionally: outl() should have "dN" not "dn". query_mca() shouldn't listen 16/32-bit registers in an 8-bit only context. has_eflag(): the "mask" is only used well after both the stack pointer and the output registers have been touched; this requires the output registers to be earlyclobbers (=&) and the input to exclude memory (so "ri", not "g"). Thanks to Etienne Lorrain and Chuck Ebbert for prompting this review. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-07-18[x86 setup] build/tools.c: fix commentH. Peter Anvin
Correct a comment in arch/i386/boot/build/tools.c; we now build the kernel from only two components instead of three, since the boot sector has been integrated in the setup code. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-07-18Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: extent macros cleanup Fix compilation with EXT_DEBUG, also fix leXX_to_cpu conversions. ext4: remove extra IS_RDONLY() check ext4: Use is_power_of_2() Use zero_user_page() in ext4 where possible ext4: Remove 65000 subdirectory limit ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields ext4: Add nanosecond timestamps jbd2: Move jbd2-debug file to debugfs jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG ext4: Set the journal JBD2_FEATURE_INCOMPAT_64BIT on large devices ext4: Make extents code sanely handle on-disk corruption ext4: copy i_flags to inode flags on write ext4: Enable extents by default Change on-disk format to support 2^15 uninitialized extents write support for preallocated blocks fallocate support in ext4 sys_fallocate() implementation on i386, x86_64 and powerpc
2007-07-18Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Set vio->desc_buf to NULL after freeing. [SPARC]: Mark sparc and sparc64 as not having virt_to_bus [SPARC64]: Fix reset handling in VNET driver. [SPARC64]: Handle reset events in vio_link_state_change(). [SPARC64]: Handle LDC resets properly in domain-services driver. [SPARC64]: Massively simplify VIO device layer and support hot add/remove. [SPARC64]: Simplify VNET probing. [SPARC64]: Simplify VDC device probing. [SPARC64]: Add basic infrastructure for MD add/remove notification.
2007-07-18Merge branch 'xen-upstream' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'xen-upstream' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (44 commits) xen: disable all non-virtual drivers xen: use iret directly when possible xen: suppress abs symbol warnings for unused reloc pointers xen: Attempt to patch inline versions of common operations xen: Place vcpu_info structure into per-cpu memory xen: handle external requests for shutdown, reboot and sysrq xen: machine operations xen: add virtual network device driver xen: add virtual block device driver. xen: add the Xenbus sysfs and virtual device hotplug driver xen: Add grant table support xen: use the hvc console infrastructure for Xen console xen: hack to prevent bad segment register reload xen: lazy-mmu operations xen: Add support for preemption xen: SMP guest support xen: Implement sched_clock xen: Account for stolen time xen: ignore RW mapping of RO pages in pagetable_init xen: Complete pagetable pinning ...
2007-07-18Revert "[POWERPC] Do firmware feature fixups after features are initialised"Tony Breeds
This reverts commit 5a26f6bbb767d7ad23311a1e81cfdd2bebefb855. The original patch causes boot failures when built with ppc64_defconfig. The quickest fix is to revert it while alterates are investigated. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18Fix compile failure in arch/powerpc/kernel/pci-common.cTony Breeds
This fixes the fallout from the recent powerpc merge (commit 489de30259e667d7bc47da9da44a0270b050cd97): CC arch/powerpc/kernel/pci-common.o arch/powerpc/kernel/pci-common.c:160: error: conflicting types for 'pcibios_add_platform_entries' include/linux/pci.h:889: error: previous declaration of 'pcibios_add_platform_entries' was here Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Tested-by: Bret Towe <magnade@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18xen: disable all non-virtual driversJeremy Fitzhardinge
A domU Xen environment has no non-virtual drivers, so make sure they're all disabled at once. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au>
2007-07-18xen: use iret directly when possibleJeremy Fitzhardinge
Most of the time we can simply use the iret instruction to exit the kernel, rather than having to use the iret hypercall - the only exception is if we're returning into vm86 mode, or from delivering an NMI (which we don't support yet). When running native, iret has the behaviour of testing for a pending interrupt atomically with re-enabling interrupts. Unfortunately there's no way to do this with Xen, so there's a window in which we could get a recursive exception after enabling events but before actually returning to userspace. This causes a problem: if the nested interrupt causes one of the task's TIF_WORK_MASK flags to be set, they will not be checked again before returning to userspace. This means that pending work may be left pending indefinitely, until the process enters and leaves the kernel again. The net effect is that a pending signal or reschedule event could be delayed for an unbounded amount of time. To deal with this, the xen event upcall handler checks to see if the EIP is within the critical section of the iret code, after events are (potentially) enabled up to the iret itself. If its within this range, it calls the iret critical section fixup, which adjusts the stack to deal with any unrestored registers, and then shifts the stack frame up to replace the previous invocation. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
2007-07-18xen: suppress abs symbol warnings for unused reloc pointersJeremy Fitzhardinge
arch/i386/xen/xen-asm.S defines some small pieces of code which are used to implement a few paravirt_ops. They're designed so they can be used either in-place, or be inline patched into their callsites if there's enough space. Some of those operations need to make calls out (specifically, if you re-enable events [interrupts], and there's a pending event at that time). These calls need the call instruction to be relocated if the code is patched inline. In this case xen_foo_reloc is a section-relative symbol which points to xen_foo's required relocation. Other operations have no need of a relocation, and so their corresponding xen_bar_reloc is absolute 0. These are the cases which are triggering the warning. This patch adds those symbols to the list of safe abs symbols. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Adrian Bunk <bunk@stusta.de>
2007-07-18xen: Attempt to patch inline versions of common operationsJeremy Fitzhardinge
This patchs adds the mechanism to allow us to patch inline versions of common operations. The implementations of the direct-access versions save_fl, restore_fl, irq_enable and irq_disable are now in assembler, and the same code is used for both out of line and inline uses. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Keir Fraser <keir@xensource.com>
2007-07-18xen: Place vcpu_info structure into per-cpu memoryJeremy Fitzhardinge
An experimental patch for Xen allows guests to place their vcpu_info structs anywhere. We try to use this to place the vcpu_info into the PDA, which allows direct access. If this works, then switch to using direct access operations for irq_enable, disable, save_fl and restore_fl. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Keir Fraser <keir@xensource.com>
2007-07-18xen: handle external requests for shutdown, reboot and sysrqJeremy Fitzhardinge
The guest domain can be asked to shutdown or reboot itself, or have a sysrq key injected, via xenbus. This patch adds a watcher for those events, and does the appropriate action. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org>
2007-07-18xen: machine operationsJeremy Fitzhardinge
Make the appropriate hypercalls to halt and reboot the virtual machine. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Chris Wright <chrisw@sous-sol.org>