aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-05-19x86, io-apic: Don't mark pin_programmed earlyYinghai Lu
Peter bisected that: | commit b9c61b70075c87a8612624736faf4a2de5b1ed30 | Date: Wed May 6 10:10:06 2009 -0700 | | x86/pci: update pirq_enable_irq() to setup io apic routing | | So we can set io apic routing only when enabling the device irq. wrecked his opteron box, ata1 interrupts fail to get through. ata1 is using irq 11: [ 1.451839] sata_svw 0000:01:0e.0: version 2.3 [ 1.456333] sata_svw 0000:01:0e.0: PCI INT A -> GSI 11 (level, low) -> IRQ 11 [ 1.463639] scsi0 : sata_svw [ 1.466949] scsi1 : sata_svw [ 1.470022] scsi2 : sata_svw [ 1.473090] scsi3 : sata_svw [ 1.476112] ata1: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe000 irq 11 [ 1.483490] ata2: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe100 irq 11 [ 1.490870] ata3: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe200 irq 11 [ 1.498247] ata4: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe300 irq 11 that pin is overlapped with pin with legacy ones. We should not set bits in pin_programmed here, so that those bit could be set later via io_apic_set_pci_routing(). [ Impact: fix boot hang on certain systems ] Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org> Tested-by: Peter Zijlstra <peterz@infradead.org> Cc: Jack Steiner <steiner@sgi.com> LKML-Reference: <4A119990.9020606@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabledYinghai Lu
Len expressed concern that the update_mptable feature has side-effects on the ACPI code. Make it sure explicitly that the code only ever gets called if the (default disabled) update_mptable boot quirk option is disabled. [ Impact: isolate the update_mptable feature from ACPI code more ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A0DC832.5090200@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86, irq: update_mptable needs pci_routeirqYinghai Lu
To get all device irq routing and to save them. This is basically an implicit pci=routeirq enablement if (and on if) the update_mptable boot option (which is off by default) has been specified. [ Impact: extend the update_mptable boot opion's scope ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <4A0DB7B4.4060702@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86: don't call read_apic_id if !cpu_has_apicYinghai Lu
should not call that if apic is disabled. [ Impact: fix crash on certain UP configs ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <4A09CCBB.2000306@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86, apic: introduce io_apic_irq_attrYinghai Lu
according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12x86: read apic ID in the !acpi_lapic caseYinghai Lu
Ed found that on 32-bit, boot_cpu_physical_apicid is not read right, when the mptable is broken. Interestingly, actually three paths use/set it: 1. acpi: at that time that is already read from reg 2. mptable: only read from mptable 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit so we could read the apic id for the 2/3 path. We trust the hardware register more than we trust a BIOS data structure (the mptable). We can also avoid the double set_fixmap() when acpi_lapic is used, and also need to move cpu_has_apic earlier and call apic_disable(). Also when need to update the apic id, we'd better read and set the apic version as well - so that quirks are applied precisely. v2: make path 3 with 64bit, use -1 as apic id, so could read it later. v3: fix whitespace problem pointed out by Ed Swierk v5: fix boot crash [ Impact: get correct apic id for bsp other than acpi path ] Reported-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <49FC85A9.2070702@kernel.org> [ v4: sanity-check in the ACPI case too ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12Merge branch 'x86/apic' into irq/numaIngo Molnar
Merge reason: both topics modify the APIC code but were able to do it in parallel so far. An upcoming patch generates a conflict so merge them to avoid the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86: apic: Fixmap apic address even if apic disabledCyrill Gorcunov
In case if apic were disabled by boot option we still need read_apic operation. So fixmap a fake apic area if needed. [ Impact: fix boot crash ] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: yinghai@kernel.org Cc: eswierk@aristanetworks.com LKML-Reference: <20090511134140.GH4624@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86: display extended apic registers with print_local_APIC and cpu_debug codeAndreas Herrmann
Both print_local_APIC (used when apic=debug kernel param is set) and cpu_debug code missed support for some extended APIC registers that I'd like to see. This adds support to show: - extended APIC feature register - extended APIC control register - extended LVT registers [ Impact: print more debug info ] Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <20090508162350.GO29045@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86: read apic ID in the !acpi_lapic caseYinghai Lu
Ed found that on 32-bit, boot_cpu_physical_apicid is not read right, when the mptable is broken. Interestingly, actually three paths use/set it: 1. acpi: at that time that is already read from reg 2. mptable: only read from mptable 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit so we could read the apic id for the 2/3 path. We trust the hardware register more than we trust a BIOS data structure (the mptable). We can also avoid the double set_fixmap() when acpi_lapic is used, and also need to move cpu_has_apic earlier and call apic_disable(). Also when need to update the apic id, we'd better read and set the apic version as well - so that quirks are applied precisely. v2: make path 3 with 64bit, use -1 as apic id, so could read it later. v3: fix whitespace problem pointed out by Ed Swierk [ Impact: get correct apic id for bsp other than acpi path ] Reported-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <49FC85A9.2070702@kernel.org> [ v4: sanity-check in the ACPI case too ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86: apic: Check rev 3 fadt correctly for physical_apic bitYinghai Lu
Impact: fix fadt version checking FADT2_REVISION_ID has value 3 aka rev 3 FADT. So need to use >= instead of >, as other places in the code do. [ Impact: extend scope of APIC boot quirk ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/pci: update pirq_enable_irq() to setup io apic routingYinghai Lu
So we can set io apic routing only when enabling the device irq. This is advantageous for IRQ descriptor allocation affinity: if we set up the IO-APIC entry later, we have a chance to allocate the IRQ descriptor later and know which device it is on and can set affinity accordingly. [ Impact: standardize/enhance irq-enabling sequence for mptable irqs ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C46E.8000501@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: move setup io apic routing out of CONFIG_ACPI scopeYinghai Lu
So we could set io apic routing when ACPI is not enabled. [ Impact: prepare for new functionality ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C422.5070400@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()Yinghai Lu
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: move pin_programmed bit map to io_apic.cYinghai Lu
Prepare to call setup_io_apic_routing() in pcibios_irq_enable() also remove not needed member apic_id. [ Impact: clean up, prepare for future change ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C3DD.3050104@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()Yinghai Lu
The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration code never got mainline because there were open discussions about it. This call is needed to properly update the kernel's copy of the mptable, when the update_mptable boot parameter is needed. Now that the dust has settled with the APIC unification, and since there were no objections when the patch was re-submitted, try this again. [ Impact: fix the update_mptable boot parameter ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C387.7090103@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86: fix alloc_mptable()Yinghai Lu
Fix the conditions when we stop updating the mptable due to running out of slots. [ Impact: fix memory corruption / non-working update_mptable boot parameter ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C3BB.1000609@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: remove irq-compression trick on 32-bitYinghai Lu
We already have a per cpu vector on 32-bit via recent changes, and don't need this trick any more (which trick obfuscates the real GSI mappings and which only triggers on larger systems to begin with): On 3 ioapic system (24 per ioapic) before patch I got: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 after the patch we get: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 As it can be seen that GSIs now get mapped lineary. [ Impact: simplify irq number mapping on bigger 32-bit systems ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C35C.7060207@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11Merge commit 'v2.6.30-rc5' into x86/apicIngo Molnar
Merge reason: this branch was on a .30-rc2 base - sync it up with all the latest fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: MCE: make cmci_discover_lock irq-safe x86: xen, i386: reserve Xen pagetables x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP x86-64: finish cleanup_highmaps()'s job wrt. _brk_end x86: fix boot hang in early_reserve_e820() x86: Fix a typo in a printk message x86, srat: do not register nodes beyond e820 map
2009-05-08Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix return value for sys_ipc microblaze: Storage class should be before const qualifier
2009-05-08x86: MCE: make cmci_discover_lock irq-safeHidetoshi Seto
Lockdep reports the warning below when Li tries to offline one cpu: [ 110.835487] ================================= [ 110.835616] [ INFO: inconsistent lock state ] [ 110.835688] 2.6.30-rc4-00336-g8c9ed89 #52 [ 110.835757] --------------------------------- [ 110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 110.835982] (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b cmci_clear() can be called via smp_call_function_single(). It is better to disable interrupt while holding cmci_discover_lock, to turn it into an irq-safe lock - we can deadlock otherwise. [ Impact: fix possible deadlock in the MCE code ] Reported-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Reported-by: Shaohua Li<shaohua.li@intel.com>
2009-05-08x86: xen, i386: reserve Xen pagetablesJeremy Fitzhardinge
The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMPHuang Ying
Tim Starling reported that crashdump will panic with kernel compiled with CONFIG_KEXEC_JUMP due to null pointer deference in machine_kexec_32.c: machine_kexec(), when deferencing kexec_image. Refering to: http://bugzilla.kernel.org/show_bug.cgi?id=13265 This patch fixes the BUG via replacing global variable reference: kexec_image in machine_kexec() with local variable reference: image, which is more appropriate, and will not be null. Same BUG is in machine_kexec_64.c too, so fixed too in the same way. [ Impact: fix crash on kexec ] Reported-by: Tim Starling <tstarling@wikimedia.org> Signed-off-by: Huang Ying <ying.huang@intel.com> LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07x86-64: finish cleanup_highmaps()'s job wrt. _brk_endJan Beulich
With the introduction of the .brk section, special care must be taken that no unused page table entries remain if _brk_end and _end are separated by a 2M page boundary. cleanup_highmap() runs very early and hence cannot take care of that, hence potential entries needing to be removed past _brk_end must be cleared once the brk allocator has done its job. [ Impact: avoids undesirable TLB aliases ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07x86: fix boot hang in early_reserve_e820()Jan Beulich
If the first non-reserved (sub-)range doesn't fit the size requested, an endless loop will be entered. If a range returned from find_e820_area_size() turns out insufficient in size, the range must be skipped before calling the function again. [ Impact: fixes boot hang on some platforms ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) i.MX31: Disable CPU_32v6K in mx3_defconfig. mx3fb: Fix compilation with CONFIG_PM mx27ads: move PBC mapping out of vmalloc space MXC: remove BUG_ON in interrupt handler mx31: remove mx31moboard_defconfig ARM: ARCH_MXC should select HAVE_CLK mxc : BUG in imx_dma_request mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() [ARM] mv78xx0: update defconfig [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". [ARM] S3C2412: Add missing cache flush in suspend code [ARM] S3C: Add UDIVSLOT support for newer UARTS [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
2009-05-07[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation typesPaul Gortmaker
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman <david.borman@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07[ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)Kevin Hilman
As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use DMA_BIT_MASK(n) Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-06x86: Fix a typo in a printk messageNikanth Karthikesan
[ Impact: printk message cleanup ] Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> LKML-Reference: <200905040908.27299.knikanth@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06x86, srat: do not register nodes beyond e820 mapDavid Rientjes
The mem= option will truncate the memory map at a specified address so it's not possible to register nodes with memory beyond the e820 upper bound. unparse_node() is only called when then node had memory associated with it, although with the mem= option it is no longer addressable. [ Impact: fix boot hang on certain (large) systems ] Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <alpine.DEB.2.00.0905051248150.20021@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06irq: change ->set_affinity() to return status, fixIngo Molnar
This build failure: arch/powerpc/sysdev/mpic.c:810: error: conflicting types for 'mpic_set_affinity' arch/powerpc/sysdev/mpic.h:39: error: previous declaration of 'mpic_set_affinity' was here make[2]: *** [arch/powerpc/sysdev/mpic.o] Error 1 make[2]: *** Waiting for unfinished jobs.... Triggers because the function prototype was not updated when the function call signature got changed by: d5dedd4: irq: change ->set_affinity() to return status [ Impact: build fix on powerpc ] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-05Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] xen_domu_defconfig: fix build issues/warnings
2009-05-05Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: x86, mmiotrace: fix range test tracing: fix ref count in splice pages
2009-05-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo amd-iommu: fix iommu flag masks x86: initialize io_bitmap_base on 32bit x86: gettimeofday() vDSO: fix segfault when tv == NULL
2009-05-05[IA64] xen_domu_defconfig: fix build issues/warningsJan Beulich
- drivers/xen/events.c did not compile - xen_setup_hook caused a modpost section warning - the use of u64 (instead of unsigned long long) together with a %llu in drivers/xen/balloon.c caused a compiler warning Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-05-05Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix setting of oprofile cpu type powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries powerpc adjust oprofile_cpu_type version 3
2009-05-05Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2009-05-05Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-05-05i.MX31: Disable CPU_32v6K in mx3_defconfig.Magnus Lilja
The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mx27ads: move PBC mapping out of vmalloc spaceUwe Kleine-König
Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05MXC: remove BUG_ON in interrupt handlerSascha Hauer
On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mx31: remove mx31moboard_defconfigValentin Longchamp
We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05ARM: ARCH_MXC should select HAVE_CLKGuennadi Liakhovetski
All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mxc : BUG in imx_dma_requestMartin Fuzzey
On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()Martin Fuzzey
The sequence imx_dma_request() imx_dma_enable() imx_dma_free() left the dma channel in_use mode and did not release the timer. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-04[ARM] mv78xx0: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04[ARM] orion5x: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04[ARM] Kirkwood: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfoAndreas Herrmann
Commit 7ad728f98162cb1af06a85b2a5fc422dddd4fb78 (cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t) changed the output of /proc/cpuinfo for siblings: Example on an AMD Phenom: physical id : 0 siblings : 1 core id : 3 cpu cores : 4 Before that commit it was: physical id : 0 siblings : 4 core id : 3 cpu cores : 4 Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings. This is due to the following hunk of above commit: | --- a/arch/x86/kernel/cpu/proc.c | +++ b/arch/x86/kernel/cpu/proc.c | @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf | if (c->x86_max_cores * smp_num_siblings > 1) { | seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); | seq_printf(m, "siblings\t: %d\n", | - cpus_weight(per_cpu(cpu_core_map, cpu))); | + cpumask_weight(cpu_sibling_mask(cpu))); | seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); | seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); | seq_printf(m, "apicid\t\t: %d\n", c->apicid); This was a mistake, because the impact line shows that this side-effect was not anticipated: Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y So revert the respective hunk to restore the old behavior. [ Impact: fix sibling-info regression in /proc/cpuinfo ] Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090504182859.GA29045@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:25:35 +0000