aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-02-07[POWERPC] bootwrapper: Build multiple cuImagesGrant Likely
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Fake NUMA emulation for PowerPCBalbir Singh
Here's a dumb simple implementation of fake NUMA nodes for PowerPC. Fake NUMA nodes can be specified using the following command line option numa=fake=<node range> node range is of the format <range1>,<range2>,...<rangeN> Each of the rangeX parameters is passed using memparse(). I find the patch useful for fake NUMA emulation on my simple PowerPC machine. I've tested it on a numa box with the following arguments numa=fake=512M numa=fake=512M,768M numa=fake=256M,512M mem=512M numa=fake=1G mem=768M numa=fake= without any numa= argument The other side-effect introduced by this patch is that; in the case where we don't have NUMA information, we now set a node online after adding each LMB. This node could very well be node 0, but in the case that we enable fake NUMA nodes, when we cross node boundaries, we need to set the new node online. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=yOlof Johansson
Looks like "[POWERPC] kdump shutdown hook support" broke builds when CONFIG_DEBUGGER=n and CONFIG_KEXEC=y, such as in g5_defconfig: arch/powerpc/kernel/crash.c: In function 'default_machine_crash_shutdown': arch/powerpc/kernel/crash.c:388: error: '__debugger_fault_handler' undeclared (first use in this function) arch/powerpc/kernel/crash.c:388: error: (Each undeclared identifier is reported only once arch/powerpc/kernel/crash.c:388: error: for each function it appears in.) Move the debugger hooks to under CONFIG_DEBUGGER || CONFIG_KEXEC, since that's when the crash code is enabled. (I should have caught this with my build-script pre-merge, my bad. :( ) Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras
into for-2.6.25
2008-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix deadlock, make pgd_lock irq-safe virtio: fix trivial build bug x86: fix mttr trimming x86: delay CPA self-test and repeat it x86: fix 64-bit sections generic: add __FINITDATA x86: remove suprious ifdefs from pageattr.c x86: mark the .rodata section also NX x86: fix iret exception recovery on 64-bit cpuidle: dubious one-bit signed bitfield in cpuidle.h x86: fix sparse warnings in powernow-k8.c x86: fix sparse error in traps_32.c x86: trivial sparse/checkpatch in quirks.c x86 ptrace: disallow null cs/ss MAINTAINERS: RDC R-321x SoC maintainer brk randomization: introduce CONFIG_COMPAT_BRK brk: check the lower bound properly x86: remove X2 workaround x86: make spurious fault handler aware of large mappings x86: make traps on entry code be debuggable in user space, 64-bit
2008-02-06x86: fix deadlock, make pgd_lock irq-safeIngo Molnar
lockdep just caught this one: ================================= [ INFO: inconsistent lock state ] 2.6.24 #38 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes: (pgd_lock){-+..}, at: [<ffffffff8022a9ea>] mm_init+0x1da/0x250 {in-softirq-W} state was registered at: [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 394559 hardirqs last enabled at (394559): [<ffffffff80267f0a>] get_page_from_freelist+0x30a/0x4c0 hardirqs last disabled at (394558): [<ffffffff80267d25>] get_page_from_freelist+0x125/0x4c0 softirqs last enabled at (393952): [<ffffffff80232f8e>] __do_softirq+0xce/0xe0 softirqs last disabled at (393945): [<ffffffff8020c57c>] call_softirq+0x1c/0x30 other info that might help us debug this: no locks held by swapper/1. stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.24 #38 Call Trace: [<ffffffff8024e1fb>] print_usage_bug+0x18b/0x190 [<ffffffff8024f55d>] mark_lock+0x53d/0x560 [<ffffffff8024fffa>] __lock_acquire+0x3ca/0xed0 [<ffffffff80250ba8>] lock_acquire+0xa8/0xe0 [<ffffffff8022a9ea>] ? mm_init+0x1da/0x250 [<ffffffff809bcd10>] _spin_lock+0x30/0x70 [<ffffffff8022a9ea>] mm_init+0x1da/0x250 [<ffffffff8022aa99>] mm_alloc+0x39/0x50 [<ffffffff8028b95a>] bprm_mm_init+0x2a/0x1a0 [<ffffffff8028d12b>] do_execve+0x7b/0x220 [<ffffffff80209776>] sys_execve+0x46/0x70 [<ffffffff8020c214>] kernel_execve+0x64/0xd0 [<ffffffff8020901e>] ? _stext+0x1e/0x20 [<ffffffff802090ba>] init_post+0x9a/0xf0 [<ffffffff809bc5f6>] ? trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8024f75a>] ? trace_hardirqs_on+0xba/0xd0 [<ffffffff8020c1a8>] ? child_rip+0xa/0x12 [<ffffffff8020bcbc>] ? restore_args+0x0/0x44 [<ffffffff8020c19e>] ? child_rip+0x0/0x12 turns out that pgd_lock has been used on 64-bit x86 in an irq-unsafe way for almost two years, since commit 8c914cb704a11460e. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-06x86: fix mttr trimmingYinghai Lu
Pavel Emelyanov reported that his networking card did not work and bisected it down to: " The commit 093af8d7f0ba3c6be1485973508584ef081e9f93 x86_32: trim memory by updating e820 broke my e1000 card: on loading driver says that e1000: probe of 0000:04:03.0 failed with error -5 and the interface doesn't appear. " on a 32-bit kernel, base will overflow when try to do PAGE_SHIFT, and highest_addr will always less 4G. So use pfn instead of address to avoid the overflow when more than 4g RAM is installed on a 32-bit kernel. Many thanks to Pavel Emelyanov for reporting and testing it. Bisected-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Tested-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: delay CPA self-test and repeat itIngo Molnar
delay the CPA self-test so that any impact (corruption) of user-space pagetables can be triggered. Repeat the test every 30 seconds. this would have prevented the bug fixed by 8cb2a7c1e95e472b5, at its source. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: fix 64-bit sectionsSam Ravnborg
fix 64-bit section warnings. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: remove suprious ifdefs from pageattr.cArjan van de Ven
The .rodata section really should just be read only; the config option is there to make breaking up the 2Mb page an option (so people whos machines give more performance for the 2Mb case can opt to do so). But when the page gets split anyway, this is no longer an issue, so clean up the code and remove the ifdefs Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: mark the .rodata section also NXArjan van de Ven
The .rodata section shouldn't just be read-only, but also non-executable. This is free since we've broken up the 2MB page already anyway. also update test_nx to check for this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: fix iret exception recovery on 64-bitRoland McGrath
This change broke recovery of exceptions in iret: commit 72fe4858544292ad64600765cb78bc02298c6b1c Author: Glauber de Oliveira Costa <gcosta@redhat.com> x86: replace privileged instructions with paravirt macros The ENTRY(native_iret) macro adds alignment padding before the iretq instruction, so "iret_label" no longer points exactly at the instruction. It was sloppy to leave the old "iret_label" label behind when replacing its nearby use. Removing it would have revealed the other use of the label later in the file, and upon noticing that use, anyone exercising the minimum of attention to detail expected of anyone touching this subtle code would realize it needed to change as well. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: fix sparse warnings in powernow-k8.cHarvey Harrison
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:7: warning: symbol 'hi' shadows an earlier one arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:6: originally declared here arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:15: warning: symbol 'lo' shadows an earlier one arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:14: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: fix sparse error in traps_32.cHarvey Harrison
This was being used to ensure the proper alignment of the FXSAVE/FXRSTOR data. This would create a sparse error in the _correct_ cases, hiding further warnings. Use BUILD_BUG_ON instead. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: trivial sparse/checkpatch in quirks.cHarvey Harrison
arch/x86/kernel/quirks.c:384:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:387:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:390:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:393:3: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86 ptrace: disallow null cs/ssRoland McGrath
In my revamp of the x86 ptrace code for setting register values, I accidentally omitted a check that was there in the old code. Allowing %cs to be 0 causes a bad crash in recovery from iret failure. This patch fixes that regression against 2.6.24, and adds a comment that should help prevent this subtlety from being overlooked again. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: remove X2 workaroundIngo Molnar
With the spurious handler fix, the X2 does not lock up anymore. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: make spurious fault handler aware of large mappingsThomas Gleixner
In very rare cases, on certain CPUs, we could end up in the spurious fault handler and ignore a large pud/pmd mapping. The resulting pte pointer points into the mapped physical space and dereferencing it will fault recursively. Make the code aware of large mappings and do the permission check on the pmd/pud entry, when a large pud/pmd mapping is detected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06x86: make traps on entry code be debuggable in user space, 64-bitRoland McGrath
Unify the x86-64 behavior for 32-bit processes that set bogus %cs/%ss values (the only ones that can fault in iret) match what the native i386 behavior is. (do not kill the task via do_exit but generate a SIGSEGV signal) [ tglx@linutronix.de: build fix ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06[POWERPC] mpc512x: Device tree for MPC5121 ADSJohn Rigby
Minimal /dts-v1/ device tree for mpc5121 ads. port-number property in uart nodes will go away after the driver learns to use aliases Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06[POWERPC] mpc512x: Basic platform supportJohn Rigby
512x is very similar to 83xx and most of this is patterned after code from 83xx. New platform: changed: arch/powerpc/Kconfig arch/powerpc/platforms/Kconfig arch/powerpc/platforms/Kconfig.cputype arch/powerpc/platforms/Makefile new: arch/powerpc/platforms/512x/* include/asm-powerpc/mpc512x.h Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix.c:piix_init_one() must be __devinit sata_via.c: Remove missleading comment. libata-core: unblacklist HITACHI drives sata_nv: fix ATAPI issues with memory over 4GB (v7) ata: drivers/ata/sata_mv.c needs dmapool.h libata: kill now unused n_iter and fix sata_fsl ahci: fix CAP.NP and PI handling sata_mv: Support SoC controllers Rename: linux/pata_platform.h to linux/ata_platform.h
2008-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Temporarily remove IOMMU merging code. [SPARC64]: Update defconfig. [SPARC]: Add new timerfd syscall entries.
2008-02-06atmel_lcdfb: backlight controlDavid Brownell
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: add HPET RTC emulation to RTC_DRV_CMOSBernhard Walle
That patch adds the RTC emulation of the HPET timer to the new RTC_DRV_CMOS. The old drivers/char/rtc.ko driver had that functionality and it's important on new systems. [akpm@linux-foundation.org: unbreak alpha build] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06idle_regs() must be __cpuinitAdrian Bunk
Fix the following section mismatch with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x399a6): Section mismatch: reference to .init.text.5:idle_regs (between 'fork_idle' and 'get_task_mm') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06calibrate_delay() must be __cpuinitAdrian Bunk
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06get rid of NR_OPEN and introduce a sysctl_nr_openEric Dumazet
NR_OPEN (historically set to 1024*1024) actually forbids processes to open more than 1024*1024 handles. Unfortunatly some production servers hit the not so 'ridiculously high value' of 1024*1024 file descriptors per process. Changing NR_OPEN is not considered safe because of vmalloc space potential exhaust. This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to 1024*1024, so that admins can decide to change this limit if their workload needs it. [akpm@linux-foundation.org: export it for sparc64] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06alpha/parisc: remove config variable DEBUG_RWLOCKJiri Olsa
Remove config variable DEBUG_RWLOCK, since it is not used. Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06read_current_timer() cleanupsAndrew Morton
- All implementations can be __devinit - The function prototypes were in asm/timex.h but they all must be the same, so create a single declaration in linux/timex.h. - uninline the sparc64 version to match the other architectures - Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value. [ezk@cs.sunysb.edu: fix build] Cc: "David S. Miller" <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06scheduled OSS driver removalAdrian Bunk
This patch contains the scheduled removal of OSS drivers whose config options have been removed in 2.6.23. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06proper show_interrupts() prototypeAdrian Bunk
Add a proper prototype for show_interrupts() in include/linux/interrupt.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06cleanup after APUS removalAdrian Bunk
After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06remove support for un-needed _extratext sectionRobin Getz
When passing a zero address to kallsyms_lookup(), the kernel thought it was a valid kernel address, even if it is not. This is because is_ksym_addr() called is_kernel_extratext() and checked against labels that don't exist on many archs (which default as zero). Since PPC was the only kernel which defines _extra_text, (in 2005), and no longer needs it, this patch removes _extra_text support. For some history (provided by Jon): http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019734.html http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019736.html http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019751.html [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jon Loeliger <jdl@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove pointless casts from void pointersJeff Garzik
Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove inclusions of <linux/autoconf.h>Ralf Baechle
Nothing should ever include this file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Mike Frysinger" <vapier.adi@gmail.com> Acked-by: "Bryan Wu" <cooloney.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06taskstats scaled time cleanupMichael Neuling
This moves the ability to scale cputime into generic code. This allows us to fix the issue in kernel/timer.c (noticed by Balbir) where we could only add an unscaled value to the scaled utime/stime. This adds a cputime_to_scaled function. As before, the POWERPC version does the scaling based on the last SPURR/PURR ratio calculated. The generic and s390 (only other arch to implement asm/cputime.h) versions are both NOPs. Also moves the SPURR and PURR snapshots closer. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06[POWERPC] Xilinx: Update compatible to use values generated by BSP generator.Stephen Neuendorffer
Mainly, this involves two changes: 1) xilinx->xlnx (recognized standard is to use the stock ticker) 2) In order to have the device tree focus on describing what the hardware is as exactly as possible, the compatible strings contain the full IP name and IP version. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06[SPARC64]: Temporarily remove IOMMU merging code.David S. Miller
Changeset fde6a3c82d67f592eb587be4d12222b0ae6d4321 ("iommu sg merging: sparc64: make iommu respect the segment size limits") broke sparc64 because whilst it added the segment limiting code to the first pass of SG mapping (in prepare_sg()) it did not add matching code to the second pass handling (in fill_sg()) As a result the two passes disagree where the segment boundaries should be, resulting in OOPSes, DMA corruption, and corrupted superblocks. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-06[SPARC64]: Update defconfig.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-06[SPARC]: Add new timerfd syscall entries.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-06Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
2008-02-06[POWERPC] arch/powerpc/platforms/82xx: Add missing of_node_putJulia Lawall
Of_get_parent and of_find_compatible_node do a of_node_get, and thus a corresponding of_code_put is needed in both the error case and the normal return case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] arch/powerpc/sysdev: Add missing of_node_putJulia Lawall
The functions of_find_compatible_node and of_find_node_by_type both call of_node_get on their result. So any error handling code thereafter should call of_node_put(np). This is taken care of in the case where there is a goto out, but not when there is a direct return. The function irq_alloc_host puts np into the returned structure, which is stored in the global variable mpc8xx_pic_host, so the reference count should be set for the lifetime of that variable. The current solution ups the reference count again in the argument to irq_alloc_host so that it can be decremented on the way out. This seems a bit unnecessary, and also doesn't work in the case where irq_alloc_host fails, because then the reference count only goes does by one, whereas it should go down by two. A better solution is to not increment the reference count in the argument to irq_alloc_host and only decrement it on the way out in an error case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] arch/powerpc/platforms/pseries: Add missing of_node_putJulia Lawall
Of_get_parent and of_find_compatible_node do an of_node_get, and thus a corresponding of_code_put is needed in the error case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-05[POWERPC] 85xx: Add second cpu to 8572 dtsKumar Gala
The 8572 is a dual core processor, not reason not to describe both cores in the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] qe_lib: fix few fluffy negligencesAnton Vorontsov
One is intoduced by me (of_node_put() absence) and another was present already (not checking for NULL). Found by Stephen Rothwell. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Update mpc83xx_defconfigKim Phillips
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] FSL: fix mpc83xx_spi device registrationKim Phillips
calling platform_device_register after platform_device_alloc causes this: kobject (c3841a70): tried to init an initialized object, something is seriously wrong. Call Trace: [c381fe20] [c0007bb8] show_stack+0x3c/0x194 (unreliable) [c381fe50] [c01322a8] kobject_init+0xb8/0xbc [c381fe60] [c01591cc] device_initialize+0x30/0x9c [c381fe80] [c015ee34] platform_device_register+0x1c/0x34 [c381fea0] [c02f1fe0] of_fsl_spi_probe+0x21c/0x22c [c381ff30] [c02f2044] fsl_spi_init+0x54/0x160 [c381ff60] [c02f3924] __machine_initcall_mpc832x_rdb_mpc832x_spi_init+0x120/0x138 [c381ff70] [c02e61b4] kernel_init+0x98/0x284 [c381fff0] [c000f740] kernel_thread+0x44/0x60 fixed by calling platform_device_add (second half of platform_device_register) instead. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:39:02 +0000