aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-10-01MN10300: Fix IRQ handlingDavid Howells
Fix the IRQ handling on the MN10300 arch. This patch makes a number of significant changes: (1) It separates the irq_chip definition for edge-triggered interrupts from the one for level-triggered interrupts. This is necessary because the MN10300 PIC latches the IRQ channel's interrupt request bit (GxICR_REQUEST), even after the device has ceased to assert its interrupt line and the interrupt channel has been disabled in the PIC. So for level-triggered interrupts we need to clear this bit when we re-enable - which is achieved by setting GxICR_DETECT but not GxICR_REQUEST when writing to the register. Not doing this results in spurious interrupts occurring because calling mask_ack() at the start of handle_level_irq() is insufficient - it fails to clear the REQUEST latch because the device that caused the interrupt is still asserting its interrupt line at this point. (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (4) The end() operation is now left to the default (no-operation) as __do_IRQ() is compiled out. This may affect misrouted_irq(), but according to Thomas Gleixner it's the correct thing to do. (5) handle_level_irq() is used for edge-triggered interrupts rather than handle_edge_irq() as the MN10300 PIC latches interrupt events even on masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is sufficient to call mask_ack() at the start and unmask() at the end. (6) For level-triggered interrupts, ack() is now NULL as it's not used, and there is no effective ACK function on the PIC. mask_ack() is now the same as mask() as the latch continues to latch, even when the channel is masked. Further, the patch discards the disable() op implementation as its now the same as the mask() op implementation, which is used instead. It also discards the enable() op implementations as they're now the same as the unmask() op implementations, which are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01x86: change MTRR_SANITIZER to def_bool yYinghai Lu
This option has been added in v2.6.26 as a default-disabled feature and went through several revisions since then. The feature fixes a wide range of MTRR setup problems that BIOSes leave us with: slow system, slow Xorg, slow system when adding lots of RAM, etc., so we want to enable it by default for v2.6.28. See: [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs http://bugzilla.kernel.org/show_bug.cgi?id=10508 and the test results in: http://lkml.org/lkml/2008/9/29/273 1. hpa reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC range0: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB hole: 000000013c000000 - 0000000140000000 Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC 2. Dylan Taft reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1 reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c8000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB hole: 00000000c7e00000 - 00000000c8000000 Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC rangeX: 0000000100000000 - 0000000130000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB 3. Gabriel reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M range0: 0000000000000000 - 00000000d0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB hole: 00000000cf600000 - 00000000cf800000 Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC rangeX: 0000000100000000 - 000000012c000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB 4. Mika Fischer reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC rangeX: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30x86, vmi: fix broken LDT accessZachary Amsden
This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: stable@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30x86: Fix broken LDT access in VMIZachary Amsden
After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Put the space for cpu0 per-cpu area into .data section
2008-09-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix failure to shutdown with CPU hotplug powerpc: Fix PCI in Holly device tree
2008-09-30x86, debug printouts: IOMMU setup failures should not be KERN_ERRAdam Jackson
The number of BIOSes that have an option to enable the IOMMU, or fix anything about its configuration, is vanishingly small. There's no good reason to punish quiet boot for this. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30x86: fix typo in enable_mtrr_cleanup early parameterJ.A. Magallón
Correct typo for 'enable_mtrr_cleanup' early boot param name. Signed-off-by: J.A. Magallon <jamagallon@ono.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30x86: export set_memory_ro and set_memory_rwBruce Allan
Export set_memory_ro() and set_memory_rw() calls for use by drivers that need to have more debug information about who might be writing to memory space. this was initially developed for use while debugging a memory corruption problem with e1000e. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-29x86: mtrr_cleanup try gran_size to less than 1MYinghai Lu
one have gran < 1M reg00: base=0xd8000000 (3456MB), size= 128MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0xd7f80000 (3455MB), size= 512KB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 512K chunk_size: 2M num_reg: 7 lose RAM: 0G range0: 0000000000000000 - 00000000d8000000 Setting variable MTRR 0, base: 0GB, range: 2GB, type WB Setting variable MTRR 1, base: 2GB, range: 1GB, type WB Setting variable MTRR 2, base: 3GB, range: 256MB, type WB Setting variable MTRR 3, base: 3328MB, range: 128MB, type WB hole: 00000000d7f00000 - 00000000d7f80000 Setting variable MTRR 4, base: 3455MB, range: 512KB, type UC rangeX: 0000000100000000 - 0000000128000000 Setting variable MTRR 5, base: 4GB, range: 512MB, type WB Setting variable MTRR 6, base: 4608MB, range: 128MB, type WB so start from 64k instead of 1M Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-29x86: mtrr_cleanup prepare to make gran_size to less 1MYinghai Lu
make the print out right with size < 1M Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-30powerpc: Fix failure to shutdown with CPU hotplugJohannes Berg
I tracked down the shutdown regression to CPUs not dying when being shut down during power-off. This turns out to be due to the system_state being SYSTEM_POWER_OFF, which this code doesn't take as a valid state for shutting off CPUs in. This has never made sense to me, but when I added hotplug code to implement hibernate I only "made it work" and did not question the need to check the system_state. Thomas Gleixner helped me dig, but the only thing we found is that it was added with the original commit that added CPU hotplug support. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-09-30powerpc: Fix PCI in Holly device treeDavid Gibson
The PCI bridge on the Holly board is incorrectly represented in the device tree. The current device tree node for the PCI bridge sits under the tsi-bridge node. That's not obviously wrong, but the PCI bridge translates some PCI spaces into CPU address ranges which were not translated by the "ranges" property in tsi-bridge node. We used to get away with this problem because the PCI bridge discovery code was also buggy, assuming incorrectly that PCI host bridge nodes were always directly under the root bus and treating the translated addresses as raw CPU addresses, rather than parent bus addresses. This has since been fixed, thus breaking Holly. This could be fixed by adding extra translations to the tsi-bridge node, but this patch instead moves the Holly PCI bridge out of the tsi-bridge node to the root bus. This makes the tsi-bridge node represent only the built-in IO devices in the bridge, with a more-or-less contiguous address range. This is the same convention used on Freescale SoC chips, where the "soc" node represents only the IMMR region, and the PCI and other bus bridges are separate nodes under the root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-09-29x86: mtrr_cleanup safe to get more spare regs nowYinghai Lu
Delay exit to make sure we can actually get the optimal result in as many cases as possible. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-29[IA64] Put the space for cpu0 per-cpu area into .data sectionTony Luck
Initial fix for making sure that we can access percpu variables in all C code (commit: 10617bbe84628eb18ab5f723d3ba35005adde143) inadvertantly allocated the memory in the "percpu" section of the vmlinux ELF executable. This confused kexec/dump. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-09-29Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable apm on the olpc
2008-09-29Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices [MIPS] BCM47xx: Fix build error due to missing PCI functions [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. [MIPS] au1000: Make sure GPIO value is zero or one
2008-09-29Merge branch 'linux-m32r' of git://www.linux-m32r.org/git/takata/linux-2.6_devLinus Torvalds
* 'linux-m32r' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r/kernel/: cleanups m32r: export __ndelay m32r: export empty_zero_page m32r: don't offer CONFIG_ISA m32r: remove the unused NOHIGHMEM option
2008-09-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdboc,tty: Fix tty polling search to use name correctly kgdb, x86_64: fix PS CS SS registers in gdb serial kgdb, x86_64: gdb serial has BX and DX reversed kgdb, x86, arm, mips, powerpc: ignore user space single stepping kgdb: could not write to the last of valid memory with kgdb
2008-09-29x86_64: be less annoying on boot, v2dcg
Honour "quiet" boot parameter in early_printk() calls Signed-off-by: Diego Calleja <diegocg@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-28x86: mtrr_cleanup hole size should be less than half of chunk_size, v2Yinghai Lu
v2: should check with half of range0 size instead of chunk_size So don't have silly big hole. in hpa's case we could auto detect instead of adding mtrr_chunk_size in command line. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-27x86: add mtrr_cleanup_debug command lineYinghai Lu
add mtrr_cleanup_debug to print out more info about layout Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-27x86: mtrr_cleanup optimization, v2Yinghai Lu
fix hpa's t61 with 4g ram: change layout from (n - 1)*chunksize + chunk_size - NC to n*chunksize - NC Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-27x86: don't need to go to chunksize to 4GYinghai Lu
change back chunksize max to 2g otherwise will get strange layout in 2G ram system like 0 - 4g WB, 2040M - 2048M UC, 2048M - 4G NC instead of 0 - 2g WB, 2040M - 2048M UC Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-27[MIPS] BCM47xx: Fix build error due to missing PCI functionsAurelien Jarno
This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27[MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error.Ralf Baechle
pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27[MIPS] au1000: Make sure GPIO value is zero or oneBruno Randolf
David Brownell <david-b@pacbell.net> wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27m32r/kernel/: cleanupsAdrian Bunk
This patch contains the following cleanups: - make the following needlessly global code static: - entry.S: resume_userspace - process.c: pm_idle - process.c: default_idle() - smp.c: send_IPI_allbutself() - time.c: timer_interrupt() - time.c: struct irq0 - traps.c: set_eit_vector_entries() - traps.c: kstack_depth_to_print - traps.c: show_trace() - traps.c: die_lock - remove the following unused code: - head.S: startup_32 - process.c: hlt_counter - process.c: disable_hlt() - process.c: enable_hlt() - process.c: dump_task_regs() - remove the following variables and their usages since they were always 0: - irq.c: irq_err_count - irq.c: irq_mis_count Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2008-09-27m32r: export __ndelayAdrian Bunk
ERROR: "__ndelay" [drivers/spi/spi_bitbang.ko] undefined! Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2008-09-27m32r: export empty_zero_pageAdrian Bunk
ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2008-09-27m32r: don't offer CONFIG_ISAAdrian Bunk
As far as I know no M32R hardware actually has ISA slots. And ISA drivers don't compile on M32R. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2008-09-27m32r: remove the unused NOHIGHMEM optionAdrian Bunk
Remove the unused NOHIGHMEM option. Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2008-09-26ARM: Delete ARM's own cnt32_to_63.hDavid Howells
Delete ARM's own cnt32_to_63.h as the copy in include/linux/ should now be used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-26kgdb, x86_64: fix PS CS SS registers in gdb serialJason Wessel
On x86_64 the gdb serial register structure defines the PS (also known as eflags), CS and SS registers as 4 bytes entities. This patch splits the x86_64 regnames enum into a 32 and 64 version to account for the 32 bit entities in the gdb serial packets. Also the program counter is properly filled in for the sleeping threads. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-26kgdb, x86, arm, mips, powerpc: ignore user space single steppingJason Wessel
On the x86 arch, user space single step exceptions should be ignored if they occur in the kernel space, such as ptrace stepping through a system call. First check if it is kgdb that is executing a single step, then ensure it is not an accidental traversal into the user space, while in kgdb, any other time the TIF_SINGLESTEP is set, kgdb should ignore the exception. On x86, arm, mips and powerpc, the kgdb_contthread usage was inconsistent with the way single stepping is implemented in the kgdb core. The arch specific stub should always set the kgdb_cpu_doing_single_step correctly if it is single stepping. This allows kgdb to correctly process an instruction steps if ptrace happens to be requesting an instruction step over a system call. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-25x86_64: be less annoying on bootBill Nottingham
Remove mostly useless message on every boot. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: prevent stale state of c1e_mask across CPU offline/online, fix
2008-09-24Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fixe the definition of PTRS_PER_PGD [MIPS] au1000: Fix gpio direction
2008-09-24MN10300: Make sched_clock() report time since bootDavid Howells
Make sched_clock() report time since boot rather than time since last timer interrupt. Make sched_clock() expand and scale the 32-bit TSC value running at IOCLK speed (~33MHz) to a 64-bit nanosecond counter, using cnt32_to_63() acquired from the ARM arch and without using slow DIVU instructions every call. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-24MN10300: Move asm-arm/cnt32_to_63.h to include/linux/David Howells
Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make use of it too. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-24x86, olpc: fix endian bug in openfirmware workaroundHarvey Harrison
Boardrev is always treated as a u32 everywhere else, no reason to byteswap the 0xc2 value. The only use is to print out if it is a prerelease board, the test being: (olpc_platform_info.boardrev & 0xf) < 8 Which is currently always true as be32_to_cpu(0xc2) & 0xf = 0 but I doubt that was the intention here. The consequences of the bug are pretty minor though (incorrect boardrev displayed in dmesg when ofw support not configured) Also annotate the temporary used to read the boardrev in the ofw case. The confusion was noticed by Sparse: arch/x86/kernel/olpc.c:206:32: warning: cast to restricted __be32 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24x86: ds.c ptrace.c integer as NULL pointer sparse fixesHarvey Harrison
fix: arch/x86/kernel/ptrace.c:763:29: warning: Using plain integer as NULL pointer arch/x86/kernel/ptrace.c:777:46: warning: Using plain integer as NULL pointer arch/x86/kernel/ptrace.c:1115:45: warning: Using plain integer as NULL pointer arch/x86/kernel/ds.c:482:26: warning: Using plain integer as NULL pointer arch/x86/kernel/ds.c:487:25: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24Merge commit 'v2.6.27-rc7' into x86/pebsIngo Molnar
2008-09-24x86: disable apm on the olpcJeremy Katz
The OLPC doesn't support APM but also doesn't have DMI, so we can't detect and disable it based on DMI data. So, just disable based on machine_is_olpc() Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24x86: prevent stale state of c1e_mask across CPU offline/online, fixMarc Dionne
Fix build error introduced by commit 4faac97d44ac27 ("x86: prevent stale state of c1e_mask across CPU offline/online"). process_32.c needs to include idle.h to get the prototype for c1e_remove_cpu() Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24[MIPS] au1000: Fix gpio directionBruno Randolf
When setting the direction of one GPIO pin we have to keep the state of the other pins, hence use binary OR. Also gpio_direction_output() wants to set an initial value, so add that too. This fixes a problem with the USB power switch on mtx-1 boards. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-23Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: fix build error in !oneshot case x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC x86: prevent C-states hang on AMD C1E enabled machines clockevents: prevent mode mismatch on cpu online clockevents: check broadcast device not tick device clockevents: prevent stale tick_next_period for onlining CPUs x86: prevent stale state of c1e_mask across CPU offline/online clockevents: prevent cpu online to interfere with nohz
2008-09-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix 27-rc crash on vsmp due to paravirt during module load x86, oprofile: BUG scheduling while atomic AMD IOMMU: protect completion wait loop with iommu lock AMD IOMMU: set iommu sunc flag after command queuing
2008-09-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] kexec fails on systems with blocks of uncached memory [IA64] Ski simulator doesn't need check_sal_cache_flush
2008-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix missing devices due to PCI bridge test in of_create_pci_dev(). sparc64: Fix disappearing PCI devices on e3500.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 19:33:49 +0000