aboutsummaryrefslogtreecommitdiff
path: root/block/ll_rw_blk.c
AgeCommit message (Collapse)Author
2007-10-17[BLOCK] blk_rq_map_sg() next_sg fixupJens Axboe
Don't ever use sg_next() on the last entry, it may not be valid! Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17mm: bdi init hooksPeter Zijlstra
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[BLOCK] Clear sg entry before filling in blk_rq_map_sg()Jens Axboe
The memset() of the sg entry was originally removed, because it could overwrite a chain pointer. But it's quite OK to memset() it when we know it's a valid entry, since it can't contain a chain pointer. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
2007-10-16readahead: remove the limit max_sectors_kb imposed on max_readahead_kbFengguang Wu
Remove the size limit max_sectors_kb imposed on max_readahead_kb. The size restriction is unreasonable. Especially when max_sectors_kb cannot grow larger than max_hw_sectors_kb, which can be rather small for some disk drives. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16ll_rw_blk: temporarily enable max_segments tweakingJens Axboe
Expose this setting for now, so that users can play with enabling large commands without defaulting it to on globally. This is a debug patch, it will be dropped for the final versions. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: convert to using sg helpersJens Axboe
Convert the main rq mapper (blk_rq_map_sg()) to the sg helper setup. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: convert blkdev_issue_flush() to use empty barriersJens Axboe
Then we can get rid of ->issue_flush_fn() and all the driver private implementations of that. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: Initial support for data-less (or empty) barrier supportJens Axboe
This implements functionality to pass down or insert a barrier in a queue, without having data attached to it. The ->prepare_flush_fn() infrastructure from data barriers are reused to provide this functionality. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: factor our bio_check_eod()Jens Axboe
End of device check is done twice in __generic_make_request() and it's fully inlined each time. Factor out bio_check_eod(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: add end_queued_request() and end_dequeued_request() helpersJens Axboe
We can use this helper in the elevator core for BLKPREP_KILL, and it'll also be useful for the empty barrier patch. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: ll_rw_blk.c: cosmeticsJens Axboe
Fix ?: construct, a typo, whitespace, and similar. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12kobjects: fix up improper use of the kobject name fieldGreg Kroah-Hartman
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.
2007-10-10Drop 'size' argument from bio_endio and bi_end_ioNeilBrown
As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Don't decrement bi_size in bio_endioNeilBrown
The only caller of bio_endio that does not pass the full bi_size is end_that_request_first. Also, no ->bi_end_io method is really interested in bi_size being decremented. So move the decrement and related code into ll_rw_blk and merge it with order_bio_endio to form req_bio_endio which does endio functionality specific to request completion. As some ->bi_end_io methods do check bi_size of 0, we set it thus for now, but that will go in the next patch. Signed-off-by: Neil Brown <neilb@suse.de> ### Diffstat output ./block/ll_rw_blk.c | 42 +++++++++++++++++++++++++++--------------- ./fs/bio.c | 23 +++++++++++------------ 2 files changed, 38 insertions(+), 27 deletions(-) diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Remove flush_dry_bio_endioNeilBrown
The entire function of flush_dry_bio_endio is to undo the effects of bio_endio (when called on a barrier request). So remove the function and the call to bio_endio. This allows us to remove "bi_size" from "struct request_queue". Signed-off-by: Neil Brown <neilb@suse.de> ### Diffstat output ./block/ll_rw_blk.c | 39 ++------------------------------------- ./include/linux/blkdev.h | 1 - 2 files changed, 2 insertions(+), 38 deletions(-) diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10ll_rw_blk: blk_cpu_notifier should be __cpuinitdataSatyam Sharma
blk_cpu_notifier is marked as __devinitdata, but __devinitdata need not be __init even if HOTPLUG_CPU=n, which wastes space. It should be marked __cpuinitdata, and the callback itself as __cpuinit. Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Fixup rq_for_each_segment() indentationJens Axboe
Remove one level of nesting where appropriate. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Share code between init_request_from_bio and blk_rq_bio_prepNeilBrown
These have very similar functions and should share code where possible. Signed-off-by: Neil Brown <neilb@suse.de> diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Stop exporting blk_rq_bio_prepNeilBrown
blk_rq_bio_prep is exported for use in exactly one place. That place can benefit from using the new blk_rq_append_bio instead. So - change dm-emc to call blk_rq_append_bio - stop exporting blk_rq_bio_prep, and - initialise rq_disk in blk_rq_bio_prep, as dm-emc needs it. Signed-off-by: Neil Brown <neilb@suse.de> diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10New function blk_req_append_bioNeilBrown
ll_back_merge_fn is currently exported to SCSI where is it used, together with blk_rq_bio_prep, in exactly the same way these functions are used in __blk_rq_map_user. So move the common code into a new function (blk_rq_append_bio), and don't export ll_back_merge_fn any longer. Signed-off-by: Neil Brown <neilb@suse.de> diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Introduce rq_for_each_segment replacing rq_for_each_bioNeilBrown
Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Merge blk_recount_segments into blk_recalc_rq_segmentsNeilBrown
blk_recalc_rq_segments calls blk_recount_segments on each bio, then does some extra calculations to handle segments that overlap two bios. If we merge the code from blk_recount_segments into blk_recalc_rq_segments, we can process the whole request one bio_vec at a time, and not need the messy cross-bio calculations. Then blk_recount_segments can be implemented by calling blk_recalc_rq_segments, passing it a simple on-stack request which stores just the bio. Signed-off-by: Neil Brown <neilb@suse.de> diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-14shared tag queue barrier commentNick Piggin
Should add some comments for the tag barriers (they won't be so important if we can switch over to the explicit _lock bitops, but for now we should make it clear). Jens' original patch said a barrier after the test_and_clear_bit was also required. I can't see why (and it would prevent the use of the _lock bitop). Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> --
2007-09-13Fix race with shared tag queue mapsJens Axboe
There's a race condition in blk_queue_end_tag() for shared tag maps, users include stex (promise supertrak thingy) and qla2xxx. The former at least has reported bugs in this area, not sure why we haven't seen any for the latter. It could be because the window is narrow and that other conditions in the qla2xxx code hide this. It's a real bug, though, as the stex smp users can attest. We need to ensure two things - the tag bit clearing needs to happen AFTER we cleared the tag pointer, as the tag bit clearing/setting is what protects this map. Secondly, we need to ensure that the visibility of the tag pointer and tag bit clear are ordered properly. [ I removed the SMP barriers - "test_and_clear_bit()" already implies all the required barriers. -- Linus ] Also see http://bugzilla.kernel.org/show_bug.cgi?id=7842 Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11Fix remap handling by blktraceAlan D. Brunelle
This patch provides more information concerning REMAP operations on block IOs. The additional information provides clearer details at the user level, and supports post-processing analysis in btt. o Adds in partition remaps on the same device. o Fixed up the remap information in DM to be in the right order o Sent up mapped-from and mapped-to device information Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-17Slab allocators: Replace explicit zeroing with __GFP_ZEROChristoph Lameter
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing variant in the past. But with __GFP_ZERO it is possible now to do zeroing while allocating. Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever we can. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16add a struct request pointer to the request structureFUJITA Tomonori
This adds a struct request pointer to the request structure for the second data phase (bidi for now). A request queue supporting bidi requests sets QUEUE_FLAG_BIDI. This prevents sending bidi requests to a non-bidi queue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bind bsg to all SCSI devicesFUJITA Tomonori
This patch binds bsg to all SCSI devices (their request queues) like the current sg driver does. We can send SCSI commands to non disk and cdrom scsi devices like OSD via bsg. This patch removes bsg_register_queue from blk_register_queue so bsg devices aren't bound to non SCSI block devices. If they want bsg, I'll send a patch to do that. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: bind bsg to request_queue instead of gendiskFUJITA Tomonori
This patch binds bsg devices to request_queue instead of gendisk. Any objects (like transport entities) can define own request_handler and create own bsg device. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: support for full generic block layer SG v3Jens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endioTejun Heo
Barrier bios are completed twice - once after the barrier write itself is done and again after the whole sequence is complete. flush_dry_bio_endio() is for the first completion. It doesn't really complete the bio. It rewinds bvec and resets bio so that it can be completed again when the whole barrier sequence is complete. The bvec rewinding code has the following problems. 1. The rewinding code is wrong because filesystems may pass bvec with non zero bv_offset. 2. The block layer doesn't guarantee anything about the state of bvec array on request completion. bv_offset and len are updated iff __end_that_request_first() completes the bvec partially. Because of #2, #1 doesn't really matter (nobody cares whether bvec is re-wound correctly or not) but then again by not doing unwinding at all, we'll always give back the same bvec to the caller as full bvec completion doesn't alter bvecs and the final completion is always full completion. Drop unnecessary rewinding code. This is spotted by Neil Brown. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10blk_hw_contig_segment(): bad segment size checksJens Axboe
Two bugs in there: - The virt oversize check should use the current bio hardware back size and the next bio front size, not the same bio. Spotted by Neil Brown. - The segment size check should add hw front sizes, not total bio sizes. Spotted by James Bottomley Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-06-15block: always requeue !fs requests at the frontTejun Heo
SCSI marks internal commands with REQ_PREEMPT and push it at the front of the request queue using blk_execute_rq(). When entering suspended or frozen state, SCSI devices are quiesced using scsi_device_quiesce(). In quiesced state, only REQ_PREEMPT requests are processed. This is how SCSI blocks other requests out while suspending and resuming. As all internal commands are pushed at the front of the queue, this usually works. Unfortunately, this interacts badly with ordered requeueing. To preserve request order on requeueing (due to busy device, active EH or other failures), requests are sorted according to ordered sequence on requeue if IO barrier is in progress. The following sequence deadlocks. 1. IO barrier sequence issues. 2. Suspend requested. Queue is quiesced with part or all of IO barrier sequence at the front. 3. During suspending or resuming, SCSI issues internal command which gets deferred and requeued for some reason. As the command is issued after the IO barrier in #1, ordered requeueing code puts the request after IO barrier sequence. 4. The device is ready to process requests again but still is in quiesced state and the first request of the queue isn't REQ_PREEMPT, so command processing is deadlocked - suspending/resuming waits for the issued request to complete while the request can't be processed till device is put back into running state by resuming. This can be fixed by always putting !fs requests at the front when requeueing. The following thread reports this deadlock. http://thread.gmane.org/gmane.linux.kernel/537473 Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: David Greaves <david@dgreaves.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15ll_rw_blk: fix gcc 4.2 warning on current_io_context()Jens Axboe
current_io_context() is both static and exported with EXPORT_SYMBOL(). As there are no users outside of ll_rw_blk.c itself, just kill the export. Problem reported by Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11When stacked block devices are in-use (e.g. md or dm), the recursive callsNeil Brown
to generic_make_request can use up a lot of space, and we would rather they didn't. As generic_make_request is a void function, and as it is generally not expected that it will have any effect immediately, it is safe to delay any call to generic_make_request until there is sufficient stack space available. As ->bi_next is reserved for the driver to use, it can have no valid value when generic_make_request is called, and as __make_request implicitly assumes it will be NULL (ELEVATOR_BACK_MERGE fork of switch) we can be certain that all callers set it to NULL. We can therefore safely use bi_next to link pending requests together, providing we clear it before making the real call. So, we choose to allow each thread to only be active in one generic_make_request at a time. If a subsequent (recursive) call is made, the bio is linked into a per-thread list, and is handled when the active call completes. As the list of pending bios is per-thread, there are no locking issues to worry about. I say above that it is "safe to delay any call...". There are, however, some behaviours of a make_request_fn which would make it unsafe. These include any behaviour that assumes anything will have changed after a recursive call to generic_make_request. These could include: - waiting for that call to finish and call it's bi_end_io function. md use to sometimes do this (marking the superblock dirty before completing a write) but doesn't any more - inspecting the bio for fields that generic_make_request might change, such as bi_sector or bi_bdev. It is hard to see a good reason for this, and I don't think anyone actually does it. - inspecing the queue to see if, e.g. it is 'full' yet. Again, I think this is very unlikely to be useful, or to be done. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: <dm-devel@redhat.com> Alasdair G Kergon <agk@redhat.com> said: I can see nothing wrong with this in principle. For device-mapper at the moment though it's essential that, while the bio mappings may now get delayed, they still get processed in exactly the same order as they were passed to generic_make_request(). My main concern is whether the timing changes implicit in this patch will make the rare data-corrupting races in the existing snapshot code more likely. (I'm working on a fix for these races, but the unfinished patch is already several hundred lines long.) It would be helpful if some people on this mailing list would test this patch in various scenarios and report back. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) sound: convert "sound" subdirectory to UTF-8 MAINTAINERS: Add cxacru website/mailing list include files: convert "include" subdirectory to UTF-8 general: convert "kernel" subdirectory to UTF-8 documentation: convert the Documentation directory to UTF-8 Convert the toplevel files CREDITS and MAINTAINERS to UTF-8. remove broken URLs from net drivers' output Magic number prefix consistency change to Documentation/magic-number.txt trivial: s/i_sem /i_mutex/ fix file specification in comments drivers/base/platform.c: fix small typo in doc misc doc and kconfig typos Remove obsolete fat_cvf help text Fix occurrences of "the the " Fix minor typoes in kernel/module.c Kconfig: Remove reference to external mqueue library Kconfig: A couple of grammatical fixes in arch/i386/Kconfig Correct comments in genrtc.c to refer to correct /proc file. Fix more "deprecated" spellos. Fix "deprecated" typoes. ... Fix trivial comment conflict in kernel/relay.c.
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09unify flush_work/flush_work_keventd and rename it to cancel_work_syncOleg Nesterov
flush_work(wq, work) doesn't need the first parameter, we can use cwq->wq (this was possible from the very beginnig, I missed this). So we can unify flush_work_keventd and flush_work. Also, rename flush_work() to cancel_work_sync() and fix all callers. Perhaps this is not the best name, but "flush_work" is really bad. (akpm: this is why the earlier patches bypassed maintainers) Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Auke Kok <auke-jan.h.kok@intel.com>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09kblockd: use flush_workAndrew Morton
Switch the kblockd flushing from a global flush to a more specific flush_work(). (akpm: bypassed maintainers, sorry. There are other patches which depend on this) Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <axboe@suse.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08[PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()Mike Christie
I think we might just need the blk_map_kern users now. For the async execute I added the bounce code already and the block SG_IO has it atleady. I think the blk_map_kern bounce code got dropped because we thought the correct gfp_t would be passed in. But I think all we need is the patch below and all the paths are take care of. The patch is not tested. Patch was made against scsi-misc. The last place that is sending non sg commands may just be md/dm-emc.c but that is is just waiting on alasdair to take some patches that fix that and a bunch of junk in there including adding bounce support. If the patch below is ok though and dm-emc finally gets converted then it will have sg and bonce buffer support. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits) [SCSI] fusion: fix domain validation loops [SCSI] qla2xxx: fix regression on sparc64 [SCSI] modalias for scsi devices [SCSI] sg: cap reserved_size values at max_sectors [SCSI] BusLogic: stop using check_region [SCSI] tgt: fix rdma transfer bugs [SCSI] aacraid: fix aacraid not finding device [SCSI] aacraid: Correct SMC products in aacraid.txt [SCSI] scsi_error.c: Add EH Start Unit retry [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test. [SCSI] ipr: Driver version to 2.3.2 [SCSI] ipr: Faster sg list fetch [SCSI] ipr: Return better qc_issue errors [SCSI] ipr: Disrupt device error [SCSI] ipr: Improve async error logging level control [SCSI] ipr: PCI unblock config access fix [SCSI] ipr: Fix for oops following SATA request sense [SCSI] ipr: Log error for SAS dual path switch [SCSI] ipr: Enable logging of debug error data for all devices [SCSI] ipr: Add new PCI-E IDs to device table ...
2007-04-30ll_rw_blk: add io_context private pointerJens Axboe
To be used by as/cfq as they see fit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-17[SCSI] sg: cap reserved_size values at max_sectorsAlan Stern
This patch (as857) modifies the SG_GET_RESERVED_SIZE and SG_SET_RESERVED_SIZE ioctls in the sg driver, capping the values at the device's request_queue's max_sectors value. This will permit cdrecord to obtain a legal value for the maximum transfer length, fixing Bugzilla #7026. The patch also caps the initial reserved_size value. There's no reason to have a reserved buffer larger than max_sectors, since it would be impossible to use the extra space. The corresponding ioctls in the block layer are modified similarly, and the initial value for the reserved_size is set as large as possible. This will effectively make it default to max_sectors. Note that the actual value is meaningless anyway, since block devices don't have a reserved buffer. Finally, the BLKSECTGET ioctl is added to sg, so that there will be a uniform way for users to determine the actual max_sectors value for any raw SCSI transport. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-27block: blk_max_pfn is somtimes wrongVasily Tarasov
There is a small problem in handling page bounce. At the moment blk_max_pfn equals max_pfn, which is in fact not maximum possible _number_ of a page frame, but the _amount_ of page frames. For example for the 32bit x86 node with 4Gb RAM, max_pfn = 0x100000, but not 0xFFFF. request_queue structure has a member q->bounce_pfn and queue needs bounce pages for the pages _above_ this limit. This routine is handled by blk_queue_bounce(), where the following check is produced: if (q->bounce_pfn >= blk_max_pfn) return; Assume, that a driver has set q->bounce_pfn to 0xFFFF, but blk_max_pfn equals 0x10000. In such situation the check above fails and for each bio we always fall down for iterating over pages tied to the bio. I want to notice, that for quite a big range of device drivers (ide, md, ...) such problem doesn't happen because they use BLK_BOUNCE_ANY for bounce_pfn. BLK_BOUNCE_ANY is defined as blk_max_pfn << PAGE_SHIFT, and then the check above doesn't fail. But for other drivers, which obtain reuired value from drivers, it fails. For example sata_nv uses ATA_DMA_MASK or dev->dma_mask. I propose to use (max_pfn - 1) for blk_max_pfn. And the same for blk_max_low_pfn. The patch also cleanses some checks related with bounce_pfn. Signed-off-by: Vasily Tarasov <vtaras@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-09[PATCH] md: fix various bugs with aligned reads in RAID5Neil Brown
It is possible for raid5 to be sent a bio that is too big for an underlying device. So if it is a READ that we pass stright down to a device, it will fail and confuse RAID5. So in 'chunk_aligned_read' we check that the bio fits within the parameters for the target device and if it doesn't fit, fall back on reading through the stripe cache and making lots of one-page requests. Note that this is the earliest time we can check against the device because earlier we don't have a lock on the device, so it could change underneath us. Also, the code for handling a retry through the cache when a read fails has not been tested and was badly broken. This patch fixes that code. Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Kai" <epimetreus@fastmail.fm> Cc: <stable@suse.de> Cc: <org@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>