aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/acpi_memhotplug.c
AgeCommit message (Collapse)Author
2007-07-23ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI ↵Thomas Renninger
drivers modpost is going to use these to create e.g. acpi:ACPI0001 in modules.alias. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25ACPI: Remove duplicate definitions for _STA bitsBjorn Helgaas
No need to duplicate the existing definitions in include/acpi/actypes.h. syntax only -- no functional change. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: delete extra #defines in /drivers/acpi/ driversLen Brown
Cosmetic only. Except in a single case, #define ACPI_*_DRIVER_NAME were invoked 0 or 1 times. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: fix acpi_driver.name usageLen Brown
It was erroneously used as a description rather than a name. ie. turn this: lenb@se7525gp2:/sys> ls bus/acpi/drivers ACPI AC Adapter Driver ACPI Embedded Controller Driver ACPI Power Resource Driver ACPI Battery Driver ACPI Fan Driver ACPI Processor Driver ACPI Button Driver ACPI PCI Interrupt Link Driver ACPI Thermal Zone Driver ACPI container driver ACPI PCI Root Bridge Driver hpet into this: lenb@se7525gp2:~> ls /sys/bus/acpi/drivers ac battery button container ec fan hpet pci_link pci_root power processor thermal Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-16Pull style into test branchLen Brown
Conflicts: drivers/acpi/button.c drivers/acpi/ec.c drivers/acpi/osl.c drivers/acpi/sbs.c
2006-10-20[PATCH] acpi memory hotplug: remove strange add_memory fail messageYasunori Goto
I wrote a patch to avoid redundant memory hot-add call at boot time. This was cause of strange fail message of memory hotplug like "ACPI: add_memory failed". Memory is recognized by early boot code with EFI/E820. But, if DSDT describes memory devices for them, then hot-add code is called for already recognized memory, and it shows fail messages with -EEXIST. So, sys admin will misunderstand this message as something wrong by it. This patch avoids them by preventing redundant hot-add call until completion of driver initialization. [akpm@osdl.org: cleanups] Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[PATCH] Change log level of a message of acpi_memhotplug to KERN_DEBUGYasunori Goto
I suppose this message seems quite useless except debugging. It just shows "Hotplug Mem Device". System admin can't know anything by this message. So, I would like to change it to KERN_DEBUG. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-01[PATCH] hot-add-mem x86_64: memory_add_physaddr_to_nid node fixupKeith Mannthey
In cases where the acpi memory-add event does not containe the pxm (node) infomation allow the driver to look up node info based on the address. The acpi_get_node call returns -1 if it can't decode the pxm info, this causes add_memory to panic. acpi_get_node would have to decode the resource from the handle (a lenghty proposition). This seems to be the cleanist point to interject the hook. [kamezawa.hiroyu@jp.fujitsu.com: build fixes] [y-goto@jp.fujitsu.com: build fixes] Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-16ACPI: memory hotplug: remove useless message at boot timeYasunori Goto
This is to remove noisy useless message at boot. The message is a ton of "ACPI Exception (acpi_memory-0492): AE_ERROR, handle is no memory device" In my emulation, number of memory devices are not so many (only 6), but, this messages are displayed 114 times. It is showed by acpi_memory_register_notify_handler() which is called by acpi_walk_namespace(). acpi_walk_namespace() parses all of ACPI's namespace and execute acpi_memory_register_notify_handler(). So, it is called for all of the device which is defined in namespace. If the parsing device is not memory, acpi_memhotplug ignores it due to "no match" and will parse next device. This is normal route, not an exception. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-06[PATCH] memory hotadd fixes: avoid registering res twiceKAMEZAWA Hiroyuki
both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate _CRS method. We should avoid evaluate device's resource twice if we could get it successfully in past. Signed-off-by: KAMEZWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: avoid check in acpiKAMEZAWA Hiroyuki
add_memory() does all necessary check to avoid collision. then, acpi layer doesn't have to check region by itself. (*) pfn_valid() just returns page struct is valid or not. It returns 0 if a section has been already added even is ioresource is not added. ioresource collision check in mm/memory_hotplug.c can do more precise collistion check. added enabled bit check just for sanity check.. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01Pull acpi_device_handle_cleanup into release branchLen Brown
2006-07-01Pull acpi_os_free into release branchLen Brown
2006-06-30ACPI: fixup memhotplug debug messageakpm@osdl.org
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: delete acpi_os_free(), use kfree() directlyLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: acpi_memhotplug: Remove unneeded acpi_handle from driver.Patrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: acpi_memhotplug: Use acpi_device's handle instead of driver'sPatrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: acpi_memhotplug: add struct acpi_device to struct acpi_memory_device.Patrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-29merge linus into release branchLen Brown
Conflicts: drivers/acpi/acpi_memhotplug.c
2006-06-27[PATCH] pgdat allocation for new node add (get node id by acpi)Yasunori Goto
This is to find node id from acpi's handle of memory_device in DSDT. _PXM for the new node can be found by acpi_get_pxm() by using new memory's handle. So, node id can be found by pxm_to_nid_map[]. This patch becomes simpler than v2 of node hot-add patch. Because old add_memory() function doesn't have node id parameter. So, kernel must find its handle by physical address via DSDT again. But, v3 just give node id to add_memory() now. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] pgdat allocation for new node add (specify node id)Yasunori Goto
Change the name of old add_memory() to arch_add_memory. And use node id to get pgdat for the node at NODE_DATA(). Note: Powerpc's old add_memory() is defined as __devinit. However, add_memory() is usually called only after bootup. I suppose it may be redundant. But, I'm not well known about powerpc. So, I keep it. (But, __meminit is better at least.) Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Catch notification of memory add event of ACPI via container driver. ↵Yasunori Goto
(avoid redundant call add_memory) When acpi_memory_device_init() is called at boottime to register struct memory acpi_memory_device, acpi_bus_add() are called via acpi_driver_attach(). But it also calls ops->start() function. It is called even if the memory blocks are initialized at early boottime. In this case add_memory() return -EEXIST, and the memory blocks becomes INVALID state even if it is normal. This is patch to avoid calling add_memory() for already available memory. [akpm@osdl.org: coding cleanups] Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Catch notification of memory add event of ACPI via container driver. ↵Yasunori Goto
(register start func for memory device) This is a patch to call add_memroy() when notify reaches for new node's add event. When new node is added, notify of ACPI reaches container device which means the node. Container device driver calls acpi_bus_scan() to find and add belonging devices (which means cpu, memory and so on). Its function calls add and start function of belonging devices's driver. Howevever, current memory hotplug driver just register add function to create sysfs file for its memory. But, acpi_memory_enable_device() is not called because it is considered just the case that notify reaches memory device directly. So, if notify reaches container device nothing can call add_memory(). This is a patch to create start function which calls add_memory(). add_memory() can be called by this when notify reaches container device. [akpm@osdl.org: coding cleanups] Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] acpi memory hotplug cannot manage _CRS with plural resourecesKAMEZAWA Hiroyuki
Current acpi memory hotplug just looks into the first entry of resources in _CRS. But, _CRS can contain plural resources. So, if _CRS contains plural resoureces, acpi memory hot add cannot add all memory. With this patch, acpi memory hotplug can deal with Memory Device, whose _CRS contains plural resources. Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha version firmware which supports dynamic reconfiguration of NUMA.) Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be divided into small (<4G) resources. looks crazy, but not invalid. (See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx) For this reason, a firmware vendor who supports Windows writes plural resources in a _CRS even if they are contiguous. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUGThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-01ACPI: fix memory hotplug range length handlingBjorn Helgaas
Address space descriptors contain _MIN, _MAX, and _LEN. _MIN and _MAX are the bounds within which the region can be moved (this is clarified in Table 6-38 of the ACPI 3.0 spec). We should use _LEN to determine the size of the region, not _MAX - _MIN + 1. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-07[ACPI] acpi_memhotplug.c build fixKAMEZAWA Hiroyuki
drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_get_device_resources': drivers/acpi/acpi_memhotplug.c:101: error: structure has no member named `attribute' drivers/acpi/acpi_memhotplug.c:103: error: structure has no member named `attribute' drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_disable_device': drivers/acpi/acpi_memhotplug.c:253: warning: unused variable `attr' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10[ACPI] ACPICA 20050930Bob Moore
Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-29[PATCH] memory hotplug: move section_mem_map alloc to sparse.cDave Hansen
This basically keeps up from having to extern __kmalloc_section_memmap(). The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that header gets hard to work with, because it needs some arch-specific macros. Just stick it in here for now, instead of creating another header. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Lion Vollnhals <webmaster@schiggl.de> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05[ACPI] Lindent all ACPI filesLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!