aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/bus.c
AgeCommit message (Collapse)Author
2009-06-18ACPI: use handle, not device, in system notification pathBjorn Helgaas
This patch changes the global system notification path so it uses the acpi_handle, not the acpi_device. System notifications often deal with device presence and status change. In these cases, we may not have an acpi_device. For example, we may get a Device Check notification on an object that previously was not present. Since the object was not present, we would not have had an acpi_device for it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: remove unused return values from Bus Check & Device Check handlingBjorn Helgaas
Remove return values from acpi_bus_check_device() and acpi_bus_check_scope() since nobody looks at them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: remove unused "status_changed" return value from Check Device handlingBjorn Helgaas
Remove "status_changed" return from acpi_bus_check_device(). Nobody does anything useful based on its value. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: simplify notification debug messagesBjorn Helgaas
This replaces several messages that depend on the acpi_device struct with a single message that uses just the acpi_handle. We should be able to deal with notifications to objects that do not yet have an acpi_device struct. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: allow drivers to request both device and system notify eventsBjorn Helgaas
System notify events (0x00-0x7f) are common across all device types and should be handled in Linux/ACPI, not in drivers. However, some BIOSes use system notify events in device-specific ways that require the driver to be involved. This patch adds a ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag. When a driver sets this flag and supplies a .notify method, Linux/ACPI calls the .notify method for ALL notify events on the device, not just the device-specific (0x80-0xff) events. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-08ACPI: power: update error messageLen Brown
"Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'bjorn-initcall-cleanup' into releaseLen Brown
2009-03-27ACPI: call acpi_wakeup_device_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_wakeup_device_init() directly. Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7). acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which is populated when ACPI devices are enumerated by acpi_init() -> acpi_scan_init(). Using late_initcall is certainly enough to make sure acpi_wakeup_device_list is populated, but it is more than necessary. We can just as easily call acpi_wakeup_device_init() directly from acpi_init(), which avoids the initcall magic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_sleep_proc_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_sleep_proc_init() directly. Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7), apparently to make sure that the /proc hierarchy already exists: 2003/02/13 12:38:03-06:00 mochel acpi sleep: demote sleep proc file creation. - Make acpi_sleep_proc_init() a late_initcall(), and not called from acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at least there when we create the dang file. This should no longer be an issue because acpi_bus_init() (called early in acpi_init()) creates acpi_root_dir (/proc/acpi). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call init_acpi_device_notify() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call init_acpi_device_notify() directly. Previously, init_acpi_device_notify() was an arch_initcall (sequence 3), so it was called before acpi_init() (a subsys_initcall at sequence 4). init_acpi_device_notify() sets the platform_notify and platform_notify_remove function pointers. These pointers are not used until acpi_init() enumerates ACPI devices in this path: acpi_init() acpi_scan_init() acpi_bus_scan() acpi_add_single_object() acpi_device_register() device_add() <use platform_notify> So it is sufficient to have acpi_init() call init_acpi_device_notify() directly before it enumerates devices. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_debug_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_debug_init() directly. Previously, both were subsys_initcalls. acpi_debug_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_system_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_system_init() directly. Previously, both were subsys_initcalls. acpi_system_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_power_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_power_init() directly. Previously, both were subsys_initcalls. acpi_power_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_ec_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_ec_init() directly. Previously, both were subsys_initcalls. acpi_ec_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_scan_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_scan_init() directly. Previously, both acpi_init() and acpi_scan_init() were subsys_initcalls, and acpi_init() was called first based on the link order from the makefile (bus.o before scan.o). acpi_scan_init() registers the ACPI bus type, creates the root device, and enumerates fixed-feature and namespace devices. All of this must be done after acpi_init(), and it's better to call acpi_scan_init() explicitly rather than rely on the link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: skip DMI power state check when ACPI disabledBjorn Helgaas
This patch makes acpi_init() exit early when ACPI is disabled. This skips a DMI check that affects ACPI power management. The DMI check prints a notice that is misleading when ACPI is disabled. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17ACPI: move private declarations to internal.hBjorn Helgaas
A number of things that shouldn't be exposed outside the ACPI core were declared in include/acpi/acpi_drivers.h, where anybody can see them. This patch moves those declarations to a new "internal.h" inside drivers/acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16ACPI: remove doubled status checkingJiri Slaby
There was a misplaced status test (two consequent tests without a statement in between) in acpi_bus_init for ages. Remove it, since the function which should be checked (acpi_os_initialize1) has BUG_ONs on failure paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19ACPI: fix 2.6.28 acpi.debug_level regressionBjorn Helgaas
acpi_early_init() was changed to over-write the cmdline param, making it really inconvenient to set debug flags at boot-time. Also, This sets the default level to "info", which is what all the ACPI drivers use. So to enable messages from drivers, you only have to supply the "layer" (a.k.a. "component"). For non-"info" ACPI core and ACPI interpreter messages, you have to supply both level and layer masks, as before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: turn off all debug output by defaultBjorn Helgaas
When CONFIG_ACPI_DEBUG=y, the default acpi_dbg_layer and acpi_dbg_level values built into the ACPI CA have some debug output enabled. We'd rather be quiet unless the user actually specified the acpi.debug_level argument. This enables distros to ship with CONFIG_ACPI_DEBUG=y without inundating users with debug output. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_ECBjorn Helgaas
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ull' into testLen Brown
Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ec' into testLen Brown
2008-10-22Merge branch 'dock' into testLen Brown
Conflicts: drivers/acpi/osl.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22ACPI : Load device driver according to the status of acpi deviceZhao Yakui
According to ACPI spec when the status of some device is not present but functional, the device is valid and the children of this device should be enumerated. It means that the device should be added to linux acpi device tree. But the device driver for this device should not be loaded. The detailed info can be found in the section 6.3.7 of ACPI 3.0b spec. _STA may return bit 0 clear (not present) with bit 3 set (device is functional). This case is used to indicate a valid device for which no device driver should be loaded (for example, a bridge device.). Children of this device may be present and valid. OS should continue enumeration below a device whose _STA returns this bit combination http://bugzilla.kernel.org/show_bug.cgi?id=3358 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22ACPI: Add DMI check to disable power state check in power transitionZhao Yakui
Add the DMI check to disable power check in the course of device power transistion. http://bugzilla.kernel.org/show_bug.cgi?id=11000 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22ACPI: Add "acpi.power_nocheck=1" to disable power state check in power ↵Zhao Yakui
transition Maybe the incorrect power state is returned on the bogus bios, which is different with the real power state. For example: the bios returns D0 state and the real power state is D3. OS expects to set the device to D0 state. In such case if OS uses the power state returned by the BIOS and checks the device power state very strictly in power transition, the device can't be transited to the correct power state. So the boot option of "acpi.power_nocheck=1" is added to avoid checking the device power in the course of device power transition. http://bugzilla.kernel.org/show_bug.cgi?id=8049 http://bugzilla.kernel.org/show_bug.cgi?id=11000 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Enable EC device immediately after ACPI full initializationZhao Yakui
when there is no ECDT table and no _INI object for EC device, it will be enabled before scanning ACPI device. But it is too late after the following the commit is merged. >commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e > Author: Robert Hancock <hancockr@shaw.ca> > Date: Fri Feb 15 01:27:20 2008 -0800 >x86: validate against acpi motherboard resources After the above commit is merged, OS will check whether MCFG area is reserved in ACPI motherboard resources by calling the function of acpi_get_devices when there exists MCFG table. In the acpi_get_devices the _STA object will be evaluated to check the status of the ACPI device. On some broken BIOS the MYEC object of EC device is initialized as one, which indicates that EC operation region is already accessible before enabling EC device.So on these broken BIOS the EC operation region will be accessed in course of evaluating the _STA object before enabling EC device, which causes that OS will print the following warning messages: >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff88007f8145e8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20080321] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG. EC__.BAT1._STA] (Node ffff81013fc17a00), AE_NOT_EXIST >ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1. _STA] (Node ffff81013fc17a00), AE_NOT_EXIST Although the above warning message is harmless, it looks confusing. So it is necessary to enable EC device as early as possible.Maybe it is appropriate to enable it immediately after ACPI full initialization. http://bugzilla.kernel.org/show_bug.cgi?id=11255 http://bugzilla.kernel.org/show_bug.cgi?id=11374 http://bugzilla.kernel.org/show_bug.cgi?id=11660 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-23ACPI: introduce notifier change to avoid duplicatesShaohua Li
The battery driver already registers notification handler. To avoid registering notification handler again, introduce a notifier chain in global system notifier handler and use it in dock driver. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16ACPICA: Eliminate acpi_native_uint type v2Bob Moore
No longer needed; replaced mostly with u32, but also acpi_size where a type that changes 32/64 bit on 32/64-bit platforms is required. v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning. from David Howells Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-07PCI ACPI: Rework PCI handling of wake-upRafael J. Wysocki
* Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07ACPI: Introduce acpi_bus_power_manageable functionRafael J. Wysocki
Introduce function acpi_bus_power_manageable() allowing other (dependent) subsystems to check if ACPI is able to power manage given device. This may be useful, for example, for PCI device power management. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-26x86: validate against acpi motherboard resourcesRobert Hancock
This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-15acpi: bus: check once more for an empty list after locking itChuck Ebbert
List could have become empty after the unlocked check that was made earlier, so check again inside the lock. Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765 Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Cc: <stable@kernel.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-11ACPI: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09x86: fix sparse warnings in acpi/bus.cHarvey Harrison
Add function definition and extern variables to asm-x86/acpi.h. All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are only added to the x86 include headers. boot.c already includes acpi.h so no changes are needed there. Fixes the following: arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-07Merge branches 'release' and 'fluff' into releaseLen Brown
Conflicts: drivers/acpi/scan.c include/linux/acpi.h Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: misc cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01ACPI: attach thermal zone infoZhang Rui
Intel menlow driver needs to get the pointer of themal_zone_device structure of an ACPI thermal zone. Attach this to each ACPI thermal zone device object. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Thomas Sujith <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-24firmware: change firmware_kset to firmware_kobjGreg Kroah-Hartman
There is no firmware "subsystem" it's just a directory in /sys that other portions of the kernel want to hook into. So make it a kobject not a kset to help alivate anyone who tries to do some odd kset-like things with this. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: convert /sys/firmware/acpi/ to use kobject_createGreg Kroah-Hartman
We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: remove struct kobj_type from struct ksetGreg Kroah-Hartman
We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young <hidave.darkstar@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11PM: ACPI and APM must not be enabled at the same timeLen Brown
ACPI and APM used "pm_active" to guarantee that they would not be simultaneously active. But pm_active was recently moved under CONFIG_PM_LEGACY, so that without CONFIG_PM_LEGACY, pm_active became a NOP -- allowing ACPI and APM to both be simultaneously enabled. This caused unpredictable results, including boot hangs. Further, the code under CONFIG_PM_LEGACY is scheduled for removal. So replace pm_active with pm_flags. pm_flags depends only on CONFIG_PM, which is present for both CONFIG_APM and CONFIG_ACPI. http://bugzilla.kernel.org/show_bug.cgi?id=9194 Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2007-10-25ACPI: Fan: Drop force_power_state acpi_device optionAlexey Starikovskiy
force_power_state was used as a workaround for invalid cached power state of the device. We do not cache power state, so no need for workaround. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25ACPI: power: don't cache power resource stateAlexey Starikovskiy
ACPI may change power resource state behind our back, so don't keep our local copy, which may not be valid. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-19Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (41 commits) ACPICA: hw: Don't carry spinlock over suspend ACPICA: hw: remove use_lock flag from acpi_hw_register_{read, write} ACPI: cpuidle: port idle timer suspend/resume workaround to cpuidle ACPI: clean up acpi_enter_sleep_state_prep Hibernation: Make sure that ACPI is enabled in acpi_hibernation_finish ACPI: suppress uninitialized var warning cpuidle: consolidate 2.6.22 cpuidle branch into one patch ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfs ACPI: AC: Add sysfs interface ACPI: SBS: Add sysfs alarm ACPI: SBS: Add ACPI_PROCFS around procfs handling code. ACPI: SBS: Add support for power_supply class (and sysfs) ACPI: SBS: Make SBS reads table-driven. ACPI: SBS: Simplify data structures in SBS ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002) ACPI: EC: Add new query handler to list head. ACPI: Add acpi_bus_generate_event4() function ACPI: Battery: add sysfs alarm ACPI: Battery: Add sysfs support ACPI: Battery: Misc clean-ups, no functional changes ... Fix up conflicts in drivers/misc/thinkpad_acpi.[ch] manually
2007-10-12kobjects: fix up improper use of the kobject name fieldGreg Kroah-Hartman
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.