aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/osl.c
AgeCommit message (Collapse)Author
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-02ACPI: fix acpi_osi=!LinuxLen Brown
Need to check for special case "acpi_osi=!Linux" before handling the general case "acpi_osi=!*", or it will have no effect. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30ACPI: add __init to acpi_initialize_subsystem()Len Brown
Add __init to: acpi_initialize_subsystem() (and un-export it) acpi_os_initialize() Add __initdata to: acpi_osl_dmi_table[] Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-30ACPI: Make _OSI(Linux) a special caseLen Brown
_OSI("Linux") is like _OS("Linux"), it is ill-defined and virtually no BIOS vendors test interaction with it. As a result, it can do more damage than good because it causes the BIOS to follow un-tested paths. Recently, several machines have turned up that erroneously test this string in a way which causes them to _not_ test other compatibility strings, including the ZI9 and Toshiba. So it appears that this bad code has made it into a BIOS vendor's reference BIOS. Linux has no choice but to stop advertising compatibility with _OSI string "Linux" - as there are an unbounded number of possible incompatibilities going forward. But some BIOSes have already shipped which do use it for things like conditionally re-enabling video on resume from S3. (Too bad they didn't do that unconditionally) Add special case code for _OSI(Linux) Squawk to dmesg if _OSI(Linux) is requested Add DMI list both to enable and disable _OSI(Linux) But for now, keep the default enabled via #define OSI_LINUX_ENABLED. http://bugzilla.kernel.org/show_bug.cgi?id=7787 Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-29ACPI: extend "acpi_osi=" boot optionLen Brown
The boot option "acpi_osi=" has always disabled Linux _OSI support, thus disabling all OS Interface strings which are advertised by Linux to the BIOS. Now... acpi_osi="string" adds the interface string, and acpi_osi="!string" invalidates the pre-defined interface string eg. acpi_osi="!Windows 2006" would disable Linux's claim of Vista compatibility. Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09ACPI: created a dedicated workqueue for notify() executionAlexey Starikovskiy
HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16Pull remove-hotkey into release branchLen Brown
2007-02-16Pull fluff into release branchLen Brown
Conflicts: arch/x86_64/pci/mmconfig.c drivers/acpi/bay.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16ACPI: hotkey: remove driver, per feature-removal-schedule.txtLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-15ACPI: remove acpi_os_readable(), acpi_os_writable()Len Brown
...which are now unused Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-15ACPI: Fix sparse warningsRandy Dunlap
Use NULL for pointers drivers/acpi/osl.c:208:10: warning: Using plain integer as NULL pointer drivers/acpi/tables/tbxface.c:411:49: warning: Using plain integer as NULL pointer drivers/acpi/processor_core.c:1008:10: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-03Pull motherboard into test branchLen Brown
Conflicts: drivers/acpi/motherboard.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-02ACPICA: use new ACPI headers.Alexey Starikovskiy
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-02ACPICA: minimal patch to integrate new tables into LinuxAlexey Starikovskiy
Signed-off-by: Len Brown <len.brown@intel.com>
2007-01-26ACPI: move FADT resource reservations from motherboard driver to oslBjorn Helgaas
Resources described by the FADT aren't really a good fit for the ACPI motherboard driver. The motherboard driver cares about PNP0C01 and PNP0C02 devices and their resources. The FADT describes some resources used by the ACPI core. Often, they are also described by by the _CRS of a motherboard device, but I think it's better to reserve them specifically in the ACPI osl.c because (a) the motherboard driver is optional and ACPI uses the resources even if the driver is absent, and (b) I want to remove the ACPI motherboard driver because it's mostly redundant with the PNP system.c driver. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20Pull bugfix into test branchLen Brown
2006-12-20ACPI: fix NULL check in drivers/acpi/osl.cAdrian Bunk
Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-16Pull style into test branchLen Brown
Conflicts: drivers/acpi/button.c drivers/acpi/ec.c drivers/acpi/osl.c drivers/acpi/sbs.c
2006-11-22WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells
Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-17Revert "ACPI: created a dedicated workqueue for notify() execution"Linus Torvalds
This reverts commit 37605a6900f6b4d886d995751fcfeef88c4e462c. Again. This same bug has now been introduced twice: it was done earlier by commit b8d35192c55fb055792ff0641408eaaec7c88988, only to be reverted last time in commit 72945b2b90a5554975b8f72673ab7139d232a121. We must NOT try to queue up notify handlers to another thread than the normal ACPI execution thread, because the notifications on some systems seem to just keep on accumulating until we run out of memory and/or threads. Keeping events within the one deferred execution thread automatically throttles the events properly. At least the Compaq N620c will lock up completely on the first thermal event without this patch reverted. Cc: David Brownell <david-b@pacbell.net> Cc: Len Brown <len.brown@intel.com> Cc: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: created a dedicated workqueue for notify() executionAlexey Y. Starikovskiy
http://bugzilla.kernel.org/show_bug.cgi?id=5534#c160 Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-27[PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-16ACPI: avoid irqrouter_resume might_sleep oops on resume from S4Len Brown
__might_sleep+0x8e/0x93 acpi_os_wait_semaphore+0x50/0xa3 acpi_ut_acquire_mutex+0x28/0x6a acpi_ns_get_node+0x46/0x88 acpi_ns_evaluate+0x2d/0xfc acpi_rs_set_srs_method_data+0xc5/0xe1 acpi_set_current_resources+0x31/0x3f acpi_pci_link_set+0xfc/0x1a5 irqrouter_resume+0x48/0x5f and __might_sleep+0x8e/0x93 kmem_cache_alloc+0x2a/0x8f acpi_evaluate_integer+0x32/0x96 acpi_bus_get_status+0x30/0x84 acpi_pci_link_set+0x12a/0x1a5 irqrouter_resume+0x48/0x5f http://bugzilla.kernel.org/show_bug.cgi?id=6810 Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-12[PATCH] Revert "ACPI: execute Notify() handlers on new thread"Len Brown
This effectively reverts commit b8d35192c55fb055792ff0641408eaaec7c88988 by reverts acpi_os_queue_for_execution() to what it was before that, except it changes the name to acpi_os_execute() to match ACPICA 20060512. Signed-off-by: Len Brown <len.brown@intel.com> [ The thread execution doesn't actually solve the bug it set out to solve (see http://bugzilla.kernel.org/show_bug.cgi?id=5534 for more details) because the new events can get caught behind the AML semaphore or other serialization. And when that happens, the notify threads keep on piling up until the system dies. ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10ACPI: acpi_os_allocate() fixesLen Brown
Replace acpi_in_resume with a more general hack to check irqs_disabled() on any kmalloc() from ACPI. While setting (system_state != SYSTEM_RUNNING) on resume seemed more general, Andrew Morton preferred this approach. http://bugzilla.kernel.org/show_bug.cgi?id=3469 Make acpi_os_allocate() into an inline function to allow /proc/slab_allocators to work. Delete some memset() that could fault on allocation failure. Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (44 commits) ACPI: remove function tracing macros from drivers/acpi/*.c ACPI: add support for Smart Battery ACPI: handle battery notify event on broken BIOS ACPI: handle AC notify event on broken BIOS ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: correct M6N/M6R display nodes ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: rework model detection ACPI: asus_acpi: support L5D ACPI: asus_acpi: handle internal Bluetooth / support W5A ACPI: asus_acpi: support A4G ACPI: asus_acpi: support W3400N ACPI: asus_acpi: LED display support ACPI: asus_acpi: support A3G ACPI: asus_acpi: misc cleanups ACPI: video: Remove unneeded acpi_handle from driver. ACPI: thermal: Remove unneeded acpi_handle from driver. ACPI: power: Remove unneeded acpi_handle from driver. ACPI: pci_root: Remove unneeded acpi_handle from driver. ACPI: pci_link: Remove unneeded acpi_handle from driver. ...
2006-07-02[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01Pull acpi_os_free into release branchLen Brown
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30ACPI: delete acpi_os_free(), use kfree() directlyLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28ACPI: ACPICA 20060623Bob Moore
Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: acpi_os_wait_semaphore(): silence complaintBjorn Helgaas
The ASL Acquire operator (17.5.1 in ACPI 3.0 spec) is allowed to time out and return True without acquiring the semaphore. There's no indication in the spec that this is an actual error, so this message should be debug-only, as the message for successful acquisition is. This used to be an ACPI_DEBUG_PRINT, but it was mis-classified as ACPI_DB_ERROR rather than ACPI_DB_MUTEX, so it got swept up in Thomas' recent patch to enable ACPI error messages even without CONFIG_ACPI_DEBUG. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUGThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14ACPI: ACPICA 20060608Bob Moore
Converted the locking mutex used for the ACPI hardware to a spinlock. This change should eliminate all problems caused by attempting to acquire a semaphore at interrupt level, and it means that all ACPICA external interfaces that directly access the ACPI hardware can be safely called from interrupt level. Fixed a regression introduced in 20060526 where the ACPI device initialization could be prematurely aborted with an AE_NOT_FOUND if a device did not have an optional _INI method. Fixed an IndexField issue where a write to the Data Register should be limited in size to the AccessSize (width) of the IndexField itself. (BZ 433, Fiodor Suietov) Fixed problem reports (Valery Podrezov) integrated: - Allow store of ThermalZone objects to Debug object. http://bugzilla.kernel.org/show_bug.cgi?id=5369 http://bugzilla.kernel.org/show_bug.cgi?id=5370 Fixed problem reports (Fiodor Suietov) integrated: - acpi_get_table_header() doesn't handle multiple instances correctly (BZ 364) Removed four global mutexes that were obsolete and were no longer being used. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14ACPI: execute Notify() handlers on new threadAlexey Starikovskiy
http://bugzilla.kernel.org/show_bug.cgi?id=5534 Thanks to Peter Wainwright for isolating the issue. Thanks to Andi Kleen and Bob Moore for feedback. Thanks to Richard Mace and others for testing. Updates by Konstantin Karasyov. Signed-off-by: Konstantin Karasyov <konstantin.a.karasyov@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14ACPI: ACPICA 20060421Bob Moore
Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14[ACPI] ACPICA 20060317Bob Moore
Implemented the use of a cache object for all internal namespace nodes. Since there are about 1000 static nodes in a typical system, this will decrease memory use for cache implementations that minimize per-allocation overhead (such as a slab allocator.) Removed the reference count mechanism for internal namespace nodes, since it was deemed unnecessary. This reduces the size of each namespace node by about 5%-10% on all platforms. Nodes are now 20 bytes for the 32-bit case, and 32 bytes for the 64-bit case. Optimized several internal data structures to reduce object size on 64-bit platforms by packing data within the 64-bit alignment. This includes the frequently used ACPI_OPERAND_OBJECT, of which there can be ~1000 static instances corresponding to the namespace objects. Added two new strings for the predefined _OSI method: "Windows 2001.1 SP1" and "Windows 2006". Split the allocation tracking mechanism out to a separate file, from utalloc.c to uttrack.c. This mechanism appears to be only useful for application-level code. Kernels may wish to not include uttrack.c in distributions. Removed all remnants of the obsolete ACPI_REPORT_* macros and the associated code. (These macros have been replaced by the ACPI_ERROR and ACPI_WARNING macros.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-01ACPI: inline trivial acpi_os_get_thread_id()Len Brown
acpi_os_get_thread_id() is used only for debugging code that is not enabled on Linux, so stub it out. Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-26[PATCH] ACPI: clean up memory attribute checking for map/read/writeBjorn Helgaas
ia64 ioremap is now smart enough to use the correct memory attributes, so remove the EFI checks from osl.c. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EFI: keep physical table addresses in efi structureBjorn Helgaas
Almost all users of the table addresses from the EFI system table want physical addresses. So rather than doing the pa->va->pa conversion, just keep physical addresses in struct efi. This fixes a DMI bug: the efi structure contained the physical SMBIOS address on x86 but the virtual address on ia64, so dmi_scan_machine() used ioremap() on a virtual address on ia64. This is essentially the same as an earlier patch by Matt Tolentino: http://marc.theaimsgroup.com/?l=linux-kernel&m=112130292316281&w=2 except that this changes all table addresses, not just ACPI addresses. Matt's original patch was backed out because it caused MCAs on HP sx1000 systems. That problem is resolved by the ioremap() attribute checking added for ia64. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[ACPI] ACPICA 20060127Bob Moore
Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-24[ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown
branches into release Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-08[PATCH] tpm: add bios measurement logKylene Jo Hall
According to the TCG specifications measurements or hashes of the BIOS code and data are extended into TPM PCRS and a log is kept in an ACPI table of these extensions for later validation if desired. This patch exports the values in the ACPI table through a security-fs seq_file. Signed-off-by: Seiji Munetoh <munetoh@jp.ibm.com> Signed-off-by: Stefan Berger <stefanb@us.ibm.com> Signed-off-by: Reiner Sailer <sailer@us.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>