aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/processor_idle.c
AgeCommit message (Collapse)Author
2009-09-27ACPI: kill "unused variable ‘i’" warningLinus Torvalds
Commit 3d5b6fb47a8e68fa311ca2c3447e7f8a7c3a9cf3 ("ACPI: Kill overly verbose "power state" log messages") removed the actual use of this variable, but didn't remove the variable itself, resulting in build warnings like drivers/acpi/processor_idle.c: In function ‘acpi_processor_power_init’: drivers/acpi/processor_idle.c:1169: warning: unused variable ‘i’ Just get rid of the now unused variable. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27ACPI: Kill overly verbose "power state" log messagesRoland Dreier
I was recently lucky enough to get a 64-CPU system, so my kernel log ends up with 64 lines like: ACPI: CPU0 (power states: C1[C1] C2[C3]) This is pretty useless clutter because this info is already available after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as well as /proc/acpi/processor/CPU*/power. So just delete the code that prints the C-states in processor_idle.c. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19Merge branch 'processor-procfs-2.6.32' into releaseLen Brown
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-19clockevent: Prevent dead lock on clockevents_lockSuresh Siddha
Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com> Cc: "Brown Len" <len.brown@intel.com> LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-24ACPI: fix CONFIG_ACPI_PROCFS=n build warningLen Brown
drivers/acpi/processor_idle.c:1162: warning: unused variable ‘entry’ Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-24ACPI: Make ACPI processor proc I/F depend on the ACPI_PROCFSZhao Yakui
Now whether the ACPI processor proc I/F is registered depends on the CONFIG_PROC. It had better depend on the CONFIG_ACPI_PROCFS. When the CONFIG_ACPI_PROCFS is unset in kernel configuration, the ACPI processor proc I/F won't be registered. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: idle: rename lapic timer workaround routinesLen Brown
cosmetic only. The lapic_timer workaround routines are specific to the lapic_timer, and are not acpi-generic. old: acpi_timer_check_state() acpi_propagate_timer_broadcast() acpi_state_timer_broadcast() new: lapic_timer_check_state() lapic_timer_propagate_broadcast() lapic_timer_state_broadcast() also, simplify the code in acpi_processor_power_verify() so that lapic_timer_check_state() is simply called from one place for all valid C-states, including C1. Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPI: Disable ARB_DISABLE on platforms where it is not neededPallipadi, Venkatesh
ARB_DISABLE is a NOP on all of the recent Intel platforms. For such platforms, reduce contention on c3_lock by skipping the fake ARB_DISABLE. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26cpuidle: fix AMD C1E suspend hangShaohua Li
When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in suspend/resume path. This hasn't any impact in runtime path. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26cpuidle: makes AMD C1E work in acpi_idleShaohua Li
When AMD C1E is enabled, local APIC timer will stop even in C1. This patch uses broadcast IPI to replace local APIC timer in C1. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid boot hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-16Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', ↵Len Brown
'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
2009-05-16ACPI: Idle C-states disabled by max_cstate should not disable the TSCLen Brown
Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-16ACPI: idle: fix init-time TSC check regressionLen Brown
A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frans Pop <elendil@planet.nl>
2009-05-15ACPI: suspend: restore BM_RLD on resumeLen Brown
In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24Merge branch 'bugzilla-13142' into releaseLen Brown
2009-04-24Merge branch 'hpet' into releaseLen Brown
2009-04-23ACPI: prevent processor.max_cstate=0 boot crashLen Brown
As processor.max_cstate is an init-time-only modparam, sanity checking it at init-time is sufficient. http://bugzilla.kernel.org/show_bug.cgi?id=13142 Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23ACPI/hpet: prevent boot hang when hpet=force used on ICH-4MLen Brown
Linux tells ICH4 users that they can (manually) invoke "hpet=force" to enable the undocumented ICH-4M HPET. The HPET becomes available for both clocksource and clockevents. But as of ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) the HPET may be used via clocksource for idle accounting, and hpet=force on an ICH4 box hangs boot. It turns out that touching the MMIO HPET withing the ARB_DIS part of C3 will hang the hardware. The fix is to simply move the timer access outside the ARB_DIS region. This is a no-op on modern hardware because ARB_DIS is no longer used. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22ACPI: delete obsolete "bus master activity" proc fieldLen Brown
Linux-2.6.29 deleted the legacy ACPI idle handler, leaving the CPU_IDLE handler, which does not track bus master activity. So delete the unused bm_activity field -- it is confusing to print an always zero value. This patch could break programs that parse /proc/acpi/processor/*/power, since it deletes this line from that file: bus master activity: 00000000 http://bugzilla.kernel.org/show_bug.cgi?id=13145 is not fixed by this patch, but provoked this patch. Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22ACPI: idle: mark_tsc_unstable() at init-time, not run-timeLen Brown
The c2 and c3 idle handlers check tsc_halts_in_c() after every time they return from idle. Um, when?:-) Move this check to init-time to remove the unnecessary run-time overhead, and also to have the check complete before the first entry into the idle handler. ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) replaced the hard-coded use of the PM-timer inside idle, with ktime_get_readl(), which possibly uses the TSC -- so it is now especially prudent to detect a broken TSC before entering idle. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07x86 ACPI: Add support for Always Running APIC timerVenkatesh Pallipadi
Add support for Always Running APIC timer, CPUID_0x6_EAX_Bit2. This bit means the APIC timer continues to run even when CPU is in deep C-states. The advantage is that we can use LAPIC timer on these CPUs always, and there is no need for "slow to read and program" external timers (HPET/PIT) and the timer broadcast logic and related code in C-state entry and exit. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'pmtimer-overflow' into releaseLen Brown
2009-04-03ACPI: Remove R40e c-state blacklistThomas Renninger
The recent ACPICA patch (ACPICA: FADT: Favor 32-bit register addresses for compatibility) makes machine to use the right FADT HW addresses and C-states now work fine. http://bugzilla.kernel.org/show_bug.cgi?id=8246 Signed-off-by: Thomas Renninger <trenn@suse.de> Tested-by: Mark Doughty <me@markdoughty.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-26ACPICA: Rename ACPI bit register access functionsBob Moore
Rename acpi_get_register and acpi_set_register to clarify the purpose of these functions. New names are acpi_read_bit_register and acpi_write_bit_register. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-26ACPICA: Optimize ACPI register lockingBob Moore
Removed locking for reads from the ACPI bit registers in PM1 Status, Enable, Control, and PM2 Control. The lock is not required when reading the single-bit registers. The acpi_get_register_unlocked function is no longer needed and has been removed. This will improve performance for reads on these registers. ACPICA BZ 760. http://www.acpica.org/bugzilla/show_bug.cgi?id=760 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17acpi: fix of pmtimer overflow that make Cx states time incorrectalex.shi
We found Cx states time abnormal in our some of machines which have 16 LCPUs, the C0 take too many time while system is really idle when kernel enabled tickless and highres. powertop output is below: PowerTOP version 1.9 (C) 2007 Intel Corporation Cn Avg residency P-states (frequencies) C0 (cpu running) (40.5%) 2.53 Ghz 0.0% C1 0.0ms ( 0.0%) 2.53 Ghz 0.0% C2 128.8ms (59.5%) 2.40 Ghz 0.0% 1.60 Ghz 100.0% Wakeups-from-idle per second : 4.7 interval: 20.0s no ACPI power usage estimate available Top causes for wakeups: 41.4% ( 24.9) <interrupt> : extra timer interrupt 20.2% ( 12.2) <kernel core> : usb_hcd_poll_rh_status (rh_timer_func) After tacking detailed for this issue, Yakui and I find it is due to 24 bit PM timer overflows when some of cpu sleep more than 4 seconds. With tickless kernel, the CPU want to sleep as much as possible when system idle. But the Cx sleep time are recorded by pmtimer which length is determined by BIOS. The current Cx time was gotten in the following function from driver/acpi/processor_idle.c: static inline u32 ticks_elapsed(u32 t1, u32 t2) { if (t2 >= t1) return (t2 - t1); else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER)) return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF); else return ((0xFFFFFFFF - t1) + t2); } If pmtimer is 24 bits and it take 5 seconds from t1 to t2, in above function, just about 1 seconds ticks was recorded. So the Cx time will be reduced about 4 seconds. and this is why we see above powertop output. To resolve this problem, Yakui and I use ktime_get() to record the Cx states time instead of PM timer as the following patch. the patch was tested with i386/x86_64 modes on several platforms. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Tested-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yakui.zhao <yakui.zhao@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06ACPI: delete CPU_IDLE=n codeLen Brown
CPU_IDLE=y has been default for ACPI=y since Nov-2007, and has shipped in many distributions since then. Here we delete the CPU_IDLE=n ACPI idle code, since nobody should be using it, and we don't want to maintain two versions. Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-28ACPI: remove BM_RLD access from idle entry pathLen Brown
It is true that BM_RLD needs to be set to enable bus master activity to wake an older chipset (eg PIIX4) from C3. This is contrary to the erroneous wording the ACPI 2.0, 3.0 specifications that suggests that BM_RLD is an indicator rather than a control bit. ACPI 1.0's correct wording should be restored in ACPI 4.0: http://www.acpica.org/bugzilla/show_bug.cgi?id=689 But the kernel should not have to clear BM_RLD when entering a non C3-type state just to set it again when entering a C3-type C-state. We should be able to set BM_RLD at boot time and leave it alone -- removing the overhead of accessing this IO register from the idle entry path. Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-28ACPI: remove locking from PM1x_STS register readsLen Brown
PM1a_STS and PM1b_STS are twins that get OR'd together on reads, and all writes are repeated to both. The fields in PM1x_STS are single bits only, there are no multi-bit fields. So it is not necessary to lock PM1x_STS reads against writes because it is impossible to read an intermediate value of a single bit. It will either be 0 or 1, even if a write is in progress during the read. Reads are asynchronous to writes no matter if a lock is used or not. Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-06remove linux/hardirq.h from asm-generic/local.hRussell King
While looking at reducing the amount of architecture namespace pollution in the generic kernel, I found that asm/irq.h is included in the vast majority of compilations on ARM (around 650 files.) Since asm/irq.h includes a sub-architecture include file on ARM, this causes a negative impact on the ccache's ability to re-use the build results from other sub-architectures, so we have a desire to reduce the dependencies on asm/irq.h. It turns out that a major cause of this is the needless include of linux/hardirq.h into asm-generic/local.h. The patch below removes this include, resulting in some 250 to 300 files (around half) of the kernel then omitting asm/irq.h. My test builds still succeed, provided two ARM files are fixed (arch/arm/kernel/traps.c and arch/arm/mm/fault.c) - so there may be negative impacts for this on other architectures. Note that x86 does not include asm/irq.h nor linux/hardirq.h in its asm/local.h, so this patch can be viewed as bringing the generic version into line with the x86 version. [kosaki.motohiro@jp.fujitsu.com: add #include <linux/irqflags.h> to acpi/processor_idle.c] [adobriyan@gmail.com: fix sparc64] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-16x86: support always running TSC on Intel CPUsVenki Pallipadi
Impact: reward non-stop TSCs with good TSC-based clocksources, etc. Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means that the TSC is invariant with C/P/T states and always runs at constant frequency. With Intel CPUs, we have 3 classes * CPUs where TSC runs at constant rate and does not stop n C-states * CPUs where TSC runs at constant rate, but will stop in deep C-states * CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep C-states. To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates that TSC does not stop in deep C-states. CPUID_0x8000000_Bit8 indicates both these feature bit can be set. We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel CPUs, based on model checks. We can use TSC on such CPUs for time, as long as those CPUs do not support/enter deep C-states. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-07ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.hBjorn Helgaas
Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-16cpuidle: update the last_state acpi cpuidle reflecting actual state enteredVenkatesh Pallipadi
reflect the actual state entered in dev->last_state, when actaul state entered is different from intended one. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-08-15acpi: trivial cleanupsPavel Machek
Trivial cleanups for ACPI. Fix misspelling in printk(), fix mismerge, add file header. AK: removed file header Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-28ACPI/CPUIDLE: prevent setting pm_idle to NULLThomas Gleixner
pm_idle_save resp. pm_idle_old can be NULL when the restore code in acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler() is called. This can set pm_idle unconditinally to NULL, which causes the kernel to panic when calling pm_idle in the x86 idle code. This was covered by an extra check for !pm_idle in the x86 idle code, which was removed during the x86 idle code refactoring. Instead of restoring the pm_idle check in the x86 code prevent the acpi/cpuidle code to set pm_idle to NULL. Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309 Based on a debug patch from Ingo Molnar Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26ftrace: disable tracing on acpi idle callsSteven Rostedt
The acpi idle waits calls local_irq_save and then uses mwait to go into idle. The tracer gets reenabled at local_irq_save but does not detect that the idle allows for wake ups. This patch adds code to disable the tracing when acpi puts the CPU to idle. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16ACPI : Create "idle=nomwait" bootparamZhao Yakui
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Create "idle=halt" bootparamZhao Yakui
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: change processors from array to per_cpu variableMike Travis
Change processors from an array sized by NR_CPUS to a per_cpu variable. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-26smp_call_function: get rid of the unused nonatomic/retry argumentJens Axboe
It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-11cpuidle acpi driver: fix oops on AC<->DCVenkatesh Pallipadi
cpuidle and acpi driver interaction bug with the way cpuidle_register_driver() is called. Due to this bug, there will be oops on AC<->DC on some systems, where they support C-states in one DC and not in AC. The current code does ON BOOT: Look at CST and other C-state info to see whether more than C1 is supported. If it is, then acpi processor_idle does a cpuidle_register_driver() call, which internally enables the device. ON CST change notification (AC<->DC) and on suspend-resume: acpi driver temporarily disables device, updates the device with any new C-states, and reenables the device. The problem is is on boot, there are no C2, C3 states supported and we skip the register. Later on AC<->DC, we may get a CST notification and we try to reevaluate CST and enabled the device, without actually registering it. This causes breakage as we try to create /sys fs sub directory, without the parent directory which is created at register time. Thanks to Sanjeev for reporting the problem here. http://bugzilla.kernel.org/show_bug.cgi?id=10394 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits) ACPI: Fix acpi_processor_idle and idle= boot parameters interaction acpi: fix section mismatch warning in pnpacpi intel_menlo: fix build warning ACPI: Cleanup: Remove unneeded, multiple local dummy variables ACPI: video - fix permissions on some proc entries ACPI: video - properly handle errors when registering proc elements ACPI: video - do not store invalid entries in attached_array list ACPI: re-name acpi_pm_ops to acpi_suspend_ops ACER_WMI/ASUS_LAPTOP: fix build bug thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed ACPI: check a return value correctly in acpi_power_get_context() #if 0 acpi/bay.c:eject_removable_drive() eeepc-laptop: add hwmon fan control eeepc-laptop: add backlight eeepc-laptop: add base driver ACPI: thinkpad-acpi: bump up version to 0.20 ACPI: thinkpad-acpi: fix selects in Kconfig ACPI: thinkpad-acpi: use a private workqueue ACPI: thinkpad-acpi: fluff really minor fix ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation ... Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c manually.
2008-04-30Merge branches 'release', 'acpica', 'bugzilla-10224', 'bugzilla-9772', ↵Len Brown
'bugzilla-9916', 'ec', 'eeepc', 'idle', 'misc', 'pm-legacy', 'sysfs-links-2.6.26', 'thermal', 'thinkpad' and 'video' into release
2008-04-30ACPI: Fix acpi_processor_idle and idle= boot parameters interactionVenkatesh Pallipadi
acpi_processor_idle and "idle=" boot parameter interaction is broken. The problem is that, at boot time acpi driver is checking for "idle=" boot option and not registering the acpi idle handler. But, when there is a CST changed callback (typically when switching AC <-> battery or suspend-resume) there are no checks for boot_option_idle_override and acpi idle handler tries to get installed with nasty side effects. With CPU_IDLE configured this issue causes results in a nasty oops on CST change callback and without CPU_IDLE there is no oops, but boot option of "idle=" gets ignored and acpi idle handler gets installed. Change the behavior to not do anything in acpi idle handler when there is a "idle=" boot option. Note that the problem is only there when "idle=" boot option is used. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29acpi: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Len Brown <lenb@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-27fix idle (arch, acpi and apm) and lockdepPeter Zijlstra
OK, so 25-mm1 gave a lockdep error which made me look into this. The first thing that I noticed was the horrible mess; the second thing I saw was hacks like: 71e93d15612c61c2e26a169567becf088e71b8ff The problem is that arch idle routines are somewhat inconsitent with their IRQ state handling and instead of fixing _that_, we go paper over the problem. So the thing I've tried to do is set a standard for idle routines and fix them all up to adhere to that. So the rules are: idle routines are entered with IRQs disabled idle routines will exit with IRQs enabled Nearly all already did this in one form or another. Merge the 32 and 64 bit bits so they no longer have different bugs. As for the actual lockdep warning; __sti_mwait() did a plainly un-annotated irq-enable. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-242.6.25 regression: powertop says 120K wakeups/secVenkatesh Pallipadi
Patch to fix huge number of wakeups reported due to recent changes in processor_idle.c. The problem was that the entry_method determination was broken due to one of the recent commits (bc71bec91f987) causing C1 entry to not to go to halt. http://lkml.org/lkml/2008/3/22/124 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-26cpuidle: fix 100% C0 statistics regressionVenki Pallipadi
commit 9b12e18cdc1553de62d931e73443c806347cd974 'ACPI: cpuidle: Support C1 idle time accounting' was implicated in a 100% C0 idle regression. http://bugzilla.kernel.org/show_bug.cgi?id=10076 It pointed out a potential problem where the menu governor may get confused by the C-state residency time from poll idle or C1 idle, where this timing info is not accurate. This inaccuracy is due to interrupts being handled before we account for C-state exit. Do not mark TIME_VALID for CO poll state. Mark C1 time as valid only with the MWAIT (CSTATE_FFH) entry method. This makes governors use the timing information only when it is correct and eliminates any wrong policy decisions that may result from invalid timing information. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>