aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/thermal.c
AgeCommit message (Collapse)Author
2007-10-19Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (41 commits) ACPICA: hw: Don't carry spinlock over suspend ACPICA: hw: remove use_lock flag from acpi_hw_register_{read, write} ACPI: cpuidle: port idle timer suspend/resume workaround to cpuidle ACPI: clean up acpi_enter_sleep_state_prep Hibernation: Make sure that ACPI is enabled in acpi_hibernation_finish ACPI: suppress uninitialized var warning cpuidle: consolidate 2.6.22 cpuidle branch into one patch ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfs ACPI: AC: Add sysfs interface ACPI: SBS: Add sysfs alarm ACPI: SBS: Add ACPI_PROCFS around procfs handling code. ACPI: SBS: Add support for power_supply class (and sysfs) ACPI: SBS: Make SBS reads table-driven. ACPI: SBS: Simplify data structures in SBS ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002) ACPI: EC: Add new query handler to list head. ACPI: Add acpi_bus_generate_event4() function ACPI: Battery: add sysfs alarm ACPI: Battery: Add sysfs support ACPI: Battery: Misc clean-ups, no functional changes ... Fix up conflicts in drivers/misc/thinkpad_acpi.[ch] manually
2007-10-09drivers/firmware: const-ify DMI API and internalsJeff Garzik
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-09-05ACPI: Thermal: Drop concurrent thermal checksAlexey Starikovskiy
Fix for #3686, where get_temperature() may cause thermal notify, which causes one more get_temperature(). Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-04ACPI: thermal: use round_jiffies when thermal zone polling is enabledLen Brown
Properly functioning systems do not use thermal zone polling, they use event-based notification. However, some users enable periodic thermal zone polling to work around bugs on their platforms, and at least one platform exists with a real _TZP that requests polling. While thermal zone polling (_TZP) is specified in units to 0.1 seconds, it actually has a maximum granularity of 1 second. Thus, we can safely round up the _TZP timeout to occur on the next 1-second boundary. This will batch it with other 1-second-granularity timers in the system and thus potentially extend processor idle duration. Note that the same timer is used both for _TZP and for passive processor thermal throttling. We can not round up the timeout when it is used for passive thermal throttling. Also, we can not make this a deferrable timer, as temperature is just as relevant during idle as it is during non-idle. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull events into release branchLen Brown
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as suchPavel Machek
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23ACPI: Schedule /proc/acpi/event for removalLen Brown
Schedule /proc/acpi/event for removal in 6 months. Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event() to make sure there is no confusion that it is for /proc/acpi/event only. Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event. There is no functional change if CONFIG_ACPI_PROC_EVENT=y Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23ACPI: don't duplicate input events on netlinkZhang Rui
The previous events patch added a netlink event for every user of the legacy /proc/acpi/event interface. However, some users of /proc/acpi/event are really input events, and they already report their events via the input layer. Introduce a new interface, acpi_bus_generate_netlink_event(), which is explicitly called by devices that want to repoprt events via netlink. This allows the input-like events to opt-out of generating netlink events. In summary: events that are sent via netlink: ac/battery/sbs thermal processor thinkpad_acpi dock/bay events that are sent via input layer: button video hotkey thinkpad_acpi hotkey asus_acpi/asus-laptop hotkey sonypi/sonylaptop Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-20ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZXLen Brown
This system BIOS sets a critical temperature to 65C, which is too low. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155496 Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-14ACPI: thermal: create "thermal.crt=C" bootparamLen Brown
Some hardware will malfunction at a temperature below the BIOS provided critical shutdown threshold. This hook allows moving the critical trip points down to a temperature which provokes a graceful shutdown before the hardware malfunction. http://bugzilla.kernel.org/show_bug.cgi?id=8884 WARNING: A trip-point override will not get noticed until the system delivers a temperature change event, or unless thermal zone polling is enabled. eg. "thermal.tzp=10" Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-14ACPI: thermal: clean up MODULE_PARM_DESC newlinesLen Brown
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOSLen Brown
Use DMI to: 1. enable polling (BIOS thermal events are broken) 2. disable active trip points (BIOS fan control is broken) 3. disable passive trip point (BIOS hard-codes it too low) The actual temperature reading does work, and with the aid of polling, the critical trip point should work too. http://bugzilla.kernel.org/show_bug.cgi?id=8842 Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.act=" to disable or override active trip pointLen Brown
thermal.act=-1 disables all active trip points in all ACPI thermal zones. thermal.act=C, where C > 0, overrides all lowest temperature active trip points in all thermal zones to C degrees Celsius. Raising this trip-point may allow you to keep your system silent up to a higher temperature. However, it will not allow you to raise the lowest temperature trip point above the next higher trip point (if there is one). Lowering this trip point may kick in the fan sooner. Note that overriding this trip-point will disable any BIOS attempts to implement hysteresis around the lowest temperature trip point. This may result in the fan starting and stopping frequently if temperature frequently crosses C. WARNING: raising trip points above the manufacturer's defaults may cause the system to run at higher temperature and shorten its life. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.nocrt" to disable critical actionsLen Brown
thermal.nocrt=1 disables actions on _CRT and _HOT ACPI thermal zone trip-points. They will be marked as <disabled> in /proc/acpi/thermal_zone/*/trip_points. There are two cases where this option is used: 1. Debugging a hot system crossing valid trip point. If your system fan is spinning at full speed, be sure that the vent is not clogged with dust. Many laptops have very fine thermal fins that are easily blocked. Check that the processor fan-sink is properly seated, has the proper thermal grease, and is really spinning. Check for fan related options in BIOS SETUP. Sometimes there is a performance vs quiet option. Defaults are generally the most conservative. If your fan is not spinning, yet /proc/acpi/fan/ has files in it, please file a Linux/ACPI bug. WARNING: you risk shortening the lifetime of your hardware if you use this parameter on a hot system. Note that this refers to all system components, including the disk drive. 2. Working around a cool system crossing critical trip point due to erroneous temperature reading. Try again with CONFIG_HWMON=n There is known potential for conflict between the the hwmon sub-system and the ACPI BIOS. If this fixes it, notify lm-sensors@lm-sensors.org and linux-acpi@vger.kernel.org Otherwise, file a Linux/ACPI bug, or notify just linux-acpi@vger.kernel.org. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.psv=" to override passive trip pointsLen Brown
"thermal.psv=-1" disables passive trip points for all ACPI thermal zones. "thermal.psv=C", where 'C' is degrees Celsius, overrides all existing passive trip points for all ACPI thermal zones. thermal.psv is checked at module load time, and in response to trip-point change events. Note that if the system does not deliver thermal zone temperature change events near the new trip-point, then it will not be noticed. To force your custom trip point to be noticed, you may need to enable polling: eg. thermal.tzp=3000 invokes polling every 5 minutes. Note that once passive thermal throttling is invoked, it has its own internal Thermal Sampling Period (_TSP), that is unrelated to _TZP. WARNING: disabling or raising a thermal trip point may result in increased running temperature and shorter hardware lifetime on some systems. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: expose "thermal.tzp=" to set global polling frequencyLen Brown
Thermal Zone Polling frequency (_TZP) is an optional ACPI object recommending the rate that the OS should poll the associated thermal zone. If _TZP is 0, no polling should be used. If _TZP is non-zero, then the platform recommends that the OS poll the thermal zone at the specified rate. The minimum period is 30 seconds. The maximum period is 5 minutes. (note _TZP and thermal.tzp units are in deci-seconds, so _TZP = 300 corresponds to 30 seconds) If _TZP is not present, ACPI 3.0b recommends that the thermal zone be polled at an "OS provided default frequency". However, common industry practice is: 1. The BIOS never specifies any _TZP 2. High volume OS's from this century never poll any thermal zones Ie. The OS depends on the platform's ability to provoke thermal events when necessary, and the "OS provided default frequency" is "never":-) There is a proposal that ACPI 4.0 be updated to reflect common industry practice -- ie. no _TZP, no polling. The Linux kernel already follows this practice -- thermal zones are not polled unless _TZP is present and non-zero. But thermal zone polling is useful as a workaround for systems which have ACPI thermal control, but have an issue preventing thermal events. Indeed, some Linux distributions still set a non-zero thermal polling frequency for this reason. But rather than ask the user to write a polling frequency into all the /proc/acpi/thermal_zone/*/polling_frequency files, here we simply document and expose the already existing module parameter to do the same at system level, to simplify debugging those broken platforms. Note that thermal.tzp is a module-load time parameter only. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.off=1" to disable ACPI thermal supportLen Brown
"thermal.off=1" disables all ACPI thermal support at boot time. CONFIG_ACPI_THERMAL=n can do this at build time. "# rmmod thermal" can do this at run time, as long as thermal is built as a module. WARNING: On some systems, disabling ACPI thermal support will cause the system to run hotter and reduce the lifetime of the hardware. Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI ↵Thomas Renninger
drivers modpost is going to use these to create e.g. acpi:ACPI0001 in modules.alias. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-18Add common orderly_poweroff()Jeremy Fitzhardinge
Various pieces of code around the kernel want to be able to trigger an orderly poweroff. This pulls them together into a single implementation. By default the poweroff command is /sbin/poweroff, but it can be set via sysctl: kernel/poweroff_cmd. This is split at whitespace, so it can include command-line arguments. This patch replaces four other instances of invoking either "poweroff" or "shutdown -h now": two sbus drivers, and acpi thermal management. sparc64 has its own "powerd"; still need to determine whether it should be replaced by orderly_poweroff(). Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David S. Miller <davem@davemloft.net>
2007-06-18ACPI: gracefully print null trip-point deviceThomas Renninger
if acpi_bus_get_device() returns NULL, print nothing instead of "<NUL" in /proc/acpi/thermal_zone/*/trip_points Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-29ACPI: thermal: Replace pointer with name in trip_pointsThomas Renninger
For users with active thermal trip points, they need the fan's name, rather than its address, to understand where to look to observe and control fan state. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30ACPI: delete un-reliable concept of cooling modeLen Brown
The scheme where the thermal driver displayed the cooling mode /proc/acpi/thermal_zone/*/cooling_mode was flawed in two ways. First, the success of _SCP doesn't actually mean that the BIOS moved any trip points. On many BIOS, _SCP is present, but does nothing. So displaying what _SCP executed actually was wrong more times than it was right. Second, examining the relative position of the trip points when the thermal_zone is added is insufficient -- as the BIOS reserves the right to change the trip points at run-time. The only reliable way for the user to determine if the thermal zone is in active, passive, or critical mode is to examine the relative position of the trip points. The user can do this without the kernel doing it for them by looking in /proc/acpi/thermal_zone/*/trip_points New contents for /proc/acpi/thermal_zone/*/cooling_mode: If _SCP available: "0 - Active; 1 - Passive\n" If _SCP unavailable: "<setting not supported>\n" Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30ACPI: thermal trip points are read-onlyLen Brown
/proc/acpi/thermal_zone/*/trip_points displays what the kernel reads from the BIOS via ACPI. If you echo a string of ':' deliminted numbers to this file then it will change what it displays. But it shouldn't, since the kernel has no way to communicate these changes to ACPI thermal zones. ACPI thermal zone trip points are read-only. The kernel does have the opportunity to ask the BIOS to change the trip points with _SCP - Set Cooling Policy. Request Active Cooling Mode: # echo 0 > /proc/acpi/thermal_zone/*/cooling_policy Request Passive Cooling Mode: # echo 1 > /proc/acpi/thermal_zone/*/cooling_policy However, in practice it is quite rare for the BIOS to support the optional _SCP, and it is even more rare for the BIOS to export an _SCP that actually changes the trip points. Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-24acpi-thermal: fix mod_timer() intervalAndrew Morton
Use relative time, not absolute. Discovered by Jung-Ik (John) Lee <jilee@google.com>. Cc: Jung-Ik (John) Lee <jilee@google.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16Pull bugzilla-7570 into release branchLen Brown
2007-02-16Pull fluff into release branchLen Brown
Conflicts: arch/x86_64/pci/mmconfig.c drivers/acpi/bay.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16Pull misc-for-upstream into release branchLen Brown
Conflicts: drivers/usb/misc/appledisplay.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16ACPI: fix fan after resume from S3Konstantin Karasyov
http://bugzilla.kernel.org/show_bug.cgi?id=7570 Signed-off-by: Konstantin Karasyov <konstantin.a.karasyov@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16ACPI: thermal: fix units in debug outputSanjoy Mahajan
http://bugzilla.kernel.org/show_bug.cgi?id=4972 Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12ACPI: delete extra #defines in /drivers/acpi/ driversLen Brown
Cosmetic only. Except in a single case, #define ACPI_*_DRIVER_NAME were invoked 0 or 1 times. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: fix acpi_driver.name usageLen Brown
It was erroneously used as a description rather than a name. ie. turn this: lenb@se7525gp2:/sys> ls bus/acpi/drivers ACPI AC Adapter Driver ACPI Embedded Controller Driver ACPI Power Resource Driver ACPI Battery Driver ACPI Fan Driver ACPI Processor Driver ACPI Button Driver ACPI PCI Interrupt Link Driver ACPI Thermal Zone Driver ACPI container driver ACPI PCI Root Bridge Driver hpet into this: lenb@se7525gp2:~> ls /sys/bus/acpi/drivers ac battery button container ec fan hpet pci_link pci_root power processor thermal Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-03Pull sysfs into test branchLen Brown
Conflicts: Documentation/feature-removal-schedule.txt include/acpi/acpi_drivers.h Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-15ACPI: add ACPI bus_type for driver modelPatrick Mochel
Add ACPI bus_type for Linux driver model. 1. .shutdown method is added into acpi_driver.ops needed by bus_type operations. 2. remove useless parameter 'int state' in .resume method. 3. change parameter 'int state' to 'pm_message_t state' in .suspend method. Note: The new .uevent method mark ACPI drivers by PNPID instead of by name. Udev script needs to look for "HWID=" or "COMPTID=" to load ACPI drivers as a result. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: ACPI_DOCK: Initialize the atomic notifier list ACPI: acpi_os_allocate() fixes ACPI: SBS: fix initialization, sem2mutex ACPI: add 'const' to several ACPI file_operations ACPI: delete some defaults from ACPI Kconfig ACPI: "Device `[%s]' is not power manageable" make message debug only ACPI: ACPI_DOCK Kconfig Revert "Revert "ACPI: dock driver"" ACPI: acpi_os_get_thread_id() returns current ACPI: ACPICA 20060707
2006-07-10[PATCH] ACPI: fix fan/thermal resumeKonstantin Karasyov
Daniel Ritz <daniel.ritz-ml@swissonline.ch> says: The acpi driver suspend/resume patches that went in recently caused a regression on my box (toshiba tecra 8000 laptop): after resume from swsusp the fan turns on keeping blowing cold air out of my notebook. before the patches, the fan was off and would only make noise when required. it's the same thing described in bugzilla.kernel.org #5000. the acpi suspend/resume patches or at least parts of them originate in this bug. now the last patch in the report (attach id 8438) actually fixes the problem - for me and the reporter. this is a trimmed down version of that patch. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Len Brown <len.brown@intel.com> Cc: Sanjoy Mahajan <sanjoy@mrao.cam.ac.uk> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10ACPI: add 'const' to several ACPI file_operationsArjan van de Ven
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: thermal: Remove unneeded acpi_handle from driver.Patrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: thermal: Use acpi_device's handle instead of driver'sPatrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: thermal: add struct acpi_device to struct acpi_thermal.Patrick Mochel
- Use it instead of acpi_bus_get_device() where we can.. Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_WARNING() -- use printk(KERN_WARNING...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUGThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-15Pull bugzilla-5000 into release branchLen Brown
2006-06-15Pull trivial2 into release branchLen Brown
2006-06-15Pull trivial into release branchLen Brown