aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/video.c
AgeCommit message (Collapse)Author
2009-10-28ACPI: clean up video.c boundary checks and typesArjan van de Ven
proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-13ACPI: video: Loosen strictness of video bus detection codeStefan Bader
BugLink: http://bugs.launchpad.net/bugs/333386 Currently a video bus device must (beside other criteria) define _DOD and _DOS methods to be considered a video device. Some broken BIOSes prevented working backlight control by only defining both for one (non-existing bus) and only _DOD for the rest. With this patch in place the other bus definitions were considered too and backlight control started to work again. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-26Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: new driver for ADP5520/ADP5501 MFD PMICs backlight: extend event support to also support poll() backlight/eeepc-laptop: Update the backlight state when we change brightness backlight/acpi: Update the backlight state when we change brightness backlight: Allow drivers to update the core, and generate events on changes backlight: switch to da903x driver to dev_pm_ops backlight: Add support for the Avionic Design Xanthos backlight device. backlight: spi driver for LMS283GF05 LCD backlight: move hp680-bl's probe function to .devinit.text backlight: Add support for new Apple machines. backlight: mbp_nvidia_bl: add support for MacBookAir 1,1 backlight: Add WM831x backlight driver Trivial conflicts due to '#ifdef CONFIG_PM' differences in drivers/video/backlight/da903x_bl.c
2009-09-21backlight/acpi: Update the backlight state when we change brightnessMatthew Garrett
Trigger a status update when we change the brightness in the driver, thus allowing userspace to present appropriate UI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-19Merge branch 'video' into releaseLen Brown
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19Merge branch 'misc-2.6.32' into releaseLen Brown
Conflicts: drivers/pci/dmar.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19ACPI: linux/acpi.h should not include linux/dmi.hLen Brown
users of acpi.h that need dmi.h should include it directly. Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19Merge branch 'sfi-base' into releaseLen Brown
Conflicts: drivers/acpi/power.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-31ACPI video: work-around BIOS AML bug in _BQCZhang Rui
_BQC on some laptops returns an uninitialized value when it's invoked for the first time. Set the laptop to the maximum backlight level in this case. http://bugzilla.kernel.org/attachment.cgi?id=22675 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29ACPI: video - rename cdev to cooling_dev -- syntax onlyDmitry Torokhov
Cdev name is normally used for ether class devices or character devices so rename member to avoid confusion for casual reader of the code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29ACPI: video - fix potential crash when unloadingDmitry Torokhov
thermal_cooling_device_register() returns error encoded in a pointer when it fails in which case we need to explictly set device->cdev to NULL so we don't try to unregister it when unloading. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29ACPI video: ignore buggy _BQCVladimir Serbinenko
_BQC doesn't return a value listed in _BCL method. http://bugzilla.kernel.org/show_bug.cgi?id=13511 ingore the buggy _BQC method in this case Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Scott Howard <showard314@gmail.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: don't free non-existent backlight in acpi video moduleKeith Packard
acpi_video_put_one_device was attempting to remove sysfs entries and unregister a backlight device without first checking that said backlight device structure had been created. Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPI: video: remove unneeded memsetsZhang Rui
device->cap and video->cap are zeroed initially so we don't need to clear them again. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-23ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightnessZhang Rui
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23ACPI: Add the reference count to avoid unloading ACPI video bus twiceZhao Yakui
Sometimes both acpi video and i915 driver are compiled as modules. And there exists the strict dependency between the two drivers. The acpi video bus will be unloaded in course of unloading the i915 driver. If we unload the acpi video driver, then the kernel oops will be triggered. Add the reference count to avoid unloading the ACPI video bus twice. The reference count should be checked before unregistering the acpi video bus. If the reference count is already zero, it won't unregister it again. And after the acpi video bus is already unregistered, the reference count will be set to zero. http://bugzilla.kernel.org/show_bug.cgi?id=13396 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23Show the physical device node of backlight class device.Zhang Rui
Create symbol link from backlight class device to ACPI video device. More and more laptops are shipped with multiple ACPI video devices, while we export only one of them to userspace. With this patch applied, we can know which ACPI video device is used by "cat /sys/class/backlight/acpi_video0/device/path". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17ACPI: video: convert to acpi_get_pci_devAlexander Chiang
Now that acpi_get_pci_dev is available, let's use it instead of acpi_get_physical_pci_device() Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29Merge branches 'bugzilla-13121+', 'bugzilla-13233', ↵Len Brown
'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
2009-05-29drm/i915: acpi/video.c fix section mismatch warningJaswinder Singh Rajput
Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightnessZhang Rui
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display ↵Zhang Rui
brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-16Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', ↵Len Brown
'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
2009-05-07ACPI: video: DMI workaround another broken Acer BIOS enabling display brightnessLen Brown
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-28Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
2009-04-24ACPI video: dmi check for broken _BQC on Acer Aspire 5720Zhang Rui
On Acer Aspire 5720, _BQC always returns a value 9 smaller than the actual brightness level. Add dmi quirk for this laptop. http://bugzilla.kernel.org/show_bug.cgi?id=13121 Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24Merge branch 'bugzilla-12249' into releaseLen Brown
2009-04-20ACPI video: fix an error when the brightness levels on AC and on Battery are ↵Zhang Rui
same when the brightness level on AC and brightness level on Battery are same, the level_ac_battery is 1 in the current code, which is wrong. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-17drm/i915: Unregister ACPI video driver when exitingMatthew Garrett
The i915 DRM triggers registration of the ACPI video driver on load. It should unregister it at unload in order to avoid generating backtraces on being reloaded. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-11ACPI video: handle indexed _BQC correctlyZhang Rui
In the current code, for a box with an indexed _BQC method, we 1. get the current brightness level by evaluating _BQC 2. set the value gotten in step 1 to _BCM 3. get the current brightness level again 4. set the _BQC_use_index flag if the results gotten in step 1 and in step 3 don't equal. But this logic doesn't work actually, because the _BQC_use_index is not set when acpi_video_device_lcd_set_level is invoked. This results in a failure in step 2. http://bugzilla.kernel.org/show_bug.cgi?id=12249#c83 Now, we set the _BQC_use_index flag after invoking _BQC for the first time. And reevaluate the _BQC to get the correct brightness level. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07ACPI: video: use .notify method instead of installing handler directlyBjorn Helgaas
This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'constify' into releaseLen Brown
2009-04-05Merge branch 'video' into releaseLen Brown
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-04video: build fixLen Brown
acpi_video_device_write_state() and friends now return ssize_t, while the constify patch assumed it was still int. Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03ACPI: constify VFTs (2/2)Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03ACPI: constify VFTs (1/2)Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-27ACPI: Populate DIDL before registering ACPI video device on IntelMatthew Garrett
Intel graphics hardware that implements the ACPI IGD OpRegion spec requires that the list of display devices be populated before any ACPI video methods are called. Detect when this is the case and defer registration until the opregion code calls it. Fixes crashes on HP laptops. http://bugzilla.kernel.org/show_bug.cgi?id=11259 Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: support buggy BIOSes with _BCQ implementedZhang Rui
Some buggy BIOSes implements _BCQ instead of _BQC. Male ACPI video driver support these buggy BIOS. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: support _BQC/_BCL/_BCM methods that use index valuesZhang Rui
The input/output of _BQC/_BCL/_BCM control methods should be represented by a number between 0 and 100, and can be thought of as a percentage. But some buggy _BQC/_BCL/_BCM methods use the index values instead. http://bugzilla.kernel.org/show_bug.cgi?id=12302 http://bugzilla.kernel.org/show_bug.cgi?id=12249 http://bugzilla.kernel.org/show_bug.cgi?id=12037 Add the functionality to support such kind of BIOSes in ACPI video driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: support reversed _BCL method in ACPI video driverZhang Rui
The brightness levels returned by _BCL package are in a reversed order on some laptops. http://bugzilla.kernel.org/show_bug.cgi?id=12037 http://bugzilla.kernel.org/show_bug.cgi?id=12302 http://bugzilla.kernel.org/show_bug.cgi?id=12235 sort the _BCL packge in case it's reversed. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: support _BCL packages that don't export brightness levels when ↵Zhang Rui
machine is on AC/Battery Many buggy BIOSes don't export the brightness levels when machine is on AC/Battery in the _BCL method. Reformat the _BCL package for these laptops: now the elements in device->brightness->levels[] are like: levels[0]: brightness level when on AC power. levels[1]: brightness level when on Battery power. levels[2]: supported brightness level 1. levels[3]: supported brightness level 2. ... levels[n]: supported brightness level n-1. levels[n + 1]: supported brightness level n. So if there are n supported brightness levels on this laptop, we will have n+2 entries in device->brightnes->levels[]. level[0] and level[1] are invalid on the laptops that don't export the brightness levels on AC/Battery. Fortunately, we never use these two values at all, even for the valid ones. http://bugzilla.kernel.org/show_bug.cgi?id=12249 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: check the return value of acpi_video_device_lcd_set_levelZhang Rui
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI video: check the return value of acpi_video_device_lcd_get_level_currentZhang Rui
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-20thermal: use integers rather than strings for thermal valuesMatthew Garrett
The thermal API currently uses strings to pass values to userspace. This makes it difficult to use from within the kernel. Change the interface to use integers and fix up the consumers. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07Merge branches 'release', 'asus', 'bugzilla-12450', 'cpuidle', 'debug', ↵Len Brown
'ec', 'misc', 'printk' and 'processor' into release