aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2008-07-26Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: fix modular build ftrace: disable tracing on acpi idle calls ftrace: remove latency-tracer leftover ftrace: only trace preempt off with preempt tracer ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
2008-07-26ftrace: disable tracing on acpi idle callsSteven Rostedt
The acpi idle waits calls local_irq_save and then uses mwait to go into idle. The tracer gets reenabled at local_irq_save but does not detect that the idle allows for wake ups. This patch adds code to disable the tracing when acpi puts the CPU to idle. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24Merge branch 'release-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6 * 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on -ENOMEM ACPI: thinkpad-acpi: bump up version to 0.21 ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support ACPI: thinkpad-acpi: WLSW overrides other rfkill switches ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support ACPI: thinkpad-acpi: consolidate wlsw notification function ACPI: thinkpad-acpi: minor refactor on radio switch init Revert "ACPI: don't walk tables if ACPI was disabled" Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled." Revert "Fix FADT parsing" ACPI : Set FAN device to correct state in boot phase ACPI: Ignore _BQC object when registering backlight device ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors
2008-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fixup sparse endianness warnings in proc.c PCI PM: make more PCI PM core functionality available to drivers PCI/DMAR: don't assume presence of RMRRs PCI hotplug: fix error path in pci_slot's register_slot
2008-07-24pm: acpi pm: add DMI quirk list for ACPI 1.0 suspend orderingCarlos Corbacho
There are a few BIOSes that we know of already that need to use the ACPI 1.0 suspend order. This appears to be only be a small minority of mostly nVidia based systems. Based on observation of Windows behaviour, it's clear that Windows is also doing maintaining its own list of broken hardware that needs this workaround. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24pm: acpi hibernation: utilize hardware signatureShaohua Li
ACPI defines a hardware signature. BIOS calculates the signature according to hardware configure and if hardware changes while hibernated, the signature will change. In that case, S4 resume should fail. Still, there may be systems on which this mechanism does not work correctly, so it is better to provide a workaround for them. For this reason, add a new switch to the acpi_sleep= command line argument allowing one to disable hardware signature checking. [shaohua.li@intel.com: build fix] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: <Valdis.Kletnieks@vt.edu> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24move memory_read_from_buffer() from fs.h to string.hAkinobu Mita
James Bottomley warns that inclusion of linux/fs.h in a low level driver was always a danger signal. This patch moves memory_read_from_buffer() from fs.h to string.h and fixes includes in existing memory_read_from_buffer() users. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Bob Moore <robert.moore@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) NR_CPUS: Replace NR_CPUS in speedstep-centrino.c cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP NR_CPUS: Replace NR_CPUS in cpufreq userspace routines NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target cpumask: Provide a generic set of CPUMASK_ALLOC macros cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr Revert "cpumask: introduce new APIs" cpumask: make for_each_cpu_mask a bit smaller net: Pass reference to cpumask variable in net/sunrpc/svc.c ... Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-22PCI hotplug: fix error path in pci_slot's register_slotAlex Chiang
Juha Leppnen noticed that an error path in register_slot() wasn't returning appropriately, leading to a condition where we might access a kfree'ed pointer, so let's fix that. Additionally, fix up the copyright information in the file while we're in there. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-21driver core: fix a lot of printk usages of bus_idGreg Kroah-Hartman
We have the dev_printk() variants for this kind of thing, use them instead of directly trying to access the bus_id field of struct device. This is done in order to remove bus_id entirely. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=yIngo Molnar
-tip testing found the following boot crash on 32-bit x86 (Core2Duo laptop) yesterday: [ 5.606664] scsi4 : ata_piix [ 5.606664] scsi5 : ata_piix [ 5.606664] ACPI Error (psargs-0358): [\_SB_.PCI0.LPC_.EC__.BSTA] Namespace lookup failure, AE_NOT_FOUND [ 5.606664] ACPI Error (psparse-0530): ACPI Error (nsnames-0186): Invalid NS Node (f7c0e960) while traversing path [20080609] [ 5.606664] BUG: unable to handle kernel NULL pointer dereference at 0000000f [ 5.606664] IP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80 [ 5.609997] *pdpt = 0000000000a03001 *pde = 0000000000000000 [ 5.609997] Oops: 0002 [#1] SMP [ 5.609997] [ 5.609997] Pid: 1, comm: swapper Not tainted (2.6.26-tip-03965-gbbfb62e-dirty #3153) [ 5.609997] EIP: 0060:[<80339e2f>] EFLAGS: 00010286 CPU: 0 [ 5.609997] EIP is at acpi_ns_build_external_path+0x1f/0x80 [ 5.609997] EAX: f7c18c18 EBX: ffffffff ECX: 00000010 EDX: 00000000 [ 5.609997] ESI: f7c18c18 EDI: 00000010 EBP: f7c4dc28 ESP: f7c4dc18 [ 5.609997] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 5.609997] Process swapper (pid: 1, ti=f7c4c000 task=f7c50000 task.ti=f7c4c000) [ 5.609997] Stack: 00000000 00000000 f7c18c18 f7c4dc48 f7c4dc40 80339ed0 00000000 f7c18c18 [ 5.609997] 8084c1b6 8084c1b6 f7c4dc58 8033a60a 00000000 00000010 00000000 f7c18c18 [ 5.609997] f7c4dc70 8033a68f f7c18c18 00000000 f6de7600 00000005 f7c4dc98 8033c34d [ 5.609997] Call Trace: [ 5.609997] [<80339ed0>] ? acpi_ns_handle_to_pathname+0x40/0x72 [ 5.609997] [<8033a60a>] ? acpi_ns_print_node_pathname+0x2c/0x61 [ 5.609997] [<8033a68f>] ? acpi_ns_report_method_error+0x50/0x6d [ 5.609997] [<8033c34d>] ? acpi_ps_parse_aml+0x149/0x2f9 [ 5.609997] [<8033d6dd>] ? acpi_ps_execute_method+0x132/0x201 [ 5.609997] [<80339d19>] ? acpi_ns_evaluate+0x1ad/0x258 [ 5.609997] [<803406c4>] ? acpi_ut_evaluate_object+0x55/0x18f [ 5.609997] [<803408b7>] ? acpi_ut_execute_STA+0x22/0x7a [ 5.609997] [<8033a907>] ? acpi_get_object_info+0x131/0x1be [ 5.609997] [<80344bb2>] ? do_acpi_find_child+0x22/0x4b [ 5.609997] [<8033b855>] ? acpi_ns_walk_namespace+0xa5/0x124 [ 5.609997] [<803394f3>] ? acpi_walk_namespace+0x54/0x74 [ 5.609997] [<80344b90>] ? do_acpi_find_child+0x0/0x4b [ 5.609997] [<80344b85>] ? acpi_get_child+0x38/0x43 [ 5.609997] [<80344b90>] ? do_acpi_find_child+0x0/0x4b [ 5.609997] [<804d0148>] ? ata_acpi_associate+0xb5/0x1b5 [ 5.609997] [<804c6ecb>] ? ata_scsi_add_hosts+0x8e/0xdc [ 5.609997] [<804c40c8>] ? ata_host_register+0x9f/0x1d6 [ 5.609997] [<804cbc7f>] ? ata_pci_sff_activate_host+0x179/0x19f [ 5.609997] [<804cdd45>] ? ata_sff_interrupt+0x0/0x1c7 [ 5.609997] [<8069b033>] ? piix_init_one+0x569/0x5b0 [ 5.609997] [<801bd400>] ? sysfs_ilookup_test+0x0/0x11 [ 5.609997] [<801987d7>] ? ilookup5_nowait+0x29/0x30 [ 5.609997] [<802efc7e>] ? pci_match_device+0x99/0xa3 [ 5.609997] [<802efd3c>] ? pci_device_probe+0x39/0x59 [ 5.609997] [<803bc4af>] ? driver_probe_device+0xa0/0x11b [ 5.609997] [<803bc564>] ? __driver_attach+0x3a/0x59 [ 5.609997] [<803bbde3>] ? bus_for_each_dev+0x36/0x58 [ 5.609997] [<803bc354>] ? driver_attach+0x14/0x16 [ 5.609997] [<803bc52a>] ? __driver_attach+0x0/0x59 [ 5.609997] [<803bc161>] ? bus_add_driver+0x93/0x196 [ 5.609997] [<803bc773>] ? driver_register+0x71/0xcd [ 5.609997] [<802eff05>] ? __pci_register_driver+0x3f/0x6e [ 5.609997] [<809af7ff>] ? piix_init+0x14/0x24 [ 5.609997] [<80984568>] ? kernel_init+0x128/0x269 [ 5.609997] [<809af7eb>] ? piix_init+0x0/0x24 [ 5.609997] [<802e2758>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 5.609997] [<80116aef>] ? restore_nocheck_notrace+0x0/0xe [ 5.609997] [<80984440>] ? kernel_init+0x0/0x269 [ 5.609997] [<80984440>] ? kernel_init+0x0/0x269 [ 5.609997] [<80117d87>] ? kernel_thread_helper+0x7/0x10 [ 5.609997] ======================= [ 5.609997] Code: 75 02 b3 01 8d 43 01 8b 5d fc c9 c3 55 89 e5 57 89 cf 56 53 89 d3 4b 83 ec 04 83 fb 03 89 55 f0 77 09 c6 01 5c c6 41 01 00 eb 59 <c6> 04 19 00 8b 55 f0 8d 34 11 89 c2 eb 19 8b 42 08 83 eb 05 89 [ 5.609997] EIP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80 SS:ESP 0068:f7c4dc18 [ 5.613331] Kernel panic - not syncing: Fatal exception [ 5.613331] Rebooting in 1 seconds..[ 4.646664] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) I have bisected it down to: # bad: [5b664cbe] Merge branch 'upstream-linus' of git://git.kernel. # good: [bce7f795] Linux 2.6.26 # good: [e18425ab] Merge branch 'tracing/for-linus' of git://git.kern # good: [cadc7236] Merge branch 'bkl-removal' into next # good: [4515889a] Merge branch 'merge' of git://git.kernel.org/pub/s # good: [42fdd14e] Merge git://git.kernel.org/pub/scm/linux/kernel/gi # good: [8a0ca91f] Merge branch 'for-linus' of git://git.kernel.org/p # bad: [0af4b8cb] ACPI: Introduce new device wakeup flag 'prepared' # good: [fe997407] PCI: construct one fakephp slot per PCI slot # bad: [531f254a] PCIE: aer: use dev_printk when possible # bad: [15650a20] x86/PCI: fixup early quirk probing # good: [0e6859d9] ACPI PM: Remove obsolete Toshiba workaround # bad: [8344b566] PCI: ACPI PCI slot detection driver # good: [f46753c9] PCI: introduce pci_slot | 8344b568f5bdc7ee1bba909de3294c6348c36056 is first bad commit | commit 8344b568f5bdc7ee1bba909de3294c6348c36056 | Author: Alex Chiang <achiang@hp.com> | Date: Tue Jun 10 15:30:42 2008 -0600 | | PCI: ACPI PCI slot detection driver | | Detect all physical PCI slots as described by ACPI, and create entries in | /sys/bus/pci/slots/. I.e. the new CONFIG_ACPI_PCI_SLOT=y option was causing this crash. But the bug is not mainly in this new PCI code - that code was just hitting the ACPI code in a new way which made ACPI break. The crash signature shows that we are crashing on this instruction: movb $0x0, (%ecx, %ebx, 1) ECX and EBX are 0x10 and -1. It's this line in drivers/acpi/namespace/nsnames.c's acpi_ns_build_external_path(): name_buffer[index] = 0; I.e. name_buffer is 0x10 and index is -1. index -1 corresponds to size 0, and name_buffer 0x10 is slab's ZERO_SIZE_PTR special-case for zero-sized allocations. I.e. when we called acpi_ns_handle_to_pathname(), we got required_size of 0 due to an error condition, but this is passed to the ACPI allocator unconditionally: required_size = acpi_ns_get_pathname_length(node); /* Validate/Allocate/Clear caller buffer */ status = acpi_ut_initialize_buffer(buffer, required_size); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } Where acpi_ut_initialize_buffer(), through many (unnecessary) layers, ends up calling kzalloc(0). Which returns 0x10 and that then causes the crash later on. So fix both callers of acpi_ns_get_pathname_length(), which can return 0 in case of an invalid node. Also add a WARN_ON() against zero sized allocations in acpi_ut_initialize_buffer() to make it easier to find similar instances of this bug. I have tested this patch for the past 24 hours and the crash has not reappeared. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-21Merge branch 'linus' into cpus4096-for-linusIngo Molnar
Conflicts: net/sunrpc/svc.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20APCI: revert another duplicated patchThomas Gleixner
commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk tables if ACPI was disabled") is another superfluous duplicate commit caused by git -> quilt -> git conversion. Revert it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20APCI: revert duplicated patchThomas Gleixner
commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") was merged between 2.6.26-rc8 and -rc9) Due to rebasing the ACPI tree via quilt the same patch got applied again via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") Revert it, as it is obviously bogus. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-18cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptrMike Travis
* This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: drivers/acpi/processor_throttling.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Revert "ACPI: don't walk tables if ACPI was disabled"Andi Kleen
This reverts commit d1857056904d5f313f11184fcfa624652ff9620a. Double commit, noticed by Thomas Gleixner. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18Merge branch 'merge' into release-2.6.27Andi Kleen
2008-07-18Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled."Andi Kleen
Revert double commit by mistake. Noticed by Thomas Gleixner. This reverts commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18Revert "Fix FADT parsing"Andi Kleen
This reverts commit 01a5bba576b9364b33f61f0cd9fa70c2cf5535e2. There seem to be some FADTs around with bogus information in the v2 fields. Revert this patch for now until this can be properly resolved. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI : Set FAN device to correct state in boot phaseZhao Yakui
Subject:ACPI: Set FAN device to correct state in boot phase From: Zhao Yakui <yakui.zhao@intel.com> On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be turned on. But if the temperature is below the threshold, the corresponding FAN device should be turned off in the course of loading thermal driver. So it is necessary to set the FAN device to the correct state in course of loading the thermal driver. http://bugzilla.kernel.org/show_bug.cgi?id=8049 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI: Ignore _BQC object when registering backlight deviceZhao Yakui
According to acpi spec , the objectes of _BCL and _BCM are required if integrated LCD is present and supports brightness level and the _BQC is the optional object. So the _BQC object will be ignored when the backlight device is registered. At the same time when there is no _BQC object, the current brightness will be set to the maximum. http://bugzilla.kernel.org/show_bug.cgi?id=10206 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptorsBjorn Helgaas
Silently ignore _PRS End Tags. We already ignore Start Dependent Functions in _PRS, and we already ignore End Tags in _CRS, so we might as well ignore End Tags in _PRS as well. Silently ignore _PRS IRQ descriptors that mention no interrupts. The spec allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the interrupt link can't be configured at all. This patch doesn't change any functional behavior; it just removes confusing complaints like these: ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual Pentium IV Xeon 2.40 GHz machine. For more details, see http://bugzilla.kernel.org/show_bug.cgi?id=11049 The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18"). The "79 00" is an End Tag (type 0x7). It is superfluous since there is no Start Dependent Function tag and there are no resources after it, but it is harmless. Thanks to Gabriele Trombetti <g.trombetti.lkrnl1213@logicschema.com> (aka Kurk) for reporting this and testing the patch. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16Fix FADT parsingJan Beulich
The (1.0 inherited) separate length fields in the FADT are byte granular. Further, PM1a/b may have distinct lengths and live in distinct address spaces. acpi_tb_convert_fadt() should account for all of these conditions. Apart from these changes I'm puzzled by the fact that, not just for acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit size passed rather than using the size found in the passed GAS. What happens on a platform that defines PM1{a,b} wider than 16 bits? Of course, acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or access_width... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.Aaron Durbin
Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16ACPI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). The most obvious change will be messages like this: -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31 +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: video: fix brightness allocationJulia Jomantaite
Fix use of uninitialized device->brightness. Signed-off-by: Julia Jomantaite <julia.jomantaite@gmail.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI: Disable MWAIT via DMI on broken Compal boardZhao Yakui
If a system matches in this DMI table, Linux will disable MWAIT support for idle. ie. "idle=nomwait" is automatically invoked and C1_FFH and C2C3_FFH access mode are disabled. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI : Create "idle=nomwait" bootparamZhao Yakui
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Create "idle=halt" bootparamZhao Yakui
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from ↵Zhang Rui
user-space Allow users to enable/disable/clear a specific & valid GPE/Fixed Event in user space. This is useful for debugging, especially for some interrupt storm issues. All wakeup GPEs are disabled and they can not be enabled at runtime, and we mark them as invalid. All GPEs that don't have a _Lxx/_Exx method are marked as invalid. All Fixed Events that don't have an event handler are marked as invalid and they can't be enabled until an event handler is registered. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ling Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix mutex debug code for wrong loop termination valueBob Moore
Loop was terminating one iteration early, missing one of the debugger handshake mutexes. Linn Crosetto. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Cleanup of _PRT parsing codeBob Moore
Removed extraneous else clauses, other general cleanup. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Cleanup debug operand dump mechanismBob Moore
Eliminated unnecessary operands; eliminated use of negative index in loop. Operands now displayed in correct order, not backwards. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix for invalid large array index on 64-bit systemsBob Moore
This problem was introduced in 20080514 as a result of the elimination of the acpi_native_uint type. Code uses a negative array index, which should be eliminated. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Update DMAR and SRAT table definitionsBob Moore
Synchronized tables with current specifications. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Workaround for reversed _PRT entries from BIOSBob Moore
Some BIOSs erroneously reverse the _PRT SourceName and the SourceIndex. Detect and repair this problem. MS ACPI also allows and repairs this problem, thus ACPICA must also. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Add const qualifier for appropriate string constantsBob Moore
Mostly MODULE_NAME and printf format strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Several lint changes, no functional changesBob Moore
Remove pointer cast warnings and fix for a debug printf. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Removed unused include files from source filesBob Moore
From lint. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Eliminate acpi_native_uint type v2Bob Moore
No longer needed; replaced mostly with u32, but also acpi_size where a type that changes 32/64 bit on 32/64-bit platforms is required. v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning. from David Howells Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix possible negative array index in acpi_ut_validate_exceptionBob Moore
Added NULL fields to the exception string arrays to eliminate the -1 subtraction on the SubStatus field. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix for hang on GPE method invocationBob Moore
Fixes problem where the new method argument count validation mechanism will enter an infinite loop when a GPE method is dispatched. Problem fixed be removing the obsolete code that passes GPE block information to the notify handler via the control method parameter pointer. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Add argument count checking to control method invocation via ↵Bob Moore
acpi_evaluate_object Error if too few arguments, warning if too many. This applies only to external programmatic control method execution, not method-to-method calls within the AML. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI PM: Remove obsolete Toshiba workaroundRafael J. Wysocki
Remove the obsolete workaround for a Toshiba Satellite 4030cdt S1 problem from drivers/acpi/sleep/main.c . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI PM: acpi_pm_device_sleep_state() cleanupDavid Brownell
Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.Len Brown
Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: don't walk tables if ACPI was disabledVegard Nossum
Ingo Molnar wrote: > -tip auto-testing started triggering this spinlock corruption message > yesterday: > > [ 3.976213] calling acpi_rtc_init+0x0/0xd3 > [ 3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321] > [ 3.992213] BUG: spinlock bad magic on CPU#0, swapper/1 > [ 3.992213] lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0 This is apparently because some parts of ACPI, including mutexes, are not initialized when acpi=off is passed to the kernel. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16Make GPE disable more robustBob Moore
Implemented another change for the GPE disable. We now perform a read-change-write of the enable register instead of simply writing out the cached enable mask. This will prevent inadvertent enabling of GPEs if a rogue GPE is received during initialization (before GPE handlers are installed.) http://bugzilla.kernel.org/show_bug.cgi?id=6217 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>