aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/libata-sff.c
AgeCommit message (Collapse)Author
2007-02-26[libata] Trim trailing whitespace.Jeff Garzik
No code changes. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: s/ap->id/ap->print_id/gTejun Heo
ata_port has two different id fields - id and port_no. id is system-wide 1-based unique id for the port while port_no is 0-based host-wide port number. The former is primarily used to identify the ATA port to the user in printk messages while the latter is used in various places in libata core and LLDs to index the port inside the host. The two fields feel quite similar and sometimes ap->id is used in place of ap->port_no, which is very difficult to spot. This patch renames ap->id to ap->print_id to reduce the possibility of such bugs. Some printk messages are adjusted such that id string (ata%u[.%u]) isn't printed twice and/or to use ata_*_printk() instead of hardcoded id format. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: add another IRQ calls (core and headers)Akira Iguchi
This patch is against the libata core and headers. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: convert to iomapTejun Heo
Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: update libata core layer to use devresTejun Heo
Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: trivial stuffAlan
Readability/typos etc Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata-sff: Don't try and activate channels which are not in useAlan
An ATA controller in native mode may have one or more channels disabled and not assigned resources. In that case the existing code crashes trying to access I/O ports 0-7. Add the neccessary check. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26Fix Maple PATA IRQ assignment.David Woodhouse
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25libata-sff: Don't call bmdma_stop on non DMA capable controllersAlan
Fixes bogus accesses to ports 0-15 with a non DMA capable controller. This I think should go in for 2.6.20 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uliTejun Heo
Some uli controllers have stuck SIMPLEX bit which can't be cleared with ata_pci_clear_simplex(), but the controller is capable of doing DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX which makes libata ignore the simplex bit and use it in sata_uli. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-02[PATCH] libata: fix combined modeAlan
This is a slight variant on the patch I posted December 16th to fix libata combined mode handling. The only real change is that we now correctly also reserve BAR1,2,4. That is basically a neatness issue. Jeff was unhappy about two things 1. That it didn't work in the case of one channel native one channel legacy. This is a silly complaint because the SFF layer in libata doesn't handle this case yet anyway. 2. The case where combined mode is in use and IDE=n. In this case the libata quirk code reserves the resources in question correctly already. Once the combined mode stuff is redone properly (2.6.21) then the entire mess turns into a single pci_request_regions() for all cases and all the ugly resource hackery goes away. I'm sending this now rather than after running full test suites so that it can get the maximal testing in a short time. I'll be running tests on this after lunch. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by: Theodore Tso <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-03[PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()Tejun Heo
Now that BMDMA status is recorded in irq handler. ata_bmdma_freeze() is free to manipulate host status. Under certain circumstances, some controllers (ICH7 in enhanced mode w/ IRQ shared) raise IRQ when CTL register is written to and ATA_NIEN doesn't mask it. This patch makes ata_bmdma_freeze() clear all pending IRQs after freezing a port. This change makes explicit clearing in ata_device_add() unnecessary and thus kills it. The removed code was SFF-specific and was in the wrong place. Note that ->freeze() handler is always called under ap->lock held and irq disabled. Even if CTL manipulation causes stuck IRQ, it's cleared immediately. This should be safe (enough) even in SMP environment. More correct solution is to mask the IRQ from IRQ controller but that would be an overkill. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: move BMDMA host status recording from EH to interrupt handlerTejun Heo
For certain errors, interrupt handler alter BMDMA host status before entering EH (clears active and intr). Thus altered BMDMA host status value is recorded by BMDMA EH and reported to user. Move BMDMA host status recording from EH to interrupt handler. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03[PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQsTejun Heo
There are machines out there which share legacy PCI IDE IRQs w/ other devices. libata SFF interrupt/HSM code is ready for shared IRQ and has been setting IRQF_SHARED for devices in native PCI mode. Device in legacy mode is still a PCI device and thus supposedly uses active-low level triggered IRQ. Machines with such setup should be quite rare and w/o this flag libata is likely to fail loading and render the system unuseable. Also, IDE driver has been setting IRQF_SHARED for devices in legacy mode for a looooong time. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-01[PATCH] libata: move ata_irq_on() into libata-sff.cTejun Heo
ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] sata_nv ADMA/NCQ support for nForce4Robert Hancock
This patch adds support for ADMA mode on NVIDIA nForce4 (CK804/MCP04) SATA controllers to the sata_nv driver. Benefits of ADMA mode include: - NCQ support - Reduced CPU overhead (controller DMAs command information from memory instead of them being pushed in by the CPU) - Full 64-bit DMA support ADMA mode is enabled by default in this version. To disable it, set the module parameter adma_enabled=0. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] libata-sff: Allow for wacky systemsAlan Cox
There are some Linux supported platforms that simply cannot hit the low I/O addresses used by ATA legacy mode PCI mappings. These platforms have a window for PCI space that is fixed by the board logic and doesn't include the neccessary locations. Provide a config option so that such platforms faced with a controller that they cannot support simply error it and punt Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28[libata] init probe_ent->private_data in a common locationJeff Garzik
Don't write the same code twice, in two different functions, when they both call the same initialization function, with the same private_data pointer info. Also, note a bug found with a FIXME. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28[libata] minor PCI IDE probe fixes and cleanupsJeff Garzik
* Replace needless 'n_ports > 2' check with a simple BUG_ON(). No existing driver ever wants more than 2 ports. * Delete ATA_FLAG_NO_LEGACY check. No current driver uses ata_pci_init_one(), that sets this flag. * Move PCI_CLASS_PROG register read below pci_enable_device() * Handle ata_device_add() failure Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-26[libata] One more s/15/ATA_SECONDARY_IRQ/ substitutionJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-26[PATCH] libata-sff: use our IRQ definesAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-19[PATCH] libata: fix non-uniform ports handlingTejun Heo
Non-uniform ports handling got broken while updating libata to handle those in the same host. Only separate irq for the non-uniform secondary port was implemented while all other fields (host flags, transfer mode...) of the secondary port simply shared those of the first. For ata_piix combined mode, which ATM is the only user of non-uniform ports, this causes the secondary port assume the wrong type. This can cause PATA port to use SATA ops, which results in bogus check on PCS and detection failure. This patch adds ata_probe_ent->pinfo2 which points to optional port_info for the secondary port. For the time being, this seems to be the simplest solution. This workaround will be removed together with ata_probe_ent itself after init model is updated to allow more flexibility. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Nelson A. de Oliveira <naoliv@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-19Merge branch 'tmp' into upstreamJeff Garzik
Conflicts: drivers/ata/libata-sff.c
2006-08-24Rename libata-bmdma.c to libata-sff.c.Jeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>